--- /dev/null
+/*
+ * linux/drivers/video/amba-clcd.c
+ *
+ * Copyright (C) 2001 ARM Limited, by David A Rusling
+ * Updated to 2.5, Deep Blue Solutions Ltd.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ *
+ * ARM PrimeCell PL110 Color LCD Controller
+ */
+#include <linux/dma-mapping.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/mm.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/list.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/clcd.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/hardirq.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_graph.h>
+#include <video/display_timing.h>
+#include <video/of_display_timing.h>
+#include <video/videomode.h>
+
+#include <asm/sizes.h>
+
+#define to_clcd(info) container_of(info, struct clcd_fb, fb)
+
+/* This is limited to 16 characters when displayed by X startup */
+static const char *clcd_name = "CLCD FB";
+
+/*
+ * Unfortunately, the enable/disable functions may be called either from
+ * process or IRQ context, and we _need_ to delay. This is _not_ good.
+ */
+static inline void clcdfb_sleep(unsigned int ms)
+{
+ if (in_atomic()) {
+ mdelay(ms);
+ } else {
+ msleep(ms);
+ }
+}
+
+static inline void clcdfb_set_start(struct clcd_fb *fb)
+{
+ unsigned long ustart = fb->fb.fix.smem_start;
+ unsigned long lstart;
+
+ ustart += fb->fb.var.yoffset * fb->fb.fix.line_length;
+ lstart = ustart + fb->fb.var.yres * fb->fb.fix.line_length / 2;
+
+ writel(ustart, fb->regs + CLCD_UBAS);
+ writel(lstart, fb->regs + CLCD_LBAS);
+}
+
+static void clcdfb_disable(struct clcd_fb *fb)
+{
+ u32 val;
+
+ if (fb->board->disable)
+ fb->board->disable(fb);
+
+ val = readl(fb->regs + fb->off_cntl);
+ if (val & CNTL_LCDPWR) {
+ val &= ~CNTL_LCDPWR;
+ writel(val, fb->regs + fb->off_cntl);
+
+ clcdfb_sleep(20);
+ }
+ if (val & CNTL_LCDEN) {
+ val &= ~CNTL_LCDEN;
+ writel(val, fb->regs + fb->off_cntl);
+ }
+
+ /*
+ * Disable CLCD clock source.
+ */
+ if (fb->clk_enabled) {
+ fb->clk_enabled = false;
+ clk_disable(fb->clk);
+ }
+}
+
+static void clcdfb_enable(struct clcd_fb *fb, u32 cntl)
+{
+ /*
+ * Enable the CLCD clock source.
+ */
+ if (!fb->clk_enabled) {
+ fb->clk_enabled = true;
+ clk_enable(fb->clk);
+ }
+
+ /*
+ * Bring up by first enabling..
+ */
+ cntl |= CNTL_LCDEN;
+ writel(cntl, fb->regs + fb->off_cntl);
+
+ clcdfb_sleep(20);
+
+ /*
+ * and now apply power.
+ */
+ cntl |= CNTL_LCDPWR;
+ writel(cntl, fb->regs + fb->off_cntl);
+
+ /*
+ * finally, enable the interface.
+ */
+ if (fb->board->enable)
+ fb->board->enable(fb);
+}
+
+static int
+clcdfb_set_bitfields(struct clcd_fb *fb, struct fb_var_screeninfo *var)
+{
+ u32 caps;
+ int ret = 0;
+
+ if (fb->panel->caps && fb->board->caps)
+ caps = fb->panel->caps & fb->board->caps;
+ else {
+ /* Old way of specifying what can be used */
+ caps = fb->panel->cntl & CNTL_BGR ?
+ CLCD_CAP_BGR : CLCD_CAP_RGB;
+ /* But mask out 444 modes as they weren't supported */
+ caps &= ~CLCD_CAP_444;
+ }
+
+ /* Only TFT panels can do RGB888/BGR888 */
+ if (!(fb->panel->cntl & CNTL_LCDTFT))
+ caps &= ~CLCD_CAP_888;
+
+ memset(&var->transp, 0, sizeof(var->transp));
+
+ var->red.msb_right = 0;
+ var->green.msb_right = 0;
+ var->blue.msb_right = 0;
+
+ switch (var->bits_per_pixel) {
+ case 1:
+ case 2:
+ case 4:
+ case 8:
+ /* If we can't do 5551, reject */
+ caps &= CLCD_CAP_5551;
+ if (!caps) {
+ ret = -EINVAL;
+ break;
+ }
+
+ var->red.length = var->bits_per_pixel;
+ var->red.offset = 0;
+ var->green.length = var->bits_per_pixel;
+ var->green.offset = 0;
+ var->blue.length = var->bits_per_pixel;
+ var->blue.offset = 0;
+ break;
+
+ case 16:
+ /* If we can't do 444, 5551 or 565, reject */
+ if (!(caps & (CLCD_CAP_444 | CLCD_CAP_5551 | CLCD_CAP_565))) {
+ ret = -EINVAL;
+ break;
+ }
+
+ /*
+ * Green length can be 4, 5 or 6 depending whether
+ * we're operating in 444, 5551 or 565 mode.
+ */
+ if (var->green.length == 4 && caps & CLCD_CAP_444)
+ caps &= CLCD_CAP_444;
+ if (var->green.length == 5 && caps & CLCD_CAP_5551)
+ caps &= CLCD_CAP_5551;
+ else if (var->green.length == 6 && caps & CLCD_CAP_565)
+ caps &= CLCD_CAP_565;
+ else {
+ /*
+ * PL110 officially only supports RGB555,
+ * but may be wired up to allow RGB565.
+ */
+ if (caps & CLCD_CAP_565) {
+ var->green.length = 6;
+ caps &= CLCD_CAP_565;
+ } else if (caps & CLCD_CAP_5551) {
+ var->green.length = 5;
+ caps &= CLCD_CAP_5551;
+ } else {
+ var->green.length = 4;
+ caps &= CLCD_CAP_444;
+ }
+ }
+
+ if (var->green.length >= 5) {
+ var->red.length = 5;
+ var->blue.length = 5;
+ } else {
+ var->red.length = 4;
+ var->blue.length = 4;
+ }
+ break;
+ case 32:
+ /* If we can't do 888, reject */
+ caps &= CLCD_CAP_888;
+ if (!caps) {
+ ret = -EINVAL;
+ break;
+ }
+
+ var->red.length = 8;
+ var->green.length = 8;
+ var->blue.length = 8;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ /*
+ * >= 16bpp displays have separate colour component bitfields
+ * encoded in the pixel data. Calculate their position from
+ * the bitfield length defined above.
+ */
+ if (ret == 0 && var->bits_per_pixel >= 16) {
+ bool bgr, rgb;
+
+ bgr = caps & CLCD_CAP_BGR && var->blue.offset == 0;
+ rgb = caps & CLCD_CAP_RGB && var->red.offset == 0;
+
+ if (!bgr && !rgb)
+ /*
+ * The requested format was not possible, try just
+ * our capabilities. One of BGR or RGB must be
+ * supported.
+ */
+ bgr = caps & CLCD_CAP_BGR;
+
+ if (bgr) {
+ var->blue.offset = 0;
+ var->green.offset = var->blue.offset + var->blue.length;
+ var->red.offset = var->green.offset + var->green.length;
+ } else {
+ var->red.offset = 0;
+ var->green.offset = var->red.offset + var->red.length;
+ var->blue.offset = var->green.offset + var->green.length;
+ }
+ }
+
+ return ret;
+}
+
+static int clcdfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
+{
+ struct clcd_fb *fb = to_clcd(info);
+ int ret = -EINVAL;
+
+ if (fb->board->check)
+ ret = fb->board->check(fb, var);
+
+ if (ret == 0 &&
+ var->xres_virtual * var->bits_per_pixel / 8 *
+ var->yres_virtual > fb->fb.fix.smem_len)
+ ret = -EINVAL;
+
+ if (ret == 0)
+ ret = clcdfb_set_bitfields(fb, var);
+
+ return ret;
+}
+
+static int clcdfb_set_par(struct fb_info *info)
+{
+ struct clcd_fb *fb = to_clcd(info);
+ struct clcd_regs regs;
+
+ fb->fb.fix.line_length = fb->fb.var.xres_virtual *
+ fb->fb.var.bits_per_pixel / 8;
+
+ if (fb->fb.var.bits_per_pixel <= 8)
+ fb->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR;
+ else
+ fb->fb.fix.visual = FB_VISUAL_TRUECOLOR;
+
+ fb->board->decode(fb, ®s);
+
+ clcdfb_disable(fb);
+
+ writel(regs.tim0, fb->regs + CLCD_TIM0);
+ writel(regs.tim1, fb->regs + CLCD_TIM1);
+ writel(regs.tim2, fb->regs + CLCD_TIM2);
+ writel(regs.tim3, fb->regs + CLCD_TIM3);
+
+ clcdfb_set_start(fb);
+
+ clk_set_rate(fb->clk, (1000000000 / regs.pixclock) * 1000);
+
+ fb->clcd_cntl = regs.cntl;
+
+ clcdfb_enable(fb, regs.cntl);
+
+#ifdef DEBUG
+ printk(KERN_INFO
+ "CLCD: Registers set to\n"
+ " %08x %08x %08x %08x\n"
+ " %08x %08x %08x %08x\n",
+ readl(fb->regs + CLCD_TIM0), readl(fb->regs + CLCD_TIM1),
+ readl(fb->regs + CLCD_TIM2), readl(fb->regs + CLCD_TIM3),
+ readl(fb->regs + CLCD_UBAS), readl(fb->regs + CLCD_LBAS),
+ readl(fb->regs + fb->off_ienb), readl(fb->regs + fb->off_cntl));
+#endif
+
+ return 0;
+}
+
+static inline u32 convert_bitfield(int val, struct fb_bitfield *bf)
+{
+ unsigned int mask = (1 << bf->length) - 1;
+
+ return (val >> (16 - bf->length) & mask) << bf->offset;
+}
+
+/*
+ * Set a single color register. The values supplied have a 16 bit
+ * magnitude. Return != 0 for invalid regno.
+ */
+static int
+clcdfb_setcolreg(unsigned int regno, unsigned int red, unsigned int green,
+ unsigned int blue, unsigned int transp, struct fb_info *info)
+{
+ struct clcd_fb *fb = to_clcd(info);
+
+ if (regno < 16)
+ fb->cmap[regno] = convert_bitfield(transp, &fb->fb.var.transp) |
+ convert_bitfield(blue, &fb->fb.var.blue) |
+ convert_bitfield(green, &fb->fb.var.green) |
+ convert_bitfield(red, &fb->fb.var.red);
+
+ if (fb->fb.fix.visual == FB_VISUAL_PSEUDOCOLOR && regno < 256) {
+ int hw_reg = CLCD_PALETTE + ((regno * 2) & ~3);
+ u32 val, mask, newval;
+
+ newval = (red >> 11) & 0x001f;
+ newval |= (green >> 6) & 0x03e0;
+ newval |= (blue >> 1) & 0x7c00;
+
+ /*
+ * 3.2.11: if we're configured for big endian
+ * byte order, the palette entries are swapped.
+ */
+ if (fb->clcd_cntl & CNTL_BEBO)
+ regno ^= 1;
+
+ if (regno & 1) {
+ newval <<= 16;
+ mask = 0x0000ffff;
+ } else {
+ mask = 0xffff0000;
+ }
+
+ val = readl(fb->regs + hw_reg) & mask;
+ writel(val | newval, fb->regs + hw_reg);
+ }
+
+ return regno > 255;
+}
+
+/*
+ * Blank the screen if blank_mode != 0, else unblank. If blank == NULL
+ * then the caller blanks by setting the CLUT (Color Look Up Table) to all
+ * black. Return 0 if blanking succeeded, != 0 if un-/blanking failed due
+ * to e.g. a video mode which doesn't support it. Implements VESA suspend
+ * and powerdown modes on hardware that supports disabling hsync/vsync:
+ * blank_mode == 2: suspend vsync
+ * blank_mode == 3: suspend hsync
+ * blank_mode == 4: powerdown
+ */
+static int clcdfb_blank(int blank_mode, struct fb_info *info)
+{
+ struct clcd_fb *fb = to_clcd(info);
+
+ if (blank_mode != 0) {
+ clcdfb_disable(fb);
+ } else {
+ clcdfb_enable(fb, fb->clcd_cntl);
+ }
+ return 0;
+}
+
+static int clcdfb_mmap(struct fb_info *info,
+ struct vm_area_struct *vma)
+{
+ struct clcd_fb *fb = to_clcd(info);
+ unsigned long len, off = vma->vm_pgoff << PAGE_SHIFT;
+ int ret = -EINVAL;
+
+ len = info->fix.smem_len;
+
+ if (off <= len && vma->vm_end - vma->vm_start <= len - off &&
+ fb->board->mmap)
+ ret = fb->board->mmap(fb, vma);
+
+ return ret;
+}
+
+static struct fb_ops clcdfb_ops = {
+ .owner = THIS_MODULE,
+ .fb_check_var = clcdfb_check_var,
+ .fb_set_par = clcdfb_set_par,
+ .fb_setcolreg = clcdfb_setcolreg,
+ .fb_blank = clcdfb_blank,
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
+ .fb_mmap = clcdfb_mmap,
+};
+
+static int clcdfb_register(struct clcd_fb *fb)
+{
+ int ret;
+
+ /*
+ * ARM PL111 always has IENB at 0x1c; it's only PL110
+ * which is reversed on some platforms.
+ */
+ if (amba_manf(fb->dev) == 0x41 && amba_part(fb->dev) == 0x111) {
+ fb->off_ienb = CLCD_PL111_IENB;
+ fb->off_cntl = CLCD_PL111_CNTL;
+ } else {
+#ifdef CONFIG_ARCH_VERSATILE
+ fb->off_ienb = CLCD_PL111_IENB;
+ fb->off_cntl = CLCD_PL111_CNTL;
+#else
+ fb->off_ienb = CLCD_PL110_IENB;
+ fb->off_cntl = CLCD_PL110_CNTL;
+#endif
+ }
+
+ fb->clk = clk_get(&fb->dev->dev, NULL);
+ if (IS_ERR(fb->clk)) {
+ ret = PTR_ERR(fb->clk);
+ goto out;
+ }
+
+ ret = clk_prepare(fb->clk);
+ if (ret)
+ goto free_clk;
+
+ fb->fb.device = &fb->dev->dev;
+
+ fb->fb.fix.mmio_start = fb->dev->res.start;
+ fb->fb.fix.mmio_len = resource_size(&fb->dev->res);
+
+ fb->regs = ioremap(fb->fb.fix.mmio_start, fb->fb.fix.mmio_len);
+ if (!fb->regs) {
+ printk(KERN_ERR "CLCD: unable to remap registers\n");
+ ret = -ENOMEM;
+ goto clk_unprep;
+ }
+
+ fb->fb.fbops = &clcdfb_ops;
+ fb->fb.flags = FBINFO_FLAG_DEFAULT;
+ fb->fb.pseudo_palette = fb->cmap;
+
+ strncpy(fb->fb.fix.id, clcd_name, sizeof(fb->fb.fix.id));
+ fb->fb.fix.type = FB_TYPE_PACKED_PIXELS;
+ fb->fb.fix.type_aux = 0;
+ fb->fb.fix.xpanstep = 0;
+ fb->fb.fix.ypanstep = 0;
+ fb->fb.fix.ywrapstep = 0;
+ fb->fb.fix.accel = FB_ACCEL_NONE;
+
+ fb->fb.var.xres = fb->panel->mode.xres;
+ fb->fb.var.yres = fb->panel->mode.yres;
+ fb->fb.var.xres_virtual = fb->panel->mode.xres;
+ fb->fb.var.yres_virtual = fb->panel->mode.yres;
+ fb->fb.var.bits_per_pixel = fb->panel->bpp;
+ fb->fb.var.grayscale = fb->panel->grayscale;
+ fb->fb.var.pixclock = fb->panel->mode.pixclock;
+ fb->fb.var.left_margin = fb->panel->mode.left_margin;
+ fb->fb.var.right_margin = fb->panel->mode.right_margin;
+ fb->fb.var.upper_margin = fb->panel->mode.upper_margin;
+ fb->fb.var.lower_margin = fb->panel->mode.lower_margin;
+ fb->fb.var.hsync_len = fb->panel->mode.hsync_len;
+ fb->fb.var.vsync_len = fb->panel->mode.vsync_len;
+ fb->fb.var.sync = fb->panel->mode.sync;
+ fb->fb.var.vmode = fb->panel->mode.vmode;
+ fb->fb.var.activate = FB_ACTIVATE_NOW;
+ fb->fb.var.nonstd = 0;
+ fb->fb.var.height = fb->panel->height;
+ fb->fb.var.width = fb->panel->width;
+ fb->fb.var.accel_flags = 0;
+
+ fb->fb.monspecs.hfmin = 0;
+ fb->fb.monspecs.hfmax = 100000;
+ fb->fb.monspecs.vfmin = 0;
+ fb->fb.monspecs.vfmax = 400;
+ fb->fb.monspecs.dclkmin = 1000000;
+ fb->fb.monspecs.dclkmax = 100000000;
+
+ /*
+ * Make sure that the bitfields are set appropriately.
+ */
+ clcdfb_set_bitfields(fb, &fb->fb.var);
+
+ /*
+ * Allocate colourmap.
+ */
+ ret = fb_alloc_cmap(&fb->fb.cmap, 256, 0);
+ if (ret)
+ goto unmap;
+
+ /*
+ * Ensure interrupts are disabled.
+ */
+ writel(0, fb->regs + fb->off_ienb);
+
+ fb_set_var(&fb->fb, &fb->fb.var);
+
+ dev_info(&fb->dev->dev, "%s hardware, %s display\n",
+ fb->board->name, fb->panel->mode.name);
+
+ ret = register_framebuffer(&fb->fb);
+ if (ret == 0)
+ goto out;
+
+ printk(KERN_ERR "CLCD: cannot register framebuffer (%d)\n", ret);
+
+ fb_dealloc_cmap(&fb->fb.cmap);
+ unmap:
+ iounmap(fb->regs);
+ clk_unprep:
+ clk_unprepare(fb->clk);
+ free_clk:
+ clk_put(fb->clk);
+ out:
+ return ret;
+}
+
+#ifdef CONFIG_OF
+static int clcdfb_of_get_dpi_panel_mode(struct device_node *node,
+ struct fb_videomode *mode)
+{
+ int err;
+ struct display_timing timing;
+ struct videomode video;
+
+ err = of_get_display_timing(node, "panel-timing", &timing);
+ if (err)
+ return err;
+
+ videomode_from_timing(&timing, &video);
+
+ err = fb_videomode_from_videomode(&video, mode);
+ if (err)
+ return err;
+
+ return 0;
+}
+
+static int clcdfb_snprintf_mode(char *buf, int size, struct fb_videomode *mode)
+{
+ return snprintf(buf, size, "%ux%u@%u", mode->xres, mode->yres,
+ mode->refresh);
+}
+
+static int clcdfb_of_get_mode(struct device *dev, struct device_node *endpoint,
+ struct fb_videomode *mode)
+{
+ int err;
+ struct device_node *panel;
+ char *name;
+ int len;
+
+ panel = of_graph_get_remote_port_parent(endpoint);
+ if (!panel)
+ return -ENODEV;
+
+ /* Only directly connected DPI panels supported for now */
+ if (of_device_is_compatible(panel, "panel-dpi"))
+ err = clcdfb_of_get_dpi_panel_mode(panel, mode);
+ else
+ err = -ENOENT;
+ if (err)
+ return err;
+
+ len = clcdfb_snprintf_mode(NULL, 0, mode);
+ name = devm_kzalloc(dev, len + 1, GFP_KERNEL);
+ if (!name)
+ return -ENOMEM;
+
+ clcdfb_snprintf_mode(name, len + 1, mode);
+ mode->name = name;
+
+ return 0;
+}
+
+static int clcdfb_of_init_tft_panel(struct clcd_fb *fb, u32 r0, u32 g0, u32 b0)
+{
+ static struct {
+ unsigned int part;
+ u32 r0, g0, b0;
+ u32 caps;
+ } panels[] = {
+ { 0x110, 1, 7, 13, CLCD_CAP_5551 },
+ { 0x110, 0, 8, 16, CLCD_CAP_888 },
+ { 0x111, 4, 14, 20, CLCD_CAP_444 },
+ { 0x111, 3, 11, 19, CLCD_CAP_444 | CLCD_CAP_5551 },
+ { 0x111, 3, 10, 19, CLCD_CAP_444 | CLCD_CAP_5551 |
+ CLCD_CAP_565 },
+ { 0x111, 0, 8, 16, CLCD_CAP_444 | CLCD_CAP_5551 |
+ CLCD_CAP_565 | CLCD_CAP_888 },
+ };
+ int i;
+
+ /* Bypass pixel clock divider, data output on the falling edge */
+ fb->panel->tim2 = TIM2_BCD | TIM2_IPC;
+
+ /* TFT display, vert. comp. interrupt at the start of the back porch */
+ fb->panel->cntl |= CNTL_LCDTFT | CNTL_LCDVCOMP(1);
+
+ fb->panel->caps = 0;
+
+ /* Match the setup with known variants */
+ for (i = 0; i < ARRAY_SIZE(panels) && !fb->panel->caps; i++) {
+ if (amba_part(fb->dev) != panels[i].part)
+ continue;
+ if (g0 != panels[i].g0)
+ continue;
+ if (r0 == panels[i].r0 && b0 == panels[i].b0)
+ fb->panel->caps = panels[i].caps;
+ }
+
+ return fb->panel->caps ? 0 : -EINVAL;
+}
+
+static int clcdfb_of_init_display(struct clcd_fb *fb)
+{
+ struct device_node *endpoint;
+ int err;
+ unsigned int bpp;
+ u32 max_bandwidth;
+ u32 tft_r0b0g0[3];
+
+ fb->panel = devm_kzalloc(&fb->dev->dev, sizeof(*fb->panel), GFP_KERNEL);
+ if (!fb->panel)
+ return -ENOMEM;
+
+ endpoint = of_graph_get_next_endpoint(fb->dev->dev.of_node, NULL);
+ if (!endpoint)
+ return -ENODEV;
+
+ err = clcdfb_of_get_mode(&fb->dev->dev, endpoint, &fb->panel->mode);
+ if (err)
+ return err;
+
+ err = of_property_read_u32(fb->dev->dev.of_node, "max-memory-bandwidth",
+ &max_bandwidth);
+ if (!err) {
+ /*
+ * max_bandwidth is in bytes per second and pixclock in
+ * pico-seconds, so the maximum allowed bits per pixel is
+ * 8 * max_bandwidth / (PICOS2KHZ(pixclock) * 1000)
+ * Rearrange this calculation to avoid overflow and then ensure
+ * result is a valid format.
+ */
+ bpp = max_bandwidth / (1000 / 8)
+ / PICOS2KHZ(fb->panel->mode.pixclock);
+ bpp = rounddown_pow_of_two(bpp);
+ if (bpp > 32)
+ bpp = 32;
+ } else
+ bpp = 32;
+ fb->panel->bpp = bpp;
+
+#ifdef CONFIG_CPU_BIG_ENDIAN
+ fb->panel->cntl |= CNTL_BEBO;
+#endif
+ fb->panel->width = -1;
+ fb->panel->height = -1;
+
+ if (of_property_read_u32_array(endpoint,
+ "arm,pl11x,tft-r0g0b0-pads",
+ tft_r0b0g0, ARRAY_SIZE(tft_r0b0g0)) == 0)
+ return clcdfb_of_init_tft_panel(fb, tft_r0b0g0[0],
+ tft_r0b0g0[1], tft_r0b0g0[2]);
+
+ return -ENOENT;
+}
+
+static int clcdfb_of_vram_setup(struct clcd_fb *fb)
+{
+ int err;
+ struct device_node *memory;
+ u64 size;
+
+ err = clcdfb_of_init_display(fb);
+ if (err)
+ return err;
+
+ memory = of_parse_phandle(fb->dev->dev.of_node, "memory-region", 0);
+ if (!memory)
+ return -ENODEV;
+
+ fb->fb.screen_base = of_iomap(memory, 0);
+ if (!fb->fb.screen_base)
+ return -ENOMEM;
+
+ fb->fb.fix.smem_start = of_translate_address(memory,
+ of_get_address(memory, 0, &size, NULL));
+ fb->fb.fix.smem_len = size;
+
+ return 0;
+}
+
+static int clcdfb_of_vram_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
+{
+ unsigned long off, user_size, kernel_size;
+
+
+ off = vma->vm_pgoff << PAGE_SHIFT;
+ user_size = vma->vm_end - vma->vm_start;
+ kernel_size = fb->fb.fix.smem_len;
+
+ if (off >= kernel_size || user_size > (kernel_size - off))
+ return -ENXIO;
+
+ return remap_pfn_range(vma, vma->vm_start,
+ __phys_to_pfn(fb->fb.fix.smem_start) + vma->vm_pgoff,
+ user_size,
+ pgprot_writecombine(vma->vm_page_prot));
+}
+
+static void clcdfb_of_vram_remove(struct clcd_fb *fb)
+{
+ iounmap(fb->fb.screen_base);
+}
+
+static int clcdfb_of_dma_setup(struct clcd_fb *fb)
+{
+ unsigned long framesize;
+ dma_addr_t dma;
+ int err;
+
+ err = clcdfb_of_init_display(fb);
+ if (err)
+ return err;
+
+ framesize = fb->panel->mode.xres * fb->panel->mode.yres *
+ fb->panel->bpp / 8;
+ fb->fb.screen_base = dma_alloc_coherent(&fb->dev->dev, framesize,
+ &dma, GFP_KERNEL);
+ if (!fb->fb.screen_base)
+ return -ENOMEM;
+
+ fb->fb.fix.smem_start = dma;
+ fb->fb.fix.smem_len = framesize;
+
+ return 0;
+}
+
+static int clcdfb_of_dma_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
+{
+ return dma_mmap_writecombine(&fb->dev->dev, vma, fb->fb.screen_base,
+ fb->fb.fix.smem_start, fb->fb.fix.smem_len);
+}
+
+static void clcdfb_of_dma_remove(struct clcd_fb *fb)
+{
+ dma_free_coherent(&fb->dev->dev, fb->fb.fix.smem_len,
+ fb->fb.screen_base, fb->fb.fix.smem_start);
+}
+
+static struct clcd_board *clcdfb_of_get_board(struct amba_device *dev)
+{
+ struct clcd_board *board = devm_kzalloc(&dev->dev, sizeof(*board),
+ GFP_KERNEL);
+ struct device_node *node = dev->dev.of_node;
+
+ if (!board)
+ return NULL;
+
+ board->name = of_node_full_name(node);
+ board->caps = CLCD_CAP_ALL;
+ board->check = clcdfb_check;
+ board->decode = clcdfb_decode;
+ if (of_find_property(node, "memory-region", NULL)) {
+ board->setup = clcdfb_of_vram_setup;
+ board->mmap = clcdfb_of_vram_mmap;
+ board->remove = clcdfb_of_vram_remove;
+ } else {
+ board->setup = clcdfb_of_dma_setup;
+ board->mmap = clcdfb_of_dma_mmap;
+ board->remove = clcdfb_of_dma_remove;
+ }
+
+ return board;
+}
+#else
+static struct clcd_board *clcdfb_of_get_board(struct amba_device *dev)
+{
+ return NULL;
+}
+#endif
+
+static int clcdfb_probe(struct amba_device *dev, const struct amba_id *id)
+{
+ struct clcd_board *board = dev_get_platdata(&dev->dev);
+ struct clcd_fb *fb;
+ int ret;
+
+ if (!board)
+ board = clcdfb_of_get_board(dev);
+
+ if (!board)
+ return -EINVAL;
+
+ ret = dma_set_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32));
+ if (ret)
+ goto out;
+
+ ret = amba_request_regions(dev, NULL);
+ if (ret) {
+ printk(KERN_ERR "CLCD: unable to reserve regs region\n");
+ goto out;
+ }
+
+ fb = kzalloc(sizeof(struct clcd_fb), GFP_KERNEL);
+ if (!fb) {
+ printk(KERN_INFO "CLCD: could not allocate new clcd_fb struct\n");
+ ret = -ENOMEM;
+ goto free_region;
+ }
+
+ fb->dev = dev;
+ fb->board = board;
+
+ dev_info(&fb->dev->dev, "PL%03x rev%u at 0x%08llx\n",
+ amba_part(dev), amba_rev(dev),
+ (unsigned long long)dev->res.start);
+
+ ret = fb->board->setup(fb);
+ if (ret)
+ goto free_fb;
+
+ ret = clcdfb_register(fb);
+ if (ret == 0) {
+ amba_set_drvdata(dev, fb);
+ goto out;
+ }
+
+ fb->board->remove(fb);
+ free_fb:
+ kfree(fb);
+ free_region:
+ amba_release_regions(dev);
+ out:
+ return ret;
+}
+
+static int clcdfb_remove(struct amba_device *dev)
+{
+ struct clcd_fb *fb = amba_get_drvdata(dev);
+
+ clcdfb_disable(fb);
+ unregister_framebuffer(&fb->fb);
+ if (fb->fb.cmap.len)
+ fb_dealloc_cmap(&fb->fb.cmap);
+ iounmap(fb->regs);
+ clk_unprepare(fb->clk);
+ clk_put(fb->clk);
+
+ fb->board->remove(fb);
+
+ kfree(fb);
+
+ amba_release_regions(dev);
+
+ return 0;
+}
+
+static struct amba_id clcdfb_id_table[] = {
+ {
+ .id = 0x00041110,
+ .mask = 0x000ffffe,
+ },
+ { 0, 0 },
+};
+
+MODULE_DEVICE_TABLE(amba, clcdfb_id_table);
+
+static struct amba_driver clcd_driver = {
+ .drv = {
+ .name = "clcd-pl11x",
+ },
+ .probe = clcdfb_probe,
+ .remove = clcdfb_remove,
+ .id_table = clcdfb_id_table,
+};
+
+static int __init amba_clcdfb_init(void)
+{
+ if (fb_get_options("ambafb", NULL))
+ return -ENODEV;
+
+ return amba_driver_register(&clcd_driver);
+}
+
+module_init(amba_clcdfb_init);
+
+static void __exit amba_clcdfb_exit(void)
+{
+ amba_driver_unregister(&clcd_driver);
+}
+
+module_exit(amba_clcdfb_exit);
+
+MODULE_DESCRIPTION("ARM PrimeCell PL110 CLCD core driver");
+MODULE_LICENSE("GPL");
Code Review / kvmfornfv.git / blobdiff