--- /dev/null
+/*
+ * Driver for SMSC USB3503 USB 2.0 hub controller driver
+ *
+ * Copyright (c) 2012-2013 Dongjin Kim (tobetter@gmail.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/clk.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/usb3503.h>
+#include <linux/regmap.h>
+
+#define USB3503_VIDL 0x00
+#define USB3503_VIDM 0x01
+#define USB3503_PIDL 0x02
+#define USB3503_PIDM 0x03
+#define USB3503_DIDL 0x04
+#define USB3503_DIDM 0x05
+
+#define USB3503_CFG1 0x06
+#define USB3503_SELF_BUS_PWR (1 << 7)
+
+#define USB3503_CFG2 0x07
+#define USB3503_CFG3 0x08
+#define USB3503_NRD 0x09
+
+#define USB3503_PDS 0x0a
+
+#define USB3503_SP_ILOCK 0xe7
+#define USB3503_SPILOCK_CONNECT (1 << 1)
+#define USB3503_SPILOCK_CONFIG (1 << 0)
+
+#define USB3503_CFGP 0xee
+#define USB3503_CLKSUSP (1 << 7)
+
+#define USB3503_RESET 0xff
+
+struct usb3503 {
+ enum usb3503_mode mode;
+ struct regmap *regmap;
+ struct device *dev;
+ struct clk *clk;
+ u8 port_off_mask;
+ int gpio_intn;
+ int gpio_reset;
+ int gpio_connect;
+ bool secondary_ref_clk;
+};
+
+static int usb3503_reset(struct usb3503 *hub, int state)
+{
+ if (!state && gpio_is_valid(hub->gpio_connect))
+ gpio_set_value_cansleep(hub->gpio_connect, 0);
+
+ if (gpio_is_valid(hub->gpio_reset))
+ gpio_set_value_cansleep(hub->gpio_reset, state);
+
+ /* Wait T_HUBINIT == 4ms for hub logic to stabilize */
+ if (state)
+ usleep_range(4000, 10000);
+
+ return 0;
+}
+
+static int usb3503_connect(struct usb3503 *hub)
+{
+ struct device *dev = hub->dev;
+ int err;
+
+ usb3503_reset(hub, 1);
+
+ if (hub->regmap) {
+ /* SP_ILOCK: set connect_n, config_n for config */
+ err = regmap_write(hub->regmap, USB3503_SP_ILOCK,
+ (USB3503_SPILOCK_CONNECT
+ | USB3503_SPILOCK_CONFIG));
+ if (err < 0) {
+ dev_err(dev, "SP_ILOCK failed (%d)\n", err);
+ return err;
+ }
+
+ /* PDS : Set the ports which are disabled in self-powered mode. */
+ if (hub->port_off_mask) {
+ err = regmap_update_bits(hub->regmap, USB3503_PDS,
+ hub->port_off_mask,
+ hub->port_off_mask);
+ if (err < 0) {
+ dev_err(dev, "PDS failed (%d)\n", err);
+ return err;
+ }
+ }
+
+ /* CFG1 : Set SELF_BUS_PWR, this enables self-powered operation. */
+ err = regmap_update_bits(hub->regmap, USB3503_CFG1,
+ USB3503_SELF_BUS_PWR,
+ USB3503_SELF_BUS_PWR);
+ if (err < 0) {
+ dev_err(dev, "CFG1 failed (%d)\n", err);
+ return err;
+ }
+
+ /* SP_LOCK: clear connect_n, config_n for hub connect */
+ err = regmap_update_bits(hub->regmap, USB3503_SP_ILOCK,
+ (USB3503_SPILOCK_CONNECT
+ | USB3503_SPILOCK_CONFIG), 0);
+ if (err < 0) {
+ dev_err(dev, "SP_ILOCK failed (%d)\n", err);
+ return err;
+ }
+ }
+
+ if (gpio_is_valid(hub->gpio_connect))
+ gpio_set_value_cansleep(hub->gpio_connect, 1);
+
+ hub->mode = USB3503_MODE_HUB;
+ dev_info(dev, "switched to HUB mode\n");
+
+ return 0;
+}
+
+static int usb3503_switch_mode(struct usb3503 *hub, enum usb3503_mode mode)
+{
+ struct device *dev = hub->dev;
+ int err = 0;
+
+ switch (mode) {
+ case USB3503_MODE_HUB:
+ err = usb3503_connect(hub);
+ break;
+
+ case USB3503_MODE_STANDBY:
+ usb3503_reset(hub, 0);
+ dev_info(dev, "switched to STANDBY mode\n");
+ break;
+
+ default:
+ dev_err(dev, "unknown mode is requested\n");
+ err = -EINVAL;
+ break;
+ }
+
+ return err;
+}
+
+static const struct regmap_config usb3503_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .max_register = USB3503_RESET,
+};
+
+static int usb3503_probe(struct usb3503 *hub)
+{
+ struct device *dev = hub->dev;
+ struct usb3503_platform_data *pdata = dev_get_platdata(dev);
+ struct device_node *np = dev->of_node;
+ int err;
+ u32 mode = USB3503_MODE_HUB;
+ const u32 *property;
+ int len;
+
+ if (pdata) {
+ hub->port_off_mask = pdata->port_off_mask;
+ hub->gpio_intn = pdata->gpio_intn;
+ hub->gpio_connect = pdata->gpio_connect;
+ hub->gpio_reset = pdata->gpio_reset;
+ hub->mode = pdata->initial_mode;
+ } else if (np) {
+ struct clk *clk;
+ u32 rate = 0;
+ hub->port_off_mask = 0;
+
+ if (!of_property_read_u32(np, "refclk-frequency", &rate)) {
+ switch (rate) {
+ case 38400000:
+ case 26000000:
+ case 19200000:
+ case 12000000:
+ hub->secondary_ref_clk = 0;
+ break;
+ case 24000000:
+ case 27000000:
+ case 25000000:
+ case 50000000:
+ hub->secondary_ref_clk = 1;
+ break;
+ default:
+ dev_err(dev,
+ "unsupported reference clock rate (%d)\n",
+ (int) rate);
+ return -EINVAL;
+ }
+ }
+
+ clk = devm_clk_get(dev, "refclk");
+ if (IS_ERR(clk) && PTR_ERR(clk) != -ENOENT) {
+ dev_err(dev, "unable to request refclk (%ld)\n",
+ PTR_ERR(clk));
+ return PTR_ERR(clk);
+ }
+
+ if (!IS_ERR(clk)) {
+ hub->clk = clk;
+
+ if (rate != 0) {
+ err = clk_set_rate(hub->clk, rate);
+ if (err) {
+ dev_err(dev,
+ "unable to set reference clock rate to %d\n",
+ (int) rate);
+ return err;
+ }
+ }
+
+ err = clk_prepare_enable(hub->clk);
+ if (err) {
+ dev_err(dev,
+ "unable to enable reference clock\n");
+ return err;
+ }
+ }
+
+ property = of_get_property(np, "disabled-ports", &len);
+ if (property && (len / sizeof(u32)) > 0) {
+ int i;
+ for (i = 0; i < len / sizeof(u32); i++) {
+ u32 port = be32_to_cpu(property[i]);
+ if ((1 <= port) && (port <= 3))
+ hub->port_off_mask |= (1 << port);
+ }
+ }
+
+ hub->gpio_intn = of_get_named_gpio(np, "intn-gpios", 0);
+ if (hub->gpio_intn == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ hub->gpio_connect = of_get_named_gpio(np, "connect-gpios", 0);
+ if (hub->gpio_connect == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ hub->gpio_reset = of_get_named_gpio(np, "reset-gpios", 0);
+ if (hub->gpio_reset == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ of_property_read_u32(np, "initial-mode", &mode);
+ hub->mode = mode;
+ }
+
+ if (hub->port_off_mask && !hub->regmap)
+ dev_err(dev, "Ports disabled with no control interface\n");
+
+ if (gpio_is_valid(hub->gpio_intn)) {
+ int val = hub->secondary_ref_clk ? GPIOF_OUT_INIT_LOW :
+ GPIOF_OUT_INIT_HIGH;
+ err = devm_gpio_request_one(dev, hub->gpio_intn, val,
+ "usb3503 intn");
+ if (err) {
+ dev_err(dev,
+ "unable to request GPIO %d as interrupt pin (%d)\n",
+ hub->gpio_intn, err);
+ return err;
+ }
+ }
+
+ if (gpio_is_valid(hub->gpio_connect)) {
+ err = devm_gpio_request_one(dev, hub->gpio_connect,
+ GPIOF_OUT_INIT_LOW, "usb3503 connect");
+ if (err) {
+ dev_err(dev,
+ "unable to request GPIO %d as connect pin (%d)\n",
+ hub->gpio_connect, err);
+ return err;
+ }
+ }
+
+ if (gpio_is_valid(hub->gpio_reset)) {
+ err = devm_gpio_request_one(dev, hub->gpio_reset,
+ GPIOF_OUT_INIT_LOW, "usb3503 reset");
+ if (err) {
+ dev_err(dev,
+ "unable to request GPIO %d as reset pin (%d)\n",
+ hub->gpio_reset, err);
+ return err;
+ }
+ }
+
+ usb3503_switch_mode(hub, hub->mode);
+
+ dev_info(dev, "%s: probed in %s mode\n", __func__,
+ (hub->mode == USB3503_MODE_HUB) ? "hub" : "standby");
+
+ return 0;
+}
+
+static int usb3503_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct usb3503 *hub;
+ int err;
+
+ hub = devm_kzalloc(&i2c->dev, sizeof(struct usb3503), GFP_KERNEL);
+ if (!hub)
+ return -ENOMEM;
+
+ i2c_set_clientdata(i2c, hub);
+ hub->regmap = devm_regmap_init_i2c(i2c, &usb3503_regmap_config);
+ if (IS_ERR(hub->regmap)) {
+ err = PTR_ERR(hub->regmap);
+ dev_err(&i2c->dev, "Failed to initialise regmap: %d\n", err);
+ return err;
+ }
+ hub->dev = &i2c->dev;
+
+ return usb3503_probe(hub);
+}
+
+static int usb3503_platform_probe(struct platform_device *pdev)
+{
+ struct usb3503 *hub;
+
+ hub = devm_kzalloc(&pdev->dev, sizeof(struct usb3503), GFP_KERNEL);
+ if (!hub)
+ return -ENOMEM;
+ hub->dev = &pdev->dev;
+
+ return usb3503_probe(hub);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int usb3503_i2c_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct usb3503 *hub = i2c_get_clientdata(client);
+
+ usb3503_switch_mode(hub, USB3503_MODE_STANDBY);
+
+ if (hub->clk)
+ clk_disable_unprepare(hub->clk);
+
+ return 0;
+}
+
+static int usb3503_i2c_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct usb3503 *hub = i2c_get_clientdata(client);
+
+ if (hub->clk)
+ clk_prepare_enable(hub->clk);
+
+ usb3503_switch_mode(hub, hub->mode);
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(usb3503_i2c_pm_ops, usb3503_i2c_suspend,
+ usb3503_i2c_resume);
+
+static const struct i2c_device_id usb3503_id[] = {
+ { USB3503_I2C_NAME, 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, usb3503_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id usb3503_of_match[] = {
+ { .compatible = "smsc,usb3503", },
+ { .compatible = "smsc,usb3503a", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, usb3503_of_match);
+#endif
+
+static struct i2c_driver usb3503_i2c_driver = {
+ .driver = {
+ .name = USB3503_I2C_NAME,
+ .pm = &usb3503_i2c_pm_ops,
+ .of_match_table = of_match_ptr(usb3503_of_match),
+ },
+ .probe = usb3503_i2c_probe,
+ .id_table = usb3503_id,
+};
+
+static struct platform_driver usb3503_platform_driver = {
+ .driver = {
+ .name = USB3503_I2C_NAME,
+ .of_match_table = of_match_ptr(usb3503_of_match),
+ },
+ .probe = usb3503_platform_probe,
+};
+
+static int __init usb3503_init(void)
+{
+ int err;
+
+ err = i2c_register_driver(THIS_MODULE, &usb3503_i2c_driver);
+ if (err != 0)
+ pr_err("usb3503: Failed to register I2C driver: %d\n", err);
+
+ err = platform_driver_register(&usb3503_platform_driver);
+ if (err != 0)
+ pr_err("usb3503: Failed to register platform driver: %d\n",
+ err);
+
+ return 0;
+}
+module_init(usb3503_init);
+
+static void __exit usb3503_exit(void)
+{
+ platform_driver_unregister(&usb3503_platform_driver);
+ i2c_del_driver(&usb3503_i2c_driver);
+}
+module_exit(usb3503_exit);
+
+MODULE_AUTHOR("Dongjin Kim <tobetter@gmail.com>");
+MODULE_DESCRIPTION("USB3503 USB HUB driver");
+MODULE_LICENSE("GPL");
Code Review / kvmfornfv.git / blobdiff