--- /dev/null
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2010 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * Modifications for inclusion into the Linux staging tree are
+ * Copyright(c) 2010 Larry Finger. All rights reserved.
+ *
+ * Contact information:
+ * WLAN FAE <wlanfae@realtek.com>
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ ******************************************************************************/
+#ifndef __RTL871X_CMD_H_
+#define __RTL871X_CMD_H_
+
+#include "wlan_bssdef.h"
+#include "rtl871x_rf.h"
+#define C2H_MEM_SZ (16*1024)
+
+#include "osdep_service.h"
+#include "ieee80211.h"
+
+#define FREE_CMDOBJ_SZ 128
+#define MAX_CMDSZ 512
+#define MAX_RSPSZ 512
+#define MAX_EVTSZ 1024
+#define CMDBUFF_ALIGN_SZ 512
+
+struct cmd_obj {
+ u16 cmdcode;
+ u8 res;
+ u8 *parmbuf;
+ u32 cmdsz;
+ u8 *rsp;
+ u32 rspsz;
+ struct list_head list;
+};
+
+struct cmd_priv {
+ struct semaphore cmd_queue_sema;
+ struct semaphore terminate_cmdthread_sema;
+ struct __queue cmd_queue;
+ u8 cmd_seq;
+ u8 *cmd_buf; /*shall be non-paged, and 4 bytes aligned*/
+ u8 *cmd_allocated_buf;
+ u8 *rsp_buf; /*shall be non-paged, and 4 bytes aligned*/
+ u8 *rsp_allocated_buf;
+ u32 cmd_issued_cnt;
+ u32 cmd_done_cnt;
+ u32 rsp_cnt;
+ struct _adapter *padapter;
+};
+
+struct evt_obj {
+ u16 evtcode;
+ u8 res;
+ u8 *parmbuf;
+ u32 evtsz;
+ struct list_head list;
+};
+
+struct evt_priv {
+ struct __queue evt_queue;
+ u8 event_seq;
+ u8 *evt_buf; /*shall be non-paged, and 4 bytes aligned*/
+ u8 *evt_allocated_buf;
+ u32 evt_done_cnt;
+ struct tasklet_struct event_tasklet;
+};
+
+#define init_h2fwcmd_w_parm_no_rsp(pcmd, pparm, code) \
+do {\
+ INIT_LIST_HEAD(&pcmd->list);\
+ pcmd->cmdcode = code;\
+ pcmd->parmbuf = (u8 *)(pparm);\
+ pcmd->cmdsz = sizeof(*pparm);\
+ pcmd->rsp = NULL;\
+ pcmd->rspsz = 0;\
+} while (0)
+
+u32 r8712_enqueue_cmd(struct cmd_priv *pcmdpriv, struct cmd_obj *obj);
+u32 r8712_enqueue_cmd_ex(struct cmd_priv *pcmdpriv, struct cmd_obj *obj);
+struct cmd_obj *r8712_dequeue_cmd(struct __queue *queue);
+void r8712_free_cmd_obj(struct cmd_obj *pcmd);
+int r8712_cmd_thread(void *context);
+u32 r8712_init_cmd_priv(struct cmd_priv *pcmdpriv);
+void r8712_free_cmd_priv(struct cmd_priv *pcmdpriv);
+u32 r8712_init_evt_priv(struct evt_priv *pevtpriv);
+void r8712_free_evt_priv(struct evt_priv *pevtpriv);
+
+enum rtl871x_drvint_cid {
+ NONE_WK_CID,
+ WDG_WK_CID,
+ MAX_WK_CID
+};
+
+enum RFINTFS {
+ SWSI,
+ HWSI,
+ HWPI,
+};
+
+/*
+ * Caller Mode: Infra, Ad-HoC(C)
+ * Notes: To enter USB suspend mode
+ * Command Mode
+ */
+struct usb_suspend_parm {
+ u32 action; /* 1: sleep, 0:resume */
+};
+
+/*
+ * Caller Mode: Infra, Ad-Hoc
+ * Notes: To join the specified bss
+ * Command Event Mode
+ */
+struct joinbss_parm {
+ struct ndis_wlan_bssid_ex network;
+};
+
+/*
+ * Caller Mode: Infra, Ad-HoC(C)
+ * Notes: To disconnect the current associated BSS
+ * Command Mode
+ */
+struct disconnect_parm {
+ u32 rsvd;
+};
+
+/*
+ * Caller Mode: AP, Ad-HoC(M)
+ * Notes: To create a BSS
+ * Command Mode
+ */
+struct createbss_parm {
+ struct ndis_wlan_bssid_ex network;
+};
+
+/*
+ * Caller Mode: AP, Ad-HoC, Infra
+ * Notes: To set the NIC mode of RTL8711
+ * Command Mode
+ * The definition of mode:
+ *
+ * #define IW_MODE_AUTO 0 // Let the driver decides which AP to join
+ * #define IW_MODE_ADHOC 1 // Single cell network (Ad-Hoc Clients)
+ * #define IW_MODE_INFRA 2 // Multi cell network, roaming, ..
+ * #define IW_MODE_MASTER 3 // Synchronisation master or AP
+ * #define IW_MODE_REPEAT 4 // Wireless Repeater (forwarder)
+ * #define IW_MODE_SECOND 5 // Secondary master/repeater (backup)
+ * #define IW_MODE_MONITOR 6 // Passive monitor (listen only)
+*/
+struct setopmode_parm {
+ u8 mode;
+ u8 rsvd[3];
+};
+
+/*
+ * Caller Mode: AP, Ad-HoC, Infra
+ * Notes: To ask RTL8711 performing site-survey
+ * Command-Event Mode
+ */
+struct sitesurvey_parm {
+ sint passive_mode; /*active: 1, passive: 0 */
+ sint bsslimit; /* 1 ~ 48 */
+ sint ss_ssidlen;
+ u8 ss_ssid[IW_ESSID_MAX_SIZE + 1];
+};
+
+/*
+ * Caller Mode: Any
+ * Notes: To set the auth type of RTL8711. open/shared/802.1x
+ * Command Mode
+ */
+struct setauth_parm {
+ u8 mode; /*0: legacy open, 1: legacy shared 2: 802.1x*/
+ u8 _1x; /*0: PSK, 1: TLS*/
+ u8 rsvd[2];
+};
+
+/*
+ * Caller Mode: Infra
+ * a. algorithm: wep40, wep104, tkip & aes
+ * b. keytype: grp key/unicast key
+ * c. key contents
+ *
+ * when shared key ==> keyid is the camid
+ * when 802.1x ==> keyid [0:1] ==> grp key
+ * when 802.1x ==> keyid > 2 ==> unicast key
+ */
+struct setkey_parm {
+ u8 algorithm; /* encryption algorithm, could be none, wep40,
+ * TKIP, CCMP, wep104 */
+ u8 keyid;
+ u8 grpkey; /* 1: this is the grpkey for 802.1x.
+ * 0: this is the unicast key for 802.1x */
+ u8 key[16]; /* this could be 40 or 104 */
+};
+
+/*
+ * When in AP or Ad-Hoc mode, this is used to
+ * allocate an sw/hw entry for a newly associated sta.
+ * Command
+ * when shared key ==> algorithm/keyid
+ */
+struct set_stakey_parm {
+ u8 addr[ETH_ALEN];
+ u8 algorithm;
+ u8 key[16];
+};
+
+struct set_stakey_rsp {
+ u8 addr[ETH_ALEN];
+ u8 keyid;
+ u8 rsvd;
+};
+
+struct SetMacAddr_param {
+ u8 MacAddr[ETH_ALEN];
+};
+
+/*
+Caller Ad-Hoc/AP
+
+Command -Rsp(AID == CAMID) mode
+
+This is to force fw to add an sta_data entry per driver's request.
+
+FW will write an cam entry associated with it.
+
+*/
+struct set_assocsta_parm {
+ u8 addr[ETH_ALEN];
+};
+
+struct set_assocsta_rsp {
+ u8 cam_id;
+ u8 rsvd[3];
+};
+
+/*
+ Caller Ad-Hoc/AP
+
+ Command mode
+
+ This is to force fw to del an sta_data entry per driver's request
+
+ FW will invalidate the cam entry associated with it.
+
+*/
+struct del_assocsta_parm {
+ u8 addr[ETH_ALEN];
+};
+
+/*
+Caller Mode: AP/Ad-HoC(M)
+
+Notes: To notify fw that given staid has changed its power state
+
+Command Mode
+
+*/
+struct setstapwrstate_parm {
+ u8 staid;
+ u8 status;
+ u8 hwaddr[6];
+};
+
+/*
+Caller Mode: Any
+
+Notes: To setup the basic rate of RTL8711
+
+Command Mode
+
+*/
+struct setbasicrate_parm {
+ u8 basicrates[NumRates];
+};
+
+/*
+Caller Mode: Any
+
+Notes: To read the current basic rate
+
+Command-Rsp Mode
+
+*/
+struct getbasicrate_parm {
+ u32 rsvd;
+};
+
+struct getbasicrate_rsp {
+ u8 basicrates[NumRates];
+};
+
+/*
+Caller Mode: Any
+
+Notes: To setup the data rate of RTL8711
+
+Command Mode
+
+*/
+struct setdatarate_parm {
+ u8 mac_id;
+ u8 datarates[NumRates];
+};
+
+enum _RT_CHANNEL_DOMAIN {
+ RT_CHANNEL_DOMAIN_FCC = 0,
+ RT_CHANNEL_DOMAIN_IC = 1,
+ RT_CHANNEL_DOMAIN_ETSI = 2,
+ RT_CHANNEL_DOMAIN_SPAIN = 3,
+ RT_CHANNEL_DOMAIN_FRANCE = 4,
+ RT_CHANNEL_DOMAIN_MKK = 5,
+ RT_CHANNEL_DOMAIN_MKK1 = 6,
+ RT_CHANNEL_DOMAIN_ISRAEL = 7,
+ RT_CHANNEL_DOMAIN_TELEC = 8,
+
+ /* Be compatible with old channel plan. No good! */
+ RT_CHANNEL_DOMAIN_MIC = 9,
+ RT_CHANNEL_DOMAIN_GLOBAL_DOAMIN = 10,
+ RT_CHANNEL_DOMAIN_WORLD_WIDE_13 = 11,
+ RT_CHANNEL_DOMAIN_TELEC_NETGEAR = 12,
+
+ RT_CHANNEL_DOMAIN_NCC = 13,
+ RT_CHANNEL_DOMAIN_5G = 14,
+ RT_CHANNEL_DOMAIN_5G_40M = 15,
+ /*===== Add new channel plan above this line===============*/
+ RT_CHANNEL_DOMAIN_MAX,
+};
+
+
+struct SetChannelPlan_param {
+ enum _RT_CHANNEL_DOMAIN ChannelPlan;
+};
+
+/*
+Caller Mode: Any
+
+Notes: To read the current data rate
+
+Command-Rsp Mode
+
+*/
+struct getdatarate_parm {
+ u32 rsvd;
+
+};
+struct getdatarate_rsp {
+ u8 datarates[NumRates];
+};
+
+
+/*
+Caller Mode: Any
+AP: AP can use the info for the contents of beacon frame
+Infra: STA can use the info when sitesurveying
+Ad-HoC(M): Like AP
+Ad-HoC(C): Like STA
+
+
+Notes: To set the phy capability of the NIC
+
+Command Mode
+
+*/
+
+/*
+Caller Mode: Any
+
+Notes: To set the channel/modem/band
+This command will be used when channel/modem/band is changed.
+
+Command Mode
+
+*/
+/*
+Caller Mode: Any
+
+Notes: To get the current setting of channel/modem/band
+
+Command-Rsp Mode
+
+*/
+struct getphy_rsp {
+ u8 rfchannel;
+ u8 modem;
+};
+
+struct readBB_parm {
+ u8 offset;
+};
+struct readBB_rsp {
+ u8 value;
+};
+
+struct readTSSI_parm {
+ u8 offset;
+};
+struct readTSSI_rsp {
+ u8 value;
+};
+
+struct writeBB_parm {
+ u8 offset;
+ u8 value;
+};
+
+struct writePTM_parm {
+ u8 type;
+};
+
+struct readRF_parm {
+ u8 offset;
+};
+struct readRF_rsp {
+ u32 value;
+};
+
+struct writeRF_parm {
+ u32 offset;
+ u32 value;
+};
+
+struct setrfintfs_parm {
+ u8 rfintfs;
+};
+
+struct getrfintfs_parm {
+ u8 rfintfs;
+};
+
+/*
+ Notes: This command is used for H2C/C2H loopback testing
+
+ mac[0] == 0
+ ==> CMD mode, return H2C_SUCCESS.
+ The following condition must be ture under CMD mode
+ mac[1] == mac[4], mac[2] == mac[3], mac[0]=mac[5]= 0;
+ s0 == 0x1234, s1 == 0xabcd, w0 == 0x78563412, w1 == 0x5aa5def7;
+ s2 == (b1 << 8 | b0);
+
+ mac[0] == 1
+ ==> CMD_RSP mode, return H2C_SUCCESS_RSP
+
+ The rsp layout shall be:
+ rsp: parm:
+ mac[0] = mac[5];
+ mac[1] = mac[4];
+ mac[2] = mac[3];
+ mac[3] = mac[2];
+ mac[4] = mac[1];
+ mac[5] = mac[0];
+ s0 = s1;
+ s1 = swap16(s0);
+ w0 = swap32(w1);
+ b0 = b1
+ s2 = s0 + s1
+ b1 = b0
+ w1 = w0
+
+ mac[0] == 2
+ ==> CMD_EVENT mode, return H2C_SUCCESS
+ The event layout shall be:
+ event: parm:
+ mac[0] = mac[5];
+ mac[1] = mac[4];
+ mac[2] = event's sequence number, starting from 1 to parm's marc[3]
+ mac[3] = mac[2];
+ mac[4] = mac[1];
+ mac[5] = mac[0];
+ s0 = swap16(s0) - event.mac[2];
+ s1 = s1 + event.mac[2];
+ w0 = swap32(w0);
+ b0 = b1
+ s2 = s0 + event.mac[2]
+ b1 = b0
+ w1 = swap32(w1) - event.mac[2];
+
+ parm->mac[3] is the total event counts that host requested.
+
+
+ event will be the same with the cmd's param.
+
+*/
+
+/* CMD param Formart for DRV INTERNAL CMD HDL*/
+struct drvint_cmd_parm {
+ int i_cid; /*internal cmd id*/
+ int sz; /* buf sz*/
+ unsigned char *pbuf;
+};
+
+/*------------------- Below are used for RF/BB tunning ---------------------*/
+
+struct setantenna_parm {
+ u8 tx_antset;
+ u8 rx_antset;
+ u8 tx_antenna;
+ u8 rx_antenna;
+};
+
+struct enrateadaptive_parm {
+ u32 en;
+};
+
+struct settxagctbl_parm {
+ u32 txagc[MAX_RATES_LENGTH];
+};
+
+struct gettxagctbl_parm {
+ u32 rsvd;
+};
+struct gettxagctbl_rsp {
+ u32 txagc[MAX_RATES_LENGTH];
+};
+
+struct setagcctrl_parm {
+ u32 agcctrl; /* 0: pure hw, 1: fw */
+};
+
+struct setssup_parm {
+ u32 ss_ForceUp[MAX_RATES_LENGTH];
+};
+
+struct getssup_parm {
+ u32 rsvd;
+};
+struct getssup_rsp {
+ u8 ss_ForceUp[MAX_RATES_LENGTH];
+};
+
+struct setssdlevel_parm {
+ u8 ss_DLevel[MAX_RATES_LENGTH];
+};
+
+struct getssdlevel_parm {
+ u32 rsvd;
+};
+struct getssdlevel_rsp {
+ u8 ss_DLevel[MAX_RATES_LENGTH];
+};
+
+struct setssulevel_parm {
+ u8 ss_ULevel[MAX_RATES_LENGTH];
+};
+
+struct getssulevel_parm {
+ u32 rsvd;
+};
+struct getssulevel_rsp {
+ u8 ss_ULevel[MAX_RATES_LENGTH];
+};
+
+struct setcountjudge_parm {
+ u8 count_judge[MAX_RATES_LENGTH];
+};
+
+struct getcountjudge_parm {
+ u32 rsvd;
+};
+
+struct getcountjudge_rsp {
+ u8 count_judge[MAX_RATES_LENGTH];
+};
+
+struct setpwrmode_parm {
+ u8 mode;
+ u8 flag_low_traffic_en;
+ u8 flag_lpnav_en;
+ u8 flag_rf_low_snr_en;
+ u8 flag_dps_en; /* 1: dps, 0: 32k */
+ u8 bcn_rx_en;
+ u8 bcn_pass_cnt; /* fw report one beacon information to
+ * driver when it receives bcn_pass_cnt
+ * beacons. */
+ u8 bcn_to; /* beacon TO (ms). ¡§=0¡¨ no limit.*/
+ u16 bcn_itv;
+ u8 app_itv; /* only for VOIP mode. */
+ u8 awake_bcn_itv;
+ u8 smart_ps;
+ u8 bcn_pass_time; /* unit: 100ms */
+};
+
+struct setatim_parm {
+ u8 op; /*0: add, 1:del*/
+ u8 txid; /* id of dest station.*/
+};
+
+struct setratable_parm {
+ u8 ss_ForceUp[NumRates];
+ u8 ss_ULevel[NumRates];
+ u8 ss_DLevel[NumRates];
+ u8 count_judge[NumRates];
+};
+
+struct getratable_parm {
+ uint rsvd;
+};
+struct getratable_rsp {
+ u8 ss_ForceUp[NumRates];
+ u8 ss_ULevel[NumRates];
+ u8 ss_DLevel[NumRates];
+ u8 count_judge[NumRates];
+};
+
+/*to get TX,RX retry count*/
+struct gettxretrycnt_parm {
+ unsigned int rsvd;
+};
+
+struct gettxretrycnt_rsp {
+ unsigned long tx_retrycnt;
+};
+
+struct getrxretrycnt_parm {
+ unsigned int rsvd;
+};
+
+struct getrxretrycnt_rsp {
+ unsigned long rx_retrycnt;
+};
+
+/*to get BCNOK,BCNERR count*/
+struct getbcnokcnt_parm {
+ unsigned int rsvd;
+};
+
+struct getbcnokcnt_rsp {
+ unsigned long bcnokcnt;
+};
+
+struct getbcnerrcnt_parm {
+ unsigned int rsvd;
+};
+struct getbcnerrcnt_rsp {
+ unsigned long bcnerrcnt;
+};
+
+/* to get current TX power level*/
+struct getcurtxpwrlevel_parm {
+ unsigned int rsvd;
+};
+
+struct getcurtxpwrlevel_rsp {
+ unsigned short tx_power;
+};
+
+/*dynamic on/off DIG*/
+struct setdig_parm {
+ unsigned char dig_on; /* 1:on , 0:off */
+};
+
+/*dynamic on/off RA*/
+struct setra_parm {
+ unsigned char ra_on; /* 1:on , 0:off */
+};
+
+struct setprobereqextraie_parm {
+ unsigned char e_id;
+ unsigned char ie_len;
+ unsigned char ie[0];
+};
+
+struct setassocreqextraie_parm {
+ unsigned char e_id;
+ unsigned char ie_len;
+ unsigned char ie[0];
+};
+
+struct setproberspextraie_parm {
+ unsigned char e_id;
+ unsigned char ie_len;
+ unsigned char ie[0];
+};
+
+struct setassocrspextraie_parm {
+ unsigned char e_id;
+ unsigned char ie_len;
+ unsigned char ie[0];
+};
+
+struct addBaReq_parm {
+ unsigned int tid;
+};
+
+/*H2C Handler index: 46 */
+struct SetChannel_parm {
+ u32 curr_ch;
+};
+
+/*H2C Handler index: 61 */
+struct DisconnectCtrlEx_param {
+ /* MAXTIME = (2 * FirstStageTO) + (TryPktCnt * TryPktInterval) */
+ unsigned char EnableDrvCtrl;
+ unsigned char TryPktCnt;
+ unsigned char TryPktInterval; /* Unit: ms */
+ unsigned char rsvd;
+ unsigned int FirstStageTO; /* Unit: ms */
+};
+
+#define GEN_CMD_CODE(cmd) cmd ## _CMD_
+
+/*
+ * Result:
+ * 0x00: success
+ * 0x01: success, and check Response.
+ * 0x02: cmd ignored due to duplicated sequence number
+ * 0x03: cmd dropped due to invalid cmd code
+ * 0x04: reserved.
+ */
+
+#define H2C_RSP_OFFSET 512
+#define H2C_SUCCESS 0x00
+#define H2C_SUCCESS_RSP 0x01
+#define H2C_DUPLICATED 0x02
+#define H2C_DROPPED 0x03
+#define H2C_PARAMETERS_ERROR 0x04
+#define H2C_REJECTED 0x05
+#define H2C_CMD_OVERFLOW 0x06
+#define H2C_RESERVED 0x07
+
+u8 r8712_setMacAddr_cmd(struct _adapter *padapter, u8 *mac_addr);
+u8 r8712_setassocsta_cmd(struct _adapter *padapter, u8 *mac_addr);
+u8 r8712_sitesurvey_cmd(struct _adapter *padapter,
+ struct ndis_802_11_ssid *pssid);
+u8 r8712_createbss_cmd(struct _adapter *padapter);
+u8 r8712_setstakey_cmd(struct _adapter *padapter, u8 *psta, u8 unicast_key);
+u8 r8712_joinbss_cmd(struct _adapter *padapter,
+ struct wlan_network *pnetwork);
+u8 r8712_disassoc_cmd(struct _adapter *padapter);
+u8 r8712_setopmode_cmd(struct _adapter *padapter,
+ enum NDIS_802_11_NETWORK_INFRASTRUCTURE networktype);
+u8 r8712_setdatarate_cmd(struct _adapter *padapter, u8 *rateset);
+u8 r8712_set_chplan_cmd(struct _adapter *padapter, int chplan);
+u8 r8712_setbasicrate_cmd(struct _adapter *padapter, u8 *rateset);
+u8 r8712_getrfreg_cmd(struct _adapter *padapter, u8 offset, u8 *pval);
+u8 r8712_setrfintfs_cmd(struct _adapter *padapter, u8 mode);
+u8 r8712_setrfreg_cmd(struct _adapter *padapter, u8 offset, u32 val);
+u8 r8712_setrttbl_cmd(struct _adapter *padapter,
+ struct setratable_parm *prate_table);
+u8 r8712_gettssi_cmd(struct _adapter *padapter, u8 offset, u8 *pval);
+u8 r8712_setptm_cmd(struct _adapter *padapter, u8 type);
+u8 r8712_setfwdig_cmd(struct _adapter *padapter, u8 type);
+u8 r8712_setfwra_cmd(struct _adapter *padapter, u8 type);
+u8 r8712_addbareq_cmd(struct _adapter *padapter, u8 tid);
+u8 r8712_wdg_wk_cmd(struct _adapter *padapter);
+void r8712_survey_cmd_callback(struct _adapter *padapter,
+ struct cmd_obj *pcmd);
+void r8712_disassoc_cmd_callback(struct _adapter *padapter,
+ struct cmd_obj *pcmd);
+void r8712_joinbss_cmd_callback(struct _adapter *padapter,
+ struct cmd_obj *pcmd);
+void r8712_createbss_cmd_callback(struct _adapter *padapter,
+ struct cmd_obj *pcmd);
+void r8712_getbbrfreg_cmdrsp_callback(struct _adapter *padapter,
+ struct cmd_obj *pcmd);
+void r8712_readtssi_cmdrsp_callback(struct _adapter *padapter,
+ struct cmd_obj *pcmd);
+void r8712_setstaKey_cmdrsp_callback(struct _adapter *padapter,
+ struct cmd_obj *pcmd);
+void r8712_setassocsta_cmdrsp_callback(struct _adapter *padapter,
+ struct cmd_obj *pcmd);
+u8 r8712_disconnectCtrlEx_cmd(struct _adapter *adapter, u32 enableDrvCtrl,
+ u32 tryPktCnt, u32 tryPktInterval, u32 firstStageTO);
+
+struct _cmd_callback {
+ u32 cmd_code;
+ void (*callback)(struct _adapter *padapter, struct cmd_obj *cmd);
+};
+
+#include "rtl8712_cmd.h"
+
+#endif /* _CMD_H_ */
+
Code Review / kvmfornfv.git / blobdiff