--- /dev/null
+/*
+ * M66592 UDC (USB gadget)
+ *
+ * Copyright (C) 2006-2007 Renesas Solutions Corp.
+ *
+ * Author : Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#ifndef __M66592_UDC_H__
+#define __M66592_UDC_H__
+
+#include <linux/clk.h>
+#include <linux/usb/m66592.h>
+
+#define M66592_SYSCFG 0x00
+#define M66592_XTAL 0xC000 /* b15-14: Crystal selection */
+#define M66592_XTAL48 0x8000 /* 48MHz */
+#define M66592_XTAL24 0x4000 /* 24MHz */
+#define M66592_XTAL12 0x0000 /* 12MHz */
+#define M66592_XCKE 0x2000 /* b13: External clock enable */
+#define M66592_RCKE 0x1000 /* b12: Register clock enable */
+#define M66592_PLLC 0x0800 /* b11: PLL control */
+#define M66592_SCKE 0x0400 /* b10: USB clock enable */
+#define M66592_ATCKM 0x0100 /* b8: Automatic clock supply */
+#define M66592_HSE 0x0080 /* b7: Hi-speed enable */
+#define M66592_DCFM 0x0040 /* b6: Controller function select */
+#define M66592_DMRPD 0x0020 /* b5: D- pull down control */
+#define M66592_DPRPU 0x0010 /* b4: D+ pull up control */
+#define M66592_FSRPC 0x0004 /* b2: Full-speed receiver enable */
+#define M66592_PCUT 0x0002 /* b1: Low power sleep enable */
+#define M66592_USBE 0x0001 /* b0: USB module operation enable */
+
+#define M66592_SYSSTS 0x02
+#define M66592_LNST 0x0003 /* b1-0: D+, D- line status */
+#define M66592_SE1 0x0003 /* SE1 */
+#define M66592_KSTS 0x0002 /* K State */
+#define M66592_JSTS 0x0001 /* J State */
+#define M66592_SE0 0x0000 /* SE0 */
+
+#define M66592_DVSTCTR 0x04
+#define M66592_WKUP 0x0100 /* b8: Remote wakeup */
+#define M66592_RWUPE 0x0080 /* b7: Remote wakeup sense */
+#define M66592_USBRST 0x0040 /* b6: USB reset enable */
+#define M66592_RESUME 0x0020 /* b5: Resume enable */
+#define M66592_UACT 0x0010 /* b4: USB bus enable */
+#define M66592_RHST 0x0003 /* b1-0: Reset handshake status */
+#define M66592_HSMODE 0x0003 /* Hi-Speed mode */
+#define M66592_FSMODE 0x0002 /* Full-Speed mode */
+#define M66592_HSPROC 0x0001 /* HS handshake is processing */
+
+#define M66592_TESTMODE 0x06
+#define M66592_UTST 0x000F /* b4-0: Test select */
+#define M66592_H_TST_PACKET 0x000C /* HOST TEST Packet */
+#define M66592_H_TST_SE0_NAK 0x000B /* HOST TEST SE0 NAK */
+#define M66592_H_TST_K 0x000A /* HOST TEST K */
+#define M66592_H_TST_J 0x0009 /* HOST TEST J */
+#define M66592_H_TST_NORMAL 0x0000 /* HOST Normal Mode */
+#define M66592_P_TST_PACKET 0x0004 /* PERI TEST Packet */
+#define M66592_P_TST_SE0_NAK 0x0003 /* PERI TEST SE0 NAK */
+#define M66592_P_TST_K 0x0002 /* PERI TEST K */
+#define M66592_P_TST_J 0x0001 /* PERI TEST J */
+#define M66592_P_TST_NORMAL 0x0000 /* PERI Normal Mode */
+
+/* built-in registers */
+#define M66592_CFBCFG 0x0A
+#define M66592_D0FBCFG 0x0C
+#define M66592_LITTLE 0x0100 /* b8: Little endian mode */
+/* external chip case */
+#define M66592_PINCFG 0x0A
+#define M66592_LDRV 0x8000 /* b15: Drive Current Adjust */
+#define M66592_BIGEND 0x0100 /* b8: Big endian mode */
+
+#define M66592_DMA0CFG 0x0C
+#define M66592_DMA1CFG 0x0E
+#define M66592_DREQA 0x4000 /* b14: Dreq active select */
+#define M66592_BURST 0x2000 /* b13: Burst mode */
+#define M66592_DACKA 0x0400 /* b10: Dack active select */
+#define M66592_DFORM 0x0380 /* b9-7: DMA mode select */
+#define M66592_CPU_ADR_RD_WR 0x0000 /* Address + RD/WR mode (CPU bus) */
+#define M66592_CPU_DACK_RD_WR 0x0100 /* DACK + RD/WR mode (CPU bus) */
+#define M66592_CPU_DACK_ONLY 0x0180 /* DACK only mode (CPU bus) */
+#define M66592_SPLIT_DACK_ONLY 0x0200 /* DACK only mode (SPLIT bus) */
+#define M66592_SPLIT_DACK_DSTB 0x0300 /* DACK + DSTB0 mode (SPLIT bus) */
+#define M66592_DENDA 0x0040 /* b6: Dend active select */
+#define M66592_PKTM 0x0020 /* b5: Packet mode */
+#define M66592_DENDE 0x0010 /* b4: Dend enable */
+#define M66592_OBUS 0x0004 /* b2: OUTbus mode */
+
+/* common case */
+#define M66592_CFIFO 0x10
+#define M66592_D0FIFO 0x14
+#define M66592_D1FIFO 0x18
+
+#define M66592_CFIFOSEL 0x1E
+#define M66592_D0FIFOSEL 0x24
+#define M66592_D1FIFOSEL 0x2A
+#define M66592_RCNT 0x8000 /* b15: Read count mode */
+#define M66592_REW 0x4000 /* b14: Buffer rewind */
+#define M66592_DCLRM 0x2000 /* b13: DMA buffer clear mode */
+#define M66592_DREQE 0x1000 /* b12: DREQ output enable */
+#define M66592_MBW_8 0x0000 /* 8bit */
+#define M66592_MBW_16 0x0400 /* 16bit */
+#define M66592_MBW_32 0x0800 /* 32bit */
+#define M66592_TRENB 0x0200 /* b9: Transaction counter enable */
+#define M66592_TRCLR 0x0100 /* b8: Transaction counter clear */
+#define M66592_DEZPM 0x0080 /* b7: Zero-length packet mode */
+#define M66592_ISEL 0x0020 /* b5: DCP FIFO port direction select */
+#define M66592_CURPIPE 0x0007 /* b2-0: PIPE select */
+
+#define M66592_CFIFOCTR 0x20
+#define M66592_D0FIFOCTR 0x26
+#define M66592_D1FIFOCTR 0x2c
+#define M66592_BVAL 0x8000 /* b15: Buffer valid flag */
+#define M66592_BCLR 0x4000 /* b14: Buffer clear */
+#define M66592_FRDY 0x2000 /* b13: FIFO ready */
+#define M66592_DTLN 0x0FFF /* b11-0: FIFO received data length */
+
+#define M66592_CFIFOSIE 0x22
+#define M66592_TGL 0x8000 /* b15: Buffer toggle */
+#define M66592_SCLR 0x4000 /* b14: Buffer clear */
+#define M66592_SBUSY 0x2000 /* b13: SIE_FIFO busy */
+
+#define M66592_D0FIFOTRN 0x28
+#define M66592_D1FIFOTRN 0x2E
+#define M66592_TRNCNT 0xFFFF /* b15-0: Transaction counter */
+
+#define M66592_INTENB0 0x30
+#define M66592_VBSE 0x8000 /* b15: VBUS interrupt */
+#define M66592_RSME 0x4000 /* b14: Resume interrupt */
+#define M66592_SOFE 0x2000 /* b13: Frame update interrupt */
+#define M66592_DVSE 0x1000 /* b12: Device state transition interrupt */
+#define M66592_CTRE 0x0800 /* b11: Control transfer stage transition irq */
+#define M66592_BEMPE 0x0400 /* b10: Buffer empty interrupt */
+#define M66592_NRDYE 0x0200 /* b9: Buffer not ready interrupt */
+#define M66592_BRDYE 0x0100 /* b8: Buffer ready interrupt */
+#define M66592_URST 0x0080 /* b7: USB reset detected interrupt */
+#define M66592_SADR 0x0040 /* b6: Set address executed interrupt */
+#define M66592_SCFG 0x0020 /* b5: Set configuration executed interrupt */
+#define M66592_SUSP 0x0010 /* b4: Suspend detected interrupt */
+#define M66592_WDST 0x0008 /* b3: Control write data stage completed irq */
+#define M66592_RDST 0x0004 /* b2: Control read data stage completed irq */
+#define M66592_CMPL 0x0002 /* b1: Control transfer complete interrupt */
+#define M66592_SERR 0x0001 /* b0: Sequence error interrupt */
+
+#define M66592_INTENB1 0x32
+#define M66592_BCHGE 0x4000 /* b14: USB us chenge interrupt */
+#define M66592_DTCHE 0x1000 /* b12: Detach sense interrupt */
+#define M66592_SIGNE 0x0020 /* b5: SETUP IGNORE interrupt */
+#define M66592_SACKE 0x0010 /* b4: SETUP ACK interrupt */
+#define M66592_BRDYM 0x0004 /* b2: BRDY clear timing */
+#define M66592_INTL 0x0002 /* b1: Interrupt sense select */
+#define M66592_PCSE 0x0001 /* b0: PCUT enable by CS assert */
+
+#define M66592_BRDYENB 0x36
+#define M66592_BRDYSTS 0x46
+#define M66592_BRDY7 0x0080 /* b7: PIPE7 */
+#define M66592_BRDY6 0x0040 /* b6: PIPE6 */
+#define M66592_BRDY5 0x0020 /* b5: PIPE5 */
+#define M66592_BRDY4 0x0010 /* b4: PIPE4 */
+#define M66592_BRDY3 0x0008 /* b3: PIPE3 */
+#define M66592_BRDY2 0x0004 /* b2: PIPE2 */
+#define M66592_BRDY1 0x0002 /* b1: PIPE1 */
+#define M66592_BRDY0 0x0001 /* b1: PIPE0 */
+
+#define M66592_NRDYENB 0x38
+#define M66592_NRDYSTS 0x48
+#define M66592_NRDY7 0x0080 /* b7: PIPE7 */
+#define M66592_NRDY6 0x0040 /* b6: PIPE6 */
+#define M66592_NRDY5 0x0020 /* b5: PIPE5 */
+#define M66592_NRDY4 0x0010 /* b4: PIPE4 */
+#define M66592_NRDY3 0x0008 /* b3: PIPE3 */
+#define M66592_NRDY2 0x0004 /* b2: PIPE2 */
+#define M66592_NRDY1 0x0002 /* b1: PIPE1 */
+#define M66592_NRDY0 0x0001 /* b1: PIPE0 */
+
+#define M66592_BEMPENB 0x3A
+#define M66592_BEMPSTS 0x4A
+#define M66592_BEMP7 0x0080 /* b7: PIPE7 */
+#define M66592_BEMP6 0x0040 /* b6: PIPE6 */
+#define M66592_BEMP5 0x0020 /* b5: PIPE5 */
+#define M66592_BEMP4 0x0010 /* b4: PIPE4 */
+#define M66592_BEMP3 0x0008 /* b3: PIPE3 */
+#define M66592_BEMP2 0x0004 /* b2: PIPE2 */
+#define M66592_BEMP1 0x0002 /* b1: PIPE1 */
+#define M66592_BEMP0 0x0001 /* b0: PIPE0 */
+
+#define M66592_SOFCFG 0x3C
+#define M66592_SOFM 0x000C /* b3-2: SOF palse mode */
+#define M66592_SOF_125US 0x0008 /* SOF OUT 125us uFrame Signal */
+#define M66592_SOF_1MS 0x0004 /* SOF OUT 1ms Frame Signal */
+#define M66592_SOF_DISABLE 0x0000 /* SOF OUT Disable */
+
+#define M66592_INTSTS0 0x40
+#define M66592_VBINT 0x8000 /* b15: VBUS interrupt */
+#define M66592_RESM 0x4000 /* b14: Resume interrupt */
+#define M66592_SOFR 0x2000 /* b13: SOF frame update interrupt */
+#define M66592_DVST 0x1000 /* b12: Device state transition */
+#define M66592_CTRT 0x0800 /* b11: Control stage transition */
+#define M66592_BEMP 0x0400 /* b10: Buffer empty interrupt */
+#define M66592_NRDY 0x0200 /* b9: Buffer not ready interrupt */
+#define M66592_BRDY 0x0100 /* b8: Buffer ready interrupt */
+#define M66592_VBSTS 0x0080 /* b7: VBUS input port */
+#define M66592_DVSQ 0x0070 /* b6-4: Device state */
+#define M66592_DS_SPD_CNFG 0x0070 /* Suspend Configured */
+#define M66592_DS_SPD_ADDR 0x0060 /* Suspend Address */
+#define M66592_DS_SPD_DFLT 0x0050 /* Suspend Default */
+#define M66592_DS_SPD_POWR 0x0040 /* Suspend Powered */
+#define M66592_DS_SUSP 0x0040 /* Suspend */
+#define M66592_DS_CNFG 0x0030 /* Configured */
+#define M66592_DS_ADDS 0x0020 /* Address */
+#define M66592_DS_DFLT 0x0010 /* Default */
+#define M66592_DS_POWR 0x0000 /* Powered */
+#define M66592_DVSQS 0x0030 /* b5-4: Device state */
+#define M66592_VALID 0x0008 /* b3: Setup packet detected flag */
+#define M66592_CTSQ 0x0007 /* b2-0: Control transfer stage */
+#define M66592_CS_SQER 0x0006 /* Sequence error */
+#define M66592_CS_WRND 0x0005 /* Control write nodata status */
+#define M66592_CS_WRSS 0x0004 /* Control write status stage */
+#define M66592_CS_WRDS 0x0003 /* Control write data stage */
+#define M66592_CS_RDSS 0x0002 /* Control read status stage */
+#define M66592_CS_RDDS 0x0001 /* Control read data stage */
+#define M66592_CS_IDST 0x0000 /* Idle or setup stage */
+
+#define M66592_INTSTS1 0x42
+#define M66592_BCHG 0x4000 /* b14: USB bus chenge interrupt */
+#define M66592_DTCH 0x1000 /* b12: Detach sense interrupt */
+#define M66592_SIGN 0x0020 /* b5: SETUP IGNORE interrupt */
+#define M66592_SACK 0x0010 /* b4: SETUP ACK interrupt */
+
+#define M66592_FRMNUM 0x4C
+#define M66592_OVRN 0x8000 /* b15: Overrun error */
+#define M66592_CRCE 0x4000 /* b14: Received data error */
+#define M66592_SOFRM 0x0800 /* b11: SOF output mode */
+#define M66592_FRNM 0x07FF /* b10-0: Frame number */
+
+#define M66592_UFRMNUM 0x4E
+#define M66592_UFRNM 0x0007 /* b2-0: Micro frame number */
+
+#define M66592_RECOVER 0x50
+#define M66592_STSRECOV 0x0700 /* Status recovery */
+#define M66592_STSR_HI 0x0400 /* FULL(0) or HI(1) Speed */
+#define M66592_STSR_DEFAULT 0x0100 /* Default state */
+#define M66592_STSR_ADDRESS 0x0200 /* Address state */
+#define M66592_STSR_CONFIG 0x0300 /* Configured state */
+#define M66592_USBADDR 0x007F /* b6-0: USB address */
+
+#define M66592_USBREQ 0x54
+#define M66592_bRequest 0xFF00 /* b15-8: bRequest */
+#define M66592_GET_STATUS 0x0000
+#define M66592_CLEAR_FEATURE 0x0100
+#define M66592_ReqRESERVED 0x0200
+#define M66592_SET_FEATURE 0x0300
+#define M66592_ReqRESERVED1 0x0400
+#define M66592_SET_ADDRESS 0x0500
+#define M66592_GET_DESCRIPTOR 0x0600
+#define M66592_SET_DESCRIPTOR 0x0700
+#define M66592_GET_CONFIGURATION 0x0800
+#define M66592_SET_CONFIGURATION 0x0900
+#define M66592_GET_INTERFACE 0x0A00
+#define M66592_SET_INTERFACE 0x0B00
+#define M66592_SYNCH_FRAME 0x0C00
+#define M66592_bmRequestType 0x00FF /* b7-0: bmRequestType */
+#define M66592_bmRequestTypeDir 0x0080 /* b7 : Data direction */
+#define M66592_HOST_TO_DEVICE 0x0000
+#define M66592_DEVICE_TO_HOST 0x0080
+#define M66592_bmRequestTypeType 0x0060 /* b6-5: Type */
+#define M66592_STANDARD 0x0000
+#define M66592_CLASS 0x0020
+#define M66592_VENDOR 0x0040
+#define M66592_bmRequestTypeRecip 0x001F /* b4-0: Recipient */
+#define M66592_DEVICE 0x0000
+#define M66592_INTERFACE 0x0001
+#define M66592_ENDPOINT 0x0002
+
+#define M66592_USBVAL 0x56
+#define M66592_wValue 0xFFFF /* b15-0: wValue */
+/* Standard Feature Selector */
+#define M66592_ENDPOINT_HALT 0x0000
+#define M66592_DEVICE_REMOTE_WAKEUP 0x0001
+#define M66592_TEST_MODE 0x0002
+/* Descriptor Types */
+#define M66592_DT_TYPE 0xFF00
+#define M66592_GET_DT_TYPE(v) (((v) & DT_TYPE) >> 8)
+#define M66592_DT_DEVICE 0x01
+#define M66592_DT_CONFIGURATION 0x02
+#define M66592_DT_STRING 0x03
+#define M66592_DT_INTERFACE 0x04
+#define M66592_DT_ENDPOINT 0x05
+#define M66592_DT_DEVICE_QUALIFIER 0x06
+#define M66592_DT_OTHER_SPEED_CONFIGURATION 0x07
+#define M66592_DT_INTERFACE_POWER 0x08
+#define M66592_DT_INDEX 0x00FF
+#define M66592_CONF_NUM 0x00FF
+#define M66592_ALT_SET 0x00FF
+
+#define M66592_USBINDEX 0x58
+#define M66592_wIndex 0xFFFF /* b15-0: wIndex */
+#define M66592_TEST_SELECT 0xFF00 /* b15-b8: Test Mode */
+#define M66592_TEST_J 0x0100 /* Test_J */
+#define M66592_TEST_K 0x0200 /* Test_K */
+#define M66592_TEST_SE0_NAK 0x0300 /* Test_SE0_NAK */
+#define M66592_TEST_PACKET 0x0400 /* Test_Packet */
+#define M66592_TEST_FORCE_ENABLE 0x0500 /* Test_Force_Enable */
+#define M66592_TEST_STSelectors 0x0600 /* Standard test selectors */
+#define M66592_TEST_Reserved 0x4000 /* Reserved */
+#define M66592_TEST_VSTModes 0xC000 /* Vendor-specific tests */
+#define M66592_EP_DIR 0x0080 /* b7: Endpoint Direction */
+#define M66592_EP_DIR_IN 0x0080
+#define M66592_EP_DIR_OUT 0x0000
+
+#define M66592_USBLENG 0x5A
+#define M66592_wLength 0xFFFF /* b15-0: wLength */
+
+#define M66592_DCPCFG 0x5C
+#define M66592_CNTMD 0x0100 /* b8: Continuous transfer mode */
+#define M66592_DIR 0x0010 /* b4: Control transfer DIR select */
+
+#define M66592_DCPMAXP 0x5E
+#define M66592_DEVSEL 0xC000 /* b15-14: Device address select */
+#define M66592_DEVICE_0 0x0000 /* Device address 0 */
+#define M66592_DEVICE_1 0x4000 /* Device address 1 */
+#define M66592_DEVICE_2 0x8000 /* Device address 2 */
+#define M66592_DEVICE_3 0xC000 /* Device address 3 */
+#define M66592_MAXP 0x007F /* b6-0: Maxpacket size of ep0 */
+
+#define M66592_DCPCTR 0x60
+#define M66592_BSTS 0x8000 /* b15: Buffer status */
+#define M66592_SUREQ 0x4000 /* b14: Send USB request */
+#define M66592_SQCLR 0x0100 /* b8: Sequence toggle bit clear */
+#define M66592_SQSET 0x0080 /* b7: Sequence toggle bit set */
+#define M66592_SQMON 0x0040 /* b6: Sequence toggle bit monitor */
+#define M66592_CCPL 0x0004 /* b2: control transfer complete */
+#define M66592_PID 0x0003 /* b1-0: Response PID */
+#define M66592_PID_STALL 0x0002 /* STALL */
+#define M66592_PID_BUF 0x0001 /* BUF */
+#define M66592_PID_NAK 0x0000 /* NAK */
+
+#define M66592_PIPESEL 0x64
+#define M66592_PIPENM 0x0007 /* b2-0: Pipe select */
+#define M66592_PIPE0 0x0000 /* PIPE 0 */
+#define M66592_PIPE1 0x0001 /* PIPE 1 */
+#define M66592_PIPE2 0x0002 /* PIPE 2 */
+#define M66592_PIPE3 0x0003 /* PIPE 3 */
+#define M66592_PIPE4 0x0004 /* PIPE 4 */
+#define M66592_PIPE5 0x0005 /* PIPE 5 */
+#define M66592_PIPE6 0x0006 /* PIPE 6 */
+#define M66592_PIPE7 0x0007 /* PIPE 7 */
+
+#define M66592_PIPECFG 0x66
+#define M66592_TYP 0xC000 /* b15-14: Transfer type */
+#define M66592_ISO 0xC000 /* Isochronous */
+#define M66592_INT 0x8000 /* Interrupt */
+#define M66592_BULK 0x4000 /* Bulk */
+#define M66592_BFRE 0x0400 /* b10: Buffer ready interrupt mode */
+#define M66592_DBLB 0x0200 /* b9: Double buffer mode select */
+#define M66592_CNTMD 0x0100 /* b8: Continuous transfer mode */
+#define M66592_SHTNAK 0x0080 /* b7: Transfer end NAK */
+#define M66592_DIR 0x0010 /* b4: Transfer direction select */
+#define M66592_DIR_H_OUT 0x0010 /* HOST OUT */
+#define M66592_DIR_P_IN 0x0010 /* PERI IN */
+#define M66592_DIR_H_IN 0x0000 /* HOST IN */
+#define M66592_DIR_P_OUT 0x0000 /* PERI OUT */
+#define M66592_EPNUM 0x000F /* b3-0: Eendpoint number select */
+#define M66592_EP1 0x0001
+#define M66592_EP2 0x0002
+#define M66592_EP3 0x0003
+#define M66592_EP4 0x0004
+#define M66592_EP5 0x0005
+#define M66592_EP6 0x0006
+#define M66592_EP7 0x0007
+#define M66592_EP8 0x0008
+#define M66592_EP9 0x0009
+#define M66592_EP10 0x000A
+#define M66592_EP11 0x000B
+#define M66592_EP12 0x000C
+#define M66592_EP13 0x000D
+#define M66592_EP14 0x000E
+#define M66592_EP15 0x000F
+
+#define M66592_PIPEBUF 0x68
+#define M66592_BUFSIZE 0x7C00 /* b14-10: Pipe buffer size */
+#define M66592_BUF_SIZE(x) ((((x) / 64) - 1) << 10)
+#define M66592_BUFNMB 0x00FF /* b7-0: Pipe buffer number */
+
+#define M66592_PIPEMAXP 0x6A
+#define M66592_MXPS 0x07FF /* b10-0: Maxpacket size */
+
+#define M66592_PIPEPERI 0x6C
+#define M66592_IFIS 0x1000 /* b12: ISO in-buffer flush mode */
+#define M66592_IITV 0x0007 /* b2-0: ISO interval */
+
+#define M66592_PIPE1CTR 0x70
+#define M66592_PIPE2CTR 0x72
+#define M66592_PIPE3CTR 0x74
+#define M66592_PIPE4CTR 0x76
+#define M66592_PIPE5CTR 0x78
+#define M66592_PIPE6CTR 0x7A
+#define M66592_PIPE7CTR 0x7C
+#define M66592_BSTS 0x8000 /* b15: Buffer status */
+#define M66592_INBUFM 0x4000 /* b14: IN buffer monitor (PIPE 1-5) */
+#define M66592_ACLRM 0x0200 /* b9: Out buffer auto clear mode */
+#define M66592_SQCLR 0x0100 /* b8: Sequence toggle bit clear */
+#define M66592_SQSET 0x0080 /* b7: Sequence toggle bit set */
+#define M66592_SQMON 0x0040 /* b6: Sequence toggle bit monitor */
+#define M66592_PID 0x0003 /* b1-0: Response PID */
+
+#define M66592_INVALID_REG 0x7E
+
+
+#define get_pipectr_addr(pipenum) (M66592_PIPE1CTR + (pipenum - 1) * 2)
+
+#define M66592_MAX_SAMPLING 10
+
+#define M66592_MAX_NUM_PIPE 8
+#define M66592_MAX_NUM_BULK 3
+#define M66592_MAX_NUM_ISOC 2
+#define M66592_MAX_NUM_INT 2
+
+#define M66592_BASE_PIPENUM_BULK 3
+#define M66592_BASE_PIPENUM_ISOC 1
+#define M66592_BASE_PIPENUM_INT 6
+
+#define M66592_BASE_BUFNUM 6
+#define M66592_MAX_BUFNUM 0x4F
+
+struct m66592_pipe_info {
+ u16 pipe;
+ u16 epnum;
+ u16 maxpacket;
+ u16 type;
+ u16 interval;
+ u16 dir_in;
+};
+
+struct m66592_request {
+ struct usb_request req;
+ struct list_head queue;
+};
+
+struct m66592_ep {
+ struct usb_ep ep;
+ struct m66592 *m66592;
+
+ struct list_head queue;
+ unsigned busy:1;
+ unsigned internal_ccpl:1; /* use only control */
+
+ /* this member can able to after m66592_enable */
+ unsigned use_dma:1;
+ u16 pipenum;
+ u16 type;
+
+ /* register address */
+ unsigned long fifoaddr;
+ unsigned long fifosel;
+ unsigned long fifoctr;
+ unsigned long fifotrn;
+ unsigned long pipectr;
+};
+
+struct m66592 {
+ spinlock_t lock;
+ void __iomem *reg;
+ struct clk *clk;
+ struct m66592_platdata *pdata;
+ unsigned long irq_trigger;
+
+ struct usb_gadget gadget;
+ struct usb_gadget_driver *driver;
+
+ struct m66592_ep ep[M66592_MAX_NUM_PIPE];
+ struct m66592_ep *pipenum2ep[M66592_MAX_NUM_PIPE];
+ struct m66592_ep *epaddr2ep[16];
+
+ struct usb_request *ep0_req; /* for internal request */
+ __le16 ep0_data; /* for internal request */
+ u16 old_vbus;
+
+ struct timer_list timer;
+
+ int scount;
+
+ int old_dvsq;
+
+ /* pipe config */
+ int bulk;
+ int interrupt;
+ int isochronous;
+ int num_dma;
+};
+#define to_m66592(g) (container_of((g), struct m66592, gadget))
+
+#define gadget_to_m66592(_gadget) container_of(_gadget, struct m66592, gadget)
+#define m66592_to_gadget(m66592) (&m66592->gadget)
+
+#define is_bulk_pipe(pipenum) \
+ ((pipenum >= M66592_BASE_PIPENUM_BULK) && \
+ (pipenum < (M66592_BASE_PIPENUM_BULK + M66592_MAX_NUM_BULK)))
+#define is_interrupt_pipe(pipenum) \
+ ((pipenum >= M66592_BASE_PIPENUM_INT) && \
+ (pipenum < (M66592_BASE_PIPENUM_INT + M66592_MAX_NUM_INT)))
+#define is_isoc_pipe(pipenum) \
+ ((pipenum >= M66592_BASE_PIPENUM_ISOC) && \
+ (pipenum < (M66592_BASE_PIPENUM_ISOC + M66592_MAX_NUM_ISOC)))
+
+#define enable_irq_ready(m66592, pipenum) \
+ enable_pipe_irq(m66592, pipenum, M66592_BRDYENB)
+#define disable_irq_ready(m66592, pipenum) \
+ disable_pipe_irq(m66592, pipenum, M66592_BRDYENB)
+#define enable_irq_empty(m66592, pipenum) \
+ enable_pipe_irq(m66592, pipenum, M66592_BEMPENB)
+#define disable_irq_empty(m66592, pipenum) \
+ disable_pipe_irq(m66592, pipenum, M66592_BEMPENB)
+#define enable_irq_nrdy(m66592, pipenum) \
+ enable_pipe_irq(m66592, pipenum, M66592_NRDYENB)
+#define disable_irq_nrdy(m66592, pipenum) \
+ disable_pipe_irq(m66592, pipenum, M66592_NRDYENB)
+
+/*-------------------------------------------------------------------------*/
+static inline u16 m66592_read(struct m66592 *m66592, unsigned long offset)
+{
+ return ioread16(m66592->reg + offset);
+}
+
+static inline void m66592_read_fifo(struct m66592 *m66592,
+ unsigned long offset,
+ void *buf, unsigned long len)
+{
+ void __iomem *fifoaddr = m66592->reg + offset;
+
+ if (m66592->pdata->on_chip) {
+ len = (len + 3) / 4;
+ ioread32_rep(fifoaddr, buf, len);
+ } else {
+ len = (len + 1) / 2;
+ ioread16_rep(fifoaddr, buf, len);
+ }
+}
+
+static inline void m66592_write(struct m66592 *m66592, u16 val,
+ unsigned long offset)
+{
+ iowrite16(val, m66592->reg + offset);
+}
+
+static inline void m66592_mdfy(struct m66592 *m66592, u16 val, u16 pat,
+ unsigned long offset)
+{
+ u16 tmp;
+ tmp = m66592_read(m66592, offset);
+ tmp = tmp & (~pat);
+ tmp = tmp | val;
+ m66592_write(m66592, tmp, offset);
+}
+
+#define m66592_bclr(m66592, val, offset) \
+ m66592_mdfy(m66592, 0, val, offset)
+#define m66592_bset(m66592, val, offset) \
+ m66592_mdfy(m66592, val, 0, offset)
+
+static inline void m66592_write_fifo(struct m66592 *m66592,
+ struct m66592_ep *ep,
+ void *buf, unsigned long len)
+{
+ void __iomem *fifoaddr = m66592->reg + ep->fifoaddr;
+
+ if (m66592->pdata->on_chip) {
+ unsigned long count;
+ unsigned char *pb;
+ int i;
+
+ count = len / 4;
+ iowrite32_rep(fifoaddr, buf, count);
+
+ if (len & 0x00000003) {
+ pb = buf + count * 4;
+ for (i = 0; i < (len & 0x00000003); i++) {
+ if (m66592_read(m66592, M66592_CFBCFG)) /* le */
+ iowrite8(pb[i], fifoaddr + (3 - i));
+ else
+ iowrite8(pb[i], fifoaddr + i);
+ }
+ }
+ } else {
+ unsigned long odd = len & 0x0001;
+
+ len = len / 2;
+ iowrite16_rep(fifoaddr, buf, len);
+ if (odd) {
+ unsigned char *p = buf + len*2;
+ if (m66592->pdata->wr0_shorted_to_wr1)
+ m66592_bclr(m66592, M66592_MBW_16, ep->fifosel);
+ iowrite8(*p, fifoaddr);
+ if (m66592->pdata->wr0_shorted_to_wr1)
+ m66592_bset(m66592, M66592_MBW_16, ep->fifosel);
+ }
+ }
+}
+
+#endif /* ifndef __M66592_UDC_H__ */
+
+
Code Review / kvmfornfv.git / blobdiff