--- /dev/null
+/*
+ * OHCI HCD (Host Controller Driver) for USB.
+ *
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
+ *
+ * This file is licenced under the GPL.
+ */
+
+/*
+ * __hc32 and __hc16 are "Host Controller" types, they may be equivalent to
+ * __leXX (normally) or __beXX (given OHCI_BIG_ENDIAN), depending on the
+ * host controller implementation.
+ */
+typedef __u32 __bitwise __hc32;
+typedef __u16 __bitwise __hc16;
+
+/*
+ * OHCI Endpoint Descriptor (ED) ... holds TD queue
+ * See OHCI spec, section 4.2
+ *
+ * This is a "Queue Head" for those transfers, which is why
+ * both EHCI and UHCI call similar structures a "QH".
+ */
+struct ed {
+ /* first fields are hardware-specified */
+ __hc32 hwINFO; /* endpoint config bitmap */
+ /* info bits defined by hcd */
+#define ED_DEQUEUE (1 << 27)
+ /* info bits defined by the hardware */
+#define ED_ISO (1 << 15)
+#define ED_SKIP (1 << 14)
+#define ED_LOWSPEED (1 << 13)
+#define ED_OUT (0x01 << 11)
+#define ED_IN (0x02 << 11)
+ __hc32 hwTailP; /* tail of TD list */
+ __hc32 hwHeadP; /* head of TD list (hc r/w) */
+#define ED_C (0x02) /* toggle carry */
+#define ED_H (0x01) /* halted */
+ __hc32 hwNextED; /* next ED in list */
+
+ /* rest are purely for the driver's use */
+ dma_addr_t dma; /* addr of ED */
+ struct td *dummy; /* next TD to activate */
+
+ /* host's view of schedule */
+ struct ed *ed_next; /* on schedule or rm_list */
+ struct ed *ed_prev; /* for non-interrupt EDs */
+ struct list_head td_list; /* "shadow list" of our TDs */
+ struct list_head in_use_list;
+
+ /* create --> IDLE --> OPER --> ... --> IDLE --> destroy
+ * usually: OPER --> UNLINK --> (IDLE | OPER) --> ...
+ */
+ u8 state; /* ED_{IDLE,UNLINK,OPER} */
+#define ED_IDLE 0x00 /* NOT linked to HC */
+#define ED_UNLINK 0x01 /* being unlinked from hc */
+#define ED_OPER 0x02 /* IS linked to hc */
+
+ u8 type; /* PIPE_{BULK,...} */
+
+ /* periodic scheduling params (for intr and iso) */
+ u8 branch;
+ u16 interval;
+ u16 load;
+ u16 last_iso; /* iso only */
+
+ /* HC may see EDs on rm_list until next frame (frame_no == tick) */
+ u16 tick;
+
+ /* Detect TDs not added to the done queue */
+ unsigned takeback_wdh_cnt;
+ struct td *pending_td;
+#define OKAY_TO_TAKEBACK(ohci, ed) \
+ ((int) (ohci->wdh_cnt - ed->takeback_wdh_cnt) >= 0)
+
+} __attribute__ ((aligned(16)));
+
+#define ED_MASK ((u32)~0x0f) /* strip hw status in low addr bits */
+
+
+/*
+ * OHCI Transfer Descriptor (TD) ... one per transfer segment
+ * See OHCI spec, sections 4.3.1 (general = control/bulk/interrupt)
+ * and 4.3.2 (iso)
+ */
+struct td {
+ /* first fields are hardware-specified */
+ __hc32 hwINFO; /* transfer info bitmask */
+
+ /* hwINFO bits for both general and iso tds: */
+#define TD_CC 0xf0000000 /* condition code */
+#define TD_CC_GET(td_p) ((td_p >>28) & 0x0f)
+//#define TD_CC_SET(td_p, cc) (td_p) = ((td_p) & 0x0fffffff) | (((cc) & 0x0f) << 28)
+#define TD_DI 0x00E00000 /* frames before interrupt */
+#define TD_DI_SET(X) (((X) & 0x07)<< 21)
+ /* these two bits are available for definition/use by HCDs in both
+ * general and iso tds ... others are available for only one type
+ */
+#define TD_DONE 0x00020000 /* retired to donelist */
+#define TD_ISO 0x00010000 /* copy of ED_ISO */
+
+ /* hwINFO bits for general tds: */
+#define TD_EC 0x0C000000 /* error count */
+#define TD_T 0x03000000 /* data toggle state */
+#define TD_T_DATA0 0x02000000 /* DATA0 */
+#define TD_T_DATA1 0x03000000 /* DATA1 */
+#define TD_T_TOGGLE 0x00000000 /* uses ED_C */
+#define TD_DP 0x00180000 /* direction/pid */
+#define TD_DP_SETUP 0x00000000 /* SETUP pid */
+#define TD_DP_IN 0x00100000 /* IN pid */
+#define TD_DP_OUT 0x00080000 /* OUT pid */
+ /* 0x00180000 rsvd */
+#define TD_R 0x00040000 /* round: short packets OK? */
+
+ /* (no hwINFO #defines yet for iso tds) */
+
+ __hc32 hwCBP; /* Current Buffer Pointer (or 0) */
+ __hc32 hwNextTD; /* Next TD Pointer */
+ __hc32 hwBE; /* Memory Buffer End Pointer */
+
+ /* PSW is only for ISO. Only 1 PSW entry is used, but on
+ * big-endian PPC hardware that's the second entry.
+ */
+#define MAXPSW 2
+ __hc16 hwPSW [MAXPSW];
+
+ /* rest are purely for the driver's use */
+ __u8 index;
+ struct ed *ed;
+ struct td *td_hash; /* dma-->td hashtable */
+ struct td *next_dl_td;
+ struct urb *urb;
+
+ dma_addr_t td_dma; /* addr of this TD */
+ dma_addr_t data_dma; /* addr of data it points to */
+
+ struct list_head td_list; /* "shadow list", TDs on same ED */
+} __attribute__ ((aligned(32))); /* c/b/i need 16; only iso needs 32 */
+
+#define TD_MASK ((u32)~0x1f) /* strip hw status in low addr bits */
+
+/*
+ * Hardware transfer status codes -- CC from td->hwINFO or td->hwPSW
+ */
+#define TD_CC_NOERROR 0x00
+#define TD_CC_CRC 0x01
+#define TD_CC_BITSTUFFING 0x02
+#define TD_CC_DATATOGGLEM 0x03
+#define TD_CC_STALL 0x04
+#define TD_DEVNOTRESP 0x05
+#define TD_PIDCHECKFAIL 0x06
+#define TD_UNEXPECTEDPID 0x07
+#define TD_DATAOVERRUN 0x08
+#define TD_DATAUNDERRUN 0x09
+ /* 0x0A, 0x0B reserved for hardware */
+#define TD_BUFFEROVERRUN 0x0C
+#define TD_BUFFERUNDERRUN 0x0D
+ /* 0x0E, 0x0F reserved for HCD */
+#define TD_NOTACCESSED 0x0F
+
+
+/* map OHCI TD status codes (CC) to errno values */
+static const int cc_to_error [16] = {
+ /* No Error */ 0,
+ /* CRC Error */ -EILSEQ,
+ /* Bit Stuff */ -EPROTO,
+ /* Data Togg */ -EILSEQ,
+ /* Stall */ -EPIPE,
+ /* DevNotResp */ -ETIME,
+ /* PIDCheck */ -EPROTO,
+ /* UnExpPID */ -EPROTO,
+ /* DataOver */ -EOVERFLOW,
+ /* DataUnder */ -EREMOTEIO,
+ /* (for hw) */ -EIO,
+ /* (for hw) */ -EIO,
+ /* BufferOver */ -ECOMM,
+ /* BuffUnder */ -ENOSR,
+ /* (for HCD) */ -EALREADY,
+ /* (for HCD) */ -EALREADY
+};
+
+
+/*
+ * The HCCA (Host Controller Communications Area) is a 256 byte
+ * structure defined section 4.4.1 of the OHCI spec. The HC is
+ * told the base address of it. It must be 256-byte aligned.
+ */
+struct ohci_hcca {
+#define NUM_INTS 32
+ __hc32 int_table [NUM_INTS]; /* periodic schedule */
+
+ /*
+ * OHCI defines u16 frame_no, followed by u16 zero pad.
+ * Since some processors can't do 16 bit bus accesses,
+ * portable access must be a 32 bits wide.
+ */
+ __hc32 frame_no; /* current frame number */
+ __hc32 done_head; /* info returned for an interrupt */
+ u8 reserved_for_hc [116];
+ u8 what [4]; /* spec only identifies 252 bytes :) */
+} __attribute__ ((aligned(256)));
+
+/*
+ * This is the structure of the OHCI controller's memory mapped I/O region.
+ * You must use readl() and writel() (in <asm/io.h>) to access these fields!!
+ * Layout is in section 7 (and appendix B) of the spec.
+ */
+struct ohci_regs {
+ /* control and status registers (section 7.1) */
+ __hc32 revision;
+ __hc32 control;
+ __hc32 cmdstatus;
+ __hc32 intrstatus;
+ __hc32 intrenable;
+ __hc32 intrdisable;
+
+ /* memory pointers (section 7.2) */
+ __hc32 hcca;
+ __hc32 ed_periodcurrent;
+ __hc32 ed_controlhead;
+ __hc32 ed_controlcurrent;
+ __hc32 ed_bulkhead;
+ __hc32 ed_bulkcurrent;
+ __hc32 donehead;
+
+ /* frame counters (section 7.3) */
+ __hc32 fminterval;
+ __hc32 fmremaining;
+ __hc32 fmnumber;
+ __hc32 periodicstart;
+ __hc32 lsthresh;
+
+ /* Root hub ports (section 7.4) */
+ struct ohci_roothub_regs {
+ __hc32 a;
+ __hc32 b;
+ __hc32 status;
+#define MAX_ROOT_PORTS 15 /* maximum OHCI root hub ports (RH_A_NDP) */
+ __hc32 portstatus [MAX_ROOT_PORTS];
+ } roothub;
+
+ /* and optional "legacy support" registers (appendix B) at 0x0100 */
+
+} __attribute__ ((aligned(32)));
+
+
+/* OHCI CONTROL AND STATUS REGISTER MASKS */
+
+/*
+ * HcControl (control) register masks
+ */
+#define OHCI_CTRL_CBSR (3 << 0) /* control/bulk service ratio */
+#define OHCI_CTRL_PLE (1 << 2) /* periodic list enable */
+#define OHCI_CTRL_IE (1 << 3) /* isochronous enable */
+#define OHCI_CTRL_CLE (1 << 4) /* control list enable */
+#define OHCI_CTRL_BLE (1 << 5) /* bulk list enable */
+#define OHCI_CTRL_HCFS (3 << 6) /* host controller functional state */
+#define OHCI_CTRL_IR (1 << 8) /* interrupt routing */
+#define OHCI_CTRL_RWC (1 << 9) /* remote wakeup connected */
+#define OHCI_CTRL_RWE (1 << 10) /* remote wakeup enable */
+
+/* pre-shifted values for HCFS */
+# define OHCI_USB_RESET (0 << 6)
+# define OHCI_USB_RESUME (1 << 6)
+# define OHCI_USB_OPER (2 << 6)
+# define OHCI_USB_SUSPEND (3 << 6)
+
+/*
+ * HcCommandStatus (cmdstatus) register masks
+ */
+#define OHCI_HCR (1 << 0) /* host controller reset */
+#define OHCI_CLF (1 << 1) /* control list filled */
+#define OHCI_BLF (1 << 2) /* bulk list filled */
+#define OHCI_OCR (1 << 3) /* ownership change request */
+#define OHCI_SOC (3 << 16) /* scheduling overrun count */
+
+/*
+ * masks used with interrupt registers:
+ * HcInterruptStatus (intrstatus)
+ * HcInterruptEnable (intrenable)
+ * HcInterruptDisable (intrdisable)
+ */
+#define OHCI_INTR_SO (1 << 0) /* scheduling overrun */
+#define OHCI_INTR_WDH (1 << 1) /* writeback of done_head */
+#define OHCI_INTR_SF (1 << 2) /* start frame */
+#define OHCI_INTR_RD (1 << 3) /* resume detect */
+#define OHCI_INTR_UE (1 << 4) /* unrecoverable error */
+#define OHCI_INTR_FNO (1 << 5) /* frame number overflow */
+#define OHCI_INTR_RHSC (1 << 6) /* root hub status change */
+#define OHCI_INTR_OC (1 << 30) /* ownership change */
+#define OHCI_INTR_MIE (1 << 31) /* master interrupt enable */
+
+
+/* OHCI ROOT HUB REGISTER MASKS */
+
+/* roothub.portstatus [i] bits */
+#define RH_PS_CCS 0x00000001 /* current connect status */
+#define RH_PS_PES 0x00000002 /* port enable status*/
+#define RH_PS_PSS 0x00000004 /* port suspend status */
+#define RH_PS_POCI 0x00000008 /* port over current indicator */
+#define RH_PS_PRS 0x00000010 /* port reset status */
+#define RH_PS_PPS 0x00000100 /* port power status */
+#define RH_PS_LSDA 0x00000200 /* low speed device attached */
+#define RH_PS_CSC 0x00010000 /* connect status change */
+#define RH_PS_PESC 0x00020000 /* port enable status change */
+#define RH_PS_PSSC 0x00040000 /* port suspend status change */
+#define RH_PS_OCIC 0x00080000 /* over current indicator change */
+#define RH_PS_PRSC 0x00100000 /* port reset status change */
+
+/* roothub.status bits */
+#define RH_HS_LPS 0x00000001 /* local power status */
+#define RH_HS_OCI 0x00000002 /* over current indicator */
+#define RH_HS_DRWE 0x00008000 /* device remote wakeup enable */
+#define RH_HS_LPSC 0x00010000 /* local power status change */
+#define RH_HS_OCIC 0x00020000 /* over current indicator change */
+#define RH_HS_CRWE 0x80000000 /* clear remote wakeup enable */
+
+/* roothub.b masks */
+#define RH_B_DR 0x0000ffff /* device removable flags */
+#define RH_B_PPCM 0xffff0000 /* port power control mask */
+
+/* roothub.a masks */
+#define RH_A_NDP (0xff << 0) /* number of downstream ports */
+#define RH_A_PSM (1 << 8) /* power switching mode */
+#define RH_A_NPS (1 << 9) /* no power switching */
+#define RH_A_DT (1 << 10) /* device type (mbz) */
+#define RH_A_OCPM (1 << 11) /* over current protection mode */
+#define RH_A_NOCP (1 << 12) /* no over current protection */
+#define RH_A_POTPGT (0xff << 24) /* power on to power good time */
+
+
+/* hcd-private per-urb state */
+typedef struct urb_priv {
+ struct ed *ed;
+ u16 length; // # tds in this request
+ u16 td_cnt; // tds already serviced
+ struct list_head pending;
+ struct td *td [0]; // all TDs in this request
+
+} urb_priv_t;
+
+#define TD_HASH_SIZE 64 /* power'o'two */
+// sizeof (struct td) ~= 64 == 2^6 ...
+#define TD_HASH_FUNC(td_dma) ((td_dma ^ (td_dma >> 6)) % TD_HASH_SIZE)
+
+
+/*
+ * This is the full ohci controller description
+ *
+ * Note how the "proper" USB information is just
+ * a subset of what the full implementation needs. (Linus)
+ */
+
+enum ohci_rh_state {
+ OHCI_RH_HALTED,
+ OHCI_RH_SUSPENDED,
+ OHCI_RH_RUNNING
+};
+
+struct ohci_hcd {
+ spinlock_t lock;
+
+ /*
+ * I/O memory used to communicate with the HC (dma-consistent)
+ */
+ struct ohci_regs __iomem *regs;
+
+ /*
+ * main memory used to communicate with the HC (dma-consistent).
+ * hcd adds to schedule for a live hc any time, but removals finish
+ * only at the start of the next frame.
+ */
+ struct ohci_hcca *hcca;
+ dma_addr_t hcca_dma;
+
+ struct ed *ed_rm_list; /* to be removed */
+
+ struct ed *ed_bulktail; /* last in bulk list */
+ struct ed *ed_controltail; /* last in ctrl list */
+ struct ed *periodic [NUM_INTS]; /* shadow int_table */
+
+ void (*start_hnp)(struct ohci_hcd *ohci);
+
+ /*
+ * memory management for queue data structures
+ */
+ struct dma_pool *td_cache;
+ struct dma_pool *ed_cache;
+ struct td *td_hash [TD_HASH_SIZE];
+ struct td *dl_start, *dl_end; /* the done list */
+ struct list_head pending;
+ struct list_head eds_in_use; /* all EDs with at least 1 TD */
+
+ /*
+ * driver state
+ */
+ enum ohci_rh_state rh_state;
+ int num_ports;
+ int load [NUM_INTS];
+ u32 hc_control; /* copy of hc control reg */
+ unsigned long next_statechange; /* suspend/resume */
+ u32 fminterval; /* saved register */
+ unsigned autostop:1; /* rh auto stopping/stopped */
+ unsigned working:1;
+ unsigned restart_work:1;
+
+ unsigned long flags; /* for HC bugs */
+#define OHCI_QUIRK_AMD756 0x01 /* erratum #4 */
+#define OHCI_QUIRK_SUPERIO 0x02 /* natsemi */
+#define OHCI_QUIRK_INITRESET 0x04 /* SiS, OPTi, ... */
+#define OHCI_QUIRK_BE_DESC 0x08 /* BE descriptors */
+#define OHCI_QUIRK_BE_MMIO 0x10 /* BE registers */
+#define OHCI_QUIRK_ZFMICRO 0x20 /* Compaq ZFMicro chipset*/
+#define OHCI_QUIRK_NEC 0x40 /* lost interrupts */
+#define OHCI_QUIRK_FRAME_NO 0x80 /* no big endian frame_no shift */
+#define OHCI_QUIRK_HUB_POWER 0x100 /* distrust firmware power/oc setup */
+#define OHCI_QUIRK_AMD_PLL 0x200 /* AMD PLL quirk*/
+#define OHCI_QUIRK_AMD_PREFETCH 0x400 /* pre-fetch for ISO transfer */
+#define OHCI_QUIRK_GLOBAL_SUSPEND 0x800 /* must suspend ports */
+
+ // there are also chip quirks/bugs in init logic
+
+ unsigned prev_frame_no;
+ unsigned wdh_cnt, prev_wdh_cnt;
+ u32 prev_donehead;
+ struct timer_list io_watchdog;
+
+ struct work_struct nec_work; /* Worker for NEC quirk */
+
+ struct dentry *debug_dir;
+ struct dentry *debug_async;
+ struct dentry *debug_periodic;
+ struct dentry *debug_registers;
+
+ /* platform-specific data -- must come last */
+ unsigned long priv[0] __aligned(sizeof(s64));
+
+};
+
+#ifdef CONFIG_PCI
+static inline int quirk_nec(struct ohci_hcd *ohci)
+{
+ return ohci->flags & OHCI_QUIRK_NEC;
+}
+static inline int quirk_zfmicro(struct ohci_hcd *ohci)
+{
+ return ohci->flags & OHCI_QUIRK_ZFMICRO;
+}
+static inline int quirk_amdiso(struct ohci_hcd *ohci)
+{
+ return ohci->flags & OHCI_QUIRK_AMD_PLL;
+}
+static inline int quirk_amdprefetch(struct ohci_hcd *ohci)
+{
+ return ohci->flags & OHCI_QUIRK_AMD_PREFETCH;
+}
+#else
+static inline int quirk_nec(struct ohci_hcd *ohci)
+{
+ return 0;
+}
+static inline int quirk_zfmicro(struct ohci_hcd *ohci)
+{
+ return 0;
+}
+static inline int quirk_amdiso(struct ohci_hcd *ohci)
+{
+ return 0;
+}
+static inline int quirk_amdprefetch(struct ohci_hcd *ohci)
+{
+ return 0;
+}
+#endif
+
+/* convert between an hcd pointer and the corresponding ohci_hcd */
+static inline struct ohci_hcd *hcd_to_ohci (struct usb_hcd *hcd)
+{
+ return (struct ohci_hcd *) (hcd->hcd_priv);
+}
+static inline struct usb_hcd *ohci_to_hcd (const struct ohci_hcd *ohci)
+{
+ return container_of ((void *) ohci, struct usb_hcd, hcd_priv);
+}
+
+/*-------------------------------------------------------------------------*/
+
+#define ohci_dbg(ohci, fmt, args...) \
+ dev_dbg (ohci_to_hcd(ohci)->self.controller , fmt , ## args )
+#define ohci_err(ohci, fmt, args...) \
+ dev_err (ohci_to_hcd(ohci)->self.controller , fmt , ## args )
+#define ohci_info(ohci, fmt, args...) \
+ dev_info (ohci_to_hcd(ohci)->self.controller , fmt , ## args )
+#define ohci_warn(ohci, fmt, args...) \
+ dev_warn (ohci_to_hcd(ohci)->self.controller , fmt , ## args )
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * While most USB host controllers implement their registers and
+ * in-memory communication descriptors in little-endian format,
+ * a minority (notably the IBM STB04XXX and the Motorola MPC5200
+ * processors) implement them in big endian format.
+ *
+ * In addition some more exotic implementations like the Toshiba
+ * Spider (aka SCC) cell southbridge are "mixed" endian, that is,
+ * they have a different endianness for registers vs. in-memory
+ * descriptors.
+ *
+ * This attempts to support either format at compile time without a
+ * runtime penalty, or both formats with the additional overhead
+ * of checking a flag bit.
+ *
+ * That leads to some tricky Kconfig rules howevber. There are
+ * different defaults based on some arch/ppc platforms, though
+ * the basic rules are:
+ *
+ * Controller type Kconfig options needed
+ * --------------- ----------------------
+ * little endian CONFIG_USB_OHCI_LITTLE_ENDIAN
+ *
+ * fully big endian CONFIG_USB_OHCI_BIG_ENDIAN_DESC _and_
+ * CONFIG_USB_OHCI_BIG_ENDIAN_MMIO
+ *
+ * mixed endian CONFIG_USB_OHCI_LITTLE_ENDIAN _and_
+ * CONFIG_USB_OHCI_BIG_ENDIAN_{MMIO,DESC}
+ *
+ * (If you have a mixed endian controller, you -must- also define
+ * CONFIG_USB_OHCI_LITTLE_ENDIAN or things will not work when building
+ * both your mixed endian and a fully big endian controller support in
+ * the same kernel image).
+ */
+
+#ifdef CONFIG_USB_OHCI_BIG_ENDIAN_DESC
+#ifdef CONFIG_USB_OHCI_LITTLE_ENDIAN
+#define big_endian_desc(ohci) (ohci->flags & OHCI_QUIRK_BE_DESC)
+#else
+#define big_endian_desc(ohci) 1 /* only big endian */
+#endif
+#else
+#define big_endian_desc(ohci) 0 /* only little endian */
+#endif
+
+#ifdef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO
+#ifdef CONFIG_USB_OHCI_LITTLE_ENDIAN
+#define big_endian_mmio(ohci) (ohci->flags & OHCI_QUIRK_BE_MMIO)
+#else
+#define big_endian_mmio(ohci) 1 /* only big endian */
+#endif
+#else
+#define big_endian_mmio(ohci) 0 /* only little endian */
+#endif
+
+/*
+ * Big-endian read/write functions are arch-specific.
+ * Other arches can be added if/when they're needed.
+ *
+ */
+static inline unsigned int _ohci_readl (const struct ohci_hcd *ohci,
+ __hc32 __iomem * regs)
+{
+#ifdef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO
+ return big_endian_mmio(ohci) ?
+ readl_be (regs) :
+ readl (regs);
+#else
+ return readl (regs);
+#endif
+}
+
+static inline void _ohci_writel (const struct ohci_hcd *ohci,
+ const unsigned int val, __hc32 __iomem *regs)
+{
+#ifdef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO
+ big_endian_mmio(ohci) ?
+ writel_be (val, regs) :
+ writel (val, regs);
+#else
+ writel (val, regs);
+#endif
+}
+
+#define ohci_readl(o,r) _ohci_readl(o,r)
+#define ohci_writel(o,v,r) _ohci_writel(o,v,r)
+
+
+/*-------------------------------------------------------------------------*/
+
+/* cpu to ohci */
+static inline __hc16 cpu_to_hc16 (const struct ohci_hcd *ohci, const u16 x)
+{
+ return big_endian_desc(ohci) ?
+ (__force __hc16)cpu_to_be16(x) :
+ (__force __hc16)cpu_to_le16(x);
+}
+
+static inline __hc16 cpu_to_hc16p (const struct ohci_hcd *ohci, const u16 *x)
+{
+ return big_endian_desc(ohci) ?
+ cpu_to_be16p(x) :
+ cpu_to_le16p(x);
+}
+
+static inline __hc32 cpu_to_hc32 (const struct ohci_hcd *ohci, const u32 x)
+{
+ return big_endian_desc(ohci) ?
+ (__force __hc32)cpu_to_be32(x) :
+ (__force __hc32)cpu_to_le32(x);
+}
+
+static inline __hc32 cpu_to_hc32p (const struct ohci_hcd *ohci, const u32 *x)
+{
+ return big_endian_desc(ohci) ?
+ cpu_to_be32p(x) :
+ cpu_to_le32p(x);
+}
+
+/* ohci to cpu */
+static inline u16 hc16_to_cpu (const struct ohci_hcd *ohci, const __hc16 x)
+{
+ return big_endian_desc(ohci) ?
+ be16_to_cpu((__force __be16)x) :
+ le16_to_cpu((__force __le16)x);
+}
+
+static inline u16 hc16_to_cpup (const struct ohci_hcd *ohci, const __hc16 *x)
+{
+ return big_endian_desc(ohci) ?
+ be16_to_cpup((__force __be16 *)x) :
+ le16_to_cpup((__force __le16 *)x);
+}
+
+static inline u32 hc32_to_cpu (const struct ohci_hcd *ohci, const __hc32 x)
+{
+ return big_endian_desc(ohci) ?
+ be32_to_cpu((__force __be32)x) :
+ le32_to_cpu((__force __le32)x);
+}
+
+static inline u32 hc32_to_cpup (const struct ohci_hcd *ohci, const __hc32 *x)
+{
+ return big_endian_desc(ohci) ?
+ be32_to_cpup((__force __be32 *)x) :
+ le32_to_cpup((__force __le32 *)x);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * The HCCA frame number is 16 bits, but is accessed as 32 bits since not all
+ * hardware handles 16 bit reads. Depending on the SoC implementation, the
+ * frame number can wind up in either bits [31:16] (default) or
+ * [15:0] (OHCI_QUIRK_FRAME_NO) on big endian hosts.
+ *
+ * Somewhat similarly, the 16-bit PSW fields in a transfer descriptor are
+ * reordered on BE.
+ */
+
+static inline u16 ohci_frame_no(const struct ohci_hcd *ohci)
+{
+ u32 tmp;
+ if (big_endian_desc(ohci)) {
+ tmp = be32_to_cpup((__force __be32 *)&ohci->hcca->frame_no);
+ if (!(ohci->flags & OHCI_QUIRK_FRAME_NO))
+ tmp >>= 16;
+ } else
+ tmp = le32_to_cpup((__force __le32 *)&ohci->hcca->frame_no);
+
+ return (u16)tmp;
+}
+
+static inline __hc16 *ohci_hwPSWp(const struct ohci_hcd *ohci,
+ const struct td *td, int index)
+{
+ return (__hc16 *)(big_endian_desc(ohci) ?
+ &td->hwPSW[index ^ 1] : &td->hwPSW[index]);
+}
+
+static inline u16 ohci_hwPSW(const struct ohci_hcd *ohci,
+ const struct td *td, int index)
+{
+ return hc16_to_cpup(ohci, ohci_hwPSWp(ohci, td, index));
+}
+
+/*-------------------------------------------------------------------------*/
+
+#define FI 0x2edf /* 12000 bits per frame (-1) */
+#define FSMP(fi) (0x7fff & ((6 * ((fi) - 210)) / 7))
+#define FIT (1 << 31)
+#define LSTHRESH 0x628 /* lowspeed bit threshold */
+
+static inline void periodic_reinit (struct ohci_hcd *ohci)
+{
+ u32 fi = ohci->fminterval & 0x03fff;
+ u32 fit = ohci_readl(ohci, &ohci->regs->fminterval) & FIT;
+
+ ohci_writel (ohci, (fit ^ FIT) | ohci->fminterval,
+ &ohci->regs->fminterval);
+ ohci_writel (ohci, ((9 * fi) / 10) & 0x3fff,
+ &ohci->regs->periodicstart);
+}
+
+/* AMD-756 (D2 rev) reports corrupt register contents in some cases.
+ * The erratum (#4) description is incorrect. AMD's workaround waits
+ * till some bits (mostly reserved) are clear; ok for all revs.
+ */
+#define read_roothub(hc, register, mask) ({ \
+ u32 temp = ohci_readl (hc, &hc->regs->roothub.register); \
+ if (temp == -1) \
+ hc->rh_state = OHCI_RH_HALTED; \
+ else if (hc->flags & OHCI_QUIRK_AMD756) \
+ while (temp & mask) \
+ temp = ohci_readl (hc, &hc->regs->roothub.register); \
+ temp; })
+
+static inline u32 roothub_a (struct ohci_hcd *hc)
+ { return read_roothub (hc, a, 0xfc0fe000); }
+static inline u32 roothub_b (struct ohci_hcd *hc)
+ { return ohci_readl (hc, &hc->regs->roothub.b); }
+static inline u32 roothub_status (struct ohci_hcd *hc)
+ { return ohci_readl (hc, &hc->regs->roothub.status); }
+static inline u32 roothub_portstatus (struct ohci_hcd *hc, int i)
+ { return read_roothub (hc, portstatus [i], 0xffe0fce0); }
+
+/* Declarations of things exported for use by ohci platform drivers */
+
+struct ohci_driver_overrides {
+ const char *product_desc;
+ size_t extra_priv_size;
+ int (*reset)(struct usb_hcd *hcd);
+};
+
+extern void ohci_init_driver(struct hc_driver *drv,
+ const struct ohci_driver_overrides *over);
+extern int ohci_restart(struct ohci_hcd *ohci);
+extern int ohci_setup(struct usb_hcd *hcd);
+#ifdef CONFIG_PM
+extern int ohci_suspend(struct usb_hcd *hcd, bool do_wakeup);
+extern int ohci_resume(struct usb_hcd *hcd, bool hibernated);
+#endif
+extern int ohci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+ u16 wIndex, char *buf, u16 wLength);
+extern int ohci_hub_status_data(struct usb_hcd *hcd, char *buf);
Code Review / kvmfornfv.git / blobdiff