#define MAX_KEY_LEN 61
#define KEY_BUF_SIZE 5
-#define BIT0 0x00000001
-#define BIT1 0x00000002
-#define BIT2 0x00000004
-#define BIT3 0x00000008
-#define BIT4 0x00000010
-#define BIT5 0x00000020
-#define BIT6 0x00000040
-#define BIT7 0x00000080
-#define BIT8 0x00000100
-#define BIT9 0x00000200
-#define BIT10 0x00000400
-#define BIT11 0x00000800
-#define BIT12 0x00001000
-#define BIT13 0x00002000
-#define BIT14 0x00004000
-#define BIT15 0x00008000
-#define BIT16 0x00010000
-#define BIT17 0x00020000
-#define BIT18 0x00040000
-#define BIT19 0x00080000
-#define BIT20 0x00100000
-#define BIT21 0x00200000
-#define BIT22 0x00400000
-#define BIT23 0x00800000
-#define BIT24 0x01000000
-#define BIT25 0x02000000
-#define BIT26 0x04000000
-#define BIT27 0x08000000
-#define BIT28 0x10000000
-#define BIT29 0x20000000
-#define BIT30 0x40000000
-#define BIT31 0x80000000
-
#define Rx_Smooth_Factor 20
#define DMESG(x, a...)
#define DMESGW(x, a...)
pr_debug("RTL8192U: " x "\n", ##args); \
} while (0)
-#define COMP_TRACE BIT0 /* Function call tracing. */
-#define COMP_DBG BIT1
-#define COMP_INIT BIT2 /* Driver initialization/halt/reset. */
+#define COMP_TRACE BIT(0) /* Function call tracing. */
+#define COMP_DBG BIT(1)
+#define COMP_INIT BIT(2) /* Driver initialization/halt/reset. */
-#define COMP_RECV BIT3 /* Receive data path. */
-#define COMP_SEND BIT4 /* Send data path. */
-#define COMP_IO BIT5
+#define COMP_RECV BIT(3) /* Receive data path. */
+#define COMP_SEND BIT(4) /* Send data path. */
+#define COMP_IO BIT(5)
/* 802.11 Power Save mode or System/Device Power state. */
-#define COMP_POWER BIT6
+#define COMP_POWER BIT(6)
/* 802.11 link related: join/start BSS, leave BSS. */
-#define COMP_EPROM BIT7
-#define COMP_SWBW BIT8 /* Bandwidth switch. */
-#define COMP_POWER_TRACKING BIT9 /* 8190 TX Power Tracking */
-#define COMP_TURBO BIT10 /* Turbo Mode */
-#define COMP_QOS BIT11
-#define COMP_RATE BIT12 /* Rate Adaptive mechanism */
-#define COMP_RM BIT13 /* Radio Measurement */
-#define COMP_DIG BIT14
-#define COMP_PHY BIT15
-#define COMP_CH BIT16 /* Channel setting debug */
-#define COMP_TXAGC BIT17 /* Tx power */
-#define COMP_HIPWR BIT18 /* High Power Mechanism */
-#define COMP_HALDM BIT19 /* HW Dynamic Mechanism */
-#define COMP_SEC BIT20 /* Event handling */
-#define COMP_LED BIT21
-#define COMP_RF BIT22
-#define COMP_RXDESC BIT23 /* Rx desc information for SD3 debug */
+#define COMP_EPROM BIT(7)
+#define COMP_SWBW BIT(8) /* Bandwidth switch. */
+#define COMP_POWER_TRACKING BIT(9) /* 8190 TX Power Tracking */
+#define COMP_TURBO BIT(10) /* Turbo Mode */
+#define COMP_QOS BIT(11)
+#define COMP_RATE BIT(12) /* Rate Adaptive mechanism */
+#define COMP_RM BIT(13) /* Radio Measurement */
+#define COMP_DIG BIT(14)
+#define COMP_PHY BIT(15)
+#define COMP_CH BIT(16) /* Channel setting debug */
+#define COMP_TXAGC BIT(17) /* Tx power */
+#define COMP_HIPWR BIT(18) /* High Power Mechanism */
+#define COMP_HALDM BIT(19) /* HW Dynamic Mechanism */
+#define COMP_SEC BIT(20) /* Event handling */
+#define COMP_LED BIT(21)
+#define COMP_RF BIT(22)
+#define COMP_RXDESC BIT(23) /* Rx desc information for SD3 debug */
/* 11n or 8190 specific code */
-#define COMP_FIRMWARE BIT24 /* Firmware downloading */
-#define COMP_HT BIT25 /* 802.11n HT related information */
-#define COMP_AMSDU BIT26 /* A-MSDU Debugging */
-#define COMP_SCAN BIT27
-#define COMP_DOWN BIT29 /* rm driver module */
-#define COMP_RESET BIT30 /* Silent reset */
-#define COMP_ERR BIT31 /* Error out, always on */
+#define COMP_FIRMWARE BIT(24) /* Firmware downloading */
+#define COMP_HT BIT(25) /* 802.11n HT related information */
+#define COMP_AMSDU BIT(26) /* A-MSDU Debugging */
+#define COMP_SCAN BIT(27)
+#define COMP_DOWN BIT(29) /* rm driver module */
+#define COMP_RESET BIT(30) /* Silent reset */
+#define COMP_ERR BIT(31) /* Error out, always on */
#define RTL819x_DEBUG
#ifdef RTL819x_DEBUG
u32 PacketID:13;
} tx_fwinfo_819x_usb, *ptx_fwinfo_819x_usb;
-typedef struct rtl8192_rx_info {
+struct rtl8192_rx_info {
struct urb *urb;
struct net_device *dev;
u8 out_pipe;
-} rtl8192_rx_info ;
+};
typedef struct rx_desc_819x_usb {
/* DOWRD 0 */
void write_phy_ofdm(struct net_device *dev, u8 adr, u32 data);
void rtl8185_tx_antenna(struct net_device *dev, u8 ant);
void rtl8192_set_rxconf(struct net_device *dev);
-extern void rtl819xusb_beacon_tx(struct net_device *dev, u16 tx_rate);
+void rtl819xusb_beacon_tx(struct net_device *dev, u16 tx_rate);
void EnableHWSecurityConfig8192(struct net_device *dev);
void setKey(struct net_device *dev, u8 EntryNo, u8 KeyIndex, u16 KeyType, u8 *MacAddr, u8 DefaultKey, u32 *KeyContent);
Code Review / kvmfornfv.git / blobdiff