* Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
* Copyright 2007-2010 Johannes Berg <johannes@sipsolutions.net>
* Copyright 2013-2014 Intel Mobile Communications GmbH
+ * Copyright (C) 2015 Intel Deutschland GmbH
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* enum ieee80211_event_type - event to be notified to the low level driver
* @RSSI_EVENT: AP's rssi crossed the a threshold set by the driver.
* @MLME_EVENT: event related to MLME
+ * @BAR_RX_EVENT: a BAR was received
+ * @BA_FRAME_TIMEOUT: Frames were released from the reordering buffer because
+ * they timed out. This won't be called for each frame released, but only
+ * once each time the timeout triggers.
*/
enum ieee80211_event_type {
RSSI_EVENT,
MLME_EVENT,
+ BAR_RX_EVENT,
+ BA_FRAME_TIMEOUT,
};
/**
u16 reason;
};
+/**
+ * struct ieee80211_ba_event - data attached for BlockAck related events
+ * @sta: pointer to the &ieee80211_sta to which this event relates
+ * @tid: the tid
+ * @ssn: the starting sequence number (for %BAR_RX_EVENT)
+ */
+struct ieee80211_ba_event {
+ struct ieee80211_sta *sta;
+ u16 tid;
+ u16 ssn;
+};
+
/**
* struct ieee80211_event - event to be sent to the driver
* @type: The event itself. See &enum ieee80211_event_type.
* @rssi: relevant if &type is %RSSI_EVENT
* @mlme: relevant if &type is %AUTH_EVENT
- * @u: union holding the above two fields
+ * @ba: relevant if &type is %BAR_RX_EVENT or %BA_FRAME_TIMEOUT
+ * @u:union holding the fields above
*/
struct ieee80211_event {
enum ieee80211_event_type type;
union {
struct ieee80211_rssi_event rssi;
struct ieee80211_mlme_event mlme;
+ struct ieee80211_ba_event ba;
} u;
};
* @ibss_creator: indicates if a new IBSS network is being created
* @aid: association ID number, valid only when @assoc is true
* @use_cts_prot: use CTS protection
- * @use_short_preamble: use 802.11b short preamble;
- * if the hardware cannot handle this it must set the
- * IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE hardware flag
- * @use_short_slot: use short slot time (only relevant for ERP);
- * if the hardware cannot handle this it must set the
- * IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE hardware flag
+ * @use_short_preamble: use 802.11b short preamble
+ * @use_short_slot: use short slot time (only relevant for ERP)
* @dtim_period: num of beacons before the next DTIM, for beaconing,
* valid in station mode only if after the driver was notified
* with the %BSS_CHANGED_BEACON_INFO flag, will be non-zero then.
* @chandef: Channel definition for this BSS -- the hardware might be
* configured a higher bandwidth than this BSS uses, for example.
* @ht_operation_mode: HT operation mode like in &struct ieee80211_ht_operation.
- * This field is only valid when the channel type is one of the HT types.
+ * This field is only valid when the channel is a wide HT/VHT channel.
+ * Note that with TDLS this can be the case (channel is HT, protection must
+ * be used from this field) even when the BSS association isn't using HT.
* @cqm_rssi_thold: Connection quality monitor RSSI threshold, a zero value
- * implies disabled
+ * implies disabled. As with the cfg80211 callback, a change here should
+ * cause an event to be sent indicating where the current value is in
+ * relation to the newly configured threshold.
* @cqm_rssi_hyst: Connection quality monitor RSSI hysteresis
* @arp_addr_list: List of IPv4 addresses for hardware ARP filtering. The
* may filter ARP queries targeted for other addresses than listed here.
u32 flags;
/* 4 bytes free */
} control;
+ struct {
+ u64 cookie;
+ } ack;
struct {
struct ieee80211_tx_rate rates[IEEE80211_TX_MAX_RATES];
s32 ack_signal;
* @RX_FLAG_IV_STRIPPED: The IV/ICV are stripped from this frame.
* If this flag is set, the stack cannot do any replay detection
* hence the driver or hardware will have to do that.
+ * @RX_FLAG_PN_VALIDATED: Currently only valid for CCMP/GCMP frames, this
+ * flag indicates that the PN was verified for replay protection.
+ * Note that this flag is also currently only supported when a frame
+ * is also decrypted (ie. @RX_FLAG_DECRYPTED must be set)
* @RX_FLAG_FAILED_FCS_CRC: Set this flag if the FCS check failed on
* the frame.
* @RX_FLAG_FAILED_PLCP_CRC: Set this flag if the PCLP check failed on
* @RX_FLAG_AMPDU_DETAILS: A-MPDU details are known, in particular the reference
* number (@ampdu_reference) must be populated and be a distinct number for
* each A-MPDU
- * @RX_FLAG_AMPDU_REPORT_ZEROLEN: driver reports 0-length subframes
- * @RX_FLAG_AMPDU_IS_ZEROLEN: This is a zero-length subframe, for
- * monitoring purposes only
* @RX_FLAG_AMPDU_LAST_KNOWN: last subframe is known, should be set on all
* subframes of a single A-MPDU
* @RX_FLAG_AMPDU_IS_LAST: this subframe is the last subframe of the A-MPDU
RX_FLAG_NO_SIGNAL_VAL = BIT(12),
RX_FLAG_HT_GF = BIT(13),
RX_FLAG_AMPDU_DETAILS = BIT(14),
- RX_FLAG_AMPDU_REPORT_ZEROLEN = BIT(15),
- RX_FLAG_AMPDU_IS_ZEROLEN = BIT(16),
+ RX_FLAG_PN_VALIDATED = BIT(15),
+ /* bit 16 free */
RX_FLAG_AMPDU_LAST_KNOWN = BIT(17),
RX_FLAG_AMPDU_IS_LAST = BIT(18),
RX_FLAG_AMPDU_DELIM_CRC_ERROR = BIT(19),
* @flags: configuration flags defined above
*
* @listen_interval: listen interval in units of beacon interval
- * @max_sleep_period: the maximum number of beacon intervals to sleep for
- * before checking the beacon for a TIM bit (managed mode only); this
- * value will be only achievable between DTIM frames, the hardware
- * needs to check for the multicast traffic bit in DTIM beacons.
- * This variable is valid only when the CONF_PS flag is set.
* @ps_dtim_period: The DTIM period of the AP we're connected to, for use
* in power saving. Power saving will not be enabled until a beacon
* has been received and the DTIM period is known.
struct ieee80211_conf {
u32 flags;
int power_level, dynamic_ps_timeout;
- int max_sleep_period;
u16 listen_interval;
u8 ps_dtim_period;
* @debugfs_dir: debugfs dentry, can be used by drivers to create own per
* interface debug files. Note that it will be NULL for the virtual
* monitor interface (if that is requested.)
+ * @probe_req_reg: probe requests should be reported to mac80211 for this
+ * interface.
* @drv_priv: data area for driver use, will always be aligned to
* sizeof(void *).
* @txq: the multicast data TX queue (if driver uses the TXQ abstraction)
struct dentry *debugfs_dir;
#endif
+ unsigned int probe_req_reg;
+
/* must be last */
u8 drv_priv[0] __aligned(sizeof(void *));
};
* wants to be given when a frame is transmitted and needs to be
* encrypted in hardware.
* @cipher: The key's cipher suite selector.
+ * @tx_pn: PN used for TX on non-TKIP keys, may be used by the driver
+ * as well if it needs to do software PN assignment by itself
+ * (e.g. due to TSO)
* @flags: key flags, see &enum ieee80211_key_flags.
* @keyidx: the key index (0-3)
* @keylen: key material length
* @iv_len: The IV length for this key type
*/
struct ieee80211_key_conf {
+ atomic64_t tx_pn;
u32 cipher;
u8 icv_len;
u8 iv_len;
u8 key[0];
};
+#define IEEE80211_MAX_PN_LEN 16
+
+/**
+ * struct ieee80211_key_seq - key sequence counter
+ *
+ * @tkip: TKIP data, containing IV32 and IV16 in host byte order
+ * @ccmp: PN data, most significant byte first (big endian,
+ * reverse order than in packet)
+ * @aes_cmac: PN data, most significant byte first (big endian,
+ * reverse order than in packet)
+ * @aes_gmac: PN data, most significant byte first (big endian,
+ * reverse order than in packet)
+ * @gcmp: PN data, most significant byte first (big endian,
+ * reverse order than in packet)
+ * @hw: data for HW-only (e.g. cipher scheme) keys
+ */
+struct ieee80211_key_seq {
+ union {
+ struct {
+ u32 iv32;
+ u16 iv16;
+ } tkip;
+ struct {
+ u8 pn[6];
+ } ccmp;
+ struct {
+ u8 pn[6];
+ } aes_cmac;
+ struct {
+ u8 pn[6];
+ } aes_gmac;
+ struct {
+ u8 pn[6];
+ } gcmp;
+ struct {
+ u8 seq[IEEE80211_MAX_PN_LEN];
+ u8 seq_len;
+ } hw;
+ };
+};
+
/**
* struct ieee80211_cipher_scheme - cipher scheme
*
* @sta: station table entry, %NULL for per-vif queue
* @tid: the TID for this queue (unused for per-vif queue)
* @ac: the AC for this queue
- * @drv_priv: data area for driver use, will always be aligned to
- * sizeof(void *).
+ * @drv_priv: driver private area, sized by hw->txq_data_size
*
* The driver can obtain packets from this queue by calling
* ieee80211_tx_dequeue().
* multicast frames when there are power saving stations so that
* the driver can fetch them with ieee80211_get_buffered_bc().
*
- * @IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE:
- * Hardware is not capable of short slot operation on the 2.4 GHz band.
- *
- * @IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE:
- * Hardware is not capable of receiving frames with short preamble on
- * the 2.4 GHz band.
- *
* @IEEE80211_HW_SIGNAL_UNSPEC:
* Hardware can provide signal values but we don't know its units. We
* expect values between 0 and @max_signal.
* the driver returns 1. This also forces the driver to advertise its
* supported cipher suites.
*
+ * @IEEE80211_HW_SUPPORT_FAST_XMIT: The driver/hardware supports fast-xmit,
+ * this currently requires only the ability to calculate the duration
+ * for frames.
+ *
* @IEEE80211_HW_QUEUE_CONTROL: The driver wants to control per-interface
* queue mapping in order to use different queues (not just one per AC)
* for different virtual interfaces. See the doc section on HW queue
* @IEEE80211_HW_SUPPORTS_CLONED_SKBS: The driver will never modify the payload
* or tailroom of TX skbs without copying them first.
*
- * @IEEE80211_SINGLE_HW_SCAN_ON_ALL_BANDS: The HW supports scanning on all bands
+ * @IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS: The HW supports scanning on all bands
* in one command, mac80211 doesn't have to run separate scans per band.
+ *
+ * @IEEE80211_HW_TDLS_WIDER_BW: The device/driver supports wider bandwidth
+ * than then BSS bandwidth for a TDLS link on the base channel.
+ *
+ * @IEEE80211_HW_SUPPORTS_AMSDU_IN_AMPDU: The driver supports receiving A-MSDUs
+ * within A-MPDU.
+ *
+ * @IEEE80211_HW_BEACON_TX_STATUS: The device/driver provides TX status
+ * for sent beacons.
+ *
+ * @NUM_IEEE80211_HW_FLAGS: number of hardware flags, used for sizing arrays
*/
enum ieee80211_hw_flags {
- IEEE80211_HW_HAS_RATE_CONTROL = 1<<0,
- IEEE80211_HW_RX_INCLUDES_FCS = 1<<1,
- IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING = 1<<2,
- IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE = 1<<3,
- IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE = 1<<4,
- IEEE80211_HW_SIGNAL_UNSPEC = 1<<5,
- IEEE80211_HW_SIGNAL_DBM = 1<<6,
- IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC = 1<<7,
- IEEE80211_HW_SPECTRUM_MGMT = 1<<8,
- IEEE80211_HW_AMPDU_AGGREGATION = 1<<9,
- IEEE80211_HW_SUPPORTS_PS = 1<<10,
- IEEE80211_HW_PS_NULLFUNC_STACK = 1<<11,
- IEEE80211_HW_SUPPORTS_DYNAMIC_PS = 1<<12,
- IEEE80211_HW_MFP_CAPABLE = 1<<13,
- IEEE80211_HW_WANT_MONITOR_VIF = 1<<14,
- IEEE80211_HW_NO_AUTO_VIF = 1<<15,
- IEEE80211_HW_SW_CRYPTO_CONTROL = 1<<16,
- /* free slots */
- IEEE80211_HW_REPORTS_TX_ACK_STATUS = 1<<18,
- IEEE80211_HW_CONNECTION_MONITOR = 1<<19,
- IEEE80211_HW_QUEUE_CONTROL = 1<<20,
- IEEE80211_HW_SUPPORTS_PER_STA_GTK = 1<<21,
- IEEE80211_HW_AP_LINK_PS = 1<<22,
- IEEE80211_HW_TX_AMPDU_SETUP_IN_HW = 1<<23,
- IEEE80211_HW_SUPPORTS_RC_TABLE = 1<<24,
- IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF = 1<<25,
- IEEE80211_HW_TIMING_BEACON_ONLY = 1<<26,
- IEEE80211_HW_SUPPORTS_HT_CCK_RATES = 1<<27,
- IEEE80211_HW_CHANCTX_STA_CSA = 1<<28,
- IEEE80211_HW_SUPPORTS_CLONED_SKBS = 1<<29,
- IEEE80211_SINGLE_HW_SCAN_ON_ALL_BANDS = 1<<30,
+ IEEE80211_HW_HAS_RATE_CONTROL,
+ IEEE80211_HW_RX_INCLUDES_FCS,
+ IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING,
+ IEEE80211_HW_SIGNAL_UNSPEC,
+ IEEE80211_HW_SIGNAL_DBM,
+ IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC,
+ IEEE80211_HW_SPECTRUM_MGMT,
+ IEEE80211_HW_AMPDU_AGGREGATION,
+ IEEE80211_HW_SUPPORTS_PS,
+ IEEE80211_HW_PS_NULLFUNC_STACK,
+ IEEE80211_HW_SUPPORTS_DYNAMIC_PS,
+ IEEE80211_HW_MFP_CAPABLE,
+ IEEE80211_HW_WANT_MONITOR_VIF,
+ IEEE80211_HW_NO_AUTO_VIF,
+ IEEE80211_HW_SW_CRYPTO_CONTROL,
+ IEEE80211_HW_SUPPORT_FAST_XMIT,
+ IEEE80211_HW_REPORTS_TX_ACK_STATUS,
+ IEEE80211_HW_CONNECTION_MONITOR,
+ IEEE80211_HW_QUEUE_CONTROL,
+ IEEE80211_HW_SUPPORTS_PER_STA_GTK,
+ IEEE80211_HW_AP_LINK_PS,
+ IEEE80211_HW_TX_AMPDU_SETUP_IN_HW,
+ IEEE80211_HW_SUPPORTS_RC_TABLE,
+ IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF,
+ IEEE80211_HW_TIMING_BEACON_ONLY,
+ IEEE80211_HW_SUPPORTS_HT_CCK_RATES,
+ IEEE80211_HW_CHANCTX_STA_CSA,
+ IEEE80211_HW_SUPPORTS_CLONED_SKBS,
+ IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS,
+ IEEE80211_HW_TDLS_WIDER_BW,
+ IEEE80211_HW_SUPPORTS_AMSDU_IN_AMPDU,
+ IEEE80211_HW_BEACON_TX_STATUS,
+
+ /* keep last, obviously */
+ NUM_IEEE80211_HW_FLAGS
};
/**
* it shouldn't be set.
*
* @max_tx_aggregation_subframes: maximum number of subframes in an
- * aggregate an HT driver will transmit, used by the peer as a
- * hint to size its reorder buffer.
+ * aggregate an HT driver will transmit. Though ADDBA will advertise
+ * a constant value of 64 as some older APs can crash if the window
+ * size is smaller (an example is LinkSys WRT120N with FW v1.0.07
+ * build 002 Jun 18 2012).
*
* @offchannel_tx_hw_queue: HW queue ID to use for offchannel TX
* (if %IEEE80211_HW_QUEUE_CONTROL is set)
* Use the %IEEE80211_RADIOTAP_VHT_KNOWN_* values.
*
* @netdev_features: netdev features to be set in each netdev created
- * from this HW. Note only HW checksum features are currently
- * compatible with mac80211. Other feature bits will be rejected.
+ * from this HW. Note that not all features are usable with mac80211,
+ * other features will be rejected during HW registration.
*
* @uapsd_queues: This bitmap is included in (re)association frame to indicate
* for each access category if it is uAPSD trigger-enabled and delivery-
struct wiphy *wiphy;
const char *rate_control_algorithm;
void *priv;
- u32 flags;
+ unsigned long flags[BITS_TO_LONGS(NUM_IEEE80211_HW_FLAGS)];
unsigned int extra_tx_headroom;
unsigned int extra_beacon_tailroom;
int vif_data_size;
int txq_ac_max_pending;
};
+static inline bool _ieee80211_hw_check(struct ieee80211_hw *hw,
+ enum ieee80211_hw_flags flg)
+{
+ return test_bit(flg, hw->flags);
+}
+#define ieee80211_hw_check(hw, flg) _ieee80211_hw_check(hw, IEEE80211_HW_##flg)
+
+static inline void _ieee80211_hw_set(struct ieee80211_hw *hw,
+ enum ieee80211_hw_flags flg)
+{
+ return __set_bit(flg, hw->flags);
+}
+#define ieee80211_hw_set(hw, flg) _ieee80211_hw_set(hw, IEEE80211_HW_##flg)
+
/**
* struct ieee80211_scan_request - hw scan request
*
* stack. It is always safe to pass more frames than requested,
* but this has negative impact on power consumption.
*
- * @FIF_PROMISC_IN_BSS: promiscuous mode within your BSS,
- * think of the BSS as your network segment and then this corresponds
- * to the regular ethernet device promiscuous mode.
- *
* @FIF_ALLMULTI: pass all multicast frames, this is used if requested
* by the user or if the hardware is not capable of filtering by
* multicast address.
* mac80211 needs to do and the amount of CPU wakeups, so you should
* honour this flag if possible.
*
- * @FIF_CONTROL: pass control frames (except for PS Poll), if PROMISC_IN_BSS
- * is not set then only those addressed to this station.
+ * @FIF_CONTROL: pass control frames (except for PS Poll) addressed to this
+ * station
*
* @FIF_OTHER_BSS: pass frames destined to other BSSes
*
- * @FIF_PSPOLL: pass PS Poll frames, if PROMISC_IN_BSS is not set then only
- * those addressed to this station.
+ * @FIF_PSPOLL: pass PS Poll frames
*
* @FIF_PROBE_REQ: pass probe request frames
*/
enum ieee80211_filter_flags {
- FIF_PROMISC_IN_BSS = 1<<0,
FIF_ALLMULTI = 1<<1,
FIF_FCSFAIL = 1<<2,
FIF_PLCPFAIL = 1<<3,
* See the section "Frame filtering" for more information.
* This callback must be implemented and can sleep.
*
+ * @config_iface_filter: Configure the interface's RX filter.
+ * This callback is optional and is used to configure which frames
+ * should be passed to mac80211. The filter_flags is the combination
+ * of FIF_* flags. The changed_flags is a bit mask that indicates
+ * which flags are changed.
+ * This callback can sleep.
+ *
* @set_tim: Set TIM bit. mac80211 calls this function when a TIM bit
* must be set or cleared for a given STA. Must be atomic.
*
* Returns zero if statistics are available.
* The callback can sleep.
*
- * @get_tkip_seq: If your device implements TKIP encryption in hardware this
- * callback should be provided to read the TKIP transmit IVs (both IV32
- * and IV16) for the given key from hardware.
+ * @get_key_seq: If your device implements encryption in hardware and does
+ * IV/PN assignment then this callback should be provided to read the
+ * IV/PN for the given key from hardware.
* The callback must be atomic.
*
* @set_frag_threshold: Configuration of fragmentation threshold. Assign this
* buffer size of 8. Correct ways to retransmit #1 would be:
* - TX: 1 or 18 or 81
* Even "189" would be wrong since 1 could be lost again.
+ * The @amsdu parameter is valid when the action is set to
+ * %IEEE80211_AMPDU_TX_OPERATIONAL and indicates the peer's ability
+ * to receive A-MSDU within A-MPDU.
*
* Returns a negative error code on failure.
* The callback can sleep.
* The callback can sleep.
* @event_callback: Notify driver about any event in mac80211. See
* &enum ieee80211_event_type for the different types.
- * The callback can sleep.
+ * The callback must be atomic.
*
* @release_buffered_frames: Release buffered frames according to the given
* parameters. In the case where the driver buffers some frames for
* The callback is optional and can sleep.
*
* @add_chanctx: Notifies device driver about new channel context creation.
+ * This callback may sleep.
* @remove_chanctx: Notifies device driver about channel context destruction.
+ * This callback may sleep.
* @change_chanctx: Notifies device driver about channel context changes that
* may happen when combining different virtual interfaces on the same
* channel context with different settings
+ * This callback may sleep.
* @assign_vif_chanctx: Notifies device driver about channel context being bound
* to vif. Possible use is for hw queue remapping.
+ * This callback may sleep.
* @unassign_vif_chanctx: Notifies device driver about channel context being
* unbound from vif.
+ * This callback may sleep.
* @switch_vif_chanctx: switch a number of vifs from one chanctx to
* another, as specified in the list of
* @ieee80211_vif_chanctx_switch passed to the driver, according
* to the mode defined in &ieee80211_chanctx_switch_mode.
+ * This callback may sleep.
*
* @start_ap: Start operation on the AP interface, this is called after all the
* information in bss_conf is set and beacon can be retrieved. A channel
unsigned int changed_flags,
unsigned int *total_flags,
u64 multicast);
+ void (*config_iface_filter)(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ unsigned int filter_flags,
+ unsigned int changed_flags);
int (*set_tim)(struct ieee80211_hw *hw, struct ieee80211_sta *sta,
bool set);
int (*set_key)(struct ieee80211_hw *hw, enum set_key_cmd cmd,
struct ieee80211_vif *vif);
int (*get_stats)(struct ieee80211_hw *hw,
struct ieee80211_low_level_stats *stats);
- void (*get_tkip_seq)(struct ieee80211_hw *hw, u8 hw_key_idx,
- u32 *iv32, u16 *iv16);
+ void (*get_key_seq)(struct ieee80211_hw *hw,
+ struct ieee80211_key_conf *key,
+ struct ieee80211_key_seq *seq);
int (*set_frag_threshold)(struct ieee80211_hw *hw, u32 value);
int (*set_rts_threshold)(struct ieee80211_hw *hw, u32 value);
int (*sta_add)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
struct ieee80211_vif *vif,
enum ieee80211_ampdu_mlme_action action,
struct ieee80211_sta *sta, u16 tid, u16 *ssn,
- u8 buf_size);
+ u8 buf_size, bool amsdu);
int (*get_survey)(struct ieee80211_hw *hw, int idx,
struct survey_info *survey);
void (*rfkill_poll)(struct ieee80211_hw *hw);
};
#ifdef CONFIG_MAC80211_LEDS
-char *__ieee80211_get_tx_led_name(struct ieee80211_hw *hw);
-char *__ieee80211_get_rx_led_name(struct ieee80211_hw *hw);
-char *__ieee80211_get_assoc_led_name(struct ieee80211_hw *hw);
-char *__ieee80211_get_radio_led_name(struct ieee80211_hw *hw);
-char *__ieee80211_create_tpt_led_trigger(struct ieee80211_hw *hw,
- unsigned int flags,
- const struct ieee80211_tpt_blink *blink_table,
- unsigned int blink_table_len);
+const char *__ieee80211_get_tx_led_name(struct ieee80211_hw *hw);
+const char *__ieee80211_get_rx_led_name(struct ieee80211_hw *hw);
+const char *__ieee80211_get_assoc_led_name(struct ieee80211_hw *hw);
+const char *__ieee80211_get_radio_led_name(struct ieee80211_hw *hw);
+const char *
+__ieee80211_create_tpt_led_trigger(struct ieee80211_hw *hw,
+ unsigned int flags,
+ const struct ieee80211_tpt_blink *blink_table,
+ unsigned int blink_table_len);
#endif
/**
* ieee80211_get_tx_led_name - get name of TX LED
*
* Return: The name of the LED trigger. %NULL if not configured for LEDs.
*/
-static inline char *ieee80211_get_tx_led_name(struct ieee80211_hw *hw)
+static inline const char *ieee80211_get_tx_led_name(struct ieee80211_hw *hw)
{
#ifdef CONFIG_MAC80211_LEDS
return __ieee80211_get_tx_led_name(hw);
*
* Return: The name of the LED trigger. %NULL if not configured for LEDs.
*/
-static inline char *ieee80211_get_rx_led_name(struct ieee80211_hw *hw)
+static inline const char *ieee80211_get_rx_led_name(struct ieee80211_hw *hw)
{
#ifdef CONFIG_MAC80211_LEDS
return __ieee80211_get_rx_led_name(hw);
*
* Return: The name of the LED trigger. %NULL if not configured for LEDs.
*/
-static inline char *ieee80211_get_assoc_led_name(struct ieee80211_hw *hw)
+static inline const char *ieee80211_get_assoc_led_name(struct ieee80211_hw *hw)
{
#ifdef CONFIG_MAC80211_LEDS
return __ieee80211_get_assoc_led_name(hw);
*
* Return: The name of the LED trigger. %NULL if not configured for LEDs.
*/
-static inline char *ieee80211_get_radio_led_name(struct ieee80211_hw *hw)
+static inline const char *ieee80211_get_radio_led_name(struct ieee80211_hw *hw)
{
#ifdef CONFIG_MAC80211_LEDS
return __ieee80211_get_radio_led_name(hw);
*
* Note: This function must be called before ieee80211_register_hw().
*/
-static inline char *
+static inline const char *
ieee80211_create_tpt_led_trigger(struct ieee80211_hw *hw, unsigned int flags,
const struct ieee80211_tpt_blink *blink_table,
unsigned int blink_table_len)
void ieee80211_restart_hw(struct ieee80211_hw *hw);
/**
- * ieee80211_napi_add - initialize mac80211 NAPI context
- * @hw: the hardware to initialize the NAPI context on
- * @napi: the NAPI context to initialize
- * @napi_dev: dummy NAPI netdevice, here to not waste the space if the
- * driver doesn't use NAPI
- * @poll: poll function
- * @weight: default weight
+ * ieee80211_rx_napi - receive frame from NAPI context
+ *
+ * Use this function to hand received frames to mac80211. The receive
+ * buffer in @skb must start with an IEEE 802.11 header. In case of a
+ * paged @skb is used, the driver is recommended to put the ieee80211
+ * header of the frame on the linear part of the @skb to avoid memory
+ * allocation and/or memcpy by the stack.
+ *
+ * This function may not be called in IRQ context. Calls to this function
+ * for a single hardware must be synchronized against each other. Calls to
+ * this function, ieee80211_rx_ni() and ieee80211_rx_irqsafe() may not be
+ * mixed for a single hardware. Must not run concurrently with
+ * ieee80211_tx_status() or ieee80211_tx_status_ni().
+ *
+ * This function must be called with BHs disabled.
*
- * See also netif_napi_add().
+ * @hw: the hardware this frame came in on
+ * @skb: the buffer to receive, owned by mac80211 after this call
+ * @napi: the NAPI context
*/
-void ieee80211_napi_add(struct ieee80211_hw *hw, struct napi_struct *napi,
- struct net_device *napi_dev,
- int (*poll)(struct napi_struct *, int),
- int weight);
+void ieee80211_rx_napi(struct ieee80211_hw *hw, struct sk_buff *skb,
+ struct napi_struct *napi);
/**
* ieee80211_rx - receive frame
* @hw: the hardware this frame came in on
* @skb: the buffer to receive, owned by mac80211 after this call
*/
-void ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb);
+static inline void ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb)
+{
+ ieee80211_rx_napi(hw, skb, NULL);
+}
/**
* ieee80211_rx_irqsafe - receive frame
void ieee80211_get_tkip_p2k(struct ieee80211_key_conf *keyconf,
struct sk_buff *skb, u8 *p2k);
-/**
- * ieee80211_aes_cmac_calculate_k1_k2 - calculate the AES-CMAC sub keys
- *
- * This function computes the two AES-CMAC sub-keys, based on the
- * previously installed master key.
- *
- * @keyconf: the parameter passed with the set key
- * @k1: a buffer to be filled with the 1st sub-key
- * @k2: a buffer to be filled with the 2nd sub-key
- */
-void ieee80211_aes_cmac_calculate_k1_k2(struct ieee80211_key_conf *keyconf,
- u8 *k1, u8 *k2);
-
-/**
- * struct ieee80211_key_seq - key sequence counter
- *
- * @tkip: TKIP data, containing IV32 and IV16 in host byte order
- * @ccmp: PN data, most significant byte first (big endian,
- * reverse order than in packet)
- * @aes_cmac: PN data, most significant byte first (big endian,
- * reverse order than in packet)
- * @aes_gmac: PN data, most significant byte first (big endian,
- * reverse order than in packet)
- * @gcmp: PN data, most significant byte first (big endian,
- * reverse order than in packet)
- */
-struct ieee80211_key_seq {
- union {
- struct {
- u32 iv32;
- u16 iv16;
- } tkip;
- struct {
- u8 pn[6];
- } ccmp;
- struct {
- u8 pn[6];
- } aes_cmac;
- struct {
- u8 pn[6];
- } aes_gmac;
- struct {
- u8 pn[6];
- } gcmp;
- };
-};
-
/**
* ieee80211_get_key_tx_seq - get key TX sequence counter
*
Code Review / kvmfornfv.git / blobdiff