*
******************************************************************************/
+/*
+ * See SPC4, section 7.5 "Protocol specific parameters" for details
+ * on the formats implemented in this file.
+ */
+
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/ctype.h>
#include <linux/spinlock.h>
#include <linux/export.h>
-#include <scsi/scsi.h>
-#include <scsi/scsi_cmnd.h>
+
+#include <scsi/scsi_proto.h>
#include <target/target_core_base.h>
#include <target/target_core_fabric.h>
-#include <target/target_core_configfs.h>
#include "target_core_internal.h"
#include "target_core_pr.h"
-/*
- * Handlers for Serial Attached SCSI (SAS)
- */
-u8 sas_get_fabric_proto_ident(struct se_portal_group *se_tpg)
-{
- /*
- * Return a SAS Serial SCSI Protocol identifier for loopback operations
- * This is defined in section 7.5.1 Table 362 in spc4r17
- */
- return 0x6;
-}
-EXPORT_SYMBOL(sas_get_fabric_proto_ident);
-u32 sas_get_pr_transport_id(
- struct se_portal_group *se_tpg,
- struct se_node_acl *se_nacl,
- struct t10_pr_registration *pr_reg,
+static int sas_get_pr_transport_id(
+ struct se_node_acl *nacl,
int *format_code,
unsigned char *buf)
{
- unsigned char *ptr;
int ret;
- /*
- * Set PROTOCOL IDENTIFIER to 6h for SAS
- */
- buf[0] = 0x06;
- /*
- * From spc4r17, 7.5.4.7 TransportID for initiator ports using SCSI
- * over SAS Serial SCSI Protocol
- */
- ptr = &se_nacl->initiatorname[4]; /* Skip over 'naa. prefix */
-
- ret = hex2bin(&buf[4], ptr, 8);
- if (ret < 0)
- pr_debug("sas transport_id: invalid hex string\n");
+ /* Skip over 'naa. prefix */
+ ret = hex2bin(&buf[4], &nacl->initiatorname[4], 8);
+ if (ret) {
+ pr_debug("%s: invalid hex string\n", __func__);
+ return ret;
+ }
- /*
- * The SAS Transport ID is a hardcoded 24-byte length
- */
return 24;
}
-EXPORT_SYMBOL(sas_get_pr_transport_id);
-u32 sas_get_pr_transport_id_len(
- struct se_portal_group *se_tpg,
+static int fc_get_pr_transport_id(
struct se_node_acl *se_nacl,
- struct t10_pr_registration *pr_reg,
- int *format_code)
-{
- *format_code = 0;
- /*
- * From spc4r17, 7.5.4.7 TransportID for initiator ports using SCSI
- * over SAS Serial SCSI Protocol
- *
- * The SAS Transport ID is a hardcoded 24-byte length
- */
- return 24;
-}
-EXPORT_SYMBOL(sas_get_pr_transport_id_len);
-
-/*
- * Used for handling SCSI fabric dependent TransportIDs in SPC-3 and above
- * Persistent Reservation SPEC_I_PT=1 and PROUT REGISTER_AND_MOVE operations.
- */
-char *sas_parse_pr_out_transport_id(
- struct se_portal_group *se_tpg,
- const char *buf,
- u32 *out_tid_len,
- char **port_nexus_ptr)
-{
- /*
- * Assume the FORMAT CODE 00b from spc4r17, 7.5.4.7 TransportID
- * for initiator ports using SCSI over SAS Serial SCSI Protocol
- *
- * The TransportID for a SAS Initiator Port is of fixed size of
- * 24 bytes, and SAS does not contain a I_T nexus identifier,
- * so we return the **port_nexus_ptr set to NULL.
- */
- *port_nexus_ptr = NULL;
- *out_tid_len = 24;
-
- return (char *)&buf[4];
-}
-EXPORT_SYMBOL(sas_parse_pr_out_transport_id);
-
-/*
- * Handlers for Fibre Channel Protocol (FCP)
- */
-u8 fc_get_fabric_proto_ident(struct se_portal_group *se_tpg)
-{
- return 0x0; /* 0 = fcp-2 per SPC4 section 7.5.1 */
-}
-EXPORT_SYMBOL(fc_get_fabric_proto_ident);
-
-u32 fc_get_pr_transport_id_len(
- struct se_portal_group *se_tpg,
- struct se_node_acl *se_nacl,
- struct t10_pr_registration *pr_reg,
- int *format_code)
-{
- *format_code = 0;
- /*
- * The FC Transport ID is a hardcoded 24-byte length
- */
- return 24;
-}
-EXPORT_SYMBOL(fc_get_pr_transport_id_len);
-
-u32 fc_get_pr_transport_id(
- struct se_portal_group *se_tpg,
- struct se_node_acl *se_nacl,
- struct t10_pr_registration *pr_reg,
int *format_code,
unsigned char *buf)
{
u32 off = 8;
/*
- * PROTOCOL IDENTIFIER is 0h for FCP-2
- *
- * From spc4r17, 7.5.4.2 TransportID for initiator ports using
- * SCSI over Fibre Channel
- *
* We convert the ASCII formatted N Port name into a binary
* encoded TransportID.
*/
ptr = &se_nacl->initiatorname[0];
-
for (i = 0; i < 24; ) {
if (!strncmp(&ptr[i], ":", 1)) {
i++;
continue;
}
ret = hex2bin(&buf[off++], &ptr[i], 1);
- if (ret < 0)
- pr_debug("fc transport_id: invalid hex string\n");
+ if (ret < 0) {
+ pr_debug("%s: invalid hex string\n", __func__);
+ return ret;
+ }
i += 2;
}
/*
*/
return 24;
}
-EXPORT_SYMBOL(fc_get_pr_transport_id);
-char *fc_parse_pr_out_transport_id(
- struct se_portal_group *se_tpg,
- const char *buf,
- u32 *out_tid_len,
- char **port_nexus_ptr)
+static int sbp_get_pr_transport_id(
+ struct se_node_acl *nacl,
+ int *format_code,
+ unsigned char *buf)
{
- /*
- * The TransportID for a FC N Port is of fixed size of
- * 24 bytes, and FC does not contain a I_T nexus identifier,
- * so we return the **port_nexus_ptr set to NULL.
- */
- *port_nexus_ptr = NULL;
- *out_tid_len = 24;
+ int ret;
- return (char *)&buf[8];
-}
-EXPORT_SYMBOL(fc_parse_pr_out_transport_id);
+ ret = hex2bin(&buf[8], nacl->initiatorname, 8);
+ if (ret) {
+ pr_debug("%s: invalid hex string\n", __func__);
+ return ret;
+ }
-/*
- * Handlers for Internet Small Computer Systems Interface (iSCSI)
- */
+ return 24;
+}
-u8 iscsi_get_fabric_proto_ident(struct se_portal_group *se_tpg)
+static int srp_get_pr_transport_id(
+ struct se_node_acl *nacl,
+ int *format_code,
+ unsigned char *buf)
{
- /*
- * This value is defined for "Internet SCSI (iSCSI)"
- * in spc4r17 section 7.5.1 Table 362
- */
- return 0x5;
+ const char *p;
+ unsigned len, count, leading_zero_bytes;
+ int rc;
+
+ p = nacl->initiatorname;
+ if (strncasecmp(p, "0x", 2) == 0)
+ p += 2;
+ len = strlen(p);
+ if (len % 2)
+ return -EINVAL;
+
+ count = min(len / 2, 16U);
+ leading_zero_bytes = 16 - count;
+ memset(buf + 8, 0, leading_zero_bytes);
+ rc = hex2bin(buf + 8 + leading_zero_bytes, p, count);
+ if (rc < 0) {
+ pr_debug("hex2bin failed for %s: %d\n", __func__, rc);
+ return rc;
+ }
+
+ return 24;
}
-EXPORT_SYMBOL(iscsi_get_fabric_proto_ident);
-u32 iscsi_get_pr_transport_id(
- struct se_portal_group *se_tpg,
+static int iscsi_get_pr_transport_id(
struct se_node_acl *se_nacl,
struct t10_pr_registration *pr_reg,
int *format_code,
u16 len = 0;
spin_lock_irq(&se_nacl->nacl_sess_lock);
- /*
- * Set PROTOCOL IDENTIFIER to 5h for iSCSI
- */
- buf[0] = 0x05;
/*
* From spc4r17 Section 7.5.4.6: TransportID for initiator
* ports using SCSI over iSCSI.
return len;
}
-EXPORT_SYMBOL(iscsi_get_pr_transport_id);
-u32 iscsi_get_pr_transport_id_len(
- struct se_portal_group *se_tpg,
+static int iscsi_get_pr_transport_id_len(
struct se_node_acl *se_nacl,
struct t10_pr_registration *pr_reg,
int *format_code)
return len;
}
-EXPORT_SYMBOL(iscsi_get_pr_transport_id_len);
-char *iscsi_parse_pr_out_transport_id(
+static char *iscsi_parse_pr_out_transport_id(
struct se_portal_group *se_tpg,
const char *buf,
u32 *out_tid_len,
return (char *)&buf[4];
}
-EXPORT_SYMBOL(iscsi_parse_pr_out_transport_id);
+
+int target_get_pr_transport_id_len(struct se_node_acl *nacl,
+ struct t10_pr_registration *pr_reg, int *format_code)
+{
+ switch (nacl->se_tpg->proto_id) {
+ case SCSI_PROTOCOL_FCP:
+ case SCSI_PROTOCOL_SBP:
+ case SCSI_PROTOCOL_SRP:
+ case SCSI_PROTOCOL_SAS:
+ break;
+ case SCSI_PROTOCOL_ISCSI:
+ return iscsi_get_pr_transport_id_len(nacl, pr_reg, format_code);
+ default:
+ pr_err("Unknown proto_id: 0x%02x\n", nacl->se_tpg->proto_id);
+ return -EINVAL;
+ }
+
+ /*
+ * Most transports use a fixed length 24 byte identifier.
+ */
+ *format_code = 0;
+ return 24;
+}
+
+int target_get_pr_transport_id(struct se_node_acl *nacl,
+ struct t10_pr_registration *pr_reg, int *format_code,
+ unsigned char *buf)
+{
+ switch (nacl->se_tpg->proto_id) {
+ case SCSI_PROTOCOL_SAS:
+ return sas_get_pr_transport_id(nacl, format_code, buf);
+ case SCSI_PROTOCOL_SBP:
+ return sbp_get_pr_transport_id(nacl, format_code, buf);
+ case SCSI_PROTOCOL_SRP:
+ return srp_get_pr_transport_id(nacl, format_code, buf);
+ case SCSI_PROTOCOL_FCP:
+ return fc_get_pr_transport_id(nacl, format_code, buf);
+ case SCSI_PROTOCOL_ISCSI:
+ return iscsi_get_pr_transport_id(nacl, pr_reg, format_code,
+ buf);
+ default:
+ pr_err("Unknown proto_id: 0x%02x\n", nacl->se_tpg->proto_id);
+ return -EINVAL;
+ }
+}
+
+const char *target_parse_pr_out_transport_id(struct se_portal_group *tpg,
+ const char *buf, u32 *out_tid_len, char **port_nexus_ptr)
+{
+ u32 offset;
+
+ switch (tpg->proto_id) {
+ case SCSI_PROTOCOL_SAS:
+ /*
+ * Assume the FORMAT CODE 00b from spc4r17, 7.5.4.7 TransportID
+ * for initiator ports using SCSI over SAS Serial SCSI Protocol.
+ */
+ offset = 4;
+ break;
+ case SCSI_PROTOCOL_SBP:
+ case SCSI_PROTOCOL_SRP:
+ case SCSI_PROTOCOL_FCP:
+ offset = 8;
+ break;
+ case SCSI_PROTOCOL_ISCSI:
+ return iscsi_parse_pr_out_transport_id(tpg, buf, out_tid_len,
+ port_nexus_ptr);
+ default:
+ pr_err("Unknown proto_id: 0x%02x\n", tpg->proto_id);
+ return NULL;
+ }
+
+ *port_nexus_ptr = NULL;
+ *out_tid_len = 24;
+ return buf + offset;
+}
Code Review / kvmfornfv.git / blobdiff