extern struct kset *bus_get_kset(struct bus_type *bus);
extern struct klist *bus_get_device_klist(struct bus_type *bus);
+/**
+ * enum probe_type - device driver probe type to try
+ * Device drivers may opt in for special handling of their
+ * respective probe routines. This tells the core what to
+ * expect and prefer.
+ *
+ * @PROBE_DEFAULT_STRATEGY: Used by drivers that work equally well
+ * whether probed synchronously or asynchronously.
+ * @PROBE_PREFER_ASYNCHRONOUS: Drivers for "slow" devices which
+ * probing order is not essential for booting the system may
+ * opt into executing their probes asynchronously.
+ * @PROBE_FORCE_SYNCHRONOUS: Use this to annotate drivers that need
+ * their probe routines to run synchronously with driver and
+ * device registration (with the exception of -EPROBE_DEFER
+ * handling - re-probing always ends up being done asynchronously).
+ *
+ * Note that the end goal is to switch the kernel to use asynchronous
+ * probing by default, so annotating drivers with
+ * %PROBE_PREFER_ASYNCHRONOUS is a temporary measure that allows us
+ * to speed up boot process while we are validating the rest of the
+ * drivers.
+ */
+enum probe_type {
+ PROBE_DEFAULT_STRATEGY,
+ PROBE_PREFER_ASYNCHRONOUS,
+ PROBE_FORCE_SYNCHRONOUS,
+};
+
/**
* struct device_driver - The basic device driver structure
* @name: Name of the device driver.
* @owner: The module owner.
* @mod_name: Used for built-in modules.
* @suppress_bind_attrs: Disables bind/unbind via sysfs.
+ * @probe_type: Type of the probe (synchronous or asynchronous) to use.
* @of_match_table: The open firmware table.
* @acpi_match_table: The ACPI match table.
* @probe: Called to query the existence of a specific device,
const char *mod_name; /* used for built-in modules */
bool suppress_bind_attrs; /* disables bind/unbind via sysfs */
+ enum probe_type probe_type;
const struct of_device_id *of_match_table;
const struct acpi_device_id *acpi_match_table;
struct bus_type *subsys;
struct list_head node;
int (*add_dev)(struct device *dev, struct subsys_interface *sif);
- int (*remove_dev)(struct device *dev, struct subsys_interface *sif);
+ void (*remove_dev)(struct device *dev, struct subsys_interface *sif);
};
int subsys_interface_register(struct subsys_interface *sif);
typedef int (*dr_match_t)(struct device *dev, void *res, void *match_data);
#ifdef CONFIG_DEBUG_DEVRES
-extern void *__devres_alloc(dr_release_t release, size_t size, gfp_t gfp,
- const char *name);
+extern void *__devres_alloc_node(dr_release_t release, size_t size, gfp_t gfp,
+ int nid, const char *name);
#define devres_alloc(release, size, gfp) \
- __devres_alloc(release, size, gfp, #release)
+ __devres_alloc_node(release, size, gfp, NUMA_NO_NODE, #release)
+#define devres_alloc_node(release, size, gfp, nid) \
+ __devres_alloc_node(release, size, gfp, nid, #release)
#else
-extern void *devres_alloc(dr_release_t release, size_t size, gfp_t gfp);
+extern void *devres_alloc_node(dr_release_t release, size_t size, gfp_t gfp,
+ int nid);
+static inline void *devres_alloc(dr_release_t release, size_t size, gfp_t gfp)
+{
+ return devres_alloc_node(release, size, gfp, NUMA_NO_NODE);
+}
#endif
+
extern void devres_for_each_res(struct device *dev, dr_release_t release,
dr_match_t match, void *match_data,
void (*fn)(struct device *, void *, void *),
/* managed devm_k.alloc/kfree for device drivers */
extern void *devm_kmalloc(struct device *dev, size_t size, gfp_t gfp);
-extern char *devm_kvasprintf(struct device *dev, gfp_t gfp, const char *fmt,
- va_list ap);
+extern __printf(3, 0)
+char *devm_kvasprintf(struct device *dev, gfp_t gfp, const char *fmt,
+ va_list ap);
extern __printf(3, 4)
char *devm_kasprintf(struct device *dev, gfp_t gfp, const char *fmt, ...);
static inline void *devm_kzalloc(struct device *dev, size_t size, gfp_t gfp)
* along with subsystem-level and driver-level callbacks.
* @pins: For device pin management.
* See Documentation/pinctrl.txt for details.
+ * @msi_list: Hosts MSI descriptors
+ * @msi_domain: The generic MSI domain this device is using.
* @numa_node: NUMA node this device is close to.
* @dma_mask: Dma mask (if dma'ble device).
* @coherent_dma_mask: Like dma_mask, but for alloc_coherent mapping as not all
struct dev_pm_info power;
struct dev_pm_domain *pm_domain;
+#ifdef CONFIG_GENERIC_MSI_IRQ_DOMAIN
+ struct irq_domain *msi_domain;
+#endif
#ifdef CONFIG_PINCTRL
struct dev_pin_info *pins;
#endif
+#ifdef CONFIG_GENERIC_MSI_IRQ
+ struct list_head msi_list;
+#endif
#ifdef CONFIG_NUMA
int numa_node; /* NUMA node this device is close to */
}
#endif
+static inline struct irq_domain *dev_get_msi_domain(const struct device *dev)
+{
+#ifdef CONFIG_GENERIC_MSI_IRQ_DOMAIN
+ return dev->msi_domain;
+#else
+ return NULL;
+#endif
+}
+
+static inline void dev_set_msi_domain(struct device *dev, struct irq_domain *d)
+{
+#ifdef CONFIG_GENERIC_MSI_IRQ_DOMAIN
+ dev->msi_domain = d;
+#endif
+}
+
static inline void *dev_get_drvdata(const struct device *dev)
{
return dev->driver_data;
extern void device_del(struct device *dev);
extern int device_for_each_child(struct device *dev, void *data,
int (*fn)(struct device *dev, void *data));
+extern int device_for_each_child_reverse(struct device *dev, void *data,
+ int (*fn)(struct device *dev, void *data));
extern struct device *device_find_child(struct device *dev, void *data,
int (*match)(struct device *dev, void *data));
extern int device_rename(struct device *dev, const char *new_name);
extern void device_release_driver(struct device *dev);
extern int __must_check device_attach(struct device *dev);
extern int __must_check driver_attach(struct device_driver *drv);
+extern void device_initial_probe(struct device *dev);
extern int __must_check device_reprobe(struct device *dev);
/*
* Easy functions for dynamically creating devices on the fly
*/
-extern struct device *device_create_vargs(struct class *cls,
- struct device *parent,
- dev_t devt,
- void *drvdata,
- const char *fmt,
- va_list vargs);
+extern __printf(5, 0)
+struct device *device_create_vargs(struct class *cls, struct device *parent,
+ dev_t devt, void *drvdata,
+ const char *fmt, va_list vargs);
extern __printf(5, 6)
struct device *device_create(struct class *cls, struct device *parent,
dev_t devt, void *drvdata,
} \
module_exit(__driver##_exit);
+/**
+ * builtin_driver() - Helper macro for drivers that don't do anything
+ * special in init and have no exit. This eliminates some boilerplate.
+ * Each driver may only use this macro once, and calling it replaces
+ * device_initcall (or in some cases, the legacy __initcall). This is
+ * meant to be a direct parallel of module_driver() above but without
+ * the __exit stuff that is not used for builtin cases.
+ *
+ * @__driver: driver name
+ * @__register: register function for this driver type
+ * @...: Additional arguments to be passed to __register
+ *
+ * Use this macro to construct bus specific macros for registering
+ * drivers, and do not use it on its own.
+ */
+#define builtin_driver(__driver, __register, ...) \
+static int __init __driver##_init(void) \
+{ \
+ return __register(&(__driver) , ##__VA_ARGS__); \
+} \
+device_initcall(__driver##_init);
+
#endif /* _DEVICE_H_ */
Code Review / kvmfornfv.git / blobdiff