#include <linux/serial_core.h>
#include "8250.h"
-#define ADDR_PORT 0x4E
-#define DATA_PORT 0x4F
-#define ENTRY_KEY 0x77
+#define ADDR_PORT 0
+#define DATA_PORT 1
#define EXIT_KEY 0xAA
#define CHIP_ID1 0x20
-#define CHIP_ID1_VAL 0x02
#define CHIP_ID2 0x21
-#define CHIP_ID2_VAL 0x16
+#define CHIP_ID_0 0x1602
+#define CHIP_ID_1 0x0501
#define VENDOR_ID1 0x23
#define VENDOR_ID1_VAL 0x19
#define VENDOR_ID2 0x24
#define VENDOR_ID2_VAL 0x34
+#define IO_ADDR1 0x61
+#define IO_ADDR2 0x60
#define LDN 0x7
#define RS485 0xF0
#define DRIVER_NAME "8250_fintek"
-static int fintek_8250_enter_key(void){
+struct fintek_8250 {
+ u16 base_port;
+ u8 index;
+ u8 key;
+ long line;
+};
+
+static int fintek_8250_enter_key(u16 base_port, u8 key)
+{
- if (!request_muxed_region(ADDR_PORT, 2, DRIVER_NAME))
+ if (!request_muxed_region(base_port, 2, DRIVER_NAME))
return -EBUSY;
- outb(ENTRY_KEY, ADDR_PORT);
- outb(ENTRY_KEY, ADDR_PORT);
+ outb(key, base_port + ADDR_PORT);
+ outb(key, base_port + ADDR_PORT);
return 0;
}
-static void fintek_8250_exit_key(void){
-
- outb(EXIT_KEY, ADDR_PORT);
- release_region(ADDR_PORT, 2);
-}
-
-static int fintek_8250_get_index(resource_size_t base_addr)
+static void fintek_8250_exit_key(u16 base_port)
{
- resource_size_t base[] = {0x3f8, 0x2f8, 0x3e8, 0x2e8};
- int i;
-
- for (i = 0; i < ARRAY_SIZE(base); i++)
- if (base_addr == base[i])
- return i;
- return -ENODEV;
+ outb(EXIT_KEY, base_port + ADDR_PORT);
+ release_region(base_port + ADDR_PORT, 2);
}
-static int fintek_8250_check_id(void)
+static int fintek_8250_check_id(u16 base_port)
{
+ u16 chip;
- outb(CHIP_ID1, ADDR_PORT);
- if (inb(DATA_PORT) != CHIP_ID1_VAL)
+ outb(VENDOR_ID1, base_port + ADDR_PORT);
+ if (inb(base_port + DATA_PORT) != VENDOR_ID1_VAL)
return -ENODEV;
- outb(CHIP_ID2, ADDR_PORT);
- if (inb(DATA_PORT) != CHIP_ID2_VAL)
+ outb(VENDOR_ID2, base_port + ADDR_PORT);
+ if (inb(base_port + DATA_PORT) != VENDOR_ID2_VAL)
return -ENODEV;
- outb(VENDOR_ID1, ADDR_PORT);
- if (inb(DATA_PORT) != VENDOR_ID1_VAL)
- return -ENODEV;
+ outb(CHIP_ID1, base_port + ADDR_PORT);
+ chip = inb(base_port + DATA_PORT);
+ outb(CHIP_ID2, base_port + ADDR_PORT);
+ chip |= inb(base_port + DATA_PORT) << 8;
- outb(VENDOR_ID2, ADDR_PORT);
- if (inb(DATA_PORT) != VENDOR_ID2_VAL)
+ if (chip != CHIP_ID_0 && chip != CHIP_ID_1)
return -ENODEV;
return 0;
struct serial_rs485 *rs485)
{
uint8_t config = 0;
- int index = fintek_8250_get_index(port->iobase);
+ struct fintek_8250 *pdata = port->private_data;
- if (index < 0)
+ if (!pdata)
return -EINVAL;
if (rs485->flags & SER_RS485_ENABLED)
if (rs485->flags & SER_RS485_RTS_ON_SEND)
config |= RTS_INVERT;
- if (fintek_8250_enter_key())
+ if (fintek_8250_enter_key(pdata->base_port, pdata->key))
return -EBUSY;
- outb(LDN, ADDR_PORT);
- outb(index, DATA_PORT);
- outb(RS485, ADDR_PORT);
- outb(config, DATA_PORT);
- fintek_8250_exit_key();
+ outb(LDN, pdata->base_port + ADDR_PORT);
+ outb(pdata->index, pdata->base_port + DATA_PORT);
+ outb(RS485, pdata->base_port + ADDR_PORT);
+ outb(config, pdata->base_port + DATA_PORT);
+ fintek_8250_exit_key(pdata->base_port);
port->rs485 = *rs485;
return 0;
}
+static int fintek_8250_base_port(u16 io_address, u8 *key, u8 *index)
+{
+ static const u16 addr[] = {0x4e, 0x2e};
+ static const u8 keys[] = {0x77, 0xa0, 0x87, 0x67};
+ int i, j, k;
+
+ for (i = 0; i < ARRAY_SIZE(addr); i++) {
+ for (j = 0; j < ARRAY_SIZE(keys); j++) {
+
+ if (fintek_8250_enter_key(addr[i], keys[j]))
+ continue;
+ if (fintek_8250_check_id(addr[i])) {
+ fintek_8250_exit_key(addr[i]);
+ continue;
+ }
+
+ for (k = 0; k < 4; k++) {
+ u16 aux;
+
+ outb(LDN, addr[i] + ADDR_PORT);
+ outb(k, addr[i] + DATA_PORT);
+
+ outb(IO_ADDR1, addr[i] + ADDR_PORT);
+ aux = inb(addr[i] + DATA_PORT);
+ outb(IO_ADDR2, addr[i] + ADDR_PORT);
+ aux |= inb(addr[i] + DATA_PORT) << 8;
+ if (aux != io_address)
+ continue;
+
+ fintek_8250_exit_key(addr[i]);
+ *key = keys[j];
+ *index = k;
+ return addr[i];
+ }
+ fintek_8250_exit_key(addr[i]);
+ }
+ }
+
+ return -ENODEV;
+}
+
static int
fintek_8250_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
{
- int line;
struct uart_8250_port uart;
- int ret;
+ struct fintek_8250 *pdata;
+ int base_port;
+ u8 key;
+ u8 index;
if (!pnp_port_valid(dev, 0))
return -ENODEV;
- if (fintek_8250_get_index(pnp_port_start(dev, 0)) < 0)
+ base_port = fintek_8250_base_port(pnp_port_start(dev, 0), &key, &index);
+ if (base_port < 0)
return -ENODEV;
- /* Enable configuration registers*/
- if (fintek_8250_enter_key())
- return -EBUSY;
+ memset(&uart, 0, sizeof(uart));
- /*Check ID*/
- ret = fintek_8250_check_id();
- fintek_8250_exit_key();
- if (ret)
- return ret;
+ pdata = devm_kzalloc(&dev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+ uart.port.private_data = pdata;
- memset(&uart, 0, sizeof(uart));
if (!pnp_irq_valid(dev, 0))
return -ENODEV;
uart.port.irq = pnp_irq(dev, 0);
uart.port.uartclk = 1843200;
uart.port.dev = &dev->dev;
- line = serial8250_register_8250_port(&uart);
- if (line < 0)
+ pdata->key = key;
+ pdata->base_port = base_port;
+ pdata->index = index;
+ pdata->line = serial8250_register_8250_port(&uart);
+ if (pdata->line < 0)
return -ENODEV;
- pnp_set_drvdata(dev, (void *)((long)line + 1));
+ pnp_set_drvdata(dev, pdata);
return 0;
}
static void fintek_8250_remove(struct pnp_dev *dev)
{
- long line = (long)pnp_get_drvdata(dev);
+ struct fintek_8250 *pdata = pnp_get_drvdata(dev);
- if (line)
- serial8250_unregister_port(line - 1);
+ if (pdata)
+ serial8250_unregister_port(pdata->line);
}
#ifdef CONFIG_PM
static int fintek_8250_suspend(struct pnp_dev *dev, pm_message_t state)
{
- long line = (long)pnp_get_drvdata(dev);
+ struct fintek_8250 *pdata = pnp_get_drvdata(dev);
- if (!line)
+ if (!pdata)
return -ENODEV;
- serial8250_suspend_port(line - 1);
+ serial8250_suspend_port(pdata->line);
return 0;
}
static int fintek_8250_resume(struct pnp_dev *dev)
{
- long line = (long)pnp_get_drvdata(dev);
+ struct fintek_8250 *pdata = pnp_get_drvdata(dev);
- if (!line)
+ if (!pdata)
return -ENODEV;
- serial8250_resume_port(line - 1);
+ serial8250_resume_port(pdata->line);
return 0;
}
#else
Code Review / kvmfornfv.git / blobdiff