Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / drivers / usb / musb / Makefile

diff --git a/kernel/drivers/usb/musb/Makefile b/kernel/drivers/usb/musb/Makefile
new file mode 100644 (file)
index 0000000..ba49501
--- /dev/null
+++ b/kernel/drivers/usb/musb/Makefile
@@ -0,0 +1,36 @@
+#
+# for USB OTG silicon based on Mentor Graphics INVENTRA designs
+#
+
+obj-$(CONFIG_USB_MUSB_HDRC) += musb_hdrc.o
+
+musb_hdrc-y := musb_core.o
+
+musb_hdrc-$(CONFIG_USB_MUSB_HOST)$(CONFIG_USB_MUSB_DUAL_ROLE) += musb_virthub.o musb_host.o
+musb_hdrc-$(CONFIG_USB_MUSB_GADGET)$(CONFIG_USB_MUSB_DUAL_ROLE) += musb_gadget_ep0.o musb_gadget.o
+musb_hdrc-$(CONFIG_DEBUG_FS)                   += musb_debugfs.o
+
+# Hardware Glue Layer
+obj-$(CONFIG_USB_MUSB_OMAP2PLUS)               += omap2430.o
+obj-$(CONFIG_USB_MUSB_AM35X)                   += am35x.o
+obj-$(CONFIG_USB_MUSB_DSPS)                    += musb_dsps.o
+obj-$(CONFIG_USB_MUSB_TUSB6010)                        += tusb6010.o
+obj-$(CONFIG_USB_MUSB_DAVINCI)                 += davinci.o
+obj-$(CONFIG_USB_MUSB_DA8XX)                   += da8xx.o
+obj-$(CONFIG_USB_MUSB_BLACKFIN)                        += blackfin.o
+obj-$(CONFIG_USB_MUSB_UX500)                   += ux500.o
+obj-$(CONFIG_USB_MUSB_JZ4740)                  += jz4740.o
+
+
+obj-$(CONFIG_USB_MUSB_AM335X_CHILD)            += musb_am335x.o
+
+# the kconfig must guarantee that only one of the
+# possible I/O schemes will be enabled at a time ...
+# PIO only, or DMA (several potential schemes).
+# though PIO is always there to back up DMA, and for ep0
+
+musb_hdrc-$(CONFIG_USB_INVENTRA_DMA)           += musbhsdma.o
+musb_hdrc-$(CONFIG_USB_TI_CPPI_DMA)            += cppi_dma.o
+musb_hdrc-$(CONFIG_USB_TUSB_OMAP_DMA)          += tusb6010_omap.o
+musb_hdrc-$(CONFIG_USB_UX500_DMA)              += ux500_dma.o
+musb_hdrc-$(CONFIG_USB_TI_CPPI41_DMA)          += musb_cppi41.o