Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / staging / rtl8188eu / hal / rtl8188e_hal_init.c
diff --git a/kernel/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c b/kernel/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c
new file mode 100644 (file)
index 0000000..7904d22
--- /dev/null
@@ -0,0 +1,694 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#define _HAL_INIT_C_
+
+#include <linux/firmware.h>
+#include <linux/vmalloc.h>
+#include <drv_types.h>
+#include <rtw_efuse.h>
+#include <phy.h>
+#include <rtl8188e_hal.h>
+
+#include <rtw_iol.h>
+
+void iol_mode_enable(struct adapter *padapter, u8 enable)
+{
+       u8 reg_0xf0 = 0;
+
+       if (enable) {
+               /* Enable initial offload */
+               reg_0xf0 = usb_read8(padapter, REG_SYS_CFG);
+               usb_write8(padapter, REG_SYS_CFG, reg_0xf0|SW_OFFLOAD_EN);
+
+               if (!padapter->bFWReady) {
+                       DBG_88E("bFWReady == false call reset 8051...\n");
+                       _8051Reset88E(padapter);
+               }
+
+       } else {
+               /* disable initial offload */
+               reg_0xf0 = usb_read8(padapter, REG_SYS_CFG);
+               usb_write8(padapter, REG_SYS_CFG, reg_0xf0 & ~SW_OFFLOAD_EN);
+       }
+}
+
+s32 iol_execute(struct adapter *padapter, u8 control)
+{
+       s32 status = _FAIL;
+       u8 reg_0x88 = 0;
+       u32 start = 0, passing_time = 0;
+
+       control = control&0x0f;
+       reg_0x88 = usb_read8(padapter, REG_HMEBOX_E0);
+       usb_write8(padapter, REG_HMEBOX_E0,  reg_0x88|control);
+
+       start = jiffies;
+       while ((reg_0x88 = usb_read8(padapter, REG_HMEBOX_E0)) & control &&
+              (passing_time = rtw_get_passing_time_ms(start)) < 1000) {
+               ;
+       }
+
+       reg_0x88 = usb_read8(padapter, REG_HMEBOX_E0);
+       status = (reg_0x88 & control) ? _FAIL : _SUCCESS;
+       if (reg_0x88 & control<<4)
+               status = _FAIL;
+       return status;
+}
+
+static s32 iol_InitLLTTable(struct adapter *padapter, u8 txpktbuf_bndy)
+{
+       s32 rst = _SUCCESS;
+       iol_mode_enable(padapter, 1);
+       usb_write8(padapter, REG_TDECTRL+1, txpktbuf_bndy);
+       rst = iol_execute(padapter, CMD_INIT_LLT);
+       iol_mode_enable(padapter, 0);
+       return rst;
+}
+
+
+s32 rtl8188e_iol_efuse_patch(struct adapter *padapter)
+{
+       s32     result = _SUCCESS;
+
+       DBG_88E("==> %s\n", __func__);
+       if (rtw_IOL_applied(padapter)) {
+               iol_mode_enable(padapter, 1);
+               result = iol_execute(padapter, CMD_READ_EFUSE_MAP);
+               if (result == _SUCCESS)
+                       result = iol_execute(padapter, CMD_EFUSE_PATCH);
+
+               iol_mode_enable(padapter, 0);
+       }
+       return result;
+}
+
+#define MAX_REG_BOLCK_SIZE     196
+
+void _8051Reset88E(struct adapter *padapter)
+{
+       u8 u1bTmp;
+
+       u1bTmp = usb_read8(padapter, REG_SYS_FUNC_EN+1);
+       usb_write8(padapter, REG_SYS_FUNC_EN+1, u1bTmp&(~BIT2));
+       usb_write8(padapter, REG_SYS_FUNC_EN+1, u1bTmp|(BIT2));
+       DBG_88E("=====> _8051Reset88E(): 8051 reset success .\n");
+}
+
+void rtl8188e_InitializeFirmwareVars(struct adapter *padapter)
+{
+       struct hal_data_8188e *pHalData = GET_HAL_DATA(padapter);
+
+       /*  Init Fw LPS related. */
+       padapter->pwrctrlpriv.bFwCurrentInPSMode = false;
+
+       /*  Init H2C counter. by tynli. 2009.12.09. */
+       pHalData->LastHMEBoxNum = 0;
+}
+
+static void rtl8188e_free_hal_data(struct adapter *padapter)
+{
+       kfree(padapter->HalData);
+       padapter->HalData = NULL;
+}
+
+static struct HAL_VERSION ReadChipVersion8188E(struct adapter *padapter)
+{
+       u32                             value32;
+       struct HAL_VERSION              ChipVersion;
+       struct hal_data_8188e   *pHalData;
+
+       pHalData = GET_HAL_DATA(padapter);
+
+       value32 = usb_read32(padapter, REG_SYS_CFG);
+       ChipVersion.ICType = CHIP_8188E;
+       ChipVersion.ChipType = ((value32 & RTL_ID) ? TEST_CHIP : NORMAL_CHIP);
+
+       ChipVersion.RFType = RF_TYPE_1T1R;
+       ChipVersion.VendorType = ((value32 & VENDOR_ID) ? CHIP_VENDOR_UMC : CHIP_VENDOR_TSMC);
+       ChipVersion.CUTVersion = (value32 & CHIP_VER_RTL_MASK)>>CHIP_VER_RTL_SHIFT; /*  IC version (CUT) */
+
+       /*  For regulator mode. by tynli. 2011.01.14 */
+       pHalData->RegulatorMode = ((value32 & TRP_BT_EN) ? RT_LDO_REGULATOR : RT_SWITCHING_REGULATOR);
+
+       ChipVersion.ROMVer = 0; /*  ROM code version. */
+
+       dump_chip_info(ChipVersion);
+
+       pHalData->VersionID = ChipVersion;
+
+       if (IS_1T2R(ChipVersion)) {
+               pHalData->rf_type = RF_1T2R;
+               pHalData->NumTotalRFPath = 2;
+       } else if (IS_2T2R(ChipVersion)) {
+               pHalData->rf_type = RF_2T2R;
+               pHalData->NumTotalRFPath = 2;
+       } else{
+               pHalData->rf_type = RF_1T1R;
+               pHalData->NumTotalRFPath = 1;
+       }
+
+       MSG_88E("RF_Type is %x!!\n", pHalData->rf_type);
+
+       return ChipVersion;
+}
+
+static void rtl8188e_read_chip_version(struct adapter *padapter)
+{
+       ReadChipVersion8188E(padapter);
+}
+
+static void rtl8188e_SetHalODMVar(struct adapter *Adapter, enum hal_odm_variable eVariable, void *pValue1, bool bSet)
+{
+       struct hal_data_8188e   *pHalData = GET_HAL_DATA(Adapter);
+       struct odm_dm_struct *podmpriv = &pHalData->odmpriv;
+       switch (eVariable) {
+       case HAL_ODM_STA_INFO:
+               {
+                       struct sta_info *psta = pValue1;
+
+                       if (bSet) {
+                               DBG_88E("### Set STA_(%d) info\n", psta->mac_id);
+                               ODM_CmnInfoPtrArrayHook(podmpriv, ODM_CMNINFO_STA_STATUS, psta->mac_id, psta);
+                               ODM_RAInfo_Init(podmpriv, psta->mac_id);
+                       } else {
+                               DBG_88E("### Clean STA_(%d) info\n", psta->mac_id);
+                               ODM_CmnInfoPtrArrayHook(podmpriv, ODM_CMNINFO_STA_STATUS, psta->mac_id, NULL);
+                      }
+               }
+               break;
+       case HAL_ODM_P2P_STATE:
+                       ODM_CmnInfoUpdate(podmpriv, ODM_CMNINFO_WIFI_DIRECT, bSet);
+               break;
+       case HAL_ODM_WIFI_DISPLAY_STATE:
+                       ODM_CmnInfoUpdate(podmpriv, ODM_CMNINFO_WIFI_DISPLAY, bSet);
+               break;
+       default:
+               break;
+       }
+}
+
+static void hal_notch_filter_8188e(struct adapter *adapter, bool enable)
+{
+       if (enable) {
+               DBG_88E("Enable notch filter\n");
+               usb_write8(adapter, rOFDM0_RxDSP+1, usb_read8(adapter, rOFDM0_RxDSP+1) | BIT1);
+       } else {
+               DBG_88E("Disable notch filter\n");
+               usb_write8(adapter, rOFDM0_RxDSP+1, usb_read8(adapter, rOFDM0_RxDSP+1) & ~BIT1);
+       }
+}
+void rtl8188e_set_hal_ops(struct hal_ops *pHalFunc)
+{
+       pHalFunc->free_hal_data = &rtl8188e_free_hal_data;
+
+       pHalFunc->dm_init = &rtl8188e_init_dm_priv;
+
+       pHalFunc->read_chip_version = &rtl8188e_read_chip_version;
+
+       pHalFunc->set_bwmode_handler = &phy_set_bw_mode;
+       pHalFunc->set_channel_handler = &phy_sw_chnl;
+
+       pHalFunc->hal_dm_watchdog = &rtl8188e_HalDmWatchDog;
+
+       pHalFunc->Add_RateATid = &rtl8188e_Add_RateATid;
+
+       pHalFunc->AntDivBeforeLinkHandler = &AntDivBeforeLink8188E;
+       pHalFunc->AntDivCompareHandler = &AntDivCompare8188E;
+       pHalFunc->read_rfreg = &phy_query_rf_reg;
+       pHalFunc->write_rfreg = &phy_set_rf_reg;
+
+       pHalFunc->sreset_init_value = &sreset_init_value;
+       pHalFunc->sreset_get_wifi_status  = &sreset_get_wifi_status;
+
+       pHalFunc->SetHalODMVarHandler = &rtl8188e_SetHalODMVar;
+
+       pHalFunc->hal_notch_filter = &hal_notch_filter_8188e;
+}
+
+/*  */
+/*  */
+/*  LLT R/W/Init function */
+/*  */
+/*  */
+static s32 _LLTWrite(struct adapter *padapter, u32 address, u32 data)
+{
+       s32     status = _SUCCESS;
+       s32     count = 0;
+       u32     value = _LLT_INIT_ADDR(address) | _LLT_INIT_DATA(data) | _LLT_OP(_LLT_WRITE_ACCESS);
+       u16     LLTReg = REG_LLT_INIT;
+
+       usb_write32(padapter, LLTReg, value);
+
+       /* polling */
+       do {
+               value = usb_read32(padapter, LLTReg);
+               if (_LLT_NO_ACTIVE == _LLT_OP_VALUE(value))
+                       break;
+
+               if (count > POLLING_LLT_THRESHOLD) {
+                       RT_TRACE(_module_hal_init_c_, _drv_err_, ("Failed to polling write LLT done at address %d!\n", address));
+                       status = _FAIL;
+                       break;
+               }
+       } while (count++);
+
+       return status;
+}
+
+s32 InitLLTTable(struct adapter *padapter, u8 txpktbuf_bndy)
+{
+       s32     status = _FAIL;
+       u32     i;
+       u32     Last_Entry_Of_TxPktBuf = LAST_ENTRY_OF_TX_PKT_BUFFER;/*  176, 22k */
+
+       if (rtw_IOL_applied(padapter)) {
+               status = iol_InitLLTTable(padapter, txpktbuf_bndy);
+       } else {
+               for (i = 0; i < (txpktbuf_bndy - 1); i++) {
+                       status = _LLTWrite(padapter, i, i + 1);
+                       if (_SUCCESS != status)
+                               return status;
+               }
+
+               /*  end of list */
+               status = _LLTWrite(padapter, (txpktbuf_bndy - 1), 0xFF);
+               if (_SUCCESS != status)
+                       return status;
+
+               /*  Make the other pages as ring buffer */
+               /*  This ring buffer is used as beacon buffer if we config this MAC as two MAC transfer. */
+               /*  Otherwise used as local loopback buffer. */
+               for (i = txpktbuf_bndy; i < Last_Entry_Of_TxPktBuf; i++) {
+                       status = _LLTWrite(padapter, i, (i + 1));
+                       if (_SUCCESS != status)
+                               return status;
+               }
+
+               /*  Let last entry point to the start entry of ring buffer */
+               status = _LLTWrite(padapter, Last_Entry_Of_TxPktBuf, txpktbuf_bndy);
+               if (_SUCCESS != status) {
+                       return status;
+               }
+       }
+
+       return status;
+}
+
+void
+Hal_InitPGData88E(struct adapter *padapter)
+{
+       struct eeprom_priv *pEEPROM = GET_EEPROM_EFUSE_PRIV(padapter);
+
+       if (!pEEPROM->bautoload_fail_flag) { /*  autoload OK. */
+               if (!is_boot_from_eeprom(padapter)) {
+                       /*  Read EFUSE real map to shadow. */
+                       EFUSE_ShadowMapUpdate(padapter, EFUSE_WIFI);
+               }
+       } else {/* autoload fail */
+               RT_TRACE(_module_hci_hal_init_c_, _drv_notice_, ("AutoLoad Fail reported from CR9346!!\n"));
+               /* update to default value 0xFF */
+               if (!is_boot_from_eeprom(padapter))
+                       EFUSE_ShadowMapUpdate(padapter, EFUSE_WIFI);
+       }
+}
+
+void
+Hal_EfuseParseIDCode88E(
+               struct adapter *padapter,
+               u8 *hwinfo
+       )
+{
+       struct eeprom_priv *pEEPROM = GET_EEPROM_EFUSE_PRIV(padapter);
+       u16                     EEPROMId;
+
+       /*  Checl 0x8129 again for making sure autoload status!! */
+       EEPROMId = le16_to_cpu(*((__le16 *)hwinfo));
+       if (EEPROMId != RTL_EEPROM_ID) {
+               DBG_88E("EEPROM ID(%#x) is invalid!!\n", EEPROMId);
+               pEEPROM->bautoload_fail_flag = true;
+       } else {
+               pEEPROM->bautoload_fail_flag = false;
+       }
+
+       DBG_88E("EEPROM ID = 0x%04x\n", EEPROMId);
+}
+
+static void Hal_ReadPowerValueFromPROM_8188E(struct txpowerinfo24g *pwrInfo24G, u8 *PROMContent, bool AutoLoadFail)
+{
+       u32 rfPath, eeAddr = EEPROM_TX_PWR_INX_88E, group, TxCount = 0;
+
+       memset(pwrInfo24G, 0, sizeof(struct txpowerinfo24g));
+
+       if (AutoLoadFail) {
+               for (rfPath = 0; rfPath < MAX_RF_PATH; rfPath++) {
+                       /* 2.4G default value */
+                       for (group = 0; group < MAX_CHNL_GROUP_24G; group++) {
+                               pwrInfo24G->IndexCCK_Base[rfPath][group] =      EEPROM_DEFAULT_24G_INDEX;
+                               pwrInfo24G->IndexBW40_Base[rfPath][group] =     EEPROM_DEFAULT_24G_INDEX;
+                       }
+                       for (TxCount = 0; TxCount < MAX_TX_COUNT; TxCount++) {
+                               if (TxCount == 0) {
+                                       pwrInfo24G->BW20_Diff[rfPath][0] = EEPROM_DEFAULT_24G_HT20_DIFF;
+                                       pwrInfo24G->OFDM_Diff[rfPath][0] = EEPROM_DEFAULT_24G_OFDM_DIFF;
+                               } else {
+                                       pwrInfo24G->BW20_Diff[rfPath][TxCount] = EEPROM_DEFAULT_DIFF;
+                                       pwrInfo24G->BW40_Diff[rfPath][TxCount] = EEPROM_DEFAULT_DIFF;
+                                       pwrInfo24G->CCK_Diff[rfPath][TxCount] = EEPROM_DEFAULT_DIFF;
+                                       pwrInfo24G->OFDM_Diff[rfPath][TxCount] = EEPROM_DEFAULT_DIFF;
+                               }
+                       }
+               }
+               return;
+       }
+
+       for (rfPath = 0; rfPath < MAX_RF_PATH; rfPath++) {
+               /* 2.4G default value */
+               for (group = 0; group < MAX_CHNL_GROUP_24G; group++) {
+                       pwrInfo24G->IndexCCK_Base[rfPath][group] =      PROMContent[eeAddr++];
+                       if (pwrInfo24G->IndexCCK_Base[rfPath][group] == 0xFF)
+                               pwrInfo24G->IndexCCK_Base[rfPath][group] = EEPROM_DEFAULT_24G_INDEX;
+               }
+               for (group = 0; group < MAX_CHNL_GROUP_24G-1; group++) {
+                       pwrInfo24G->IndexBW40_Base[rfPath][group] =     PROMContent[eeAddr++];
+                       if (pwrInfo24G->IndexBW40_Base[rfPath][group] == 0xFF)
+                               pwrInfo24G->IndexBW40_Base[rfPath][group] =     EEPROM_DEFAULT_24G_INDEX;
+               }
+               for (TxCount = 0; TxCount < MAX_TX_COUNT; TxCount++) {
+                       if (TxCount == 0) {
+                               pwrInfo24G->BW40_Diff[rfPath][TxCount] = 0;
+                               if (PROMContent[eeAddr] == 0xFF) {
+                                       pwrInfo24G->BW20_Diff[rfPath][TxCount] = EEPROM_DEFAULT_24G_HT20_DIFF;
+                               } else {
+                                       pwrInfo24G->BW20_Diff[rfPath][TxCount] = (PROMContent[eeAddr]&0xf0)>>4;
+                                       if (pwrInfo24G->BW20_Diff[rfPath][TxCount] & BIT3)              /* 4bit sign number to 8 bit sign number */
+                                               pwrInfo24G->BW20_Diff[rfPath][TxCount] |= 0xF0;
+                               }
+
+                               if (PROMContent[eeAddr] == 0xFF) {
+                                       pwrInfo24G->OFDM_Diff[rfPath][TxCount] =        EEPROM_DEFAULT_24G_OFDM_DIFF;
+                               } else {
+                                       pwrInfo24G->OFDM_Diff[rfPath][TxCount] =        (PROMContent[eeAddr]&0x0f);
+                                       if (pwrInfo24G->OFDM_Diff[rfPath][TxCount] & BIT3)              /* 4bit sign number to 8 bit sign number */
+                                               pwrInfo24G->OFDM_Diff[rfPath][TxCount] |= 0xF0;
+                               }
+                               pwrInfo24G->CCK_Diff[rfPath][TxCount] = 0;
+                               eeAddr++;
+                       } else {
+                               if (PROMContent[eeAddr] == 0xFF) {
+                                       pwrInfo24G->BW40_Diff[rfPath][TxCount] =        EEPROM_DEFAULT_DIFF;
+                               } else {
+                                       pwrInfo24G->BW40_Diff[rfPath][TxCount] =        (PROMContent[eeAddr]&0xf0)>>4;
+                                       if (pwrInfo24G->BW40_Diff[rfPath][TxCount] & BIT3)              /* 4bit sign number to 8 bit sign number */
+                                               pwrInfo24G->BW40_Diff[rfPath][TxCount] |= 0xF0;
+                               }
+
+                               if (PROMContent[eeAddr] == 0xFF) {
+                                       pwrInfo24G->BW20_Diff[rfPath][TxCount] =        EEPROM_DEFAULT_DIFF;
+                               } else {
+                                       pwrInfo24G->BW20_Diff[rfPath][TxCount] =        (PROMContent[eeAddr]&0x0f);
+                                       if (pwrInfo24G->BW20_Diff[rfPath][TxCount] & BIT3)              /* 4bit sign number to 8 bit sign number */
+                                               pwrInfo24G->BW20_Diff[rfPath][TxCount] |= 0xF0;
+                               }
+                               eeAddr++;
+
+                               if (PROMContent[eeAddr] == 0xFF) {
+                                       pwrInfo24G->OFDM_Diff[rfPath][TxCount] = EEPROM_DEFAULT_DIFF;
+                               } else {
+                                       pwrInfo24G->OFDM_Diff[rfPath][TxCount] =        (PROMContent[eeAddr]&0xf0)>>4;
+                                       if (pwrInfo24G->OFDM_Diff[rfPath][TxCount] & BIT3)              /* 4bit sign number to 8 bit sign number */
+                                               pwrInfo24G->OFDM_Diff[rfPath][TxCount] |= 0xF0;
+                               }
+
+                               if (PROMContent[eeAddr] == 0xFF) {
+                                       pwrInfo24G->CCK_Diff[rfPath][TxCount] = EEPROM_DEFAULT_DIFF;
+                               } else {
+                                       pwrInfo24G->CCK_Diff[rfPath][TxCount] = (PROMContent[eeAddr]&0x0f);
+                                       if (pwrInfo24G->CCK_Diff[rfPath][TxCount] & BIT3)               /* 4bit sign number to 8 bit sign number */
+                                               pwrInfo24G->CCK_Diff[rfPath][TxCount] |= 0xF0;
+                               }
+                               eeAddr++;
+                       }
+               }
+       }
+}
+
+static u8 Hal_GetChnlGroup88E(u8 chnl, u8 *pGroup)
+{
+       u8 bIn24G = true;
+
+       if (chnl <= 14) {
+               bIn24G = true;
+
+               if (chnl < 3)                   /*  Channel 1-2 */
+                       *pGroup = 0;
+               else if (chnl < 6)              /*  Channel 3-5 */
+                       *pGroup = 1;
+               else     if (chnl < 9)          /*  Channel 6-8 */
+                       *pGroup = 2;
+               else if (chnl < 12)             /*  Channel 9-11 */
+                       *pGroup = 3;
+               else if (chnl < 14)             /*  Channel 12-13 */
+                       *pGroup = 4;
+               else if (chnl == 14)            /*  Channel 14 */
+                       *pGroup = 5;
+       } else {
+               bIn24G = false;
+
+               if (chnl <= 40)
+                       *pGroup = 0;
+               else if (chnl <= 48)
+                       *pGroup = 1;
+               else     if (chnl <= 56)
+                       *pGroup = 2;
+               else if (chnl <= 64)
+                       *pGroup = 3;
+               else if (chnl <= 104)
+                       *pGroup = 4;
+               else if (chnl <= 112)
+                       *pGroup = 5;
+               else if (chnl <= 120)
+                       *pGroup = 5;
+               else if (chnl <= 128)
+                       *pGroup = 6;
+               else if (chnl <= 136)
+                       *pGroup = 7;
+               else if (chnl <= 144)
+                       *pGroup = 8;
+               else if (chnl <= 153)
+                       *pGroup = 9;
+               else if (chnl <= 161)
+                       *pGroup = 10;
+               else if (chnl <= 177)
+                       *pGroup = 11;
+       }
+       return bIn24G;
+}
+
+void Hal_ReadPowerSavingMode88E(struct adapter *padapter, u8 *hwinfo, bool AutoLoadFail)
+{
+       if (AutoLoadFail) {
+               padapter->pwrctrlpriv.bHWPowerdown = false;
+               padapter->pwrctrlpriv.bSupportRemoteWakeup = false;
+       } else {
+               /* hw power down mode selection , 0:rf-off / 1:power down */
+
+               if (padapter->registrypriv.hwpdn_mode == 2)
+                       padapter->pwrctrlpriv.bHWPowerdown = (hwinfo[EEPROM_RF_FEATURE_OPTION_88E] & BIT4);
+               else
+                       padapter->pwrctrlpriv.bHWPowerdown = padapter->registrypriv.hwpdn_mode;
+
+               /*  decide hw if support remote wakeup function */
+               /*  if hw supported, 8051 (SIE) will generate WeakUP signal(D+/D- toggle) when autoresume */
+               padapter->pwrctrlpriv.bSupportRemoteWakeup = (hwinfo[EEPROM_USB_OPTIONAL_FUNCTION0] & BIT1) ? true : false;
+
+               DBG_88E("%s...bHWPwrPindetect(%x)-bHWPowerdown(%x) , bSupportRemoteWakeup(%x)\n", __func__,
+               padapter->pwrctrlpriv.bHWPwrPindetect, padapter->pwrctrlpriv.bHWPowerdown , padapter->pwrctrlpriv.bSupportRemoteWakeup);
+
+               DBG_88E("### PS params =>  power_mgnt(%x), usbss_enable(%x) ###\n", padapter->registrypriv.power_mgnt, padapter->registrypriv.usbss_enable);
+       }
+}
+
+void Hal_ReadTxPowerInfo88E(struct adapter *padapter, u8 *PROMContent, bool AutoLoadFail)
+{
+       struct hal_data_8188e   *pHalData = GET_HAL_DATA(padapter);
+       struct txpowerinfo24g pwrInfo24G;
+       u8 rfPath, ch, group;
+       u8 bIn24G, TxCount;
+
+       Hal_ReadPowerValueFromPROM_8188E(&pwrInfo24G, PROMContent, AutoLoadFail);
+
+       if (!AutoLoadFail)
+               pHalData->bTXPowerDataReadFromEEPORM = true;
+
+       for (rfPath = 0; rfPath < pHalData->NumTotalRFPath; rfPath++) {
+               for (ch = 0; ch < CHANNEL_MAX_NUMBER; ch++) {
+                       bIn24G = Hal_GetChnlGroup88E(ch, &group);
+                       if (bIn24G) {
+                               pHalData->Index24G_CCK_Base[rfPath][ch] = pwrInfo24G.IndexCCK_Base[rfPath][group];
+                               if (ch == 14)
+                                       pHalData->Index24G_BW40_Base[rfPath][ch] = pwrInfo24G.IndexBW40_Base[rfPath][4];
+                               else
+                                       pHalData->Index24G_BW40_Base[rfPath][ch] = pwrInfo24G.IndexBW40_Base[rfPath][group];
+                       }
+                       if (bIn24G) {
+                               DBG_88E("======= Path %d, Channel %d =======\n", rfPath, ch);
+                               DBG_88E("Index24G_CCK_Base[%d][%d] = 0x%x\n", rfPath, ch , pHalData->Index24G_CCK_Base[rfPath][ch]);
+                               DBG_88E("Index24G_BW40_Base[%d][%d] = 0x%x\n", rfPath, ch , pHalData->Index24G_BW40_Base[rfPath][ch]);
+                       }
+               }
+               for (TxCount = 0; TxCount < MAX_TX_COUNT; TxCount++) {
+                       pHalData->CCK_24G_Diff[rfPath][TxCount] = pwrInfo24G.CCK_Diff[rfPath][TxCount];
+                       pHalData->OFDM_24G_Diff[rfPath][TxCount] = pwrInfo24G.OFDM_Diff[rfPath][TxCount];
+                       pHalData->BW20_24G_Diff[rfPath][TxCount] = pwrInfo24G.BW20_Diff[rfPath][TxCount];
+                       pHalData->BW40_24G_Diff[rfPath][TxCount] = pwrInfo24G.BW40_Diff[rfPath][TxCount];
+                       DBG_88E("======= TxCount %d =======\n", TxCount);
+                       DBG_88E("CCK_24G_Diff[%d][%d] = %d\n", rfPath, TxCount, pHalData->CCK_24G_Diff[rfPath][TxCount]);
+                       DBG_88E("OFDM_24G_Diff[%d][%d] = %d\n", rfPath, TxCount, pHalData->OFDM_24G_Diff[rfPath][TxCount]);
+                       DBG_88E("BW20_24G_Diff[%d][%d] = %d\n", rfPath, TxCount, pHalData->BW20_24G_Diff[rfPath][TxCount]);
+                       DBG_88E("BW40_24G_Diff[%d][%d] = %d\n", rfPath, TxCount, pHalData->BW40_24G_Diff[rfPath][TxCount]);
+               }
+       }
+
+       /*  2010/10/19 MH Add Regulator recognize for CU. */
+       if (!AutoLoadFail) {
+               pHalData->EEPROMRegulatory = (PROMContent[EEPROM_RF_BOARD_OPTION_88E]&0x7);     /* bit0~2 */
+               if (PROMContent[EEPROM_RF_BOARD_OPTION_88E] == 0xFF)
+                       pHalData->EEPROMRegulatory = (EEPROM_DEFAULT_BOARD_OPTION&0x7); /* bit0~2 */
+       } else {
+               pHalData->EEPROMRegulatory = 0;
+       }
+       DBG_88E("EEPROMRegulatory = 0x%x\n", pHalData->EEPROMRegulatory);
+}
+
+void Hal_EfuseParseXtal_8188E(struct adapter *pAdapter, u8 *hwinfo, bool AutoLoadFail)
+{
+       struct hal_data_8188e   *pHalData = GET_HAL_DATA(pAdapter);
+
+       if (!AutoLoadFail) {
+               pHalData->CrystalCap = hwinfo[EEPROM_XTAL_88E];
+               if (pHalData->CrystalCap == 0xFF)
+                       pHalData->CrystalCap = EEPROM_Default_CrystalCap_88E;
+       } else {
+               pHalData->CrystalCap = EEPROM_Default_CrystalCap_88E;
+       }
+       DBG_88E("CrystalCap: 0x%2x\n", pHalData->CrystalCap);
+}
+
+void Hal_EfuseParseBoardType88E(struct adapter *pAdapter, u8 *hwinfo, bool AutoLoadFail)
+{
+       struct hal_data_8188e *pHalData = GET_HAL_DATA(pAdapter);
+
+       if (!AutoLoadFail)
+               pHalData->BoardType = (hwinfo[EEPROM_RF_BOARD_OPTION_88E]
+                                       & 0xE0) >> 5;
+       else
+               pHalData->BoardType = 0;
+       DBG_88E("Board Type: 0x%2x\n", pHalData->BoardType);
+}
+
+void Hal_EfuseParseEEPROMVer88E(struct adapter *padapter, u8 *hwinfo, bool AutoLoadFail)
+{
+       struct hal_data_8188e *pHalData = GET_HAL_DATA(padapter);
+
+       if (!AutoLoadFail) {
+               pHalData->EEPROMVersion = hwinfo[EEPROM_VERSION_88E];
+               if (pHalData->EEPROMVersion == 0xFF)
+                       pHalData->EEPROMVersion = EEPROM_Default_Version;
+       } else {
+               pHalData->EEPROMVersion = 1;
+       }
+       RT_TRACE(_module_hci_hal_init_c_, _drv_info_,
+                ("Hal_EfuseParseEEPROMVer(), EEVer = %d\n",
+                pHalData->EEPROMVersion));
+}
+
+void rtl8188e_EfuseParseChnlPlan(struct adapter *padapter, u8 *hwinfo, bool AutoLoadFail)
+{
+       padapter->mlmepriv.ChannelPlan =
+                hal_com_get_channel_plan(padapter,
+                                         hwinfo ? hwinfo[EEPROM_ChannelPlan_88E] : 0xFF,
+                                         padapter->registrypriv.channel_plan,
+                                         RT_CHANNEL_DOMAIN_WORLD_WIDE_13, AutoLoadFail);
+
+       DBG_88E("mlmepriv.ChannelPlan = 0x%02x\n", padapter->mlmepriv.ChannelPlan);
+}
+
+void Hal_EfuseParseCustomerID88E(struct adapter *padapter, u8 *hwinfo, bool AutoLoadFail)
+{
+       struct hal_data_8188e   *pHalData = GET_HAL_DATA(padapter);
+
+       if (!AutoLoadFail) {
+               pHalData->EEPROMCustomerID = hwinfo[EEPROM_CUSTOMERID_88E];
+       } else {
+               pHalData->EEPROMCustomerID = 0;
+               pHalData->EEPROMSubCustomerID = 0;
+       }
+       DBG_88E("EEPROM Customer ID: 0x%2x\n", pHalData->EEPROMCustomerID);
+}
+
+void Hal_ReadAntennaDiversity88E(struct adapter *pAdapter, u8 *PROMContent, bool AutoLoadFail)
+{
+       struct hal_data_8188e   *pHalData = GET_HAL_DATA(pAdapter);
+       struct registry_priv    *registry_par = &pAdapter->registrypriv;
+
+       if (!AutoLoadFail) {
+               /*  Antenna Diversity setting. */
+               if (registry_par->antdiv_cfg == 2) { /*  2:By EFUSE */
+                       pHalData->AntDivCfg = (PROMContent[EEPROM_RF_BOARD_OPTION_88E]&0x18)>>3;
+                       if (PROMContent[EEPROM_RF_BOARD_OPTION_88E] == 0xFF)
+                               pHalData->AntDivCfg = (EEPROM_DEFAULT_BOARD_OPTION&0x18)>>3;
+               } else {
+                       pHalData->AntDivCfg = registry_par->antdiv_cfg;  /*  0:OFF , 1:ON, 2:By EFUSE */
+               }
+
+               if (registry_par->antdiv_type == 0) {
+                       /* If TRxAntDivType is AUTO in advanced setting, use EFUSE value instead. */
+                       pHalData->TRxAntDivType = PROMContent[EEPROM_RF_ANTENNA_OPT_88E];
+                       if (pHalData->TRxAntDivType == 0xFF)
+                               pHalData->TRxAntDivType = CG_TRX_HW_ANTDIV; /*  For 88EE, 1Tx and 1RxCG are fixed.(1Ant, Tx and RxCG are both on aux port) */
+               } else {
+                       pHalData->TRxAntDivType = registry_par->antdiv_type;
+               }
+
+               if (pHalData->TRxAntDivType == CG_TRX_HW_ANTDIV || pHalData->TRxAntDivType == CGCS_RX_HW_ANTDIV)
+                       pHalData->AntDivCfg = 1; /*  0xC1[3] is ignored. */
+       } else {
+               pHalData->AntDivCfg = 0;
+               pHalData->TRxAntDivType = pHalData->TRxAntDivType; /*  The value in the driver setting of device manager. */
+       }
+       DBG_88E("EEPROM : AntDivCfg = %x, TRxAntDivType = %x\n", pHalData->AntDivCfg, pHalData->TRxAntDivType);
+}
+
+void Hal_ReadThermalMeter_88E(struct adapter *Adapter, u8 *PROMContent, bool AutoloadFail)
+{
+       struct hal_data_8188e   *pHalData = GET_HAL_DATA(Adapter);
+
+       /*  ThermalMeter from EEPROM */
+       if (!AutoloadFail)
+               pHalData->EEPROMThermalMeter = PROMContent[EEPROM_THERMAL_METER_88E];
+       else
+               pHalData->EEPROMThermalMeter = EEPROM_Default_ThermalMeter_88E;
+
+       if (pHalData->EEPROMThermalMeter == 0xff || AutoloadFail) {
+               pHalData->bAPKThermalMeterIgnore = true;
+               pHalData->EEPROMThermalMeter = EEPROM_Default_ThermalMeter_88E;
+       }
+       DBG_88E("ThermalMeter = 0x%x\n", pHalData->EEPROMThermalMeter);
+}