These changes are the raw update to linux-4.4.6-rt14. Kernel sources
[kvmfornfv.git] / kernel / drivers / spi / spi-davinci.c
index 5e99106..7d3af3e 100644 (file)
@@ -139,6 +139,8 @@ struct davinci_spi {
        u32                     (*get_tx)(struct davinci_spi *);
 
        u8                      *bytes_per_word;
+
+       u8                      prescaler_limit;
 };
 
 static struct davinci_spi_config davinci_spi_default_cfg;
@@ -213,18 +215,10 @@ static void davinci_spi_chipselect(struct spi_device *spi, int value)
        struct davinci_spi_config *spicfg = spi->controller_data;
        u8 chip_sel = spi->chip_select;
        u16 spidat1 = CS_DEFAULT;
-       bool gpio_chipsel = false;
-       int gpio;
 
        dspi = spi_master_get_devdata(spi->master);
        pdata = &dspi->pdata;
 
-       if (spi->cs_gpio >= 0) {
-               /* SPI core parse and update master->cs_gpio */
-               gpio_chipsel = true;
-               gpio = spi->cs_gpio;
-       }
-
        /* program delay transfers if tx_delay is non zero */
        if (spicfg->wdelay)
                spidat1 |= SPIDAT1_WDEL;
@@ -233,11 +227,12 @@ static void davinci_spi_chipselect(struct spi_device *spi, int value)
         * Board specific chip select logic decides the polarity and cs
         * line for the controller
         */
-       if (gpio_chipsel) {
+       if (spi->cs_gpio >= 0) {
                if (value == BITBANG_CS_ACTIVE)
-                       gpio_set_value(gpio, spi->mode & SPI_CS_HIGH);
+                       gpio_set_value(spi->cs_gpio, spi->mode & SPI_CS_HIGH);
                else
-                       gpio_set_value(gpio, !(spi->mode & SPI_CS_HIGH));
+                       gpio_set_value(spi->cs_gpio,
+                               !(spi->mode & SPI_CS_HIGH));
        } else {
                if (value == BITBANG_CS_ACTIVE) {
                        spidat1 |= SPIDAT1_CSHOLD_MASK;
@@ -255,7 +250,7 @@ static void davinci_spi_chipselect(struct spi_device *spi, int value)
  * This function calculates the prescale value that generates a clock rate
  * less than or equal to the specified maximum.
  *
- * Returns: calculated prescale - 1 for easy programming into SPI registers
+ * Returns: calculated prescale value for easy programming into SPI registers
  * or negative error number if valid prescalar cannot be updated.
  */
 static inline int davinci_spi_get_prescale(struct davinci_spi *dspi,
@@ -263,12 +258,13 @@ static inline int davinci_spi_get_prescale(struct davinci_spi *dspi,
 {
        int ret;
 
-       ret = DIV_ROUND_UP(clk_get_rate(dspi->clk), max_speed_hz);
+       /* Subtract 1 to match what will be programmed into SPI register. */
+       ret = DIV_ROUND_UP(clk_get_rate(dspi->clk), max_speed_hz) - 1;
 
-       if (ret < 3 || ret > 256)
+       if (ret < dspi->prescaler_limit || ret > 255)
                return -EINVAL;
 
-       return ret - 1;
+       return ret;
 }
 
 /**
@@ -832,13 +828,40 @@ rx_dma_failed:
 }
 
 #if defined(CONFIG_OF)
+
+/* OF SPI data structure */
+struct davinci_spi_of_data {
+       u8      version;
+       u8      prescaler_limit;
+};
+
+static const struct davinci_spi_of_data dm6441_spi_data = {
+       .version = SPI_VERSION_1,
+       .prescaler_limit = 2,
+};
+
+static const struct davinci_spi_of_data da830_spi_data = {
+       .version = SPI_VERSION_2,
+       .prescaler_limit = 2,
+};
+
+static const struct davinci_spi_of_data keystone_spi_data = {
+       .version = SPI_VERSION_1,
+       .prescaler_limit = 0,
+};
+
 static const struct of_device_id davinci_spi_of_match[] = {
        {
                .compatible = "ti,dm6441-spi",
+               .data = &dm6441_spi_data,
        },
        {
                .compatible = "ti,da830-spi",
-               .data = (void *)SPI_VERSION_2,
+               .data = &da830_spi_data,
+       },
+       {
+               .compatible = "ti,keystone-spi",
+               .data = &keystone_spi_data,
        },
        { },
 };
@@ -857,21 +880,21 @@ static int spi_davinci_get_pdata(struct platform_device *pdev,
                        struct davinci_spi *dspi)
 {
        struct device_node *node = pdev->dev.of_node;
+       struct davinci_spi_of_data *spi_data;
        struct davinci_spi_platform_data *pdata;
        unsigned int num_cs, intr_line = 0;
        const struct of_device_id *match;
 
        pdata = &dspi->pdata;
 
-       pdata->version = SPI_VERSION_1;
        match = of_match_device(davinci_spi_of_match, &pdev->dev);
        if (!match)
                return -ENODEV;
 
-       /* match data has the SPI version number for SPI_VERSION_2 */
-       if (match->data == (void *)SPI_VERSION_2)
-               pdata->version = SPI_VERSION_2;
+       spi_data = (struct davinci_spi_of_data *)match->data;
 
+       pdata->version = spi_data->version;
+       pdata->prescaler_limit = spi_data->prescaler_limit;
        /*
         * default num_cs is 1 and all chipsel are internal to the chip
         * indicated by chip_sel being NULL or cs_gpios being NULL or
@@ -962,11 +985,12 @@ static int davinci_spi_probe(struct platform_device *pdev)
                goto free_master;
        }
 
-       dspi->irq = platform_get_irq(pdev, 0);
-       if (dspi->irq <= 0) {
+       ret = platform_get_irq(pdev, 0);
+       if (ret == 0)
                ret = -EINVAL;
+       if (ret < 0)
                goto free_master;
-       }
+       dspi->irq = ret;
 
        ret = devm_request_threaded_irq(&pdev->dev, dspi->irq, davinci_spi_irq,
                                dummy_thread_fn, 0, dev_name(&pdev->dev), dspi);
@@ -991,7 +1015,7 @@ static int davinci_spi_probe(struct platform_device *pdev)
 
        dspi->bitbang.chipselect = davinci_spi_chipselect;
        dspi->bitbang.setup_transfer = davinci_spi_setup_transfer;
-
+       dspi->prescaler_limit = pdata->prescaler_limit;
        dspi->version = pdata->version;
 
        dspi->bitbang.flags = SPI_NO_CS | SPI_LSB_FIRST | SPI_LOOP;