#include <linux/dma-mapping.h>
#include <linux/of.h>
#include <linux/acpi.h>
+#include <linux/pinctrl/consumer.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
return 0;
}
+/**
+ * dwc3_soft_reset - Issue soft reset
+ * @dwc: Pointer to our controller context structure
+ */
+static int dwc3_soft_reset(struct dwc3 *dwc)
+{
+ unsigned long timeout;
+ u32 reg;
+
+ timeout = jiffies + msecs_to_jiffies(500);
+ dwc3_writel(dwc->regs, DWC3_DCTL, DWC3_DCTL_CSFTRST);
+ do {
+ reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+ if (!(reg & DWC3_DCTL_CSFTRST))
+ break;
+
+ if (time_after(jiffies, timeout)) {
+ dev_err(dwc->dev, "Reset Timed Out\n");
+ return -ETIMEDOUT;
+ }
+
+ cpu_relax();
+ } while (true);
+
+ return 0;
+}
+
+/*
+ * dwc3_frame_length_adjustment - Adjusts frame length if required
+ * @dwc3: Pointer to our controller context structure
+ * @fladj: Value of GFLADJ_30MHZ to adjust frame length
+ */
+static void dwc3_frame_length_adjustment(struct dwc3 *dwc, u32 fladj)
+{
+ u32 reg;
+ u32 dft;
+
+ if (dwc->revision < DWC3_REVISION_250A)
+ return;
+
+ if (fladj == 0)
+ return;
+
+ reg = dwc3_readl(dwc->regs, DWC3_GFLADJ);
+ dft = reg & DWC3_GFLADJ_30MHZ_MASK;
+ if (!dev_WARN_ONCE(dwc->dev, dft == fladj,
+ "request value same as default, ignoring\n")) {
+ reg &= ~DWC3_GFLADJ_30MHZ_MASK;
+ reg |= DWC3_GFLADJ_30MHZ_SDBND_SEL | fladj;
+ dwc3_writel(dwc->regs, DWC3_GFLADJ, reg);
+ }
+}
+
/**
* dwc3_free_one_event_buffer - Frees one event buffer
* @dwc: Pointer to our controller context structure
/**
* dwc3_phy_setup - Configure USB PHY Interface of DWC3 Core
* @dwc: Pointer to our controller context structure
+ *
+ * Returns 0 on success. The USB PHY interfaces are configured but not
+ * initialized. The PHY interfaces and the PHYs get initialized together with
+ * the core in dwc3_core_init.
*/
-static void dwc3_phy_setup(struct dwc3 *dwc)
+static int dwc3_phy_setup(struct dwc3 *dwc)
{
u32 reg;
+ int ret;
reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
- mdelay(100);
-
reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
+ /* Select the HS PHY interface */
+ switch (DWC3_GHWPARAMS3_HSPHY_IFC(dwc->hwparams.hwparams3)) {
+ case DWC3_GHWPARAMS3_HSPHY_IFC_UTMI_ULPI:
+ if (dwc->hsphy_interface &&
+ !strncmp(dwc->hsphy_interface, "utmi", 4)) {
+ reg &= ~DWC3_GUSB2PHYCFG_ULPI_UTMI;
+ break;
+ } else if (dwc->hsphy_interface &&
+ !strncmp(dwc->hsphy_interface, "ulpi", 4)) {
+ reg |= DWC3_GUSB2PHYCFG_ULPI_UTMI;
+ dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+ } else {
+ /* Relying on default value. */
+ if (!(reg & DWC3_GUSB2PHYCFG_ULPI_UTMI))
+ break;
+ }
+ /* FALLTHROUGH */
+ case DWC3_GHWPARAMS3_HSPHY_IFC_ULPI:
+ /* Making sure the interface and PHY are operational */
+ ret = dwc3_soft_reset(dwc);
+ if (ret)
+ return ret;
+
+ udelay(1);
+
+ ret = dwc3_ulpi_init(dwc);
+ if (ret)
+ return ret;
+ /* FALLTHROUGH */
+ default:
+ break;
+ }
+
/*
* Above 1.94a, it is recommended to set DWC3_GUSB2PHYCFG_SUSPHY to
* '0' during coreConsultant configuration. So default value will
if (dwc->dis_u2_susphy_quirk)
reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
+ if (dwc->dis_enblslpm_quirk)
+ reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM;
+
dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
- mdelay(100);
+ return 0;
}
/**
*/
static int dwc3_core_init(struct dwc3 *dwc)
{
- unsigned long timeout;
u32 hwparams4 = dwc->hwparams.hwparams4;
u32 reg;
int ret;
reg = dwc3_readl(dwc->regs, DWC3_GSNPSID);
/* This should read as U3 followed by revision number */
- if ((reg & DWC3_GSNPSID_MASK) != 0x55330000) {
+ if ((reg & DWC3_GSNPSID_MASK) == 0x55330000) {
+ /* Detected DWC_usb3 IP */
+ dwc->revision = reg;
+ } else if ((reg & DWC3_GSNPSID_MASK) == 0x33310000) {
+ /* Detected DWC_usb31 IP */
+ dwc->revision = dwc3_readl(dwc->regs, DWC3_VER_NUMBER);
+ dwc->revision |= DWC3_REVISION_IS_DWC31;
+ } else {
dev_err(dwc->dev, "this is not a DesignWare USB3 DRD Core\n");
ret = -ENODEV;
goto err0;
}
- dwc->revision = reg;
/*
* Write Linux Version Code to our GUID register so it's easy to figure
}
/* issue device SoftReset too */
- timeout = jiffies + msecs_to_jiffies(500);
- dwc3_writel(dwc->regs, DWC3_DCTL, DWC3_DCTL_CSFTRST);
- do {
- reg = dwc3_readl(dwc->regs, DWC3_DCTL);
- if (!(reg & DWC3_DCTL_CSFTRST))
- break;
-
- if (time_after(jiffies, timeout)) {
- dev_err(dwc->dev, "Reset Timed Out\n");
- ret = -ETIMEDOUT;
- goto err0;
- }
-
- cpu_relax();
- } while (true);
+ ret = dwc3_soft_reset(dwc);
+ if (ret)
+ goto err0;
ret = dwc3_core_soft_reset(dwc);
if (ret)
dwc3_writel(dwc->regs, DWC3_GCTL, reg);
- dwc3_phy_setup(dwc);
-
ret = dwc3_alloc_scratch_buffers(dwc);
if (ret)
goto err1;
{
struct device *dev = &pdev->dev;
struct dwc3_platform_data *pdata = dev_get_platdata(dev);
- struct device_node *node = dev->of_node;
struct resource *res;
struct dwc3 *dwc;
u8 lpm_nyet_threshold;
u8 tx_de_emphasis;
u8 hird_threshold;
+ u32 fladj = 0;
int ret;
*/
hird_threshold = 12;
- if (node) {
- dwc->maximum_speed = of_usb_get_maximum_speed(node);
- dwc->has_lpm_erratum = of_property_read_bool(node,
+ dwc->maximum_speed = usb_get_maximum_speed(dev);
+ dwc->dr_mode = usb_get_dr_mode(dev);
+
+ dwc->has_lpm_erratum = device_property_read_bool(dev,
"snps,has-lpm-erratum");
- of_property_read_u8(node, "snps,lpm-nyet-threshold",
+ device_property_read_u8(dev, "snps,lpm-nyet-threshold",
&lpm_nyet_threshold);
- dwc->is_utmi_l1_suspend = of_property_read_bool(node,
+ dwc->is_utmi_l1_suspend = device_property_read_bool(dev,
"snps,is-utmi-l1-suspend");
- of_property_read_u8(node, "snps,hird-threshold",
+ device_property_read_u8(dev, "snps,hird-threshold",
&hird_threshold);
- dwc->usb3_lpm_capable = of_property_read_bool(node,
+ dwc->usb3_lpm_capable = device_property_read_bool(dev,
"snps,usb3_lpm_capable");
- dwc->needs_fifo_resize = of_property_read_bool(node,
+ dwc->needs_fifo_resize = device_property_read_bool(dev,
"tx-fifo-resize");
- dwc->dr_mode = of_usb_get_dr_mode(node);
- dwc->disable_scramble_quirk = of_property_read_bool(node,
+ dwc->disable_scramble_quirk = device_property_read_bool(dev,
"snps,disable_scramble_quirk");
- dwc->u2exit_lfps_quirk = of_property_read_bool(node,
+ dwc->u2exit_lfps_quirk = device_property_read_bool(dev,
"snps,u2exit_lfps_quirk");
- dwc->u2ss_inp3_quirk = of_property_read_bool(node,
+ dwc->u2ss_inp3_quirk = device_property_read_bool(dev,
"snps,u2ss_inp3_quirk");
- dwc->req_p1p2p3_quirk = of_property_read_bool(node,
+ dwc->req_p1p2p3_quirk = device_property_read_bool(dev,
"snps,req_p1p2p3_quirk");
- dwc->del_p1p2p3_quirk = of_property_read_bool(node,
+ dwc->del_p1p2p3_quirk = device_property_read_bool(dev,
"snps,del_p1p2p3_quirk");
- dwc->del_phy_power_chg_quirk = of_property_read_bool(node,
+ dwc->del_phy_power_chg_quirk = device_property_read_bool(dev,
"snps,del_phy_power_chg_quirk");
- dwc->lfps_filter_quirk = of_property_read_bool(node,
+ dwc->lfps_filter_quirk = device_property_read_bool(dev,
"snps,lfps_filter_quirk");
- dwc->rx_detect_poll_quirk = of_property_read_bool(node,
+ dwc->rx_detect_poll_quirk = device_property_read_bool(dev,
"snps,rx_detect_poll_quirk");
- dwc->dis_u3_susphy_quirk = of_property_read_bool(node,
+ dwc->dis_u3_susphy_quirk = device_property_read_bool(dev,
"snps,dis_u3_susphy_quirk");
- dwc->dis_u2_susphy_quirk = of_property_read_bool(node,
+ dwc->dis_u2_susphy_quirk = device_property_read_bool(dev,
"snps,dis_u2_susphy_quirk");
+ dwc->dis_enblslpm_quirk = device_property_read_bool(dev,
+ "snps,dis_enblslpm_quirk");
- dwc->tx_de_emphasis_quirk = of_property_read_bool(node,
+ dwc->tx_de_emphasis_quirk = device_property_read_bool(dev,
"snps,tx_de_emphasis_quirk");
- of_property_read_u8(node, "snps,tx_de_emphasis",
+ device_property_read_u8(dev, "snps,tx_de_emphasis",
&tx_de_emphasis);
- } else if (pdata) {
+ device_property_read_string(dev, "snps,hsphy_interface",
+ &dwc->hsphy_interface);
+ device_property_read_u32(dev, "snps,quirk-frame-length-adjustment",
+ &fladj);
+
+ if (pdata) {
dwc->maximum_speed = pdata->maximum_speed;
dwc->has_lpm_erratum = pdata->has_lpm_erratum;
if (pdata->lpm_nyet_threshold)
dwc->rx_detect_poll_quirk = pdata->rx_detect_poll_quirk;
dwc->dis_u3_susphy_quirk = pdata->dis_u3_susphy_quirk;
dwc->dis_u2_susphy_quirk = pdata->dis_u2_susphy_quirk;
+ dwc->dis_enblslpm_quirk = pdata->dis_enblslpm_quirk;
dwc->tx_de_emphasis_quirk = pdata->tx_de_emphasis_quirk;
if (pdata->tx_de_emphasis)
tx_de_emphasis = pdata->tx_de_emphasis;
+
+ dwc->hsphy_interface = pdata->hsphy_interface;
+ fladj = pdata->fladj_value;
}
/* default to superspeed if no maximum_speed passed */
dwc->hird_threshold = hird_threshold
| (dwc->is_utmi_l1_suspend << 4);
+ platform_set_drvdata(pdev, dwc);
+ dwc3_cache_hwparams(dwc);
+
+ ret = dwc3_phy_setup(dwc);
+ if (ret)
+ goto err0;
+
ret = dwc3_core_get_phy(dwc);
if (ret)
goto err0;
spin_lock_init(&dwc->lock);
- platform_set_drvdata(pdev, dwc);
if (!dev->dma_mask) {
dev->dma_mask = dev->parent->dma_mask;
pm_runtime_get_sync(dev);
pm_runtime_forbid(dev);
- dwc3_cache_hwparams(dwc);
-
ret = dwc3_alloc_event_buffers(dwc, DWC3_EVENT_BUFFERS_SIZE);
if (ret) {
dev_err(dwc->dev, "failed to allocate event buffers\n");
goto err1;
}
+ /* Adjust Frame Length */
+ dwc3_frame_length_adjustment(dwc, fladj);
+
usb_phy_set_suspend(dwc->usb2_phy, 0);
usb_phy_set_suspend(dwc->usb3_phy, 0);
ret = phy_power_on(dwc->usb2_generic_phy);
err1:
dwc3_free_event_buffers(dwc);
+ dwc3_ulpi_exit(dwc);
err0:
/*
phy_power_off(dwc->usb3_generic_phy);
dwc3_core_exit(dwc);
+ dwc3_ulpi_exit(dwc);
pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
phy_exit(dwc->usb2_generic_phy);
phy_exit(dwc->usb3_generic_phy);
+ pinctrl_pm_select_sleep_state(dev);
+
return 0;
}
unsigned long flags;
int ret;
+ pinctrl_pm_select_default_state(dev);
+
usb_phy_init(dwc->usb3_phy);
usb_phy_init(dwc->usb2_phy);
ret = phy_init(dwc->usb2_generic_phy);
Code Review / kvmfornfv.git / blobdiff