Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / staging / rtl8188eu / include / rtl8188e_cmd.h
diff --git a/kernel/drivers/staging/rtl8188eu/include/rtl8188e_cmd.h b/kernel/drivers/staging/rtl8188eu/include/rtl8188e_cmd.h
new file mode 100644 (file)
index 0000000..42b1f22
--- /dev/null
@@ -0,0 +1,116 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __RTL8188E_CMD_H__
+#define __RTL8188E_CMD_H__
+
+enum RTL8188E_H2C_CMD_ID {
+       /* Class Common */
+       H2C_COM_RSVD_PAGE               = 0x00,
+       H2C_COM_MEDIA_STATUS_RPT        = 0x01,
+       H2C_COM_SCAN                    = 0x02,
+       H2C_COM_KEEP_ALIVE              = 0x03,
+       H2C_COM_DISCNT_DECISION         = 0x04,
+       H2C_COM_INIT_OFFLOAD            = 0x06,
+       H2C_COM_REMOTE_WAKE_CTL         = 0x07,
+       H2C_COM_AP_OFFLOAD              = 0x08,
+       H2C_COM_BCN_RSVD_PAGE           = 0x09,
+       H2C_COM_PROB_RSP_RSVD_PAGE      = 0x0A,
+
+       /* Class PS */
+       H2C_PS_PWR_MODE                 = 0x20,
+       H2C_PS_TUNE_PARA                = 0x21,
+       H2C_PS_TUNE_PARA_2              = 0x22,
+       H2C_PS_LPS_PARA                 = 0x23,
+       H2C_PS_P2P_OFFLOAD              = 0x24,
+
+       /* Class DM */
+       H2C_DM_MACID_CFG                = 0x40,
+       H2C_DM_TXBF                     = 0x41,
+
+       /* Class BT */
+       H2C_BT_COEX_MASK                = 0x60,
+       H2C_BT_COEX_GPIO_MODE           = 0x61,
+       H2C_BT_DAC_SWING_VAL            = 0x62,
+       H2C_BT_PSD_RST                  = 0x63,
+
+       /* Class */
+        H2C_RESET_TSF                  = 0xc0,
+};
+
+struct cmd_msg_parm {
+       u8 eid; /* element id */
+       u8 sz; /*  sz */
+       u8 buf[6];
+};
+
+enum {
+       PWRS
+};
+
+struct setpwrmode_parm {
+       u8 Mode;/* 0:Active,1:LPS,2:WMMPS */
+       u8 SmartPS_RLBM;/* LPS= 0:PS_Poll,1:PS_Poll,2:NullData,WMM= 0:PS_Poll,1:NullData */
+       u8 AwakeInterval;       /*  unit: beacon interval */
+       u8 bAllQueueUAPSD;
+       u8 PwrState;/* AllON(0x0c),RFON(0x04),RFOFF(0x00) */
+};
+
+struct H2C_SS_RFOFF_PARAM {
+       u8 ROFOn; /*  1: on, 0:off */
+       u16 gpio_period; /*  unit: 1024 us */
+} __packed;
+
+struct joinbssrpt_parm {
+       u8 OpMode;      /*  RT_MEDIA_STATUS */
+};
+
+struct rsvdpage_loc {
+       u8 LocProbeRsp;
+       u8 LocPsPoll;
+       u8 LocNullData;
+       u8 LocQosNull;
+       u8 LocBTQosNull;
+};
+
+struct P2P_PS_Offload_t {
+       u8 Offload_En:1;
+       u8 role:1; /*  1: Owner, 0: Client */
+       u8 CTWindow_En:1;
+       u8 NoA0_En:1;
+       u8 NoA1_En:1;
+       u8 AllStaSleep:1; /*  Only valid in Owner */
+       u8 discovery:1;
+       u8 rsvd:1;
+};
+
+struct P2P_PS_CTWPeriod_t {
+       u8 CTWPeriod;   /* TU */
+};
+
+/*  host message to firmware cmd */
+void rtl8188e_set_FwPwrMode_cmd(struct adapter *padapter, u8 Mode);
+void rtl8188e_set_FwJoinBssReport_cmd(struct adapter *padapter, u8 mstatus);
+u8 rtl8188e_set_raid_cmd(struct adapter *padapter, u32 mask);
+void rtl8188e_Add_RateATid(struct adapter *padapter, u32 bitmap, u8 arg,
+                          u8 rssi_level);
+
+void rtl8188e_set_FwMediaStatus_cmd(struct adapter *adapt, __le16 mstatus_rpt);
+
+#endif/* __RTL8188E_CMD_H__ */