#include <linux/module.h>
#include <asm/unaligned.h>
-#include <scsi/scsi.h>
+#include <scsi/scsi_proto.h>
+#include <scsi/scsi_common.h>
#include <scsi/scsi_tcq.h>
#include <target/target_core_base.h>
#include "target_core_ua.h"
#include "target_core_xcopy.h"
-static void spc_fill_alua_data(struct se_port *port, unsigned char *buf)
+static void spc_fill_alua_data(struct se_lun *lun, unsigned char *buf)
{
struct t10_alua_tg_pt_gp *tg_pt_gp;
- struct t10_alua_tg_pt_gp_member *tg_pt_gp_mem;
/*
* Set SCCS for MAINTENANCE_IN + REPORT_TARGET_PORT_GROUPS.
*
* See spc4r17 section 6.4.2 Table 135
*/
- if (!port)
- return;
- tg_pt_gp_mem = port->sep_alua_tg_pt_gp_mem;
- if (!tg_pt_gp_mem)
- return;
-
- spin_lock(&tg_pt_gp_mem->tg_pt_gp_mem_lock);
- tg_pt_gp = tg_pt_gp_mem->tg_pt_gp;
+ spin_lock(&lun->lun_tg_pt_gp_lock);
+ tg_pt_gp = lun->lun_tg_pt_gp;
if (tg_pt_gp)
buf[5] |= tg_pt_gp->tg_pt_gp_alua_access_type;
- spin_unlock(&tg_pt_gp_mem->tg_pt_gp_mem_lock);
+ spin_unlock(&lun->lun_tg_pt_gp_lock);
}
sense_reason_t
/*
* Enable SCCS and TPGS fields for Emulated ALUA
*/
- spc_fill_alua_data(lun->lun_sep, buf);
+ spc_fill_alua_data(lun, buf);
/*
* Set Third-Party Copy (3PC) bit to indicate support for EXTENDED_COPY
{
struct se_device *dev = cmd->se_dev;
struct se_lun *lun = cmd->se_lun;
- struct se_port *port = NULL;
struct se_portal_group *tpg = NULL;
struct t10_alua_lu_gp_member *lu_gp_mem;
struct t10_alua_tg_pt_gp *tg_pt_gp;
- struct t10_alua_tg_pt_gp_member *tg_pt_gp_mem;
unsigned char *prod = &dev->t10_wwn.model[0];
u32 prod_len;
u32 unit_serial_len, off = 0;
/* Header size for Designation descriptor */
len += (id_len + 4);
off += (id_len + 4);
- /*
- * struct se_port is only set for INQUIRY VPD=1 through $FABRIC_MOD
- */
- port = lun->lun_sep;
- if (port) {
+
+ if (1) {
struct t10_alua_lu_gp *lu_gp;
u32 padding, scsi_name_len, scsi_target_len;
u16 lu_gp_id = 0;
u16 tg_pt_gp_id = 0;
u16 tpgt;
- tpg = port->sep_tpg;
+ tpg = lun->lun_tpg;
/*
* Relative target port identifer, see spc4r17
* section 7.7.3.7
* Get the PROTOCOL IDENTIFIER as defined by spc4r17
* section 7.5.1 Table 362
*/
- buf[off] =
- (tpg->se_tpg_tfo->get_fabric_proto_ident(tpg) << 4);
+ buf[off] = tpg->proto_id << 4;
buf[off++] |= 0x1; /* CODE SET == Binary */
buf[off] = 0x80; /* Set PIV=1 */
/* Set ASSOCIATION == target port: 01b */
/* Skip over Obsolete field in RTPI payload
* in Table 472 */
off += 2;
- buf[off++] = ((port->sep_rtpi >> 8) & 0xff);
- buf[off++] = (port->sep_rtpi & 0xff);
+ buf[off++] = ((lun->lun_rtpi >> 8) & 0xff);
+ buf[off++] = (lun->lun_rtpi & 0xff);
len += 8; /* Header size + Designation descriptor */
/*
* Target port group identifier, see spc4r17
* Get the PROTOCOL IDENTIFIER as defined by spc4r17
* section 7.5.1 Table 362
*/
- tg_pt_gp_mem = port->sep_alua_tg_pt_gp_mem;
- if (!tg_pt_gp_mem)
- goto check_lu_gp;
-
- spin_lock(&tg_pt_gp_mem->tg_pt_gp_mem_lock);
- tg_pt_gp = tg_pt_gp_mem->tg_pt_gp;
+ spin_lock(&lun->lun_tg_pt_gp_lock);
+ tg_pt_gp = lun->lun_tg_pt_gp;
if (!tg_pt_gp) {
- spin_unlock(&tg_pt_gp_mem->tg_pt_gp_mem_lock);
+ spin_unlock(&lun->lun_tg_pt_gp_lock);
goto check_lu_gp;
}
tg_pt_gp_id = tg_pt_gp->tg_pt_gp_id;
- spin_unlock(&tg_pt_gp_mem->tg_pt_gp_mem_lock);
+ spin_unlock(&lun->lun_tg_pt_gp_lock);
- buf[off] =
- (tpg->se_tpg_tfo->get_fabric_proto_ident(tpg) << 4);
+ buf[off] = tpg->proto_id << 4;
buf[off++] |= 0x1; /* CODE SET == Binary */
buf[off] = 0x80; /* Set PIV=1 */
/* Set ASSOCIATION == target port: 01b */
* section 7.5.1 Table 362
*/
check_scsi_name:
- buf[off] =
- (tpg->se_tpg_tfo->get_fabric_proto_ident(tpg) << 4);
+ buf[off] = tpg->proto_id << 4;
buf[off++] |= 0x3; /* CODE SET == UTF-8 */
buf[off] = 0x80; /* Set PIV=1 */
/* Set ASSOCIATION == target port: 01b */
/*
* Target device designator
*/
- buf[off] =
- (tpg->se_tpg_tfo->get_fabric_proto_ident(tpg) << 4);
+ buf[off] = tpg->proto_id << 4;
buf[off++] |= 0x3; /* CODE SET == UTF-8 */
buf[off] = 0x80; /* Set PIV=1 */
/* Set ASSOCIATION == target device: 10b */
cmd->se_sess->sess_prot_type == TARGET_DIF_TYPE1_PROT)
buf[4] = 0x5;
else if (dev->dev_attrib.pi_prot_type == TARGET_DIF_TYPE3_PROT ||
- cmd->se_sess->sess_prot_type == TARGET_DIF_TYPE3_PROT)
+ cmd->se_sess->sess_prot_type == TARGET_DIF_TYPE3_PROT)
buf[4] = 0x4;
}
+ /* logical unit supports type 1 and type 3 protection */
+ if ((dev->transport->get_device_type(dev) == TYPE_DISK) &&
+ (sess->sup_prot_ops & (TARGET_PROT_DIN_PASS | TARGET_PROT_DOUT_PASS)) &&
+ (dev->dev_attrib.pi_prot_type || cmd->se_sess->sess_prot_type)) {
+ buf[4] |= (0x3 << 3);
+ }
+
/* Set HEADSUP, ORDSUP, SIMPSUP */
buf[5] = 0x07;
/* If WriteCache emulation is enabled, set V_SUP */
- if (se_dev_check_wce(dev))
+ if (target_check_wce(dev))
buf[6] = 0x01;
/* If an LBA map is present set R_SUP */
spin_lock(&cmd->se_dev->t10_alua.lba_map_lock);
spc_emulate_evpd_b0(struct se_cmd *cmd, unsigned char *buf)
{
struct se_device *dev = cmd->se_dev;
- int have_tp = 0;
- int opt, min;
+ u32 mtl = 0;
+ int have_tp = 0, opt, min;
/*
* Following spc3r22 section 6.5.3 Block Limits VPD page, when
/*
* Set MAXIMUM TRANSFER LENGTH
+ *
+ * XXX: Currently assumes single PAGE_SIZE per scatterlist for fabrics
+ * enforcing maximum HW scatter-gather-list entry limit
*/
- put_unaligned_be32(dev->dev_attrib.hw_max_sectors, &buf[8]);
+ if (cmd->se_tfo->max_data_sg_nents) {
+ mtl = (cmd->se_tfo->max_data_sg_nents * PAGE_SIZE) /
+ dev->dev_attrib.block_size;
+ }
+ put_unaligned_be32(min_not_zero(mtl, dev->dev_attrib.hw_max_sectors), &buf[8]);
/*
* Set OPTIMAL TRANSFER LENGTH
spc_emulate_inquiry(struct se_cmd *cmd)
{
struct se_device *dev = cmd->se_dev;
- struct se_portal_group *tpg = cmd->se_lun->lun_sep->sep_tpg;
+ struct se_portal_group *tpg = cmd->se_lun->lun_tpg;
unsigned char *rbuf;
unsigned char *cdb = cmd->t_task_cdb;
unsigned char *buf;
return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
}
- if (dev == tpg->tpg_virt_lun0.lun_se_dev)
+ if (dev == rcu_access_pointer(tpg->tpg_virt_lun0->lun_se_dev))
buf[0] = 0x3f; /* Not connected */
else
buf[0] = dev->transport->get_device_type(dev);
if (pc == 1)
goto out;
- p[2] = 2;
+ /* GLTSD: No implicit save of log parameters */
+ p[2] = (1 << 1);
+ if (target_sense_desc_format(dev))
+ /* D_SENSE: Descriptor format sense data for 64bit sectors */
+ p[2] |= (1 << 2);
+
/*
* From spc4r23, 7.4.7 Control mode page
*
if (pc == 1)
goto out;
- if (se_dev_check_wce(dev))
+ if (target_check_wce(dev))
p[2] = 0x04; /* Write Cache Enable */
p[12] = 0x20; /* Disabled Read Ahead */
int length = 0;
int ret;
int i;
+ bool read_only = target_lun_is_rdonly(cmd);;
memset(buf, 0, SE_MODE_PAGE_BUF);
length = ten ? 3 : 2;
/* DEVICE-SPECIFIC PARAMETER */
- if ((cmd->se_lun->lun_access & TRANSPORT_LUNFLAGS_READ_ONLY) ||
- (cmd->se_deve &&
- (cmd->se_deve->lun_flags & TRANSPORT_LUNFLAGS_READ_ONLY)))
+ if ((cmd->se_lun->lun_access & TRANSPORT_LUNFLAGS_READ_ONLY) || read_only)
spc_modesense_write_protect(&buf[length], type);
- if ((se_dev_check_wce(dev)) &&
- (dev->dev_attrib.emulate_fua_write > 0))
+ /*
+ * SBC only allows us to enable FUA and DPO together. Fortunately
+ * DPO is explicitly specified as a hint, so a noop is a perfectly
+ * valid implementation.
+ */
+ if (target_check_fua(dev))
spc_modesense_dpofua(&buf[length], type);
++length;
unsigned char *rbuf;
u8 ua_asc = 0, ua_ascq = 0;
unsigned char buf[SE_SENSE_BUF];
+ bool desc_format = target_sense_desc_format(cmd->se_dev);
memset(buf, 0, SE_SENSE_BUF);
if (!rbuf)
return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
- if (!core_scsi3_ua_clear_for_request_sense(cmd, &ua_asc, &ua_ascq)) {
- /*
- * CURRENT ERROR, UNIT ATTENTION
- */
- buf[0] = 0x70;
- buf[SPC_SENSE_KEY_OFFSET] = UNIT_ATTENTION;
-
- /*
- * The Additional Sense Code (ASC) from the UNIT ATTENTION
- */
- buf[SPC_ASC_KEY_OFFSET] = ua_asc;
- buf[SPC_ASCQ_KEY_OFFSET] = ua_ascq;
- buf[7] = 0x0A;
- } else {
- /*
- * CURRENT ERROR, NO SENSE
- */
- buf[0] = 0x70;
- buf[SPC_SENSE_KEY_OFFSET] = NO_SENSE;
-
- /*
- * NO ADDITIONAL SENSE INFORMATION
- */
- buf[SPC_ASC_KEY_OFFSET] = 0x00;
- buf[7] = 0x0A;
- }
+ if (!core_scsi3_ua_clear_for_request_sense(cmd, &ua_asc, &ua_ascq))
+ scsi_build_sense_buffer(desc_format, buf, UNIT_ATTENTION,
+ ua_asc, ua_ascq);
+ else
+ scsi_build_sense_buffer(desc_format, buf, NO_SENSE, 0x0, 0x0);
memcpy(rbuf, buf, min_t(u32, sizeof(buf), cmd->data_length));
transport_kunmap_data_sg(cmd);
{
struct se_dev_entry *deve;
struct se_session *sess = cmd->se_sess;
+ struct se_node_acl *nacl;
+ struct scsi_lun slun;
unsigned char *buf;
- u32 lun_count = 0, offset = 8, i;
-
- if (cmd->data_length < 16) {
- pr_warn("REPORT LUNS allocation length %u too small\n",
- cmd->data_length);
- return TCM_INVALID_CDB_FIELD;
- }
+ u32 lun_count = 0, offset = 8;
+ __be32 len;
buf = transport_kmap_data_sg(cmd);
- if (!buf)
+ if (cmd->data_length && !buf)
return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
/*
* coming via a target_core_mod PASSTHROUGH op, and not through
* a $FABRIC_MOD. In that case, report LUN=0 only.
*/
- if (!sess) {
- int_to_scsilun(0, (struct scsi_lun *)&buf[offset]);
- lun_count = 1;
+ if (!sess)
goto done;
- }
- spin_lock_irq(&sess->se_node_acl->device_list_lock);
- for (i = 0; i < TRANSPORT_MAX_LUNS_PER_TPG; i++) {
- deve = sess->se_node_acl->device_list[i];
- if (!(deve->lun_flags & TRANSPORT_LUNFLAGS_INITIATOR_ACCESS))
- continue;
+ nacl = sess->se_node_acl;
+
+ rcu_read_lock();
+ hlist_for_each_entry_rcu(deve, &nacl->lun_entry_hlist, link) {
/*
* We determine the correct LUN LIST LENGTH even once we
* have reached the initial allocation length.
* See SPC2-R20 7.19.
*/
lun_count++;
- if ((offset + 8) > cmd->data_length)
+ if (offset >= cmd->data_length)
continue;
- int_to_scsilun(deve->mapped_lun, (struct scsi_lun *)&buf[offset]);
+ int_to_scsilun(deve->mapped_lun, &slun);
+ memcpy(buf + offset, &slun,
+ min(8u, cmd->data_length - offset));
offset += 8;
}
- spin_unlock_irq(&sess->se_node_acl->device_list_lock);
+ rcu_read_unlock();
/*
* See SPC3 r07, page 159.
*/
done:
- lun_count *= 8;
- buf[0] = ((lun_count >> 24) & 0xff);
- buf[1] = ((lun_count >> 16) & 0xff);
- buf[2] = ((lun_count >> 8) & 0xff);
- buf[3] = (lun_count & 0xff);
- transport_kunmap_data_sg(cmd);
+ /*
+ * If no LUNs are accessible, report virtual LUN 0.
+ */
+ if (lun_count == 0) {
+ int_to_scsilun(0, &slun);
+ if (cmd->data_length > 8)
+ memcpy(buf + offset, &slun,
+ min(8u, cmd->data_length - offset));
+ lun_count = 1;
+ }
+
+ if (buf) {
+ len = cpu_to_be32(lun_count * 8);
+ memcpy(buf, &len, min_t(int, sizeof len, cmd->data_length));
+ transport_kunmap_data_sg(cmd);
+ }
target_complete_cmd_with_length(cmd, GOOD, 8 + lun_count * 8);
return 0;
}
break;
default:
- pr_warn("TARGET_CORE[%s]: Unsupported SCSI Opcode"
- " 0x%02x, sending CHECK_CONDITION.\n",
- cmd->se_tfo->get_fabric_name(), cdb[0]);
return TCM_UNSUPPORTED_SCSI_OPCODE;
}
Code Review / kvmfornfv.git / blobdiff