Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / drivers / usb / gadget / udc / s3c2410_udc.h

diff --git a/kernel/drivers/usb/gadget/udc/s3c2410_udc.h b/kernel/drivers/usb/gadget/udc/s3c2410_udc.h
new file mode 100644 (file)
index 0000000..93bf225
--- /dev/null
+++ b/kernel/drivers/usb/gadget/udc/s3c2410_udc.h
@@ -0,0 +1,100 @@
+/*
+ * linux/drivers/usb/gadget/s3c2410_udc.h
+ * Samsung on-chip full speed USB device controllers
+ *
+ * Copyright (C) 2004-2007 Herbert Pötzl - Arnaud Patard
+ *     Additional cleanups by Ben Dooks <ben-linux@fluff.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _S3C2410_UDC_H
+#define _S3C2410_UDC_H
+
+struct s3c2410_ep {
+       struct list_head                queue;
+       unsigned long                   last_io;        /* jiffies timestamp */
+       struct usb_gadget               *gadget;
+       struct s3c2410_udc              *dev;
+       struct usb_ep                   ep;
+       u8                              num;
+
+       unsigned short                  fifo_size;
+       u8                              bEndpointAddress;
+       u8                              bmAttributes;
+
+       unsigned                        halted : 1;
+       unsigned                        already_seen : 1;
+       unsigned                        setup_stage : 1;
+};
+
+
+/* Warning : ep0 has a fifo of 16 bytes */
+/* Don't try to set 32 or 64            */
+/* also testusb 14 fails  wit 16 but is */
+/* fine with 8                          */
+#define EP0_FIFO_SIZE           8
+#define EP_FIFO_SIZE           64
+#define DEFAULT_POWER_STATE    0x00
+
+#define S3C2440_EP_FIFO_SIZE   128
+
+static const char ep0name [] = "ep0";
+
+static const char *const ep_name[] = {
+       ep0name,                                /* everyone has ep0 */
+       /* s3c2410 four bidirectional bulk endpoints */
+       "ep1-bulk", "ep2-bulk", "ep3-bulk", "ep4-bulk",
+};
+
+#define S3C2410_ENDPOINTS       ARRAY_SIZE(ep_name)
+
+struct s3c2410_request {
+       struct list_head                queue;          /* ep's requests */
+       struct usb_request              req;
+};
+
+enum ep0_state {
+        EP0_IDLE,
+        EP0_IN_DATA_PHASE,
+        EP0_OUT_DATA_PHASE,
+        EP0_END_XFER,
+        EP0_STALL,
+};
+
+static const char *ep0states[]= {
+        "EP0_IDLE",
+        "EP0_IN_DATA_PHASE",
+        "EP0_OUT_DATA_PHASE",
+        "EP0_END_XFER",
+        "EP0_STALL",
+};
+
+struct s3c2410_udc {
+       spinlock_t                      lock;
+
+       struct s3c2410_ep               ep[S3C2410_ENDPOINTS];
+       int                             address;
+       struct usb_gadget               gadget;
+       struct usb_gadget_driver        *driver;
+       struct s3c2410_request          fifo_req;
+       u8                              fifo_buf[EP_FIFO_SIZE];
+       u16                             devstatus;
+
+       u32                             port_status;
+       int                             ep0state;
+
+       unsigned                        got_irq : 1;
+
+       unsigned                        req_std : 1;
+       unsigned                        req_config : 1;
+       unsigned                        req_pending : 1;
+       u8                              vbus;
+       struct dentry                   *regs_info;
+};
+#define to_s3c2410(g)  (container_of((g), struct s3c2410_udc, gadget))
+
+#endif