--- /dev/null
+/*
+ * u_ether.h -- interface to USB gadget "ethernet link" utilities
+ *
+ * Copyright (C) 2003-2005,2008 David Brownell
+ * Copyright (C) 2003-2004 Robert Schwebel, Benedikt Spranger
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __U_ETHER_H
+#define __U_ETHER_H
+
+#include <linux/err.h>
+#include <linux/if_ether.h>
+#include <linux/usb/composite.h>
+#include <linux/usb/cdc.h>
+#include <linux/netdevice.h>
+
+#include "gadget_chips.h"
+
+#define QMULT_DEFAULT 5
+
+/*
+ * dev_addr: initial value
+ * changed by "ifconfig usb0 hw ether xx:xx:xx:xx:xx:xx"
+ * host_addr: this address is invisible to ifconfig
+ */
+#define USB_ETHERNET_MODULE_PARAMETERS() \
+ static unsigned qmult = QMULT_DEFAULT; \
+ module_param(qmult, uint, S_IRUGO|S_IWUSR); \
+ MODULE_PARM_DESC(qmult, "queue length multiplier at high/super speed");\
+ \
+ static char *dev_addr; \
+ module_param(dev_addr, charp, S_IRUGO); \
+ MODULE_PARM_DESC(dev_addr, "Device Ethernet Address"); \
+ \
+ static char *host_addr; \
+ module_param(host_addr, charp, S_IRUGO); \
+ MODULE_PARM_DESC(host_addr, "Host Ethernet Address")
+
+struct eth_dev;
+
+/*
+ * This represents the USB side of an "ethernet" link, managed by a USB
+ * function which provides control and (maybe) framing. Two functions
+ * in different configurations could share the same ethernet link/netdev,
+ * using different host interaction models.
+ *
+ * There is a current limitation that only one instance of this link may
+ * be present in any given configuration. When that's a problem, network
+ * layer facilities can be used to package multiple logical links on this
+ * single "physical" one.
+ */
+struct gether {
+ struct usb_function func;
+
+ /* updated by gether_{connect,disconnect} */
+ struct eth_dev *ioport;
+
+ /* endpoints handle full and/or high speeds */
+ struct usb_ep *in_ep;
+ struct usb_ep *out_ep;
+
+ bool is_zlp_ok;
+
+ u16 cdc_filter;
+
+ /* hooks for added framing, as needed for RNDIS and EEM. */
+ u32 header_len;
+ /* NCM requires fixed size bundles */
+ bool is_fixed;
+ u32 fixed_out_len;
+ u32 fixed_in_len;
+ bool supports_multi_frame;
+ struct sk_buff *(*wrap)(struct gether *port,
+ struct sk_buff *skb);
+ int (*unwrap)(struct gether *port,
+ struct sk_buff *skb,
+ struct sk_buff_head *list);
+
+ /* called on network open/close */
+ void (*open)(struct gether *);
+ void (*close)(struct gether *);
+};
+
+#define DEFAULT_FILTER (USB_CDC_PACKET_TYPE_BROADCAST \
+ |USB_CDC_PACKET_TYPE_ALL_MULTICAST \
+ |USB_CDC_PACKET_TYPE_PROMISCUOUS \
+ |USB_CDC_PACKET_TYPE_DIRECTED)
+
+/* variant of gether_setup that allows customizing network device name */
+struct eth_dev *gether_setup_name(struct usb_gadget *g,
+ const char *dev_addr, const char *host_addr,
+ u8 ethaddr[ETH_ALEN], unsigned qmult, const char *netname);
+
+/* netdev setup/teardown as directed by the gadget driver */
+/* gether_setup - initialize one ethernet-over-usb link
+ * @g: gadget to associated with these links
+ * @ethaddr: NULL, or a buffer in which the ethernet address of the
+ * host side of the link is recorded
+ * Context: may sleep
+ *
+ * This sets up the single network link that may be exported by a
+ * gadget driver using this framework. The link layer addresses are
+ * set up using module parameters.
+ *
+ * Returns a eth_dev pointer on success, or an ERR_PTR on failure
+ */
+static inline struct eth_dev *gether_setup(struct usb_gadget *g,
+ const char *dev_addr, const char *host_addr,
+ u8 ethaddr[ETH_ALEN], unsigned qmult)
+{
+ return gether_setup_name(g, dev_addr, host_addr, ethaddr, qmult, "usb");
+}
+
+/*
+ * variant of gether_setup_default that allows customizing
+ * network device name
+ */
+struct net_device *gether_setup_name_default(const char *netname);
+
+/*
+ * gether_register_netdev - register the net device
+ * @net: net device to register
+ *
+ * Registers the net device associated with this ethernet-over-usb link
+ *
+ */
+int gether_register_netdev(struct net_device *net);
+
+/* gether_setup_default - initialize one ethernet-over-usb link
+ * Context: may sleep
+ *
+ * This sets up the single network link that may be exported by a
+ * gadget driver using this framework. The link layer addresses
+ * are set to random values.
+ *
+ * Returns negative errno, or zero on success
+ */
+static inline struct net_device *gether_setup_default(void)
+{
+ return gether_setup_name_default("usb");
+}
+
+/**
+ * gether_set_gadget - initialize one ethernet-over-usb link with a gadget
+ * @net: device representing this link
+ * @g: the gadget to initialize with
+ *
+ * This associates one ethernet-over-usb link with a gadget.
+ */
+void gether_set_gadget(struct net_device *net, struct usb_gadget *g);
+
+/**
+ * gether_set_dev_addr - initialize an ethernet-over-usb link with eth address
+ * @net: device representing this link
+ * @dev_addr: eth address of this device
+ *
+ * This sets the device-side Ethernet address of this ethernet-over-usb link
+ * if dev_addr is correct.
+ * Returns negative errno if the new address is incorrect.
+ */
+int gether_set_dev_addr(struct net_device *net, const char *dev_addr);
+
+/**
+ * gether_get_dev_addr - get an ethernet-over-usb link eth address
+ * @net: device representing this link
+ * @dev_addr: place to store device's eth address
+ * @len: length of the @dev_addr buffer
+ *
+ * This gets the device-side Ethernet address of this ethernet-over-usb link.
+ * Returns zero on success, else negative errno.
+ */
+int gether_get_dev_addr(struct net_device *net, char *dev_addr, int len);
+
+/**
+ * gether_set_host_addr - initialize an ethernet-over-usb link with host address
+ * @net: device representing this link
+ * @host_addr: eth address of the host
+ *
+ * This sets the host-side Ethernet address of this ethernet-over-usb link
+ * if host_addr is correct.
+ * Returns negative errno if the new address is incorrect.
+ */
+int gether_set_host_addr(struct net_device *net, const char *host_addr);
+
+/**
+ * gether_get_host_addr - get an ethernet-over-usb link host address
+ * @net: device representing this link
+ * @host_addr: place to store eth address of the host
+ * @len: length of the @host_addr buffer
+ *
+ * This gets the host-side Ethernet address of this ethernet-over-usb link.
+ * Returns zero on success, else negative errno.
+ */
+int gether_get_host_addr(struct net_device *net, char *host_addr, int len);
+
+/**
+ * gether_get_host_addr_cdc - get an ethernet-over-usb link host address
+ * @net: device representing this link
+ * @host_addr: place to store eth address of the host
+ * @len: length of the @host_addr buffer
+ *
+ * This gets the CDC formatted host-side Ethernet address of this
+ * ethernet-over-usb link.
+ * Returns zero on success, else negative errno.
+ */
+int gether_get_host_addr_cdc(struct net_device *net, char *host_addr, int len);
+
+/**
+ * gether_get_host_addr_u8 - get an ethernet-over-usb link host address
+ * @net: device representing this link
+ * @host_mac: place to store the eth address of the host
+ *
+ * This gets the binary formatted host-side Ethernet address of this
+ * ethernet-over-usb link.
+ */
+void gether_get_host_addr_u8(struct net_device *net, u8 host_mac[ETH_ALEN]);
+
+/**
+ * gether_set_qmult - initialize an ethernet-over-usb link with a multiplier
+ * @net: device representing this link
+ * @qmult: queue multiplier
+ *
+ * This sets the queue length multiplier of this ethernet-over-usb link.
+ * For higher speeds use longer queues.
+ */
+void gether_set_qmult(struct net_device *net, unsigned qmult);
+
+/**
+ * gether_get_qmult - get an ethernet-over-usb link multiplier
+ * @net: device representing this link
+ *
+ * This gets the queue length multiplier of this ethernet-over-usb link.
+ */
+unsigned gether_get_qmult(struct net_device *net);
+
+/**
+ * gether_get_ifname - get an ethernet-over-usb link interface name
+ * @net: device representing this link
+ * @name: place to store the interface name
+ * @len: length of the @name buffer
+ *
+ * This gets the interface name of this ethernet-over-usb link.
+ * Returns zero on success, else negative errno.
+ */
+int gether_get_ifname(struct net_device *net, char *name, int len);
+
+void gether_cleanup(struct eth_dev *dev);
+
+/* connect/disconnect is handled by individual functions */
+struct net_device *gether_connect(struct gether *);
+void gether_disconnect(struct gether *);
+
+/* Some controllers can't support CDC Ethernet (ECM) ... */
+static inline bool can_support_ecm(struct usb_gadget *gadget)
+{
+ if (!gadget_supports_altsettings(gadget))
+ return false;
+
+ /* Everything else is *presumably* fine ... but this is a bit
+ * chancy, so be **CERTAIN** there are no hardware issues with
+ * your controller. Add it above if it can't handle CDC.
+ */
+ return true;
+}
+
+#endif /* __U_ETHER_H */
Code Review / kvmfornfv.git / blobdiff