CHIP_INVALID = 0,
CHIP_PM800,
CHIP_PM805,
+ CHIP_PM860,
CHIP_MAX,
};
/* page 0 basic: slave adder 0x60 */
#define PM800_STATUS_1 (0x01)
-#define PM800_ONKEY_STS1 (1 << 0)
-#define PM800_EXTON_STS1 (1 << 1)
-#define PM800_CHG_STS1 (1 << 2)
-#define PM800_BAT_STS1 (1 << 3)
-#define PM800_VBUS_STS1 (1 << 4)
-#define PM800_LDO_PGOOD_STS1 (1 << 5)
-#define PM800_BUCK_PGOOD_STS1 (1 << 6)
+#define PM800_ONKEY_STS1 BIT(0)
+#define PM800_EXTON_STS1 BIT(1)
+#define PM800_CHG_STS1 BIT(2)
+#define PM800_BAT_STS1 BIT(3)
+#define PM800_VBUS_STS1 BIT(4)
+#define PM800_LDO_PGOOD_STS1 BIT(5)
+#define PM800_BUCK_PGOOD_STS1 BIT(6)
#define PM800_STATUS_2 (0x02)
-#define PM800_RTC_ALARM_STS2 (1 << 0)
+#define PM800_RTC_ALARM_STS2 BIT(0)
/* Wakeup Registers */
-#define PM800_WAKEUP1 (0x0D)
+#define PM800_WAKEUP1 (0x0D)
-#define PM800_WAKEUP2 (0x0E)
-#define PM800_WAKEUP2_INV_INT (1 << 0)
-#define PM800_WAKEUP2_INT_CLEAR (1 << 1)
-#define PM800_WAKEUP2_INT_MASK (1 << 2)
+#define PM800_WAKEUP2 (0x0E)
+#define PM800_WAKEUP2_INV_INT BIT(0)
+#define PM800_WAKEUP2_INT_CLEAR BIT(1)
+#define PM800_WAKEUP2_INT_MASK BIT(2)
-#define PM800_POWER_UP_LOG (0x10)
+#define PM800_POWER_UP_LOG (0x10)
/* Referance and low power registers */
#define PM800_LOW_POWER1 (0x20)
#define PM800_LOW_POWER2 (0x21)
-#define PM800_LOW_POWER_CONFIG3 (0x22)
-#define PM800_LOW_POWER_CONFIG4 (0x23)
+#define PM800_LOW_POWER_CONFIG3 (0x22)
+#define PM800_LOW_POWER_CONFIG4 (0x23)
/* GPIO register */
#define PM800_GPIO_0_1_CNTRL (0x30)
-#define PM800_GPIO0_VAL (1 << 0)
+#define PM800_GPIO0_VAL BIT(0)
#define PM800_GPIO0_GPIO_MODE(x) (x << 1)
-#define PM800_GPIO1_VAL (1 << 4)
+#define PM800_GPIO1_VAL BIT(4)
#define PM800_GPIO1_GPIO_MODE(x) (x << 5)
#define PM800_GPIO_2_3_CNTRL (0x31)
-#define PM800_GPIO2_VAL (1 << 0)
+#define PM800_GPIO2_VAL BIT(0)
#define PM800_GPIO2_GPIO_MODE(x) (x << 1)
-#define PM800_GPIO3_VAL (1 << 4)
+#define PM800_GPIO3_VAL BIT(4)
#define PM800_GPIO3_GPIO_MODE(x) (x << 5)
#define PM800_GPIO3_MODE_MASK 0x1F
#define PM800_GPIO3_HEADSET_MODE PM800_GPIO3_GPIO_MODE(6)
-#define PM800_GPIO_4_CNTRL (0x32)
-#define PM800_GPIO4_VAL (1 << 0)
+#define PM800_GPIO_4_CNTRL (0x32)
+#define PM800_GPIO4_VAL BIT(0)
#define PM800_GPIO4_GPIO_MODE(x) (x << 1)
#define PM800_HEADSET_CNTRL (0x38)
-#define PM800_HEADSET_DET_EN (1 << 7)
-#define PM800_HSDET_SLP (1 << 1)
+#define PM800_HEADSET_DET_EN BIT(7)
+#define PM800_HSDET_SLP BIT(1)
/* PWM register */
-#define PM800_PWM1 (0x40)
-#define PM800_PWM2 (0x41)
-#define PM800_PWM3 (0x42)
-#define PM800_PWM4 (0x43)
+#define PM800_PWM1 (0x40)
+#define PM800_PWM2 (0x41)
+#define PM800_PWM3 (0x42)
+#define PM800_PWM4 (0x43)
/* RTC Registers */
#define PM800_RTC_CONTROL (0xD0)
#define PM800_RTC_MISC4 (0xE4)
#define PM800_RTC_MISC5 (0xE7)
/* bit definitions of RTC Register 1 (0xD0) */
-#define PM800_ALARM1_EN (1 << 0)
-#define PM800_ALARM_WAKEUP (1 << 4)
-#define PM800_ALARM (1 << 5)
-#define PM800_RTC1_USE_XO (1 << 7)
+#define PM800_ALARM1_EN BIT(0)
+#define PM800_ALARM_WAKEUP BIT(4)
+#define PM800_ALARM BIT(5)
+#define PM800_RTC1_USE_XO BIT(7)
/* Regulator Control Registers: BUCK1,BUCK5,LDO1 have DVC */
/* buck registers */
-#define PM800_SLEEP_BUCK1 (0x30)
+#define PM800_SLEEP_BUCK1 (0x30)
/* BUCK Sleep Mode Register 1: BUCK[1..4] */
-#define PM800_BUCK_SLP1 (0x5A)
-#define PM800_BUCK1_SLP1_SHIFT 0
-#define PM800_BUCK1_SLP1_MASK (0x3 << PM800_BUCK1_SLP1_SHIFT)
+#define PM800_BUCK_SLP1 (0x5A)
+#define PM800_BUCK1_SLP1_SHIFT 0
+#define PM800_BUCK1_SLP1_MASK (0x3 << PM800_BUCK1_SLP1_SHIFT)
/* page 2 GPADC: slave adder 0x02 */
#define PM800_GPADC_MEAS_EN1 (0x01)
-#define PM800_MEAS_EN1_VBAT (1 << 2)
+#define PM800_MEAS_EN1_VBAT BIT(2)
#define PM800_GPADC_MEAS_EN2 (0x02)
-#define PM800_MEAS_EN2_RFTMP (1 << 0)
-#define PM800_MEAS_GP0_EN (1 << 2)
-#define PM800_MEAS_GP1_EN (1 << 3)
-#define PM800_MEAS_GP2_EN (1 << 4)
-#define PM800_MEAS_GP3_EN (1 << 5)
-#define PM800_MEAS_GP4_EN (1 << 6)
+#define PM800_MEAS_EN2_RFTMP BIT(0)
+#define PM800_MEAS_GP0_EN BIT(2)
+#define PM800_MEAS_GP1_EN BIT(3)
+#define PM800_MEAS_GP2_EN BIT(4)
+#define PM800_MEAS_GP3_EN BIT(5)
+#define PM800_MEAS_GP4_EN BIT(6)
#define PM800_GPADC_MISC_CONFIG1 (0x05)
#define PM800_GPADC_MISC_CONFIG2 (0x06)
-#define PM800_GPADC_MISC_GPFSM_EN (1 << 0)
+#define PM800_GPADC_MISC_GPFSM_EN BIT(0)
#define PM800_GPADC_SLOW_MODE(x) (x << 3)
-#define PM800_GPADC_MISC_CONFIG3 (0x09)
-#define PM800_GPADC_MISC_CONFIG4 (0x0A)
+#define PM800_GPADC_MISC_CONFIG3 (0x09)
+#define PM800_GPADC_MISC_CONFIG4 (0x0A)
-#define PM800_GPADC_PREBIAS1 (0x0F)
+#define PM800_GPADC_PREBIAS1 (0x0F)
#define PM800_GPADC0_GP_PREBIAS_TIME(x) (x << 0)
-#define PM800_GPADC_PREBIAS2 (0x10)
+#define PM800_GPADC_PREBIAS2 (0x10)
-#define PM800_GP_BIAS_ENA1 (0x14)
-#define PM800_GPADC_GP_BIAS_EN0 (1 << 0)
-#define PM800_GPADC_GP_BIAS_EN1 (1 << 1)
-#define PM800_GPADC_GP_BIAS_EN2 (1 << 2)
-#define PM800_GPADC_GP_BIAS_EN3 (1 << 3)
+#define PM800_GP_BIAS_ENA1 (0x14)
+#define PM800_GPADC_GP_BIAS_EN0 BIT(0)
+#define PM800_GPADC_GP_BIAS_EN1 BIT(1)
+#define PM800_GPADC_GP_BIAS_EN2 BIT(2)
+#define PM800_GPADC_GP_BIAS_EN3 BIT(3)
#define PM800_GP_BIAS_OUT1 (0x15)
-#define PM800_BIAS_OUT_GP0 (1 << 0)
-#define PM800_BIAS_OUT_GP1 (1 << 1)
-#define PM800_BIAS_OUT_GP2 (1 << 2)
-#define PM800_BIAS_OUT_GP3 (1 << 3)
+#define PM800_BIAS_OUT_GP0 BIT(0)
+#define PM800_BIAS_OUT_GP1 BIT(1)
+#define PM800_BIAS_OUT_GP2 BIT(2)
+#define PM800_BIAS_OUT_GP3 BIT(3)
#define PM800_GPADC0_LOW_TH 0x20
#define PM800_GPADC1_LOW_TH 0x21
#define PM805_INT_STATUS1 (0x03)
-#define PM805_INT1_HP1_SHRT (1 << 0)
-#define PM805_INT1_HP2_SHRT (1 << 1)
-#define PM805_INT1_MIC_CONFLICT (1 << 2)
-#define PM805_INT1_CLIP_FAULT (1 << 3)
-#define PM805_INT1_LDO_OFF (1 << 4)
-#define PM805_INT1_SRC_DPLL_LOCK (1 << 5)
+#define PM805_INT1_HP1_SHRT BIT(0)
+#define PM805_INT1_HP2_SHRT BIT(1)
+#define PM805_INT1_MIC_CONFLICT BIT(2)
+#define PM805_INT1_CLIP_FAULT BIT(3)
+#define PM805_INT1_LDO_OFF BIT(4)
+#define PM805_INT1_SRC_DPLL_LOCK BIT(5)
#define PM805_INT_STATUS2 (0x04)
-#define PM805_INT2_MIC_DET (1 << 0)
-#define PM805_INT2_SHRT_BTN_DET (1 << 1)
-#define PM805_INT2_VOLM_BTN_DET (1 << 2)
-#define PM805_INT2_VOLP_BTN_DET (1 << 3)
-#define PM805_INT2_RAW_PLL_FAULT (1 << 4)
-#define PM805_INT2_FINE_PLL_FAULT (1 << 5)
+#define PM805_INT2_MIC_DET BIT(0)
+#define PM805_INT2_SHRT_BTN_DET BIT(1)
+#define PM805_INT2_VOLM_BTN_DET BIT(2)
+#define PM805_INT2_VOLP_BTN_DET BIT(3)
+#define PM805_INT2_RAW_PLL_FAULT BIT(4)
+#define PM805_INT2_FINE_PLL_FAULT BIT(5)
#define PM805_INT_MASK1 (0x05)
#define PM805_INT_MASK2 (0x06)
-#define PM805_SHRT_BTN_DET (1 << 1)
+#define PM805_SHRT_BTN_DET BIT(1)
/* number of status and int reg in a row */
#define PM805_INT_REG_NUM (2)
#define PM805_MIC_DET1 (0x07)
-#define PM805_MIC_DET_EN_MIC_DET (1 << 0)
+#define PM805_MIC_DET_EN_MIC_DET BIT(0)
#define PM805_MIC_DET2 (0x08)
-#define PM805_MIC_DET_STATUS1 (0x09)
+#define PM805_MIC_DET_STATUS1 (0x09)
-#define PM805_MIC_DET_STATUS3 (0x0A)
-#define PM805_AUTO_SEQ_STATUS1 (0x0B)
-#define PM805_AUTO_SEQ_STATUS2 (0x0C)
+#define PM805_MIC_DET_STATUS3 (0x0A)
+#define PM805_AUTO_SEQ_STATUS1 (0x0B)
+#define PM805_AUTO_SEQ_STATUS2 (0x0C)
#define PM805_ADC_SETTING1 (0x10)
#define PM805_ADC_SETTING2 (0x11)
#define PM805_ADC_GAIN2 (0x13)
#define PM805_DMIC_SETTING (0x15)
#define PM805_DWS_SETTING (0x16)
-#define PM805_MIC_CONFLICT_STS (0x17)
+#define PM805_MIC_CONFLICT_STS (0x17)
#define PM805_PDM_SETTING1 (0x20)
#define PM805_PDM_SETTING2 (0x21)
#define PM805_PDM_CONTROL2 (0x24)
#define PM805_PDM_CONTROL3 (0x25)
-#define PM805_HEADPHONE_SETTING (0x26)
-#define PM805_HEADPHONE_GAIN_A2A (0x27)
-#define PM805_HEADPHONE_SHORT_STATE (0x28)
-#define PM805_EARPHONE_SETTING (0x29)
-#define PM805_AUTO_SEQ_SETTING (0x2A)
+#define PM805_HEADPHONE_SETTING (0x26)
+#define PM805_HEADPHONE_GAIN_A2A (0x27)
+#define PM805_HEADPHONE_SHORT_STATE (0x28)
+#define PM805_EARPHONE_SETTING (0x29)
+#define PM805_AUTO_SEQ_SETTING (0x2A)
struct pm80x_rtc_pdata {
int vrtc;
Code Review / kvmfornfv.git / blobdiff