These changes are the raw update to linux-4.4.6-rt14. Kernel sources
[kvmfornfv.git] / kernel / drivers / video / backlight / sky81452-backlight.c
index 052fa1b..d414c7a 100644 (file)
@@ -65,7 +65,7 @@ static int sky81452_bl_update_status(struct backlight_device *bd)
 
        if (brightness > 0) {
                ret = regmap_write(regmap, SKY81452_REG0, brightness - 1);
-               if (IS_ERR_VALUE(ret))
+               if (ret < 0)
                        return ret;
 
                return regmap_update_bits(regmap, SKY81452_REG1, SKY81452_EN,
@@ -87,12 +87,12 @@ static ssize_t sky81452_bl_store_enable(struct device *dev,
        int ret;
 
        ret = kstrtoul(buf, 16, &value);
-       if (IS_ERR_VALUE(ret))
+       if (ret < 0)
                return ret;
 
        ret = regmap_update_bits(regmap, SKY81452_REG1, SKY81452_EN,
                                        value << CTZ(SKY81452_EN));
-       if (IS_ERR_VALUE(ret))
+       if (ret < 0)
                return ret;
 
        return count;
@@ -108,7 +108,7 @@ static ssize_t sky81452_bl_show_open_short(struct device *dev,
 
        reg = !strcmp(attr->attr.name, "open") ? SKY81452_REG5 : SKY81452_REG4;
        ret = regmap_read(regmap, reg, &value);
-       if (IS_ERR_VALUE(ret))
+       if (ret < 0)
                return ret;
 
        if (value & SKY81452_SHRT) {
@@ -136,7 +136,7 @@ static ssize_t sky81452_bl_show_fault(struct device *dev,
        int ret;
 
        ret = regmap_read(regmap, SKY81452_REG4, &value);
-       if (IS_ERR_VALUE(ret))
+       if (ret < 0)
                return ret;
 
        *buf = 0;
@@ -196,7 +196,7 @@ static struct sky81452_bl_platform_data *sky81452_bl_parse_dt(
        pdata->gpio_enable = of_get_gpio(np, 0);
 
        ret = of_property_count_u32_elems(np, "led-sources");
-       if (IS_ERR_VALUE(ret)) {
+       if (ret < 0) {
                pdata->enable = SKY81452_EN >> CTZ(SKY81452_EN);
        } else {
                num_entry = ret;
@@ -205,7 +205,7 @@ static struct sky81452_bl_platform_data *sky81452_bl_parse_dt(
 
                ret = of_property_read_u32_array(np, "led-sources", sources,
                                        num_entry);
-               if (IS_ERR_VALUE(ret)) {
+               if (ret < 0) {
                        dev_err(dev, "led-sources node is invalid.\n");
                        return ERR_PTR(-EINVAL);
                }
@@ -218,12 +218,12 @@ static struct sky81452_bl_platform_data *sky81452_bl_parse_dt(
        ret = of_property_read_u32(np,
                        "skyworks,short-detection-threshold-volt",
                        &pdata->short_detection_threshold);
-       if (IS_ERR_VALUE(ret))
+       if (ret < 0)
                pdata->short_detection_threshold = 7;
 
        ret = of_property_read_u32(np, "skyworks,current-limit-mA",
                        &pdata->boost_current_limit);
-       if (IS_ERR_VALUE(ret))
+       if (ret < 0)
                pdata->boost_current_limit = 2750;
 
        of_node_put(np);
@@ -278,14 +278,14 @@ static int sky81452_bl_probe(struct platform_device *pdev)
        if (gpio_is_valid(pdata->gpio_enable)) {
                ret = devm_gpio_request_one(dev, pdata->gpio_enable,
                                        GPIOF_OUT_INIT_HIGH, "sky81452-en");
-               if (IS_ERR_VALUE(ret)) {
+               if (ret < 0) {
                        dev_err(dev, "failed to request GPIO. err=%d\n", ret);
                        return ret;
                }
        }
 
        ret = sky81452_bl_init_device(regmap, pdata);
-       if (IS_ERR_VALUE(ret)) {
+       if (ret < 0) {
                dev_err(dev, "failed to initialize. err=%d\n", ret);
                return ret;
        }
@@ -302,8 +302,8 @@ static int sky81452_bl_probe(struct platform_device *pdev)
 
        platform_set_drvdata(pdev, bd);
 
-       ret  = sysfs_create_group(&bd->dev.kobj, &sky81452_bl_attr_group);
-       if (IS_ERR_VALUE(ret)) {
+       ret = sysfs_create_group(&bd->dev.kobj, &sky81452_bl_attr_group);
+       if (ret < 0) {
                dev_err(dev, "failed to create attribute. err=%d\n", ret);
                return ret;
        }