#ifdef CONFIG_PMAC_BACKLIGHT
#include <asm/backlight.h>
#endif
-#ifdef CONFIG_MTRR
-#include <asm/mtrr.h>
-#endif
/*
* Debug flags.
};
static bool noaccel;
-#ifdef CONFIG_MTRR
static bool nomtrr;
-#endif
static int vram;
static int pll;
static int mclk;
#endif /* CONFIG_FB_ATY_CT */
};
+/*
+ * Last page of 8 MB (4 MB on ISA) aperture is MMIO,
+ * unless the auxiliary register aperture is used.
+ */
+static void aty_fudge_framebuffer_len(struct fb_info *info)
+{
+ struct atyfb_par *par = (struct atyfb_par *) info->par;
+
+ if (!par->aux_start &&
+ (info->fix.smem_len == 0x800000 ||
+ (par->bus_type == ISA && info->fix.smem_len == 0x400000)))
+ info->fix.smem_len -= GUI_RESERVE;
+}
+
static int correct_chipset(struct atyfb_par *par)
{
u8 rev;
if (par->pll_ops->resume_pll)
par->pll_ops->resume_pll(info, &par->pll);
- /*
- * Last page of 8 MB (4 MB on ISA) aperture is MMIO,
- * unless the auxiliary register aperture is used.
- */
- if (!par->aux_start &&
- (info->fix.smem_len == 0x800000 ||
- (par->bus_type == ISA && info->fix.smem_len == 0x400000)))
- info->fix.smem_len -= GUI_RESERVE;
+ aty_fudge_framebuffer_len(info);
/*
* Disable register access through the linear aperture
aty_st_le32(BUS_CNTL, aty_ld_le32(BUS_CNTL, par) |
BUS_APER_REG_DIS, par);
-#ifdef CONFIG_MTRR
- par->mtrr_aper = -1;
- par->mtrr_reg = -1;
- if (!nomtrr) {
- /* Cover the whole resource. */
- par->mtrr_aper = mtrr_add(par->res_start, par->res_size,
- MTRR_TYPE_WRCOMB, 1);
- if (par->mtrr_aper >= 0 && !par->aux_start) {
- /* Make a hole for mmio. */
- par->mtrr_reg = mtrr_add(par->res_start + 0x800000 -
- GUI_RESERVE, GUI_RESERVE,
- MTRR_TYPE_UNCACHABLE, 1);
- if (par->mtrr_reg < 0) {
- mtrr_del(par->mtrr_aper, 0, 0);
- par->mtrr_aper = -1;
- }
- }
- }
-#endif
+ if (!nomtrr)
+ /*
+ * Only the ioremap_wc()'d area will get WC here
+ * since ioremap_uc() was used on the entire PCI BAR.
+ */
+ par->wc_cookie = arch_phys_wc_add(par->res_start,
+ par->res_size);
info->fbops = &atyfb_ops;
info->pseudo_palette = par->pseudo_palette;
/* restore video mode */
aty_set_crtc(par, &par->saved_crtc);
par->pll_ops->set_pll(info, &par->saved_pll);
+ arch_phys_wc_del(par->wc_cookie);
-#ifdef CONFIG_MTRR
- if (par->mtrr_reg >= 0) {
- mtrr_del(par->mtrr_reg, 0, 0);
- par->mtrr_reg = -1;
- }
- if (par->mtrr_aper >= 0) {
- mtrr_del(par->mtrr_aper, 0, 0);
- par->mtrr_aper = -1;
- }
-#endif
return ret;
}
}
info->fix.mmio_start = raddr;
- par->ati_regbase = ioremap(info->fix.mmio_start, 0x1000);
+ /*
+ * By using strong UC we force the MTRR to never have an
+ * effect on the MMIO region on both non-PAT and PAT systems.
+ */
+ par->ati_regbase = ioremap_uc(info->fix.mmio_start, 0x1000);
if (par->ati_regbase == NULL)
return -ENOMEM;
/* Map in frame buffer */
info->fix.smem_start = addr;
- info->screen_base = ioremap(addr, 0x800000);
+
+ /*
+ * The framebuffer is not always 8 MiB, that's just the size of the
+ * PCI BAR. We temporarily abuse smem_len here to store the size
+ * of the BAR. aty_init() will later correct it to match the actual
+ * framebuffer size.
+ *
+ * On devices that don't have the auxiliary register aperture, the
+ * registers are housed at the top end of the framebuffer PCI BAR.
+ * aty_fudge_framebuffer_len() is used to reduce smem_len to not
+ * overlap with the registers.
+ */
+ info->fix.smem_len = 0x800000;
+
+ aty_fudge_framebuffer_len(info);
+
+ info->screen_base = ioremap_wc(info->fix.smem_start,
+ info->fix.smem_len);
if (info->screen_base == NULL) {
ret = -ENOMEM;
goto atyfb_setup_generic_fail;
return -ENOMEM;
}
par = info->par;
+ par->bus_type = PCI;
info->fix = atyfb_fix;
info->device = &pdev->dev;
par->pci_id = pdev->device;
* Map the video memory (physical address given)
* to somewhere in the kernel address space.
*/
- info->screen_base = ioremap(phys_vmembase[m64_num], phys_size[m64_num]);
+ info->screen_base = ioremap_wc(phys_vmembase[m64_num],
+ phys_size[m64_num]);
info->fix.smem_start = (unsigned long)info->screen_base; /* Fake! */
par->ati_regbase = ioremap(phys_guiregbase[m64_num], 0x10000) +
0xFC00ul;
if (M64_HAS(MOBIL_BUS))
aty_bl_exit(info->bl_dev);
#endif
+ arch_phys_wc_del(par->wc_cookie);
-#ifdef CONFIG_MTRR
- if (par->mtrr_reg >= 0) {
- mtrr_del(par->mtrr_reg, 0, 0);
- par->mtrr_reg = -1;
- }
- if (par->mtrr_aper >= 0) {
- mtrr_del(par->mtrr_aper, 0, 0);
- par->mtrr_aper = -1;
- }
-#endif
#ifndef __sparc__
if (par->ati_regbase)
iounmap(par->ati_regbase);
while ((this_opt = strsep(&options, ",")) != NULL) {
if (!strncmp(this_opt, "noaccel", 7)) {
noaccel = 1;
-#ifdef CONFIG_MTRR
} else if (!strncmp(this_opt, "nomtrr", 6)) {
nomtrr = 1;
-#endif
} else if (!strncmp(this_opt, "vram:", 5))
vram = simple_strtoul(this_opt + 5, NULL, 0);
else if (!strncmp(this_opt, "pll:", 4))
MODULE_PARM_DESC(comp_sync, "Set composite sync signal to low (0) or high (1)");
module_param(mode, charp, 0);
MODULE_PARM_DESC(mode, "Specify resolution as \"<xres>x<yres>[-<bpp>][@<refresh>]\" ");
-#ifdef CONFIG_MTRR
module_param(nomtrr, bool, 0);
MODULE_PARM_DESC(nomtrr, "bool: disable use of MTRR registers");
-#endif
Code Review / kvmfornfv.git / blobdiff