* Broadcom specific Advanced Microcontroller Bus
* Broadcom USB-core driver (BCMA bus glue)
*
- * Copyright 2011-2012 Hauke Mehrtens <hauke@hauke-m.de>
+ * Copyright 2011-2015 Hauke Mehrtens <hauke@hauke-m.de>
+ * Copyright 2015 Felix Fietkau <nbd@openwrt.org>
*
* Based on ssb-ohci driver
* Copyright 2007 Michael Buesch <m@bues.ch>
#include <linux/platform_device.h>
#include <linux/module.h>
#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
#include <linux/usb/ehci_pdriver.h>
#include <linux/usb/ohci_pdriver.h>
}
/* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */
-static void bcma_hcd_init_chip(struct bcma_device *dev)
+static void bcma_hcd_init_chip_mips(struct bcma_device *dev)
{
u32 tmp;
}
}
+static void bcma_hcd_init_chip_arm_phy(struct bcma_device *dev)
+{
+ struct bcma_device *arm_core;
+ void __iomem *dmu;
+
+ arm_core = bcma_find_core(dev->bus, BCMA_CORE_ARMCA9);
+ if (!arm_core) {
+ dev_err(&dev->dev, "can not find ARM Cortex A9 ihost core\n");
+ return;
+ }
+
+ dmu = ioremap_nocache(arm_core->addr_s[0], 0x1000);
+ if (!dmu) {
+ dev_err(&dev->dev, "can not map ARM Cortex A9 ihost core\n");
+ return;
+ }
+
+ /* Unlock DMU PLL settings */
+ iowrite32(0x0000ea68, dmu + 0x180);
+
+ /* Write USB 2.0 PLL control setting */
+ iowrite32(0x00dd10c3, dmu + 0x164);
+
+ /* Lock DMU PLL settings */
+ iowrite32(0x00000000, dmu + 0x180);
+
+ iounmap(dmu);
+}
+
+static void bcma_hcd_init_chip_arm_hc(struct bcma_device *dev)
+{
+ u32 val;
+
+ /*
+ * Delay after PHY initialized to ensure HC is ready to be configured
+ */
+ usleep_range(1000, 2000);
+
+ /* Set packet buffer OUT threshold */
+ val = bcma_read32(dev, 0x94);
+ val &= 0xffff;
+ val |= 0x80 << 16;
+ bcma_write32(dev, 0x94, val);
+
+ /* Enable break memory transfer */
+ val = bcma_read32(dev, 0x9c);
+ val |= 1;
+ bcma_write32(dev, 0x9c, val);
+}
+
+static void bcma_hcd_init_chip_arm(struct bcma_device *dev)
+{
+ bcma_core_enable(dev, 0);
+
+ if (dev->bus->chipinfo.id == BCMA_CHIP_ID_BCM4707 ||
+ dev->bus->chipinfo.id == BCMA_CHIP_ID_BCM53018) {
+ if (dev->bus->chipinfo.pkg == BCMA_PKG_ID_BCM4707 ||
+ dev->bus->chipinfo.pkg == BCMA_PKG_ID_BCM4708)
+ bcma_hcd_init_chip_arm_phy(dev);
+
+ bcma_hcd_init_chip_arm_hc(dev);
+ }
+}
+
+static void bcma_hci_platform_power_gpio(struct bcma_device *dev, bool val)
+{
+ int gpio;
+
+ gpio = of_get_named_gpio(dev->dev.of_node, "vcc-gpio", 0);
+ if (!gpio_is_valid(gpio))
+ return;
+
+ if (val) {
+ gpio_request(gpio, "bcma-hcd-gpio");
+ gpio_set_value(gpio, 1);
+ } else {
+ gpio_set_value(gpio, 0);
+ gpio_free(gpio);
+ }
+}
+
static const struct usb_ehci_pdata ehci_pdata = {
};
{
struct platform_device *hci_dev;
struct resource hci_res[2];
- int ret = -ENOMEM;
+ int ret;
memset(hci_res, 0, sizeof(hci_res));
hci_dev = platform_device_alloc(ohci ? "ohci-platform" :
"ehci-platform" , 0);
if (!hci_dev)
- return NULL;
+ return ERR_PTR(-ENOMEM);
hci_dev->dev.parent = &dev->dev;
hci_dev->dev.dma_mask = &hci_dev->dev.coherent_dma_mask;
static int bcma_hcd_probe(struct bcma_device *dev)
{
int err;
- u16 chipid_top;
u32 ohci_addr;
struct bcma_hcd_device *usb_dev;
struct bcma_chipinfo *chipinfo;
chipinfo = &dev->bus->chipinfo;
- /* USBcores are only connected on embedded devices. */
- chipid_top = (chipinfo->id & 0xFF00);
- if (chipid_top != 0x4700 && chipid_top != 0x5300)
- return -ENODEV;
/* TODO: Probably need checks here; is the core connected? */
if (dma_set_mask_and_coherent(dev->dma_dev, DMA_BIT_MASK(32)))
return -EOPNOTSUPP;
- usb_dev = kzalloc(sizeof(struct bcma_hcd_device), GFP_KERNEL);
+ usb_dev = devm_kzalloc(&dev->dev, sizeof(struct bcma_hcd_device),
+ GFP_KERNEL);
if (!usb_dev)
return -ENOMEM;
- bcma_hcd_init_chip(dev);
+ bcma_hci_platform_power_gpio(dev, true);
+
+ switch (dev->id.id) {
+ case BCMA_CORE_NS_USB20:
+ bcma_hcd_init_chip_arm(dev);
+ break;
+ case BCMA_CORE_USB20_HOST:
+ bcma_hcd_init_chip_mips(dev);
+ break;
+ default:
+ return -ENODEV;
+ }
/* In AI chips EHCI is addrspace 0, OHCI is 1 */
ohci_addr = dev->addr_s[0];
- if ((chipinfo->id == 0x5357 || chipinfo->id == 0x4749)
+ if ((chipinfo->id == BCMA_CHIP_ID_BCM5357 ||
+ chipinfo->id == BCMA_CHIP_ID_BCM4749)
&& chipinfo->rev == 0)
ohci_addr = 0x18009000;
usb_dev->ohci_dev = bcma_hcd_create_pdev(dev, true, ohci_addr);
- if (IS_ERR(usb_dev->ohci_dev)) {
- err = PTR_ERR(usb_dev->ohci_dev);
- goto err_free_usb_dev;
- }
+ if (IS_ERR(usb_dev->ohci_dev))
+ return PTR_ERR(usb_dev->ohci_dev);
usb_dev->ehci_dev = bcma_hcd_create_pdev(dev, false, dev->addr);
if (IS_ERR(usb_dev->ehci_dev)) {
err_unregister_ohci_dev:
platform_device_unregister(usb_dev->ohci_dev);
-err_free_usb_dev:
- kfree(usb_dev);
return err;
}
static void bcma_hcd_shutdown(struct bcma_device *dev)
{
+ bcma_hci_platform_power_gpio(dev, false);
bcma_core_disable(dev, 0);
}
static int bcma_hcd_suspend(struct bcma_device *dev)
{
+ bcma_hci_platform_power_gpio(dev, false);
bcma_core_disable(dev, 0);
return 0;
static int bcma_hcd_resume(struct bcma_device *dev)
{
+ bcma_hci_platform_power_gpio(dev, true);
bcma_core_enable(dev, 0);
return 0;
static const struct bcma_device_id bcma_hcd_table[] = {
BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_USB20_HOST, BCMA_ANY_REV, BCMA_ANY_CLASS),
+ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_NS_USB20, BCMA_ANY_REV, BCMA_ANY_CLASS),
{},
};
MODULE_DEVICE_TABLE(bcma, bcma_hcd_table);
Code Review / kvmfornfv.git / blobdiff