static void hub_release(struct kref *kref);
static int usb_reset_and_verify_device(struct usb_device *udev);
+static int hub_port_disable(struct usb_hub *hub, int port1, int set_state);
static inline char *portspeed(struct usb_hub *hub, int portstatus)
{
unsigned int hub_u1_del;
unsigned int hub_u2_del;
- if (!udev->lpm_capable || udev->speed != USB_SPEED_SUPER)
+ if (!udev->lpm_capable || udev->speed < USB_SPEED_SUPER)
return;
hub = usb_hub_to_struct_hub(udev->parent);
USB_PORT_FEAT_LINK_STATE);
}
-/*
- * If USB 3.0 ports are placed into the Disabled state, they will no longer
- * detect any device connects or disconnects. This is generally not what the
- * USB core wants, since it expects a disabled port to produce a port status
- * change event when a new device connects.
- *
- * Instead, set the link state to Disabled, wait for the link to settle into
- * that state, clear any change bits, and then put the port into the RxDetect
- * state.
- */
-static int hub_usb3_port_disable(struct usb_hub *hub, int port1)
-{
- int ret;
- int total_time;
- u16 portchange, portstatus;
-
- if (!hub_is_superspeed(hub->hdev))
- return -EINVAL;
-
- ret = hub_port_status(hub, port1, &portstatus, &portchange);
- if (ret < 0)
- return ret;
-
- /*
- * USB controller Advanced Micro Devices, Inc. [AMD] FCH USB XHCI
- * Controller [1022:7814] will have spurious result making the following
- * usb 3.0 device hotplugging route to the 2.0 root hub and recognized
- * as high-speed device if we set the usb 3.0 port link state to
- * Disabled. Since it's already in USB_SS_PORT_LS_RX_DETECT state, we
- * check the state here to avoid the bug.
- */
- if ((portstatus & USB_PORT_STAT_LINK_STATE) ==
- USB_SS_PORT_LS_RX_DETECT) {
- dev_dbg(&hub->ports[port1 - 1]->dev,
- "Not disabling port; link state is RxDetect\n");
- return ret;
- }
-
- ret = hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_SS_DISABLED);
- if (ret)
- return ret;
-
- /* Wait for the link to enter the disabled state. */
- for (total_time = 0; ; total_time += HUB_DEBOUNCE_STEP) {
- ret = hub_port_status(hub, port1, &portstatus, &portchange);
- if (ret < 0)
- return ret;
-
- if ((portstatus & USB_PORT_STAT_LINK_STATE) ==
- USB_SS_PORT_LS_SS_DISABLED)
- break;
- if (total_time >= HUB_DEBOUNCE_TIMEOUT)
- break;
- msleep(HUB_DEBOUNCE_STEP);
- }
- if (total_time >= HUB_DEBOUNCE_TIMEOUT)
- dev_warn(&hub->ports[port1 - 1]->dev,
- "Could not disable after %d ms\n", total_time);
-
- return hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_RX_DETECT);
-}
-
-static int hub_port_disable(struct usb_hub *hub, int port1, int set_state)
-{
- struct usb_port *port_dev = hub->ports[port1 - 1];
- struct usb_device *hdev = hub->hdev;
- int ret = 0;
-
- if (port_dev->child && set_state)
- usb_set_device_state(port_dev->child, USB_STATE_NOTATTACHED);
- if (!hub->error) {
- if (hub_is_superspeed(hub->hdev))
- ret = hub_usb3_port_disable(hub, port1);
- else
- ret = usb_clear_port_feature(hdev, port1,
- USB_PORT_FEAT_ENABLE);
- }
- if (ret && ret != -ENODEV)
- dev_err(&port_dev->dev, "cannot disable (err = %d)\n", ret);
- return ret;
-}
-
/*
* Disable a port and mark a logical connect-change event, so that some
* time later hub_wq will disconnect() any existing usb_device on the port
/* Continue a partial initialization */
if (type == HUB_INIT2 || type == HUB_INIT3) {
- device_lock(hub->intfdev);
+ device_lock(&hdev->dev);
/* Was the hub disconnected while we were waiting? */
- if (hub->disconnected) {
- device_unlock(hub->intfdev);
- kref_put(&hub->kref, hub_release);
- return;
- }
+ if (hub->disconnected)
+ goto disconnected;
if (type == HUB_INIT2)
goto init2;
goto init3;
queue_delayed_work(system_power_efficient_wq,
&hub->init_work,
msecs_to_jiffies(delay));
- device_unlock(hub->intfdev);
+ device_unlock(&hdev->dev);
return; /* Continues at init3: below */
} else {
msleep(delay);
/* Scan all ports that need attention */
kick_hub_wq(hub);
- /* Allow autosuspend if it was suppressed */
- if (type <= HUB_INIT3)
+ if (type == HUB_INIT2 || type == HUB_INIT3) {
+ /* Allow autosuspend if it was suppressed */
+ disconnected:
usb_autopm_put_interface_async(to_usb_interface(hub->intfdev));
-
- if (type == HUB_INIT2 || type == HUB_INIT3)
- device_unlock(hub->intfdev);
+ device_unlock(&hdev->dev);
+ }
kref_put(&hub->kref, hub_release);
}
struct usb_device *hdev = hub->hdev;
int i;
- cancel_delayed_work_sync(&hub->init_work);
-
/* hub_wq and related activity won't re-trigger */
hub->quiescing = 1;
*/
static bool use_new_scheme(struct usb_device *udev, int retry)
{
- if (udev->speed == USB_SPEED_SUPER)
+ if (udev->speed >= USB_SPEED_SUPER)
return false;
return USE_NEW_SCHEME(retry);
struct usb_hcd *hcd;
if (!udev || !udev->parent ||
- udev->speed != USB_SPEED_SUPER ||
+ udev->speed < USB_SPEED_SUPER ||
!udev->lpm_capable ||
udev->state < USB_STATE_DEFAULT)
return 0;
struct usb_hcd *hcd;
if (!udev || !udev->parent ||
- udev->speed != USB_SPEED_SUPER ||
+ udev->speed < USB_SPEED_SUPER ||
!udev->lpm_capable ||
udev->state < USB_STATE_DEFAULT)
return;
}
EXPORT_SYMBOL_GPL(usb_unlocked_enable_lpm);
+/* usb3 devices use U3 for disabled, make sure remote wakeup is disabled */
+static void hub_usb3_port_prepare_disable(struct usb_hub *hub,
+ struct usb_port *port_dev)
+{
+ struct usb_device *udev = port_dev->child;
+ int ret;
+
+ if (udev && udev->port_is_suspended && udev->do_remote_wakeup) {
+ ret = hub_set_port_link_state(hub, port_dev->portnum,
+ USB_SS_PORT_LS_U0);
+ if (!ret) {
+ msleep(USB_RESUME_TIMEOUT);
+ ret = usb_disable_remote_wakeup(udev);
+ }
+ if (ret)
+ dev_warn(&udev->dev,
+ "Port disable: can't disable remote wake\n");
+ udev->do_remote_wakeup = 0;
+ }
+}
#else /* CONFIG_PM */
#define hub_resume NULL
#define hub_reset_resume NULL
+static inline void hub_usb3_port_prepare_disable(struct usb_hub *hub,
+ struct usb_port *port_dev) { }
+
int usb_disable_lpm(struct usb_device *udev)
{
return 0;
#endif /* CONFIG_PM */
+/*
+ * USB-3 does not have a similar link state as USB-2 that will avoid negotiating
+ * a connection with a plugged-in cable but will signal the host when the cable
+ * is unplugged. Disable remote wake and set link state to U3 for USB-3 devices
+ */
+static int hub_port_disable(struct usb_hub *hub, int port1, int set_state)
+{
+ struct usb_port *port_dev = hub->ports[port1 - 1];
+ struct usb_device *hdev = hub->hdev;
+ int ret = 0;
+
+ if (!hub->error) {
+ if (hub_is_superspeed(hub->hdev)) {
+ hub_usb3_port_prepare_disable(hub, port_dev);
+ ret = hub_set_port_link_state(hub, port_dev->portnum,
+ USB_SS_PORT_LS_U3);
+ } else {
+ ret = usb_clear_port_feature(hdev, port1,
+ USB_PORT_FEAT_ENABLE);
+ }
+ }
+ if (port_dev->child && set_state)
+ usb_set_device_state(port_dev->child, USB_STATE_NOTATTACHED);
+ if (ret && ret != -ENODEV)
+ dev_err(&port_dev->dev, "cannot disable (err = %d)\n", ret);
+ return ret;
+}
+
/* USB 2.0 spec, 7.1.7.3 / fig 7-29:
*
{
struct usb_device *hdev = hub->hdev;
struct usb_hcd *hcd = bus_to_hcd(hdev->bus);
- int i, j, retval;
+ int retries, operations, retval, i;
unsigned delay = HUB_SHORT_RESET_TIME;
enum usb_device_speed oldspeed = udev->speed;
const char *speed;
retval = -ENODEV;
- if (oldspeed != USB_SPEED_UNKNOWN && oldspeed != udev->speed) {
+ /* Don't allow speed changes at reset, except usb 3.0 to faster */
+ if (oldspeed != USB_SPEED_UNKNOWN && oldspeed != udev->speed &&
+ !(oldspeed == USB_SPEED_SUPER && udev->speed > oldspeed)) {
dev_dbg(&udev->dev, "device reset changed speed!\n");
goto fail;
}
* reported as 0xff in the device descriptor). WUSB1.0[4.8.1].
*/
switch (udev->speed) {
+ case USB_SPEED_SUPER_PLUS:
case USB_SPEED_SUPER:
case USB_SPEED_WIRELESS: /* fixed at 512 */
udev->ep0.desc.wMaxPacketSize = cpu_to_le16(512);
else
speed = usb_speed_string(udev->speed);
- if (udev->speed != USB_SPEED_SUPER)
+ if (udev->speed < USB_SPEED_SUPER)
dev_info(&udev->dev,
"%s %s USB device number %d using %s\n",
(udev->config) ? "reset" : "new", speed,
* first 8 bytes of the device descriptor to get the ep0 maxpacket
* value.
*/
- for (i = 0; i < GET_DESCRIPTOR_TRIES; (++i, msleep(100))) {
+ for (retries = 0; retries < GET_DESCRIPTOR_TRIES; (++retries, msleep(100))) {
bool did_new_scheme = false;
if (use_new_scheme(udev, retry_counter)) {
* 255 is for WUSB devices, we actually need to use
* 512 (WUSB1.0[4.8.1]).
*/
- for (j = 0; j < 3; ++j) {
+ for (operations = 0; operations < 3; ++operations) {
buf->bMaxPacketSize0 = 0;
r = usb_control_msg(udev, usb_rcvaddr0pipe(),
USB_REQ_GET_DESCRIPTOR, USB_DIR_IN,
r = -EPROTO;
break;
}
- if (r == 0)
+ /*
+ * Some devices time out if they are powered on
+ * when already connected. They need a second
+ * reset. But only on the first attempt,
+ * lest we get into a time out/reset loop
+ */
+ if (r == 0 || (r == -ETIMEDOUT && retries == 0))
break;
}
udev->descriptor.bMaxPacketSize0 =
* authorization will assign the final address.
*/
if (udev->wusb == 0) {
- for (j = 0; j < SET_ADDRESS_TRIES; ++j) {
+ for (operations = 0; operations < SET_ADDRESS_TRIES; ++operations) {
retval = hub_set_address(udev, devnum);
if (retval >= 0)
break;
devnum, retval);
goto fail;
}
- if (udev->speed == USB_SPEED_SUPER) {
+ if (udev->speed >= USB_SPEED_SUPER) {
devnum = udev->devnum;
dev_info(&udev->dev,
- "%s SuperSpeed USB device number %d using %s\n",
+ "%s SuperSpeed%s USB device number %d using %s\n",
(udev->config) ? "reset" : "new",
+ (udev->speed == USB_SPEED_SUPER_PLUS) ? "Plus" : "",
devnum, udev->bus->controller->driver->name);
}
* got from those devices show they aren't superspeed devices. Warm
* reset the port attached by the devices can fix them.
*/
- if ((udev->speed == USB_SPEED_SUPER) &&
+ if ((udev->speed >= USB_SPEED_SUPER) &&
(le16_to_cpu(udev->descriptor.bcdUSB) < 0x0300)) {
dev_err(&udev->dev, "got a wrong device descriptor, "
"warm reset device\n");
}
if (udev->descriptor.bMaxPacketSize0 == 0xff ||
- udev->speed == USB_SPEED_SUPER)
+ udev->speed >= USB_SPEED_SUPER)
i = 512;
else
i = udev->descriptor.bMaxPacketSize0;
udev->level = hdev->level + 1;
udev->wusb = hub_is_wusb(hub);
- /* Only USB 3.0 devices are connected to SuperSpeed hubs. */
+ /* Devices connected to SuperSpeed hubs are USB 3.0 or later */
if (hub_is_superspeed(hub->hdev))
udev->speed = USB_SPEED_SUPER;
else
}
bos = udev->bos;
+ udev->bos = NULL;
for (i = 0; i < SET_CONFIG_TRIES; ++i) {
usb_set_usb2_hardware_lpm(udev, 1);
usb_unlocked_enable_lpm(udev);
usb_enable_ltm(udev);
- /* release the new BOS descriptor allocated by hub_port_init() */
- if (udev->bos != bos) {
- usb_release_bos_descriptor(udev);
- udev->bos = bos;
- }
+ usb_release_bos_descriptor(udev);
+ udev->bos = bos;
return 0;
re_enumerate:
Code Review / kvmfornfv.git / blobdiff