--- /dev/null
+/*
+ * printer.c -- Printer gadget driver
+ *
+ * Copyright (C) 2003-2005 David Brownell
+ * Copyright (C) 2006 Craig W. Nadler
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <asm/byteorder.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/composite.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/g_printer.h>
+
+#include "gadget_chips.h"
+
+USB_GADGET_COMPOSITE_OPTIONS();
+
+#define DRIVER_DESC "Printer Gadget"
+#define DRIVER_VERSION "2015 FEB 17"
+
+static const char shortname [] = "printer";
+static const char driver_desc [] = DRIVER_DESC;
+
+#include "u_printer.h"
+
+/*-------------------------------------------------------------------------*/
+
+/* DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!!
+ * Instead: allocate your own, using normal USB-IF procedures.
+ */
+
+/* Thanks to NetChip Technologies for donating this product ID.
+ */
+#define PRINTER_VENDOR_NUM 0x0525 /* NetChip */
+#define PRINTER_PRODUCT_NUM 0xa4a8 /* Linux-USB Printer Gadget */
+
+/* Some systems will want different product identifiers published in the
+ * device descriptor, either numbers or strings or both. These string
+ * parameters are in UTF-8 (superset of ASCII's 7 bit characters).
+ */
+
+module_param_named(iSerialNum, coverwrite.serial_number, charp, S_IRUGO);
+MODULE_PARM_DESC(iSerialNum, "1");
+
+static char *iPNPstring;
+module_param(iPNPstring, charp, S_IRUGO);
+MODULE_PARM_DESC(iPNPstring, "MFG:linux;MDL:g_printer;CLS:PRINTER;SN:1;");
+
+/* Number of requests to allocate per endpoint, not used for ep0. */
+static unsigned qlen = 10;
+module_param(qlen, uint, S_IRUGO|S_IWUSR);
+
+#define QLEN qlen
+
+static struct usb_function_instance *fi_printer;
+static struct usb_function *f_printer;
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * DESCRIPTORS ... most are static, but strings and (full) configuration
+ * descriptors are built on demand.
+ */
+
+static struct usb_device_descriptor device_desc = {
+ .bLength = sizeof device_desc,
+ .bDescriptorType = USB_DT_DEVICE,
+ .bcdUSB = cpu_to_le16(0x0200),
+ .bDeviceClass = USB_CLASS_PER_INTERFACE,
+ .bDeviceSubClass = 0,
+ .bDeviceProtocol = 0,
+ .idVendor = cpu_to_le16(PRINTER_VENDOR_NUM),
+ .idProduct = cpu_to_le16(PRINTER_PRODUCT_NUM),
+ .bNumConfigurations = 1
+};
+
+static struct usb_otg_descriptor otg_descriptor = {
+ .bLength = sizeof otg_descriptor,
+ .bDescriptorType = USB_DT_OTG,
+ .bmAttributes = USB_OTG_SRP,
+};
+
+static const struct usb_descriptor_header *otg_desc[] = {
+ (struct usb_descriptor_header *) &otg_descriptor,
+ NULL,
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* descriptors that are built on-demand */
+
+static char product_desc [40] = DRIVER_DESC;
+static char serial_num [40] = "1";
+static char pnp_string[PNP_STRING_LEN] =
+ "XXMFG:linux;MDL:g_printer;CLS:PRINTER;SN:1;";
+
+/* static strings, in UTF-8 */
+static struct usb_string strings [] = {
+ [USB_GADGET_MANUFACTURER_IDX].s = "",
+ [USB_GADGET_PRODUCT_IDX].s = product_desc,
+ [USB_GADGET_SERIAL_IDX].s = serial_num,
+ { } /* end of list */
+};
+
+static struct usb_gadget_strings stringtab_dev = {
+ .language = 0x0409, /* en-us */
+ .strings = strings,
+};
+
+static struct usb_gadget_strings *dev_strings[] = {
+ &stringtab_dev,
+ NULL,
+};
+
+static struct usb_configuration printer_cfg_driver = {
+ .label = "printer",
+ .bConfigurationValue = 1,
+ .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
+};
+
+static int printer_do_config(struct usb_configuration *c)
+{
+ struct usb_gadget *gadget = c->cdev->gadget;
+ int status = 0;
+
+ usb_ep_autoconfig_reset(gadget);
+
+ usb_gadget_set_selfpowered(gadget);
+
+ if (gadget_is_otg(gadget)) {
+ otg_descriptor.bmAttributes |= USB_OTG_HNP;
+ printer_cfg_driver.descriptors = otg_desc;
+ printer_cfg_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+ }
+
+ f_printer = usb_get_function(fi_printer);
+ if (IS_ERR(f_printer))
+ return PTR_ERR(f_printer);
+
+ status = usb_add_function(c, f_printer);
+ if (status < 0)
+ usb_put_function(f_printer);
+
+ return status;
+}
+
+static int printer_bind(struct usb_composite_dev *cdev)
+{
+ struct f_printer_opts *opts;
+ int ret, len;
+
+ fi_printer = usb_get_function_instance("printer");
+ if (IS_ERR(fi_printer))
+ return PTR_ERR(fi_printer);
+
+ if (iPNPstring)
+ strlcpy(&pnp_string[2], iPNPstring, PNP_STRING_LEN - 2);
+
+ len = strlen(pnp_string);
+ pnp_string[0] = (len >> 8) & 0xFF;
+ pnp_string[1] = len & 0xFF;
+
+ opts = container_of(fi_printer, struct f_printer_opts, func_inst);
+ opts->minor = 0;
+ memcpy(opts->pnp_string, pnp_string, PNP_STRING_LEN);
+ opts->q_len = QLEN;
+
+ ret = usb_string_ids_tab(cdev, strings);
+ if (ret < 0) {
+ usb_put_function_instance(fi_printer);
+ return ret;
+ }
+ device_desc.iManufacturer = strings[USB_GADGET_MANUFACTURER_IDX].id;
+ device_desc.iProduct = strings[USB_GADGET_PRODUCT_IDX].id;
+ device_desc.iSerialNumber = strings[USB_GADGET_SERIAL_IDX].id;
+
+ ret = usb_add_config(cdev, &printer_cfg_driver, printer_do_config);
+ if (ret) {
+ usb_put_function_instance(fi_printer);
+ return ret;
+ }
+ usb_composite_overwrite_options(cdev, &coverwrite);
+ return ret;
+}
+
+static int printer_unbind(struct usb_composite_dev *cdev)
+{
+ usb_put_function(f_printer);
+ usb_put_function_instance(fi_printer);
+
+ return 0;
+}
+
+static struct usb_composite_driver printer_driver = {
+ .name = shortname,
+ .dev = &device_desc,
+ .strings = dev_strings,
+ .max_speed = USB_SPEED_SUPER,
+ .bind = printer_bind,
+ .unbind = printer_unbind,
+};
+
+module_usb_composite_driver(printer_driver);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Craig Nadler");
+MODULE_LICENSE("GPL");
Code Review / kvmfornfv.git / blobdiff