#include <asm/uaccess.h>
#include <asm/unistd.h>
-#include "timeconst.h"
+#include <generated/timeconst.h>
#include "timekeeping.h"
/*
return error;
if (tz) {
+ /* Verify we're witin the +-15 hrs range */
+ if (tz->tz_minuteswest > 15*60 || tz->tz_minuteswest < -15*60)
+ return -EINVAL;
+
sys_tz = *tz;
update_vsyscall_tz();
if (firsttime) {
unsigned int jiffies_to_usecs(const unsigned long j)
{
-#if HZ <= USEC_PER_SEC && !(USEC_PER_SEC % HZ)
+ /*
+ * Hz usually doesn't go much further MSEC_PER_SEC.
+ * jiffies_to_usecs() and usecs_to_jiffies() depend on that.
+ */
+ BUILD_BUG_ON(HZ > USEC_PER_SEC);
+
+#if !(USEC_PER_SEC % HZ)
return (USEC_PER_SEC / HZ) * j;
-#elif HZ > USEC_PER_SEC && !(HZ % USEC_PER_SEC)
- return (j + (HZ / USEC_PER_SEC) - 1)/(HZ / USEC_PER_SEC);
#else
# if BITS_PER_LONG == 32
return (HZ_TO_USEC_MUL32 * j) >> HZ_TO_USEC_SHR32;
* @t: Timespec
* @gran: Granularity in ns.
*
- * Truncate a timespec to a granularity. gran must be smaller than a second.
- * Always rounds down.
- *
- * This function should be only used for timestamps returned by
- * current_kernel_time() or CURRENT_TIME, not with do_gettimeofday() because
- * it doesn't handle the better resolution of the latter.
+ * Truncate a timespec to a granularity. Always rounds down. gran must
+ * not be 0 nor greater than a second (NSEC_PER_SEC, or 10^9 ns).
*/
struct timespec timespec_trunc(struct timespec t, unsigned gran)
{
- /*
- * Division is pretty slow so avoid it for common cases.
- * Currently current_kernel_time() never returns better than
- * jiffies resolution. Exploit that.
- */
- if (gran <= jiffies_to_usecs(1) * 1000) {
+ /* Avoid division in the common cases 1 ns and 1 s. */
+ if (gran == 1) {
/* nothing */
- } else if (gran == 1000000000) {
+ } else if (gran == NSEC_PER_SEC) {
t.tv_nsec = 0;
- } else {
+ } else if (gran > 1 && gran < NSEC_PER_SEC) {
t.tv_nsec -= t.tv_nsec % gran;
+ } else {
+ WARN(1, "illegal file time granularity: %u", gran);
}
return t;
}
}
EXPORT_SYMBOL(ns_to_timespec64);
#endif
-/*
- * When we convert to jiffies then we interpret incoming values
- * the following way:
+/**
+ * msecs_to_jiffies: - convert milliseconds to jiffies
+ * @m: time in milliseconds
+ *
+ * conversion is done as follows:
*
* - negative values mean 'infinite timeout' (MAX_JIFFY_OFFSET)
*
* MAX_JIFFY_OFFSET values] mean 'infinite timeout' too.
*
* - all other values are converted to jiffies by either multiplying
- * the input value by a factor or dividing it with a factor
- *
- * We must also be careful about 32-bit overflows.
+ * the input value by a factor or dividing it with a factor and
+ * handling any 32-bit overflows.
+ * for the details see __msecs_to_jiffies()
+ *
+ * msecs_to_jiffies() checks for the passed in value being a constant
+ * via __builtin_constant_p() allowing gcc to eliminate most of the
+ * code, __msecs_to_jiffies() is called if the value passed does not
+ * allow constant folding and the actual conversion must be done at
+ * runtime.
+ * the _msecs_to_jiffies helpers are the HZ dependent conversion
+ * routines found in include/linux/jiffies.h
*/
-unsigned long msecs_to_jiffies(const unsigned int m)
+unsigned long __msecs_to_jiffies(const unsigned int m)
{
/*
* Negative value, means infinite timeout:
*/
if ((int)m < 0)
return MAX_JIFFY_OFFSET;
-
-#if HZ <= MSEC_PER_SEC && !(MSEC_PER_SEC % HZ)
- /*
- * HZ is equal to or smaller than 1000, and 1000 is a nice
- * round multiple of HZ, divide with the factor between them,
- * but round upwards:
- */
- return (m + (MSEC_PER_SEC / HZ) - 1) / (MSEC_PER_SEC / HZ);
-#elif HZ > MSEC_PER_SEC && !(HZ % MSEC_PER_SEC)
- /*
- * HZ is larger than 1000, and HZ is a nice round multiple of
- * 1000 - simply multiply with the factor between them.
- *
- * But first make sure the multiplication result cannot
- * overflow:
- */
- if (m > jiffies_to_msecs(MAX_JIFFY_OFFSET))
- return MAX_JIFFY_OFFSET;
-
- return m * (HZ / MSEC_PER_SEC);
-#else
- /*
- * Generic case - multiply, round and divide. But first
- * check that if we are doing a net multiplication, that
- * we wouldn't overflow:
- */
- if (HZ > MSEC_PER_SEC && m > jiffies_to_msecs(MAX_JIFFY_OFFSET))
- return MAX_JIFFY_OFFSET;
-
- return (MSEC_TO_HZ_MUL32 * m + MSEC_TO_HZ_ADJ32)
- >> MSEC_TO_HZ_SHR32;
-#endif
+ return _msecs_to_jiffies(m);
}
-EXPORT_SYMBOL(msecs_to_jiffies);
+EXPORT_SYMBOL(__msecs_to_jiffies);
-unsigned long usecs_to_jiffies(const unsigned int u)
+unsigned long __usecs_to_jiffies(const unsigned int u)
{
if (u > jiffies_to_usecs(MAX_JIFFY_OFFSET))
return MAX_JIFFY_OFFSET;
-#if HZ <= USEC_PER_SEC && !(USEC_PER_SEC % HZ)
- return (u + (USEC_PER_SEC / HZ) - 1) / (USEC_PER_SEC / HZ);
-#elif HZ > USEC_PER_SEC && !(HZ % USEC_PER_SEC)
- return u * (HZ / USEC_PER_SEC);
-#else
- return (USEC_TO_HZ_MUL32 * u + USEC_TO_HZ_ADJ32)
- >> USEC_TO_HZ_SHR32;
-#endif
+ return _usecs_to_jiffies(u);
}
-EXPORT_SYMBOL(usecs_to_jiffies);
+EXPORT_SYMBOL(__usecs_to_jiffies);
/*
* The TICK_NSEC - 1 rounds up the value to the next resolution. Note
* value to a scaled second value.
*/
static unsigned long
-__timespec_to_jiffies(unsigned long sec, long nsec)
+__timespec64_to_jiffies(u64 sec, long nsec)
{
nsec = nsec + TICK_NSEC - 1;
sec = MAX_SEC_IN_JIFFIES;
nsec = 0;
}
- return (((u64)sec * SEC_CONVERSION) +
+ return ((sec * SEC_CONVERSION) +
(((u64)nsec * NSEC_CONVERSION) >>
(NSEC_JIFFIE_SC - SEC_JIFFIE_SC))) >> SEC_JIFFIE_SC;
}
-unsigned long
-timespec_to_jiffies(const struct timespec *value)
+static unsigned long
+__timespec_to_jiffies(unsigned long sec, long nsec)
{
- return __timespec_to_jiffies(value->tv_sec, value->tv_nsec);
+ return __timespec64_to_jiffies((u64)sec, nsec);
}
-EXPORT_SYMBOL(timespec_to_jiffies);
+unsigned long
+timespec64_to_jiffies(const struct timespec64 *value)
+{
+ return __timespec64_to_jiffies(value->tv_sec, value->tv_nsec);
+}
+EXPORT_SYMBOL(timespec64_to_jiffies);
void
-jiffies_to_timespec(const unsigned long jiffies, struct timespec *value)
+jiffies_to_timespec64(const unsigned long jiffies, struct timespec64 *value)
{
/*
* Convert jiffies to nanoseconds and separate with
NSEC_PER_SEC, &rem);
value->tv_nsec = rem;
}
-EXPORT_SYMBOL(jiffies_to_timespec);
+EXPORT_SYMBOL(jiffies_to_timespec64);
/*
* We could use a similar algorithm to timespec_to_jiffies (with a
Code Review / kvmfornfv.git / blobdiff