These changes are the raw update to linux-4.4.6-rt14. Kernel sources
[kvmfornfv.git] / kernel / drivers / staging / slicoss / slichw.h
index 21cd02b..9723b4a 100644 (file)
@@ -307,9 +307,11 @@ struct slic_regs {
 
        u32     slic_hbar;      /* Header buffer address reg */
        u32     pad4;
-       /* 31-8 - phy addr of set of contiguous hdr buffers
-           7-0 - number of buffers passed
-          Buffers are 256 bytes long on 256-byte boundaries. */
+       /*
+        * 31-8 - phy addr of set of contiguous hdr buffers
+        *  7-0 - number of buffers passed
+        * Buffers are 256 bytes long on 256-byte boundaries.
+        */
 #define SLIC_HBAR              0x0020
 #define SLIC_HBAR_CNT_MSK      0x000000FF
 
@@ -321,10 +323,12 @@ struct slic_regs {
 #define SLIC_DBAR_SIZE         2048
 
        u32     slic_cbar;      /* Xmt Cmd buf addr regs.*/
-       /* 1 per XMT interface
-          31-5 - phy addr of host command buffer
-           4-0 - length of cmd in multiples of 32 bytes
-          Buffers are 32 bytes up to 512 bytes long */
+       /*
+        * 1 per XMT interface
+        * 31-5 - phy addr of host command buffer
+        *  4-0 - length of cmd in multiples of 32 bytes
+        * Buffers are 32 bytes up to 512 bytes long
+        */
 #define SLIC_CBAR              0x0030
 #define SLIC_CBAR_LEN_MSK      0x0000001F
 #define SLIC_CBAR_ALIGN                0x00000020
@@ -336,9 +340,11 @@ struct slic_regs {
 
        u32     slic_rbar;      /* Response buffer address reg.*/
        u32     pad7;
-        /*31-8 - phy addr of set of contiguous response buffers
-         7-0 - number of buffers passed
-        Buffers are 32 bytes long on 32-byte boundaries.*/
+       /*
+        * 31-8 - phy addr of set of contiguous response buffers
+        * 7-0 - number of buffers passed
+        * Buffers are 32 bytes long on 32-byte boundaries.
+        */
 #define SLIC_RBAR              0x0038
 #define SLIC_RBAR_CNT_MSK      0x000000FF
 #define SLIC_RBAR_SIZE         32
@@ -430,7 +436,8 @@ struct slic_regs {
 #define SLIC_LOW_POWER 0x00e0
 
        u32     slic_quiesce;   /* force slic into quiescent state
-                                  before soft reset */
+                                * before soft reset
+                                */
        u32     pad30;
 #define SLIC_QUIESCE   0x00e8
 
@@ -718,7 +725,8 @@ struct slic_eeprom {
        u16 DSize2Pci;          /* 15 DRAM size to PCI (bytes * 64K) */
        u16 RSize2Pci;          /* 16 ROM extension size to PCI (bytes * 4k) */
        u8 NetIntPin1;          /* 17 Network Interface Pin 1
-                                   (simba/leone only) */
+                                *  (simba/leone only)
+                                */
        u8 NetIntPin2;          /* Network Interface Pin 2 (simba/leone only)*/
        union {
                u8 NetIntPin3;  /* 18 Network Interface Pin 3 (simba only) */
@@ -748,7 +756,8 @@ struct slic_eeprom {
        union oemfru OemFru;    /* optional OEM FRU information */
        u8      Pad[4];         /* Pad to 128 bytes - includes 2 cksum bytes
                                 * (if OEM FRU info exists) and two unusable
-                                * bytes at the end */
+                                * bytes at the end
+                                */
 };
 
 /* SLIC EEPROM structure for Oasis */
@@ -772,7 +781,8 @@ struct oslic_eeprom {
        u16 FlashSize;          /* 14 Flash size (bytes / 4K) */
        u16 DSize2Pci;          /* 15 DRAM size to PCI (bytes / 64K) */
        u16 RSize2Pci;          /* 16 Flash (ROM extension) size to PCI
-                                       (bytes / 4K) */
+                                *      (bytes / 4K)
+                                */
        u16 DeviceId1;          /* 17 Device Id (function 1) */
        u16 DeviceId2;          /* 18 Device Id (function 2) */
        u16 CfgByte6;           /* 19 Device Status Config Bytes 6-7 */