static void _BeaconFunctionEnable(struct adapter *Adapter,
bool Enable, bool Linked)
{
- usb_write8(Adapter, REG_BCN_CTRL, (BIT4 | BIT3 | BIT1));
+ usb_write8(Adapter, REG_BCN_CTRL, (BIT(4) | BIT(3) | BIT(1)));
usb_write8(Adapter, REG_RD_CTRL+1, 0x6F);
}
return;
DBG_88E("==> %s ....\n", __func__);
- usb_write32(Adapter, REG_LEDCFG0, usb_read32(Adapter, REG_LEDCFG0)|BIT23);
- phy_set_bb_reg(Adapter, rFPGA0_XAB_RFParameter, BIT13, 0x01);
+ usb_write32(Adapter, REG_LEDCFG0, usb_read32(Adapter, REG_LEDCFG0) | BIT(23));
+ phy_set_bb_reg(Adapter, rFPGA0_XAB_RFParameter, BIT(13), 0x01);
if (phy_query_bb_reg(Adapter, rFPGA0_XA_RFInterfaceOE, 0x300) == Antenna_A)
haldata->CurAntenna = Antenna_A;
if (adapt->pwrctrlpriv.bHWPowerdown) {
val8 = usb_read8(adapt, REG_HSISR);
- DBG_88E("pwrdown, 0x5c(BIT7)=%02x\n", val8);
- rfpowerstate = (val8 & BIT7) ? rf_off : rf_on;
+ DBG_88E("pwrdown, 0x5c(BIT(7))=%02x\n", val8);
+ rfpowerstate = (val8 & BIT(7)) ? rf_off : rf_on;
} else { /* rf on/off */
- usb_write8(adapt, REG_MAC_PINMUX_CFG, usb_read8(adapt, REG_MAC_PINMUX_CFG)&~(BIT3));
+ usb_write8(adapt, REG_MAC_PINMUX_CFG, usb_read8(adapt, REG_MAC_PINMUX_CFG)&~(BIT(3)));
val8 = usb_read8(adapt, REG_GPIO_IO_SEL);
DBG_88E("GPIO_IN=%02x\n", val8);
- rfpowerstate = (val8 & BIT3) ? rf_on : rf_off;
+ rfpowerstate = (val8 & BIT(3)) ? rf_on : rf_off;
}
return rfpowerstate;
} /* HalDetectPwrDownMode */
if (Adapter->registrypriv.mp_mode == 1) {
_InitRxSetting(Adapter);
Adapter->bFWReady = false;
- haldata->fw_ractrl = false;
} else {
status = rtl88eu_download_fw(Adapter);
if (status) {
DBG_88E("%s: Download Firmware failed!!\n", __func__);
Adapter->bFWReady = false;
- haldata->fw_ractrl = false;
return status;
} else {
RT_TRACE(_module_hci_hal_init_c_, _drv_info_, ("Initializeadapt8192CSdio(): Download Firmware Success!!\n"));
Adapter->bFWReady = true;
- haldata->fw_ractrl = false;
}
}
rtl8188e_InitializeFirmwareVars(Adapter);
/* Enable TX Report */
/* Enable Tx Report Timer */
value8 = usb_read8(Adapter, REG_TX_RPT_CTRL);
- usb_write8(Adapter, REG_TX_RPT_CTRL, (value8|BIT1|BIT0));
+ usb_write8(Adapter, REG_TX_RPT_CTRL, (value8 | BIT(1) | BIT(0)));
/* Set MAX RPT MACID */
usb_write8(Adapter, REG_TX_RPT_CTRL+1, 2);/* FOR sta mode ,0: bc/mc ,1:AP */
/* Tx RPT Timer. Unit: 32us */
usb_write8(Adapter, REG_USB_HRPWM, 0);
/* ack for xmit mgmt frames. */
- usb_write32(Adapter, REG_FWHW_TXQ_CTRL, usb_read32(Adapter, REG_FWHW_TXQ_CTRL)|BIT(12));
+ usb_write32(Adapter, REG_FWHW_TXQ_CTRL, usb_read32(Adapter, REG_FWHW_TXQ_CTRL) | BIT(12));
exit:
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_END);
/* Stop Tx Report Timer. 0x4EC[Bit1]=b'0 */
val8 = usb_read8(Adapter, REG_TX_RPT_CTRL);
- usb_write8(Adapter, REG_TX_RPT_CTRL, val8&(~BIT1));
+ usb_write8(Adapter, REG_TX_RPT_CTRL, val8&(~BIT(1)));
/* stop rx */
usb_write8(Adapter, REG_CR, 0x0);
/* YJ,add,111212 */
/* Disable 32k */
val8 = usb_read8(Adapter, REG_32K_CTRL);
- usb_write8(Adapter, REG_32K_CTRL, val8&(~BIT0));
+ usb_write8(Adapter, REG_32K_CTRL, val8&(~BIT(0)));
/* Card disable power action flow */
rtl88eu_pwrseqcmdparsing(Adapter, PWR_CUT_ALL_MSK,
/* Reset MCU IO Wrapper */
val8 = usb_read8(Adapter, REG_RSV_CTRL+1);
- usb_write8(Adapter, REG_RSV_CTRL+1, (val8&(~BIT3)));
+ usb_write8(Adapter, REG_RSV_CTRL+1, (val8&(~BIT(3))));
val8 = usb_read8(Adapter, REG_RSV_CTRL+1);
- usb_write8(Adapter, REG_RSV_CTRL+1, val8|BIT3);
+ usb_write8(Adapter, REG_RSV_CTRL+1, val8 | BIT(3));
/* YJ,test add, 111207. For Power Consumption. */
val8 = usb_read8(Adapter, GPIO_IN);
/* 2010.03.01. Marked by tynli. No need to call workitem beacause we record the value */
/* which should be read from register to a global variable. */
- usb_write8(adapt, REG_FWHW_TXQ_CTRL+2, (haldata->RegFwHwTxQCtrl) | BIT6);
- haldata->RegFwHwTxQCtrl |= BIT6;
+ usb_write8(adapt, REG_FWHW_TXQ_CTRL+2, (haldata->RegFwHwTxQCtrl) | BIT(6));
+ haldata->RegFwHwTxQCtrl |= BIT(6);
usb_write8(adapt, REG_TBTT_PROHIBIT+1, 0xff);
- haldata->RegReg542 |= BIT0;
+ haldata->RegReg542 |= BIT(0);
usb_write8(adapt, REG_TBTT_PROHIBIT+2, haldata->RegReg542);
}
/* 2010.03.01. Marked by tynli. No need to call workitem beacause we record the value */
/* which should be read from register to a global variable. */
- usb_write8(adapt, REG_FWHW_TXQ_CTRL+2, (haldata->RegFwHwTxQCtrl) & (~BIT6));
- haldata->RegFwHwTxQCtrl &= (~BIT6);
+ usb_write8(adapt, REG_FWHW_TXQ_CTRL+2, (haldata->RegFwHwTxQCtrl) & (~BIT(6)));
+ haldata->RegFwHwTxQCtrl &= (~BIT(6));
usb_write8(adapt, REG_TBTT_PROHIBIT+1, 0x64);
- haldata->RegReg542 &= ~(BIT0);
+ haldata->RegReg542 &= ~(BIT(0));
usb_write8(adapt, REG_TBTT_PROHIBIT+2, haldata->RegReg542);
/* todo: CheckFwRsvdPageContent(Adapter); 2010.06.23. Added by tynli. */
u8 mode = *((u8 *)val);
/* disable Port0 TSF update */
- usb_write8(Adapter, REG_BCN_CTRL, usb_read8(Adapter, REG_BCN_CTRL)|BIT(4));
+ usb_write8(Adapter, REG_BCN_CTRL, usb_read8(Adapter, REG_BCN_CTRL) | BIT(4));
/* set net_type */
val8 = usb_read8(Adapter, MSR)&0x0c;
usb_write32(Adapter, REG_TSFTR+4, tsf>>32);
/* enable related TSF function */
- usb_write8(Adapter, REG_BCN_CTRL, usb_read8(Adapter, REG_BCN_CTRL)|BIT(3));
+ usb_write8(Adapter, REG_BCN_CTRL, usb_read8(Adapter, REG_BCN_CTRL) | BIT(3));
if (((pmlmeinfo->state&0x03) == WIFI_FW_ADHOC_STATE) || ((pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE))
ResumeTxBeacon(Adapter);
usb_write16(Adapter, REG_RXFLTMAP2, 0x00);
/* reset TSF */
- usb_write8(Adapter, REG_DUAL_TSF_RST, (BIT(0)|BIT(1)));
+ usb_write8(Adapter, REG_DUAL_TSF_RST, (BIT(0) | BIT(1)));
/* disable update TSF */
- usb_write8(Adapter, REG_BCN_CTRL, usb_read8(Adapter, REG_BCN_CTRL)|BIT(4));
+ usb_write8(Adapter, REG_BCN_CTRL, usb_read8(Adapter, REG_BCN_CTRL) | BIT(4));
break;
case HW_VAR_MLME_SITESURVEY:
if (*((u8 *)val)) { /* under sitesurvey */
usb_write16(Adapter, REG_RXFLTMAP2, 0x00);
/* disable update TSF */
- usb_write8(Adapter, REG_BCN_CTRL, usb_read8(Adapter, REG_BCN_CTRL)|BIT(4));
+ usb_write8(Adapter, REG_BCN_CTRL, usb_read8(Adapter, REG_BCN_CTRL) | BIT(4));
} else { /* sitesurvey done */
struct mlme_ext_priv *pmlmeext = &Adapter->mlmeextpriv;
struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info);
}
break;
case HW_VAR_CAM_INVALID_ALL:
- usb_write32(Adapter, RWCAM, BIT(31)|BIT(30));
+ usb_write32(Adapter, RWCAM, BIT(31) | BIT(30));
break;
case HW_VAR_CAM_WRITE:
{
/* Forece leave RF low power mode for 1T1R to prevent conficting setting in Fw power */
/* saving sequence. 2010.06.07. Added by tynli. Suggested by SD3 yschang. */
- if ((psmode != PS_MODE_ACTIVE) && (!IS_92C_SERIAL(haldata->VersionID)))
+ if (psmode != PS_MODE_ACTIVE)
ODM_RF_Saving(podmpriv, true);
rtl8188e_set_FwPwrMode_cmd(Adapter, psmode);
}
break;
case HW_VAR_BCN_VALID:
/* BCN_VALID, BIT16 of REG_TDECTRL = BIT0 of REG_TDECTRL+2, write 1 to clear, Clear by sw */
- usb_write8(Adapter, REG_TDECTRL+2, usb_read8(Adapter, REG_TDECTRL+2) | BIT0);
+ usb_write8(Adapter, REG_TDECTRL+2, usb_read8(Adapter, REG_TDECTRL+2) | BIT(0));
break;
default:
break;
break;
case HW_VAR_BCN_VALID:
/* BCN_VALID, BIT16 of REG_TDECTRL = BIT0 of REG_TDECTRL+2 */
- val[0] = (BIT0 & usb_read8(Adapter, REG_TDECTRL+2)) ? true : false;
+ val[0] = (BIT(0) & usb_read8(Adapter, REG_TDECTRL+2)) ? true : false;
break;
case HW_VAR_DM_FLAG:
val[0] = podmpriv->SupportAbility;
return bResult;
}
-/* */
-/* Description: */
-/* Change default setting of specified variable. */
-/* */
-static u8 SetHalDefVar8188EUsb(struct adapter *Adapter, enum hal_def_variable eVariable, void *pValue)
-{
- struct hal_data_8188e *haldata = GET_HAL_DATA(Adapter);
- u8 bResult = _SUCCESS;
-
- switch (eVariable) {
- case HAL_DEF_DBG_DM_FUNC:
- {
- u8 dm_func = *((u8 *)pValue);
- struct odm_dm_struct *podmpriv = &haldata->odmpriv;
-
- if (dm_func == 0) { /* disable all dynamic func */
- podmpriv->SupportAbility = DYNAMIC_FUNC_DISABLE;
- DBG_88E("==> Disable all dynamic function...\n");
- } else if (dm_func == 1) {/* disable DIG */
- podmpriv->SupportAbility &= (~DYNAMIC_BB_DIG);
- DBG_88E("==> Disable DIG...\n");
- } else if (dm_func == 2) {/* disable High power */
- podmpriv->SupportAbility &= (~DYNAMIC_BB_DYNAMIC_TXPWR);
- } else if (dm_func == 3) {/* disable tx power tracking */
- podmpriv->SupportAbility &= (~DYNAMIC_RF_CALIBRATION);
- DBG_88E("==> Disable tx power tracking...\n");
- } else if (dm_func == 5) {/* disable antenna diversity */
- podmpriv->SupportAbility &= (~DYNAMIC_BB_ANT_DIV);
- } else if (dm_func == 6) {/* turn on all dynamic func */
- if (!(podmpriv->SupportAbility & DYNAMIC_BB_DIG)) {
- struct rtw_dig *pDigTable = &podmpriv->DM_DigTable;
- pDigTable->CurIGValue = usb_read8(Adapter, 0xc50);
- }
- podmpriv->SupportAbility = DYNAMIC_ALL_FUNC_ENABLE;
- DBG_88E("==> Turn on all dynamic function...\n");
- }
- }
- break;
- case HAL_DEF_DBG_DUMP_RXPKT:
- haldata->bDumpRxPkt = *((u8 *)pValue);
- break;
- case HAL_DEF_DBG_DUMP_TXPKT:
- haldata->bDumpTxPkt = *((u8 *)pValue);
- break;
- case HW_DEF_FA_CNT_DUMP:
- {
- u8 bRSSIDump = *((u8 *)pValue);
- struct odm_dm_struct *dm_ocm = &(haldata->odmpriv);
- if (bRSSIDump)
- dm_ocm->DebugComponents = ODM_COMP_DIG|ODM_COMP_FA_CNT;
- else
- dm_ocm->DebugComponents = 0;
- }
- break;
- case HW_DEF_ODM_DBG_FLAG:
- {
- u64 DebugComponents = *((u64 *)pValue);
- struct odm_dm_struct *dm_ocm = &(haldata->odmpriv);
- dm_ocm->DebugComponents = DebugComponents;
- }
- break;
- default:
- bResult = _FAIL;
- break;
- }
-
- return bResult;
-}
-
static void UpdateHalRAMask8188EUsb(struct adapter *adapt, u32 mac_id, u8 rssi_level)
{
u8 init_rate = 0;
break;
}
- rate_bitmap = 0x0fffffff;
rate_bitmap = ODM_Get_Rate_Bitmap(&haldata->odmpriv, mac_id, mask, rssi_level);
DBG_88E("%s => mac_id:%d, networkType:0x%02x, mask:0x%08x\n\t ==> rssi_level:%d, rate_bitmap:0x%08x\n",
__func__, mac_id, networkType, mask, rssi_level, rate_bitmap);
init_rate = get_highest_rate_idx(mask)&0x3f;
- if (haldata->fw_ractrl) {
- u8 arg;
-
- arg = mac_id & 0x1f;/* MACID */
- arg |= BIT(7);
- if (shortGIrate)
- arg |= BIT(5);
- mask |= ((raid << 28) & 0xf0000000);
- DBG_88E("update raid entry, mask=0x%x, arg=0x%x\n", mask, arg);
- psta->ra_mask = mask;
- mask |= ((raid << 28) & 0xf0000000);
+ ODM_RA_UpdateRateInfo_8188E(&haldata->odmpriv, mac_id,
+ raid, mask, shortGIrate);
- /* to do ,for 8188E-SMIC */
- rtl8188e_set_raid_cmd(adapt, mask);
- } else {
- ODM_RA_UpdateRateInfo_8188E(&(haldata->odmpriv),
- mac_id,
- raid,
- mask,
- shortGIrate
- );
- }
/* set ra_id */
psta->raid = raid;
psta->init_rate = init_rate;
ResumeTxBeacon(adapt);
- usb_write8(adapt, bcn_ctrl_reg, usb_read8(adapt, bcn_ctrl_reg)|BIT(1));
+ usb_write8(adapt, bcn_ctrl_reg, usb_read8(adapt, bcn_ctrl_reg) | BIT(1));
}
static void rtl8188eu_init_default_value(struct adapter *adapt)
pwrctrlpriv = &adapt->pwrctrlpriv;
/* init default value */
- haldata->fw_ractrl = false;
if (!pwrctrlpriv->bkeepfwalive)
haldata->LastHMEBoxNum = 0;
halfunc->SetHwRegHandler = &SetHwReg8188EU;
halfunc->GetHwRegHandler = &GetHwReg8188EU;
halfunc->GetHalDefVarHandler = &GetHalDefVar8188EUsb;
- halfunc->SetHalDefVarHandler = &SetHalDefVar8188EUsb;
halfunc->UpdateRAMaskHandler = &UpdateHalRAMask8188EUsb;
halfunc->SetBeaconRelatedRegistersHandler = &SetBeaconRelatedRegisters8188EUsb;
Code Review / kvmfornfv.git / blobdiff