--- /dev/null
+/*
+ * Copyright 1998-2008 VIA Technologies, Inc. All Rights Reserved.
+ * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
+
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License as published by the Free Software Foundation;
+ * either version 2, or (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
+ * the implied warranty of MERCHANTABILITY or FITNESS FOR
+ * A PARTICULAR PURPOSE.See the GNU General Public License
+ * for more details.
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+#include <linux/via-core.h>
+#include "global.h"
+
+/*
+ * Figure out an appropriate bytes-per-pixel setting.
+ */
+static int viafb_set_bpp(void __iomem *engine, u8 bpp)
+{
+ u32 gemode;
+
+ /* Preserve the reserved bits */
+ /* Lowest 2 bits to zero gives us no rotation */
+ gemode = readl(engine + VIA_REG_GEMODE) & 0xfffffcfc;
+ switch (bpp) {
+ case 8:
+ gemode |= VIA_GEM_8bpp;
+ break;
+ case 16:
+ gemode |= VIA_GEM_16bpp;
+ break;
+ case 32:
+ gemode |= VIA_GEM_32bpp;
+ break;
+ default:
+ printk(KERN_WARNING "viafb_set_bpp: Unsupported bpp %d\n", bpp);
+ return -EINVAL;
+ }
+ writel(gemode, engine + VIA_REG_GEMODE);
+ return 0;
+}
+
+
+static int hw_bitblt_1(void __iomem *engine, u8 op, u32 width, u32 height,
+ u8 dst_bpp, u32 dst_addr, u32 dst_pitch, u32 dst_x, u32 dst_y,
+ u32 *src_mem, u32 src_addr, u32 src_pitch, u32 src_x, u32 src_y,
+ u32 fg_color, u32 bg_color, u8 fill_rop)
+{
+ u32 ge_cmd = 0, tmp, i;
+ int ret;
+
+ if (!op || op > 3) {
+ printk(KERN_WARNING "hw_bitblt_1: Invalid operation: %d\n", op);
+ return -EINVAL;
+ }
+
+ if (op != VIA_BITBLT_FILL && !src_mem && src_addr == dst_addr) {
+ if (src_x < dst_x) {
+ ge_cmd |= 0x00008000;
+ src_x += width - 1;
+ dst_x += width - 1;
+ }
+ if (src_y < dst_y) {
+ ge_cmd |= 0x00004000;
+ src_y += height - 1;
+ dst_y += height - 1;
+ }
+ }
+
+ if (op == VIA_BITBLT_FILL) {
+ switch (fill_rop) {
+ case 0x00: /* blackness */
+ case 0x5A: /* pattern inversion */
+ case 0xF0: /* pattern copy */
+ case 0xFF: /* whiteness */
+ break;
+ default:
+ printk(KERN_WARNING "hw_bitblt_1: Invalid fill rop: "
+ "%u\n", fill_rop);
+ return -EINVAL;
+ }
+ }
+
+ ret = viafb_set_bpp(engine, dst_bpp);
+ if (ret)
+ return ret;
+
+ if (op != VIA_BITBLT_FILL) {
+ if (src_x & (op == VIA_BITBLT_MONO ? 0xFFFF8000 : 0xFFFFF000)
+ || src_y & 0xFFFFF000) {
+ printk(KERN_WARNING "hw_bitblt_1: Unsupported source "
+ "x/y %d %d\n", src_x, src_y);
+ return -EINVAL;
+ }
+ tmp = src_x | (src_y << 16);
+ writel(tmp, engine + 0x08);
+ }
+
+ if (dst_x & 0xFFFFF000 || dst_y & 0xFFFFF000) {
+ printk(KERN_WARNING "hw_bitblt_1: Unsupported destination x/y "
+ "%d %d\n", dst_x, dst_y);
+ return -EINVAL;
+ }
+ tmp = dst_x | (dst_y << 16);
+ writel(tmp, engine + 0x0C);
+
+ if ((width - 1) & 0xFFFFF000 || (height - 1) & 0xFFFFF000) {
+ printk(KERN_WARNING "hw_bitblt_1: Unsupported width/height "
+ "%d %d\n", width, height);
+ return -EINVAL;
+ }
+ tmp = (width - 1) | ((height - 1) << 16);
+ writel(tmp, engine + 0x10);
+
+ if (op != VIA_BITBLT_COLOR)
+ writel(fg_color, engine + 0x18);
+
+ if (op == VIA_BITBLT_MONO)
+ writel(bg_color, engine + 0x1C);
+
+ if (op != VIA_BITBLT_FILL) {
+ tmp = src_mem ? 0 : src_addr;
+ if (dst_addr & 0xE0000007) {
+ printk(KERN_WARNING "hw_bitblt_1: Unsupported source "
+ "address %X\n", tmp);
+ return -EINVAL;
+ }
+ tmp >>= 3;
+ writel(tmp, engine + 0x30);
+ }
+
+ if (dst_addr & 0xE0000007) {
+ printk(KERN_WARNING "hw_bitblt_1: Unsupported destination "
+ "address %X\n", dst_addr);
+ return -EINVAL;
+ }
+ tmp = dst_addr >> 3;
+ writel(tmp, engine + 0x34);
+
+ if (op == VIA_BITBLT_FILL)
+ tmp = 0;
+ else
+ tmp = src_pitch;
+ if (tmp & 0xFFFFC007 || dst_pitch & 0xFFFFC007) {
+ printk(KERN_WARNING "hw_bitblt_1: Unsupported pitch %X %X\n",
+ tmp, dst_pitch);
+ return -EINVAL;
+ }
+ tmp = VIA_PITCH_ENABLE | (tmp >> 3) | (dst_pitch << (16 - 3));
+ writel(tmp, engine + 0x38);
+
+ if (op == VIA_BITBLT_FILL)
+ ge_cmd |= fill_rop << 24 | 0x00002000 | 0x00000001;
+ else {
+ ge_cmd |= 0xCC000000; /* ROP=SRCCOPY */
+ if (src_mem)
+ ge_cmd |= 0x00000040;
+ if (op == VIA_BITBLT_MONO)
+ ge_cmd |= 0x00000002 | 0x00000100 | 0x00020000;
+ else
+ ge_cmd |= 0x00000001;
+ }
+ writel(ge_cmd, engine);
+
+ if (op == VIA_BITBLT_FILL || !src_mem)
+ return 0;
+
+ tmp = (width * height * (op == VIA_BITBLT_MONO ? 1 : (dst_bpp >> 3)) +
+ 3) >> 2;
+
+ for (i = 0; i < tmp; i++)
+ writel(src_mem[i], engine + VIA_MMIO_BLTBASE);
+
+ return 0;
+}
+
+static int hw_bitblt_2(void __iomem *engine, u8 op, u32 width, u32 height,
+ u8 dst_bpp, u32 dst_addr, u32 dst_pitch, u32 dst_x, u32 dst_y,
+ u32 *src_mem, u32 src_addr, u32 src_pitch, u32 src_x, u32 src_y,
+ u32 fg_color, u32 bg_color, u8 fill_rop)
+{
+ u32 ge_cmd = 0, tmp, i;
+ int ret;
+
+ if (!op || op > 3) {
+ printk(KERN_WARNING "hw_bitblt_2: Invalid operation: %d\n", op);
+ return -EINVAL;
+ }
+
+ if (op != VIA_BITBLT_FILL && !src_mem && src_addr == dst_addr) {
+ if (src_x < dst_x) {
+ ge_cmd |= 0x00008000;
+ src_x += width - 1;
+ dst_x += width - 1;
+ }
+ if (src_y < dst_y) {
+ ge_cmd |= 0x00004000;
+ src_y += height - 1;
+ dst_y += height - 1;
+ }
+ }
+
+ if (op == VIA_BITBLT_FILL) {
+ switch (fill_rop) {
+ case 0x00: /* blackness */
+ case 0x5A: /* pattern inversion */
+ case 0xF0: /* pattern copy */
+ case 0xFF: /* whiteness */
+ break;
+ default:
+ printk(KERN_WARNING "hw_bitblt_2: Invalid fill rop: "
+ "%u\n", fill_rop);
+ return -EINVAL;
+ }
+ }
+
+ ret = viafb_set_bpp(engine, dst_bpp);
+ if (ret)
+ return ret;
+
+ if (op == VIA_BITBLT_FILL)
+ tmp = 0;
+ else
+ tmp = src_pitch;
+ if (tmp & 0xFFFFC007 || dst_pitch & 0xFFFFC007) {
+ printk(KERN_WARNING "hw_bitblt_2: Unsupported pitch %X %X\n",
+ tmp, dst_pitch);
+ return -EINVAL;
+ }
+ tmp = (tmp >> 3) | (dst_pitch << (16 - 3));
+ writel(tmp, engine + 0x08);
+
+ if ((width - 1) & 0xFFFFF000 || (height - 1) & 0xFFFFF000) {
+ printk(KERN_WARNING "hw_bitblt_2: Unsupported width/height "
+ "%d %d\n", width, height);
+ return -EINVAL;
+ }
+ tmp = (width - 1) | ((height - 1) << 16);
+ writel(tmp, engine + 0x0C);
+
+ if (dst_x & 0xFFFFF000 || dst_y & 0xFFFFF000) {
+ printk(KERN_WARNING "hw_bitblt_2: Unsupported destination x/y "
+ "%d %d\n", dst_x, dst_y);
+ return -EINVAL;
+ }
+ tmp = dst_x | (dst_y << 16);
+ writel(tmp, engine + 0x10);
+
+ if (dst_addr & 0xE0000007) {
+ printk(KERN_WARNING "hw_bitblt_2: Unsupported destination "
+ "address %X\n", dst_addr);
+ return -EINVAL;
+ }
+ tmp = dst_addr >> 3;
+ writel(tmp, engine + 0x14);
+
+ if (op != VIA_BITBLT_FILL) {
+ if (src_x & (op == VIA_BITBLT_MONO ? 0xFFFF8000 : 0xFFFFF000)
+ || src_y & 0xFFFFF000) {
+ printk(KERN_WARNING "hw_bitblt_2: Unsupported source "
+ "x/y %d %d\n", src_x, src_y);
+ return -EINVAL;
+ }
+ tmp = src_x | (src_y << 16);
+ writel(tmp, engine + 0x18);
+
+ tmp = src_mem ? 0 : src_addr;
+ if (dst_addr & 0xE0000007) {
+ printk(KERN_WARNING "hw_bitblt_2: Unsupported source "
+ "address %X\n", tmp);
+ return -EINVAL;
+ }
+ tmp >>= 3;
+ writel(tmp, engine + 0x1C);
+ }
+
+ if (op == VIA_BITBLT_FILL) {
+ writel(fg_color, engine + 0x58);
+ } else if (op == VIA_BITBLT_MONO) {
+ writel(fg_color, engine + 0x4C);
+ writel(bg_color, engine + 0x50);
+ }
+
+ if (op == VIA_BITBLT_FILL)
+ ge_cmd |= fill_rop << 24 | 0x00002000 | 0x00000001;
+ else {
+ ge_cmd |= 0xCC000000; /* ROP=SRCCOPY */
+ if (src_mem)
+ ge_cmd |= 0x00000040;
+ if (op == VIA_BITBLT_MONO)
+ ge_cmd |= 0x00000002 | 0x00000100 | 0x00020000;
+ else
+ ge_cmd |= 0x00000001;
+ }
+ writel(ge_cmd, engine);
+
+ if (op == VIA_BITBLT_FILL || !src_mem)
+ return 0;
+
+ tmp = (width * height * (op == VIA_BITBLT_MONO ? 1 : (dst_bpp >> 3)) +
+ 3) >> 2;
+
+ for (i = 0; i < tmp; i++)
+ writel(src_mem[i], engine + VIA_MMIO_BLTBASE);
+
+ return 0;
+}
+
+int viafb_setup_engine(struct fb_info *info)
+{
+ struct viafb_par *viapar = info->par;
+ void __iomem *engine;
+ u32 chip_name = viapar->shared->chip_info.gfx_chip_name;
+
+ engine = viapar->shared->vdev->engine_mmio;
+ if (!engine) {
+ printk(KERN_WARNING "viafb_init_accel: ioremap failed, "
+ "hardware acceleration disabled\n");
+ return -ENOMEM;
+ }
+
+ switch (chip_name) {
+ case UNICHROME_CLE266:
+ case UNICHROME_K400:
+ case UNICHROME_K800:
+ case UNICHROME_PM800:
+ case UNICHROME_CN700:
+ case UNICHROME_CX700:
+ case UNICHROME_CN750:
+ case UNICHROME_K8M890:
+ case UNICHROME_P4M890:
+ case UNICHROME_P4M900:
+ viapar->shared->hw_bitblt = hw_bitblt_1;
+ break;
+ case UNICHROME_VX800:
+ case UNICHROME_VX855:
+ case UNICHROME_VX900:
+ viapar->shared->hw_bitblt = hw_bitblt_2;
+ break;
+ default:
+ viapar->shared->hw_bitblt = NULL;
+ }
+
+ viapar->fbmem_free -= CURSOR_SIZE;
+ viapar->shared->cursor_vram_addr = viapar->fbmem_free;
+ viapar->fbmem_used += CURSOR_SIZE;
+
+ viapar->fbmem_free -= VQ_SIZE;
+ viapar->shared->vq_vram_addr = viapar->fbmem_free;
+ viapar->fbmem_used += VQ_SIZE;
+
+#if defined(CONFIG_VIDEO_VIA_CAMERA) || defined(CONFIG_VIDEO_VIA_CAMERA_MODULE)
+ /*
+ * Set aside a chunk of framebuffer memory for the camera
+ * driver. Someday this driver probably needs a proper allocator
+ * for fbmem; for now, we just have to do this before the
+ * framebuffer initializes itself.
+ *
+ * As for the size: the engine can handle three frames,
+ * 16 bits deep, up to VGA resolution.
+ */
+ viapar->shared->vdev->camera_fbmem_size = 3*VGA_HEIGHT*VGA_WIDTH*2;
+ viapar->fbmem_free -= viapar->shared->vdev->camera_fbmem_size;
+ viapar->fbmem_used += viapar->shared->vdev->camera_fbmem_size;
+ viapar->shared->vdev->camera_fbmem_offset = viapar->fbmem_free;
+#endif
+
+ viafb_reset_engine(viapar);
+ return 0;
+}
+
+void viafb_reset_engine(struct viafb_par *viapar)
+{
+ void __iomem *engine = viapar->shared->vdev->engine_mmio;
+ int highest_reg, i;
+ u32 vq_start_addr, vq_end_addr, vq_start_low, vq_end_low, vq_high,
+ vq_len, chip_name = viapar->shared->chip_info.gfx_chip_name;
+
+ /* Initialize registers to reset the 2D engine */
+ switch (viapar->shared->chip_info.twod_engine) {
+ case VIA_2D_ENG_M1:
+ highest_reg = 0x5c;
+ break;
+ default:
+ highest_reg = 0x40;
+ break;
+ }
+ for (i = 0; i <= highest_reg; i += 4)
+ writel(0x0, engine + i);
+
+ /* Init AGP and VQ regs */
+ switch (chip_name) {
+ case UNICHROME_K8M890:
+ case UNICHROME_P4M900:
+ case UNICHROME_VX800:
+ case UNICHROME_VX855:
+ case UNICHROME_VX900:
+ writel(0x00100000, engine + VIA_REG_CR_TRANSET);
+ writel(0x680A0000, engine + VIA_REG_CR_TRANSPACE);
+ writel(0x02000000, engine + VIA_REG_CR_TRANSPACE);
+ break;
+
+ default:
+ writel(0x00100000, engine + VIA_REG_TRANSET);
+ writel(0x00000000, engine + VIA_REG_TRANSPACE);
+ writel(0x00333004, engine + VIA_REG_TRANSPACE);
+ writel(0x60000000, engine + VIA_REG_TRANSPACE);
+ writel(0x61000000, engine + VIA_REG_TRANSPACE);
+ writel(0x62000000, engine + VIA_REG_TRANSPACE);
+ writel(0x63000000, engine + VIA_REG_TRANSPACE);
+ writel(0x64000000, engine + VIA_REG_TRANSPACE);
+ writel(0x7D000000, engine + VIA_REG_TRANSPACE);
+
+ writel(0xFE020000, engine + VIA_REG_TRANSET);
+ writel(0x00000000, engine + VIA_REG_TRANSPACE);
+ break;
+ }
+
+ /* Enable VQ */
+ vq_start_addr = viapar->shared->vq_vram_addr;
+ vq_end_addr = viapar->shared->vq_vram_addr + VQ_SIZE - 1;
+
+ vq_start_low = 0x50000000 | (vq_start_addr & 0xFFFFFF);
+ vq_end_low = 0x51000000 | (vq_end_addr & 0xFFFFFF);
+ vq_high = 0x52000000 | ((vq_start_addr & 0xFF000000) >> 24) |
+ ((vq_end_addr & 0xFF000000) >> 16);
+ vq_len = 0x53000000 | (VQ_SIZE >> 3);
+
+ switch (chip_name) {
+ case UNICHROME_K8M890:
+ case UNICHROME_P4M900:
+ case UNICHROME_VX800:
+ case UNICHROME_VX855:
+ case UNICHROME_VX900:
+ vq_start_low |= 0x20000000;
+ vq_end_low |= 0x20000000;
+ vq_high |= 0x20000000;
+ vq_len |= 0x20000000;
+
+ writel(0x00100000, engine + VIA_REG_CR_TRANSET);
+ writel(vq_high, engine + VIA_REG_CR_TRANSPACE);
+ writel(vq_start_low, engine + VIA_REG_CR_TRANSPACE);
+ writel(vq_end_low, engine + VIA_REG_CR_TRANSPACE);
+ writel(vq_len, engine + VIA_REG_CR_TRANSPACE);
+ writel(0x74301001, engine + VIA_REG_CR_TRANSPACE);
+ writel(0x00000000, engine + VIA_REG_CR_TRANSPACE);
+ break;
+ default:
+ writel(0x00FE0000, engine + VIA_REG_TRANSET);
+ writel(0x080003FE, engine + VIA_REG_TRANSPACE);
+ writel(0x0A00027C, engine + VIA_REG_TRANSPACE);
+ writel(0x0B000260, engine + VIA_REG_TRANSPACE);
+ writel(0x0C000274, engine + VIA_REG_TRANSPACE);
+ writel(0x0D000264, engine + VIA_REG_TRANSPACE);
+ writel(0x0E000000, engine + VIA_REG_TRANSPACE);
+ writel(0x0F000020, engine + VIA_REG_TRANSPACE);
+ writel(0x1000027E, engine + VIA_REG_TRANSPACE);
+ writel(0x110002FE, engine + VIA_REG_TRANSPACE);
+ writel(0x200F0060, engine + VIA_REG_TRANSPACE);
+
+ writel(0x00000006, engine + VIA_REG_TRANSPACE);
+ writel(0x40008C0F, engine + VIA_REG_TRANSPACE);
+ writel(0x44000000, engine + VIA_REG_TRANSPACE);
+ writel(0x45080C04, engine + VIA_REG_TRANSPACE);
+ writel(0x46800408, engine + VIA_REG_TRANSPACE);
+
+ writel(vq_high, engine + VIA_REG_TRANSPACE);
+ writel(vq_start_low, engine + VIA_REG_TRANSPACE);
+ writel(vq_end_low, engine + VIA_REG_TRANSPACE);
+ writel(vq_len, engine + VIA_REG_TRANSPACE);
+ break;
+ }
+
+ /* Set Cursor Image Base Address */
+ writel(viapar->shared->cursor_vram_addr, engine + VIA_REG_CURSOR_MODE);
+ writel(0x0, engine + VIA_REG_CURSOR_POS);
+ writel(0x0, engine + VIA_REG_CURSOR_ORG);
+ writel(0x0, engine + VIA_REG_CURSOR_BG);
+ writel(0x0, engine + VIA_REG_CURSOR_FG);
+ return;
+}
+
+void viafb_show_hw_cursor(struct fb_info *info, int Status)
+{
+ struct viafb_par *viapar = info->par;
+ u32 temp, iga_path = viapar->iga_path;
+
+ temp = readl(viapar->shared->vdev->engine_mmio + VIA_REG_CURSOR_MODE);
+ switch (Status) {
+ case HW_Cursor_ON:
+ temp |= 0x1;
+ break;
+ case HW_Cursor_OFF:
+ temp &= 0xFFFFFFFE;
+ break;
+ }
+ switch (iga_path) {
+ case IGA2:
+ temp |= 0x80000000;
+ break;
+ case IGA1:
+ default:
+ temp &= 0x7FFFFFFF;
+ }
+ writel(temp, viapar->shared->vdev->engine_mmio + VIA_REG_CURSOR_MODE);
+}
+
+void viafb_wait_engine_idle(struct fb_info *info)
+{
+ struct viafb_par *viapar = info->par;
+ int loop = 0;
+ u32 mask;
+ void __iomem *engine = viapar->shared->vdev->engine_mmio;
+
+ switch (viapar->shared->chip_info.twod_engine) {
+ case VIA_2D_ENG_H5:
+ case VIA_2D_ENG_M1:
+ mask = VIA_CMD_RGTR_BUSY_M1 | VIA_2D_ENG_BUSY_M1 |
+ VIA_3D_ENG_BUSY_M1;
+ break;
+ default:
+ while (!(readl(engine + VIA_REG_STATUS) &
+ VIA_VR_QUEUE_BUSY) && (loop < MAXLOOP)) {
+ loop++;
+ cpu_relax();
+ }
+ mask = VIA_CMD_RGTR_BUSY | VIA_2D_ENG_BUSY | VIA_3D_ENG_BUSY;
+ break;
+ }
+
+ while ((readl(engine + VIA_REG_STATUS) & mask) && (loop < MAXLOOP)) {
+ loop++;
+ cpu_relax();
+ }
+
+ if (loop >= MAXLOOP)
+ printk(KERN_ERR "viafb_wait_engine_idle: not syncing\n");
+}
Code Review / kvmfornfv.git / blobdiff