--- /dev/null
+/*
+ * Copyright (c) 2000-2014 LSI Corporation.
+ *
+ *
+ * Name: mpi2_ioc.h
+ * Title: MPI IOC, Port, Event, FW Download, and FW Upload messages
+ * Creation Date: October 11, 2006
+ *
+ * mpi2_ioc.h Version: 02.00.23
+ *
+ * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
+ * prefix are for use only on MPI v2.5 products, and must not be used
+ * with MPI v2.0 products. Unless otherwise noted, names beginning with
+ * MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products.
+ *
+ * Version History
+ * ---------------
+ *
+ * Date Version Description
+ * -------- -------- ------------------------------------------------------
+ * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
+ * 06-04-07 02.00.01 In IOCFacts Reply structure, renamed MaxDevices to
+ * MaxTargets.
+ * Added TotalImageSize field to FWDownload Request.
+ * Added reserved words to FWUpload Request.
+ * 06-26-07 02.00.02 Added IR Configuration Change List Event.
+ * 08-31-07 02.00.03 Removed SystemReplyQueueDepth field from the IOCInit
+ * request and replaced it with
+ * ReplyDescriptorPostQueueDepth and ReplyFreeQueueDepth.
+ * Replaced the MinReplyQueueDepth field of the IOCFacts
+ * reply with MaxReplyDescriptorPostQueueDepth.
+ * Added MPI2_RDPQ_DEPTH_MIN define to specify the minimum
+ * depth for the Reply Descriptor Post Queue.
+ * Added SASAddress field to Initiator Device Table
+ * Overflow Event data.
+ * 10-31-07 02.00.04 Added ReasonCode MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING
+ * for SAS Initiator Device Status Change Event data.
+ * Modified Reason Code defines for SAS Topology Change
+ * List Event data, including adding a bit for PHY Vacant
+ * status, and adding a mask for the Reason Code.
+ * Added define for
+ * MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING.
+ * Added define for MPI2_EXT_IMAGE_TYPE_MEGARAID.
+ * 12-18-07 02.00.05 Added Boot Status defines for the IOCExceptions field of
+ * the IOCFacts Reply.
+ * Removed MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define.
+ * Moved MPI2_VERSION_UNION to mpi2.h.
+ * Changed MPI2_EVENT_NOTIFICATION_REQUEST to use masks
+ * instead of enables, and added SASBroadcastPrimitiveMasks
+ * field.
+ * Added Log Entry Added Event and related structure.
+ * 02-29-08 02.00.06 Added define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID.
+ * Removed define MPI2_IOCFACTS_PROTOCOL_SMP_TARGET.
+ * Added MaxVolumes and MaxPersistentEntries fields to
+ * IOCFacts reply.
+ * Added ProtocalFlags and IOCCapabilities fields to
+ * MPI2_FW_IMAGE_HEADER.
+ * Removed MPI2_PORTENABLE_FLAGS_ENABLE_SINGLE_PORT.
+ * 03-03-08 02.00.07 Fixed MPI2_FW_IMAGE_HEADER by changing Reserved26 to
+ * a U16 (from a U32).
+ * Removed extra 's' from EventMasks name.
+ * 06-27-08 02.00.08 Fixed an offset in a comment.
+ * 10-02-08 02.00.09 Removed SystemReplyFrameSize from MPI2_IOC_INIT_REQUEST.
+ * Removed CurReplyFrameSize from MPI2_IOC_FACTS_REPLY and
+ * renamed MinReplyFrameSize to ReplyFrameSize.
+ * Added MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX.
+ * Added two new RAIDOperation values for Integrated RAID
+ * Operations Status Event data.
+ * Added four new IR Configuration Change List Event data
+ * ReasonCode values.
+ * Added two new ReasonCode defines for SAS Device Status
+ * Change Event data.
+ * Added three new DiscoveryStatus bits for the SAS
+ * Discovery event data.
+ * Added Multiplexing Status Change bit to the PhyStatus
+ * field of the SAS Topology Change List event data.
+ * Removed define for MPI2_INIT_IMAGE_BOOTFLAGS_XMEMCOPY.
+ * BootFlags are now product-specific.
+ * Added defines for the indivdual signature bytes
+ * for MPI2_INIT_IMAGE_FOOTER.
+ * 01-19-09 02.00.10 Added MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY define.
+ * Added MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR
+ * define.
+ * Added MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE
+ * define.
+ * Removed MPI2_EVENT_SAS_DISC_DS_SATA_INIT_FAILURE define.
+ * 05-06-09 02.00.11 Added MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR define.
+ * Added MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX define.
+ * Added two new reason codes for SAS Device Status Change
+ * Event.
+ * Added new event: SAS PHY Counter.
+ * 07-30-09 02.00.12 Added GPIO Interrupt event define and structure.
+ * Added MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define.
+ * Added new product id family for 2208.
+ * 10-28-09 02.00.13 Added HostMSIxVectors field to MPI2_IOC_INIT_REQUEST.
+ * Added MaxMSIxVectors field to MPI2_IOC_FACTS_REPLY.
+ * Added MinDevHandle field to MPI2_IOC_FACTS_REPLY.
+ * Added MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY.
+ * Added MPI2_EVENT_HOST_BASED_DISCOVERY_PHY define.
+ * Added MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER define.
+ * Added Host Based Discovery Phy Event data.
+ * Added defines for ProductID Product field
+ * (MPI2_FW_HEADER_PID_).
+ * Modified values for SAS ProductID Family
+ * (MPI2_FW_HEADER_PID_FAMILY_).
+ * 02-10-10 02.00.14 Added SAS Quiesce Event structure and defines.
+ * Added PowerManagementControl Request structures and
+ * defines.
+ * 05-12-10 02.00.15 Marked Task Set Full Event as obsolete.
+ * Added MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY define.
+ * 11-10-10 02.00.16 Added MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC.
+ * 02-23-11 02.00.17 Added SAS NOTIFY Primitive event, and added
+ * SASNotifyPrimitiveMasks field to
+ * MPI2_EVENT_NOTIFICATION_REQUEST.
+ * Added Temperature Threshold Event.
+ * Added Host Message Event.
+ * Added Send Host Message request and reply.
+ * 05-25-11 02.00.18 For Extended Image Header, added
+ * MPI2_EXT_IMAGE_TYPE_MIN_PRODUCT_SPECIFIC and
+ * MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC defines.
+ * Deprecated MPI2_EXT_IMAGE_TYPE_MAX define.
+ * 08-24-11 02.00.19 Added PhysicalPort field to
+ * MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE structure.
+ * Marked MPI2_PM_CONTROL_FEATURE_PCIE_LINK as obsolete.
+ * 11-18-11 02.00.20 Incorporating additions for MPI v2.5.
+ * 03-29-12 02.00.21 Added a product specific range to event values.
+ * 07-26-12 02.00.22 Added MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE.
+ * Added ElapsedSeconds field to
+ * MPI2_EVENT_DATA_IR_OPERATION_STATUS.
+ * 08-19-13 02.00.23 For IOCInit, added MPI2_IOCINIT_MSGFLAG_RDPQ_ARRAY_MODE
+ * and MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY.
+ * Added MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE.
+ * Added MPI2_FW_DOWNLOAD_ITYPE_PUBLIC_KEY.
+ * Added Encrypted Hash Extended Image.
+ * --------------------------------------------------------------------------
+ */
+
+#ifndef MPI2_IOC_H
+#define MPI2_IOC_H
+
+/*****************************************************************************
+*
+* IOC Messages
+*
+*****************************************************************************/
+
+/****************************************************************************
+* IOCInit message
+****************************************************************************/
+
+/*IOCInit Request message */
+typedef struct _MPI2_IOC_INIT_REQUEST {
+ U8 WhoInit; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U8 ChainOffset; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved2; /*0x04 */
+ U8 Reserved3; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved4; /*0x0A */
+ U16 MsgVersion; /*0x0C */
+ U16 HeaderVersion; /*0x0E */
+ U32 Reserved5; /*0x10 */
+ U16 Reserved6; /*0x14 */
+ U8 Reserved7; /*0x16 */
+ U8 HostMSIxVectors; /*0x17 */
+ U16 Reserved8; /*0x18 */
+ U16 SystemRequestFrameSize; /*0x1A */
+ U16 ReplyDescriptorPostQueueDepth; /*0x1C */
+ U16 ReplyFreeQueueDepth; /*0x1E */
+ U32 SenseBufferAddressHigh; /*0x20 */
+ U32 SystemReplyAddressHigh; /*0x24 */
+ U64 SystemRequestFrameBaseAddress; /*0x28 */
+ U64 ReplyDescriptorPostQueueAddress; /*0x30 */
+ U64 ReplyFreeQueueAddress; /*0x38 */
+ U64 TimeStamp; /*0x40 */
+} MPI2_IOC_INIT_REQUEST, *PTR_MPI2_IOC_INIT_REQUEST,
+ Mpi2IOCInitRequest_t, *pMpi2IOCInitRequest_t;
+
+/*WhoInit values */
+#define MPI2_WHOINIT_NOT_INITIALIZED (0x00)
+#define MPI2_WHOINIT_SYSTEM_BIOS (0x01)
+#define MPI2_WHOINIT_ROM_BIOS (0x02)
+#define MPI2_WHOINIT_PCI_PEER (0x03)
+#define MPI2_WHOINIT_HOST_DRIVER (0x04)
+#define MPI2_WHOINIT_MANUFACTURER (0x05)
+
+/* MsgFlags */
+#define MPI2_IOCINIT_MSGFLAG_RDPQ_ARRAY_MODE (0x01)
+
+
+/*MsgVersion */
+#define MPI2_IOCINIT_MSGVERSION_MAJOR_MASK (0xFF00)
+#define MPI2_IOCINIT_MSGVERSION_MAJOR_SHIFT (8)
+#define MPI2_IOCINIT_MSGVERSION_MINOR_MASK (0x00FF)
+#define MPI2_IOCINIT_MSGVERSION_MINOR_SHIFT (0)
+
+/*HeaderVersion */
+#define MPI2_IOCINIT_HDRVERSION_UNIT_MASK (0xFF00)
+#define MPI2_IOCINIT_HDRVERSION_UNIT_SHIFT (8)
+#define MPI2_IOCINIT_HDRVERSION_DEV_MASK (0x00FF)
+#define MPI2_IOCINIT_HDRVERSION_DEV_SHIFT (0)
+
+/*minimum depth for a Reply Descriptor Post Queue */
+#define MPI2_RDPQ_DEPTH_MIN (16)
+
+/* Reply Descriptor Post Queue Array Entry */
+typedef struct _MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY {
+ U64 RDPQBaseAddress; /* 0x00 */
+ U32 Reserved1; /* 0x08 */
+ U32 Reserved2; /* 0x0C */
+} MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY,
+*PTR_MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY,
+Mpi2IOCInitRDPQArrayEntry, *pMpi2IOCInitRDPQArrayEntry;
+
+
+/*IOCInit Reply message */
+typedef struct _MPI2_IOC_INIT_REPLY {
+ U8 WhoInit; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U8 MsgLength; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved2; /*0x04 */
+ U8 Reserved3; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved4; /*0x0A */
+ U16 Reserved5; /*0x0C */
+ U16 IOCStatus; /*0x0E */
+ U32 IOCLogInfo; /*0x10 */
+} MPI2_IOC_INIT_REPLY, *PTR_MPI2_IOC_INIT_REPLY,
+ Mpi2IOCInitReply_t, *pMpi2IOCInitReply_t;
+
+/****************************************************************************
+* IOCFacts message
+****************************************************************************/
+
+/*IOCFacts Request message */
+typedef struct _MPI2_IOC_FACTS_REQUEST {
+ U16 Reserved1; /*0x00 */
+ U8 ChainOffset; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved2; /*0x04 */
+ U8 Reserved3; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved4; /*0x0A */
+} MPI2_IOC_FACTS_REQUEST, *PTR_MPI2_IOC_FACTS_REQUEST,
+ Mpi2IOCFactsRequest_t, *pMpi2IOCFactsRequest_t;
+
+/*IOCFacts Reply message */
+typedef struct _MPI2_IOC_FACTS_REPLY {
+ U16 MsgVersion; /*0x00 */
+ U8 MsgLength; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 HeaderVersion; /*0x04 */
+ U8 IOCNumber; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved1; /*0x0A */
+ U16 IOCExceptions; /*0x0C */
+ U16 IOCStatus; /*0x0E */
+ U32 IOCLogInfo; /*0x10 */
+ U8 MaxChainDepth; /*0x14 */
+ U8 WhoInit; /*0x15 */
+ U8 NumberOfPorts; /*0x16 */
+ U8 MaxMSIxVectors; /*0x17 */
+ U16 RequestCredit; /*0x18 */
+ U16 ProductID; /*0x1A */
+ U32 IOCCapabilities; /*0x1C */
+ MPI2_VERSION_UNION FWVersion; /*0x20 */
+ U16 IOCRequestFrameSize; /*0x24 */
+ U16 IOCMaxChainSegmentSize; /*0x26 */
+ U16 MaxInitiators; /*0x28 */
+ U16 MaxTargets; /*0x2A */
+ U16 MaxSasExpanders; /*0x2C */
+ U16 MaxEnclosures; /*0x2E */
+ U16 ProtocolFlags; /*0x30 */
+ U16 HighPriorityCredit; /*0x32 */
+ U16 MaxReplyDescriptorPostQueueDepth; /*0x34 */
+ U8 ReplyFrameSize; /*0x36 */
+ U8 MaxVolumes; /*0x37 */
+ U16 MaxDevHandle; /*0x38 */
+ U16 MaxPersistentEntries; /*0x3A */
+ U16 MinDevHandle; /*0x3C */
+ U16 Reserved4; /*0x3E */
+} MPI2_IOC_FACTS_REPLY, *PTR_MPI2_IOC_FACTS_REPLY,
+ Mpi2IOCFactsReply_t, *pMpi2IOCFactsReply_t;
+
+/*MsgVersion */
+#define MPI2_IOCFACTS_MSGVERSION_MAJOR_MASK (0xFF00)
+#define MPI2_IOCFACTS_MSGVERSION_MAJOR_SHIFT (8)
+#define MPI2_IOCFACTS_MSGVERSION_MINOR_MASK (0x00FF)
+#define MPI2_IOCFACTS_MSGVERSION_MINOR_SHIFT (0)
+
+/*HeaderVersion */
+#define MPI2_IOCFACTS_HDRVERSION_UNIT_MASK (0xFF00)
+#define MPI2_IOCFACTS_HDRVERSION_UNIT_SHIFT (8)
+#define MPI2_IOCFACTS_HDRVERSION_DEV_MASK (0x00FF)
+#define MPI2_IOCFACTS_HDRVERSION_DEV_SHIFT (0)
+
+/*IOCExceptions */
+#define MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE (0x0200)
+#define MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX (0x0100)
+
+#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_MASK (0x00E0)
+#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_GOOD (0x0000)
+#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_BACKUP (0x0020)
+#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_RESTORED (0x0040)
+#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_CORRUPT_BACKUP (0x0060)
+
+#define MPI2_IOCFACTS_EXCEPT_METADATA_UNSUPPORTED (0x0010)
+#define MPI2_IOCFACTS_EXCEPT_MANUFACT_CHECKSUM_FAIL (0x0008)
+#define MPI2_IOCFACTS_EXCEPT_FW_CHECKSUM_FAIL (0x0004)
+#define MPI2_IOCFACTS_EXCEPT_RAID_CONFIG_INVALID (0x0002)
+#define MPI2_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL (0x0001)
+
+/*defines for WhoInit field are after the IOCInit Request */
+
+/*ProductID field uses MPI2_FW_HEADER_PID_ */
+
+/*IOCCapabilities */
+#define MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE (0x00040000)
+#define MPI25_IOCFACTS_CAPABILITY_FAST_PATH_CAPABLE (0x00020000)
+#define MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY (0x00010000)
+#define MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX (0x00008000)
+#define MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR (0x00004000)
+#define MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY (0x00002000)
+#define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID (0x00001000)
+#define MPI2_IOCFACTS_CAPABILITY_TLR (0x00000800)
+#define MPI2_IOCFACTS_CAPABILITY_MULTICAST (0x00000100)
+#define MPI2_IOCFACTS_CAPABILITY_BIDIRECTIONAL_TARGET (0x00000080)
+#define MPI2_IOCFACTS_CAPABILITY_EEDP (0x00000040)
+#define MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER (0x00000020)
+#define MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER (0x00000010)
+#define MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER (0x00000008)
+#define MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING (0x00000004)
+
+/*ProtocolFlags */
+#define MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET (0x0001)
+#define MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR (0x0002)
+
+/****************************************************************************
+* PortFacts message
+****************************************************************************/
+
+/*PortFacts Request message */
+typedef struct _MPI2_PORT_FACTS_REQUEST {
+ U16 Reserved1; /*0x00 */
+ U8 ChainOffset; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved2; /*0x04 */
+ U8 PortNumber; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved3; /*0x0A */
+} MPI2_PORT_FACTS_REQUEST, *PTR_MPI2_PORT_FACTS_REQUEST,
+ Mpi2PortFactsRequest_t, *pMpi2PortFactsRequest_t;
+
+/*PortFacts Reply message */
+typedef struct _MPI2_PORT_FACTS_REPLY {
+ U16 Reserved1; /*0x00 */
+ U8 MsgLength; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved2; /*0x04 */
+ U8 PortNumber; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved3; /*0x0A */
+ U16 Reserved4; /*0x0C */
+ U16 IOCStatus; /*0x0E */
+ U32 IOCLogInfo; /*0x10 */
+ U8 Reserved5; /*0x14 */
+ U8 PortType; /*0x15 */
+ U16 Reserved6; /*0x16 */
+ U16 MaxPostedCmdBuffers; /*0x18 */
+ U16 Reserved7; /*0x1A */
+} MPI2_PORT_FACTS_REPLY, *PTR_MPI2_PORT_FACTS_REPLY,
+ Mpi2PortFactsReply_t, *pMpi2PortFactsReply_t;
+
+/*PortType values */
+#define MPI2_PORTFACTS_PORTTYPE_INACTIVE (0x00)
+#define MPI2_PORTFACTS_PORTTYPE_FC (0x10)
+#define MPI2_PORTFACTS_PORTTYPE_ISCSI (0x20)
+#define MPI2_PORTFACTS_PORTTYPE_SAS_PHYSICAL (0x30)
+#define MPI2_PORTFACTS_PORTTYPE_SAS_VIRTUAL (0x31)
+
+/****************************************************************************
+* PortEnable message
+****************************************************************************/
+
+/*PortEnable Request message */
+typedef struct _MPI2_PORT_ENABLE_REQUEST {
+ U16 Reserved1; /*0x00 */
+ U8 ChainOffset; /*0x02 */
+ U8 Function; /*0x03 */
+ U8 Reserved2; /*0x04 */
+ U8 PortFlags; /*0x05 */
+ U8 Reserved3; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved4; /*0x0A */
+} MPI2_PORT_ENABLE_REQUEST, *PTR_MPI2_PORT_ENABLE_REQUEST,
+ Mpi2PortEnableRequest_t, *pMpi2PortEnableRequest_t;
+
+/*PortEnable Reply message */
+typedef struct _MPI2_PORT_ENABLE_REPLY {
+ U16 Reserved1; /*0x00 */
+ U8 MsgLength; /*0x02 */
+ U8 Function; /*0x03 */
+ U8 Reserved2; /*0x04 */
+ U8 PortFlags; /*0x05 */
+ U8 Reserved3; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved4; /*0x0A */
+ U16 Reserved5; /*0x0C */
+ U16 IOCStatus; /*0x0E */
+ U32 IOCLogInfo; /*0x10 */
+} MPI2_PORT_ENABLE_REPLY, *PTR_MPI2_PORT_ENABLE_REPLY,
+ Mpi2PortEnableReply_t, *pMpi2PortEnableReply_t;
+
+/****************************************************************************
+* EventNotification message
+****************************************************************************/
+
+/*EventNotification Request message */
+#define MPI2_EVENT_NOTIFY_EVENTMASK_WORDS (4)
+
+typedef struct _MPI2_EVENT_NOTIFICATION_REQUEST {
+ U16 Reserved1; /*0x00 */
+ U8 ChainOffset; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved2; /*0x04 */
+ U8 Reserved3; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved4; /*0x0A */
+ U32 Reserved5; /*0x0C */
+ U32 Reserved6; /*0x10 */
+ U32 EventMasks[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS]; /*0x14 */
+ U16 SASBroadcastPrimitiveMasks; /*0x24 */
+ U16 SASNotifyPrimitiveMasks; /*0x26 */
+ U32 Reserved8; /*0x28 */
+} MPI2_EVENT_NOTIFICATION_REQUEST,
+ *PTR_MPI2_EVENT_NOTIFICATION_REQUEST,
+ Mpi2EventNotificationRequest_t,
+ *pMpi2EventNotificationRequest_t;
+
+/*EventNotification Reply message */
+typedef struct _MPI2_EVENT_NOTIFICATION_REPLY {
+ U16 EventDataLength; /*0x00 */
+ U8 MsgLength; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved1; /*0x04 */
+ U8 AckRequired; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved2; /*0x0A */
+ U16 Reserved3; /*0x0C */
+ U16 IOCStatus; /*0x0E */
+ U32 IOCLogInfo; /*0x10 */
+ U16 Event; /*0x14 */
+ U16 Reserved4; /*0x16 */
+ U32 EventContext; /*0x18 */
+ U32 EventData[1]; /*0x1C */
+} MPI2_EVENT_NOTIFICATION_REPLY, *PTR_MPI2_EVENT_NOTIFICATION_REPLY,
+ Mpi2EventNotificationReply_t,
+ *pMpi2EventNotificationReply_t;
+
+/*AckRequired */
+#define MPI2_EVENT_NOTIFICATION_ACK_NOT_REQUIRED (0x00)
+#define MPI2_EVENT_NOTIFICATION_ACK_REQUIRED (0x01)
+
+/*Event */
+#define MPI2_EVENT_LOG_DATA (0x0001)
+#define MPI2_EVENT_STATE_CHANGE (0x0002)
+#define MPI2_EVENT_HARD_RESET_RECEIVED (0x0005)
+#define MPI2_EVENT_EVENT_CHANGE (0x000A)
+#define MPI2_EVENT_TASK_SET_FULL (0x000E) /*obsolete */
+#define MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE (0x000F)
+#define MPI2_EVENT_IR_OPERATION_STATUS (0x0014)
+#define MPI2_EVENT_SAS_DISCOVERY (0x0016)
+#define MPI2_EVENT_SAS_BROADCAST_PRIMITIVE (0x0017)
+#define MPI2_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE (0x0018)
+#define MPI2_EVENT_SAS_INIT_TABLE_OVERFLOW (0x0019)
+#define MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST (0x001C)
+#define MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE (0x001D)
+#define MPI2_EVENT_IR_VOLUME (0x001E)
+#define MPI2_EVENT_IR_PHYSICAL_DISK (0x001F)
+#define MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST (0x0020)
+#define MPI2_EVENT_LOG_ENTRY_ADDED (0x0021)
+#define MPI2_EVENT_SAS_PHY_COUNTER (0x0022)
+#define MPI2_EVENT_GPIO_INTERRUPT (0x0023)
+#define MPI2_EVENT_HOST_BASED_DISCOVERY_PHY (0x0024)
+#define MPI2_EVENT_SAS_QUIESCE (0x0025)
+#define MPI2_EVENT_SAS_NOTIFY_PRIMITIVE (0x0026)
+#define MPI2_EVENT_TEMP_THRESHOLD (0x0027)
+#define MPI2_EVENT_HOST_MESSAGE (0x0028)
+#define MPI2_EVENT_POWER_PERFORMANCE_CHANGE (0x0029)
+#define MPI2_EVENT_MIN_PRODUCT_SPECIFIC (0x006E)
+#define MPI2_EVENT_MAX_PRODUCT_SPECIFIC (0x007F)
+
+/*Log Entry Added Event data */
+
+/*the following structure matches MPI2_LOG_0_ENTRY in mpi2_cnfg.h */
+#define MPI2_EVENT_DATA_LOG_DATA_LENGTH (0x1C)
+
+typedef struct _MPI2_EVENT_DATA_LOG_ENTRY_ADDED {
+ U64 TimeStamp; /*0x00 */
+ U32 Reserved1; /*0x08 */
+ U16 LogSequence; /*0x0C */
+ U16 LogEntryQualifier; /*0x0E */
+ U8 VP_ID; /*0x10 */
+ U8 VF_ID; /*0x11 */
+ U16 Reserved2; /*0x12 */
+ U8 LogData[MPI2_EVENT_DATA_LOG_DATA_LENGTH]; /*0x14 */
+} MPI2_EVENT_DATA_LOG_ENTRY_ADDED,
+ *PTR_MPI2_EVENT_DATA_LOG_ENTRY_ADDED,
+ Mpi2EventDataLogEntryAdded_t,
+ *pMpi2EventDataLogEntryAdded_t;
+
+/*GPIO Interrupt Event data */
+
+typedef struct _MPI2_EVENT_DATA_GPIO_INTERRUPT {
+ U8 GPIONum; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U16 Reserved2; /*0x02 */
+} MPI2_EVENT_DATA_GPIO_INTERRUPT,
+ *PTR_MPI2_EVENT_DATA_GPIO_INTERRUPT,
+ Mpi2EventDataGpioInterrupt_t,
+ *pMpi2EventDataGpioInterrupt_t;
+
+/*Temperature Threshold Event data */
+
+typedef struct _MPI2_EVENT_DATA_TEMPERATURE {
+ U16 Status; /*0x00 */
+ U8 SensorNum; /*0x02 */
+ U8 Reserved1; /*0x03 */
+ U16 CurrentTemperature; /*0x04 */
+ U16 Reserved2; /*0x06 */
+ U32 Reserved3; /*0x08 */
+ U32 Reserved4; /*0x0C */
+} MPI2_EVENT_DATA_TEMPERATURE,
+ *PTR_MPI2_EVENT_DATA_TEMPERATURE,
+ Mpi2EventDataTemperature_t, *pMpi2EventDataTemperature_t;
+
+/*Temperature Threshold Event data Status bits */
+#define MPI2_EVENT_TEMPERATURE3_EXCEEDED (0x0008)
+#define MPI2_EVENT_TEMPERATURE2_EXCEEDED (0x0004)
+#define MPI2_EVENT_TEMPERATURE1_EXCEEDED (0x0002)
+#define MPI2_EVENT_TEMPERATURE0_EXCEEDED (0x0001)
+
+/*Host Message Event data */
+
+typedef struct _MPI2_EVENT_DATA_HOST_MESSAGE {
+ U8 SourceVF_ID; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U16 Reserved2; /*0x02 */
+ U32 Reserved3; /*0x04 */
+ U32 HostData[1]; /*0x08 */
+} MPI2_EVENT_DATA_HOST_MESSAGE, *PTR_MPI2_EVENT_DATA_HOST_MESSAGE,
+ Mpi2EventDataHostMessage_t, *pMpi2EventDataHostMessage_t;
+
+/*Power Performance Change Event */
+
+typedef struct _MPI2_EVENT_DATA_POWER_PERF_CHANGE {
+ U8 CurrentPowerMode; /*0x00 */
+ U8 PreviousPowerMode; /*0x01 */
+ U16 Reserved1; /*0x02 */
+} MPI2_EVENT_DATA_POWER_PERF_CHANGE,
+ *PTR_MPI2_EVENT_DATA_POWER_PERF_CHANGE,
+ Mpi2EventDataPowerPerfChange_t,
+ *pMpi2EventDataPowerPerfChange_t;
+
+/*defines for CurrentPowerMode and PreviousPowerMode fields */
+#define MPI2_EVENT_PM_INIT_MASK (0xC0)
+#define MPI2_EVENT_PM_INIT_UNAVAILABLE (0x00)
+#define MPI2_EVENT_PM_INIT_HOST (0x40)
+#define MPI2_EVENT_PM_INIT_IO_UNIT (0x80)
+#define MPI2_EVENT_PM_INIT_PCIE_DPA (0xC0)
+
+#define MPI2_EVENT_PM_MODE_MASK (0x07)
+#define MPI2_EVENT_PM_MODE_UNAVAILABLE (0x00)
+#define MPI2_EVENT_PM_MODE_UNKNOWN (0x01)
+#define MPI2_EVENT_PM_MODE_FULL_POWER (0x04)
+#define MPI2_EVENT_PM_MODE_REDUCED_POWER (0x05)
+#define MPI2_EVENT_PM_MODE_STANDBY (0x06)
+
+/*Hard Reset Received Event data */
+
+typedef struct _MPI2_EVENT_DATA_HARD_RESET_RECEIVED {
+ U8 Reserved1; /*0x00 */
+ U8 Port; /*0x01 */
+ U16 Reserved2; /*0x02 */
+} MPI2_EVENT_DATA_HARD_RESET_RECEIVED,
+ *PTR_MPI2_EVENT_DATA_HARD_RESET_RECEIVED,
+ Mpi2EventDataHardResetReceived_t,
+ *pMpi2EventDataHardResetReceived_t;
+
+/*Task Set Full Event data */
+/* this event is obsolete */
+
+typedef struct _MPI2_EVENT_DATA_TASK_SET_FULL {
+ U16 DevHandle; /*0x00 */
+ U16 CurrentDepth; /*0x02 */
+} MPI2_EVENT_DATA_TASK_SET_FULL, *PTR_MPI2_EVENT_DATA_TASK_SET_FULL,
+ Mpi2EventDataTaskSetFull_t, *pMpi2EventDataTaskSetFull_t;
+
+/*SAS Device Status Change Event data */
+
+typedef struct _MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE {
+ U16 TaskTag; /*0x00 */
+ U8 ReasonCode; /*0x02 */
+ U8 PhysicalPort; /*0x03 */
+ U8 ASC; /*0x04 */
+ U8 ASCQ; /*0x05 */
+ U16 DevHandle; /*0x06 */
+ U32 Reserved2; /*0x08 */
+ U64 SASAddress; /*0x0C */
+ U8 LUN[8]; /*0x14 */
+} MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE,
+ *PTR_MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE,
+ Mpi2EventDataSasDeviceStatusChange_t,
+ *pMpi2EventDataSasDeviceStatusChange_t;
+
+/*SAS Device Status Change Event data ReasonCode values */
+#define MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA (0x05)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED (0x07)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET (0x08)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL (0x09)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL (0x0A)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL (0x0B)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL (0x0C)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION (0x0D)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET (0x0E)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_TASK_ABORT_INTERNAL (0x0F)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE (0x10)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_EXPANDER_REDUCED_FUNCTIONALITY (0x11)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_EXPANDER_REDUCED_FUNCTIONALITY (0x12)
+
+/*Integrated RAID Operation Status Event data */
+
+typedef struct _MPI2_EVENT_DATA_IR_OPERATION_STATUS {
+ U16 VolDevHandle; /*0x00 */
+ U16 Reserved1; /*0x02 */
+ U8 RAIDOperation; /*0x04 */
+ U8 PercentComplete; /*0x05 */
+ U16 Reserved2; /*0x06 */
+ U32 ElapsedSeconds; /*0x08 */
+} MPI2_EVENT_DATA_IR_OPERATION_STATUS,
+ *PTR_MPI2_EVENT_DATA_IR_OPERATION_STATUS,
+ Mpi2EventDataIrOperationStatus_t,
+ *pMpi2EventDataIrOperationStatus_t;
+
+/*Integrated RAID Operation Status Event data RAIDOperation values */
+#define MPI2_EVENT_IR_RAIDOP_RESYNC (0x00)
+#define MPI2_EVENT_IR_RAIDOP_ONLINE_CAP_EXPANSION (0x01)
+#define MPI2_EVENT_IR_RAIDOP_CONSISTENCY_CHECK (0x02)
+#define MPI2_EVENT_IR_RAIDOP_BACKGROUND_INIT (0x03)
+#define MPI2_EVENT_IR_RAIDOP_MAKE_DATA_CONSISTENT (0x04)
+
+/*Integrated RAID Volume Event data */
+
+typedef struct _MPI2_EVENT_DATA_IR_VOLUME {
+ U16 VolDevHandle; /*0x00 */
+ U8 ReasonCode; /*0x02 */
+ U8 Reserved1; /*0x03 */
+ U32 NewValue; /*0x04 */
+ U32 PreviousValue; /*0x08 */
+} MPI2_EVENT_DATA_IR_VOLUME, *PTR_MPI2_EVENT_DATA_IR_VOLUME,
+ Mpi2EventDataIrVolume_t, *pMpi2EventDataIrVolume_t;
+
+/*Integrated RAID Volume Event data ReasonCode values */
+#define MPI2_EVENT_IR_VOLUME_RC_SETTINGS_CHANGED (0x01)
+#define MPI2_EVENT_IR_VOLUME_RC_STATUS_FLAGS_CHANGED (0x02)
+#define MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED (0x03)
+
+/*Integrated RAID Physical Disk Event data */
+
+typedef struct _MPI2_EVENT_DATA_IR_PHYSICAL_DISK {
+ U16 Reserved1; /*0x00 */
+ U8 ReasonCode; /*0x02 */
+ U8 PhysDiskNum; /*0x03 */
+ U16 PhysDiskDevHandle; /*0x04 */
+ U16 Reserved2; /*0x06 */
+ U16 Slot; /*0x08 */
+ U16 EnclosureHandle; /*0x0A */
+ U32 NewValue; /*0x0C */
+ U32 PreviousValue; /*0x10 */
+} MPI2_EVENT_DATA_IR_PHYSICAL_DISK,
+ *PTR_MPI2_EVENT_DATA_IR_PHYSICAL_DISK,
+ Mpi2EventDataIrPhysicalDisk_t,
+ *pMpi2EventDataIrPhysicalDisk_t;
+
+/*Integrated RAID Physical Disk Event data ReasonCode values */
+#define MPI2_EVENT_IR_PHYSDISK_RC_SETTINGS_CHANGED (0x01)
+#define MPI2_EVENT_IR_PHYSDISK_RC_STATUS_FLAGS_CHANGED (0x02)
+#define MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED (0x03)
+
+/*Integrated RAID Configuration Change List Event data */
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check NumElements at runtime.
+ */
+#ifndef MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT
+#define MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT (1)
+#endif
+
+typedef struct _MPI2_EVENT_IR_CONFIG_ELEMENT {
+ U16 ElementFlags; /*0x00 */
+ U16 VolDevHandle; /*0x02 */
+ U8 ReasonCode; /*0x04 */
+ U8 PhysDiskNum; /*0x05 */
+ U16 PhysDiskDevHandle; /*0x06 */
+} MPI2_EVENT_IR_CONFIG_ELEMENT, *PTR_MPI2_EVENT_IR_CONFIG_ELEMENT,
+ Mpi2EventIrConfigElement_t, *pMpi2EventIrConfigElement_t;
+
+/*IR Configuration Change List Event data ElementFlags values */
+#define MPI2_EVENT_IR_CHANGE_EFLAGS_ELEMENT_TYPE_MASK (0x000F)
+#define MPI2_EVENT_IR_CHANGE_EFLAGS_VOLUME_ELEMENT (0x0000)
+#define MPI2_EVENT_IR_CHANGE_EFLAGS_VOLPHYSDISK_ELEMENT (0x0001)
+#define MPI2_EVENT_IR_CHANGE_EFLAGS_HOTSPARE_ELEMENT (0x0002)
+
+/*IR Configuration Change List Event data ReasonCode values */
+#define MPI2_EVENT_IR_CHANGE_RC_ADDED (0x01)
+#define MPI2_EVENT_IR_CHANGE_RC_REMOVED (0x02)
+#define MPI2_EVENT_IR_CHANGE_RC_NO_CHANGE (0x03)
+#define MPI2_EVENT_IR_CHANGE_RC_HIDE (0x04)
+#define MPI2_EVENT_IR_CHANGE_RC_UNHIDE (0x05)
+#define MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED (0x06)
+#define MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED (0x07)
+#define MPI2_EVENT_IR_CHANGE_RC_PD_CREATED (0x08)
+#define MPI2_EVENT_IR_CHANGE_RC_PD_DELETED (0x09)
+
+typedef struct _MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST {
+ U8 NumElements; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U8 Reserved2; /*0x02 */
+ U8 ConfigNum; /*0x03 */
+ U32 Flags; /*0x04 */
+ MPI2_EVENT_IR_CONFIG_ELEMENT
+ ConfigElement[MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT];/*0x08 */
+} MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST,
+ *PTR_MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST,
+ Mpi2EventDataIrConfigChangeList_t,
+ *pMpi2EventDataIrConfigChangeList_t;
+
+/*IR Configuration Change List Event data Flags values */
+#define MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG (0x00000001)
+
+/*SAS Discovery Event data */
+
+typedef struct _MPI2_EVENT_DATA_SAS_DISCOVERY {
+ U8 Flags; /*0x00 */
+ U8 ReasonCode; /*0x01 */
+ U8 PhysicalPort; /*0x02 */
+ U8 Reserved1; /*0x03 */
+ U32 DiscoveryStatus; /*0x04 */
+} MPI2_EVENT_DATA_SAS_DISCOVERY,
+ *PTR_MPI2_EVENT_DATA_SAS_DISCOVERY,
+ Mpi2EventDataSasDiscovery_t, *pMpi2EventDataSasDiscovery_t;
+
+/*SAS Discovery Event data Flags values */
+#define MPI2_EVENT_SAS_DISC_DEVICE_CHANGE (0x02)
+#define MPI2_EVENT_SAS_DISC_IN_PROGRESS (0x01)
+
+/*SAS Discovery Event data ReasonCode values */
+#define MPI2_EVENT_SAS_DISC_RC_STARTED (0x01)
+#define MPI2_EVENT_SAS_DISC_RC_COMPLETED (0x02)
+
+/*SAS Discovery Event data DiscoveryStatus values */
+#define MPI2_EVENT_SAS_DISC_DS_MAX_ENCLOSURES_EXCEED (0x80000000)
+#define MPI2_EVENT_SAS_DISC_DS_MAX_EXPANDERS_EXCEED (0x40000000)
+#define MPI2_EVENT_SAS_DISC_DS_MAX_DEVICES_EXCEED (0x20000000)
+#define MPI2_EVENT_SAS_DISC_DS_MAX_TOPO_PHYS_EXCEED (0x10000000)
+#define MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR (0x08000000)
+#define MPI2_EVENT_SAS_DISC_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000)
+#define MPI2_EVENT_SAS_DISC_DS_EXP_MULTI_SUBTRACTIVE (0x00004000)
+#define MPI2_EVENT_SAS_DISC_DS_MULTI_PORT_DOMAIN (0x00002000)
+#define MPI2_EVENT_SAS_DISC_DS_TABLE_TO_SUBTRACTIVE_LINK (0x00001000)
+#define MPI2_EVENT_SAS_DISC_DS_UNSUPPORTED_DEVICE (0x00000800)
+#define MPI2_EVENT_SAS_DISC_DS_TABLE_LINK (0x00000400)
+#define MPI2_EVENT_SAS_DISC_DS_SUBTRACTIVE_LINK (0x00000200)
+#define MPI2_EVENT_SAS_DISC_DS_SMP_CRC_ERROR (0x00000100)
+#define MPI2_EVENT_SAS_DISC_DS_SMP_FUNCTION_FAILED (0x00000080)
+#define MPI2_EVENT_SAS_DISC_DS_INDEX_NOT_EXIST (0x00000040)
+#define MPI2_EVENT_SAS_DISC_DS_OUT_ROUTE_ENTRIES (0x00000020)
+#define MPI2_EVENT_SAS_DISC_DS_SMP_TIMEOUT (0x00000010)
+#define MPI2_EVENT_SAS_DISC_DS_MULTIPLE_PORTS (0x00000004)
+#define MPI2_EVENT_SAS_DISC_DS_UNADDRESSABLE_DEVICE (0x00000002)
+#define MPI2_EVENT_SAS_DISC_DS_LOOP_DETECTED (0x00000001)
+
+/*SAS Broadcast Primitive Event data */
+
+typedef struct _MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE {
+ U8 PhyNum; /*0x00 */
+ U8 Port; /*0x01 */
+ U8 PortWidth; /*0x02 */
+ U8 Primitive; /*0x03 */
+} MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE,
+ *PTR_MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE,
+ Mpi2EventDataSasBroadcastPrimitive_t,
+ *pMpi2EventDataSasBroadcastPrimitive_t;
+
+/*defines for the Primitive field */
+#define MPI2_EVENT_PRIMITIVE_CHANGE (0x01)
+#define MPI2_EVENT_PRIMITIVE_SES (0x02)
+#define MPI2_EVENT_PRIMITIVE_EXPANDER (0x03)
+#define MPI2_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT (0x04)
+#define MPI2_EVENT_PRIMITIVE_RESERVED3 (0x05)
+#define MPI2_EVENT_PRIMITIVE_RESERVED4 (0x06)
+#define MPI2_EVENT_PRIMITIVE_CHANGE0_RESERVED (0x07)
+#define MPI2_EVENT_PRIMITIVE_CHANGE1_RESERVED (0x08)
+
+/*SAS Notify Primitive Event data */
+
+typedef struct _MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE {
+ U8 PhyNum; /*0x00 */
+ U8 Port; /*0x01 */
+ U8 Reserved1; /*0x02 */
+ U8 Primitive; /*0x03 */
+} MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE,
+ *PTR_MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE,
+ Mpi2EventDataSasNotifyPrimitive_t,
+ *pMpi2EventDataSasNotifyPrimitive_t;
+
+/*defines for the Primitive field */
+#define MPI2_EVENT_NOTIFY_ENABLE_SPINUP (0x01)
+#define MPI2_EVENT_NOTIFY_POWER_LOSS_EXPECTED (0x02)
+#define MPI2_EVENT_NOTIFY_RESERVED1 (0x03)
+#define MPI2_EVENT_NOTIFY_RESERVED2 (0x04)
+
+/*SAS Initiator Device Status Change Event data */
+
+typedef struct _MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE {
+ U8 ReasonCode; /*0x00 */
+ U8 PhysicalPort; /*0x01 */
+ U16 DevHandle; /*0x02 */
+ U64 SASAddress; /*0x04 */
+} MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE,
+ *PTR_MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE,
+ Mpi2EventDataSasInitDevStatusChange_t,
+ *pMpi2EventDataSasInitDevStatusChange_t;
+
+/*SAS Initiator Device Status Change event ReasonCode values */
+#define MPI2_EVENT_SAS_INIT_RC_ADDED (0x01)
+#define MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING (0x02)
+
+/*SAS Initiator Device Table Overflow Event data */
+
+typedef struct _MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW {
+ U16 MaxInit; /*0x00 */
+ U16 CurrentInit; /*0x02 */
+ U64 SASAddress; /*0x04 */
+} MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW,
+ *PTR_MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW,
+ Mpi2EventDataSasInitTableOverflow_t,
+ *pMpi2EventDataSasInitTableOverflow_t;
+
+/*SAS Topology Change List Event data */
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check NumEntries at runtime.
+ */
+#ifndef MPI2_EVENT_SAS_TOPO_PHY_COUNT
+#define MPI2_EVENT_SAS_TOPO_PHY_COUNT (1)
+#endif
+
+typedef struct _MPI2_EVENT_SAS_TOPO_PHY_ENTRY {
+ U16 AttachedDevHandle; /*0x00 */
+ U8 LinkRate; /*0x02 */
+ U8 PhyStatus; /*0x03 */
+} MPI2_EVENT_SAS_TOPO_PHY_ENTRY, *PTR_MPI2_EVENT_SAS_TOPO_PHY_ENTRY,
+ Mpi2EventSasTopoPhyEntry_t, *pMpi2EventSasTopoPhyEntry_t;
+
+typedef struct _MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST {
+ U16 EnclosureHandle; /*0x00 */
+ U16 ExpanderDevHandle; /*0x02 */
+ U8 NumPhys; /*0x04 */
+ U8 Reserved1; /*0x05 */
+ U16 Reserved2; /*0x06 */
+ U8 NumEntries; /*0x08 */
+ U8 StartPhyNum; /*0x09 */
+ U8 ExpStatus; /*0x0A */
+ U8 PhysicalPort; /*0x0B */
+ MPI2_EVENT_SAS_TOPO_PHY_ENTRY
+ PHY[MPI2_EVENT_SAS_TOPO_PHY_COUNT]; /*0x0C */
+} MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST,
+ *PTR_MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST,
+ Mpi2EventDataSasTopologyChangeList_t,
+ *pMpi2EventDataSasTopologyChangeList_t;
+
+/*values for the ExpStatus field */
+#define MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER (0x00)
+#define MPI2_EVENT_SAS_TOPO_ES_ADDED (0x01)
+#define MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING (0x02)
+#define MPI2_EVENT_SAS_TOPO_ES_RESPONDING (0x03)
+#define MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING (0x04)
+
+/*defines for the LinkRate field */
+#define MPI2_EVENT_SAS_TOPO_LR_CURRENT_MASK (0xF0)
+#define MPI2_EVENT_SAS_TOPO_LR_CURRENT_SHIFT (4)
+#define MPI2_EVENT_SAS_TOPO_LR_PREV_MASK (0x0F)
+#define MPI2_EVENT_SAS_TOPO_LR_PREV_SHIFT (0)
+
+#define MPI2_EVENT_SAS_TOPO_LR_UNKNOWN_LINK_RATE (0x00)
+#define MPI2_EVENT_SAS_TOPO_LR_PHY_DISABLED (0x01)
+#define MPI2_EVENT_SAS_TOPO_LR_NEGOTIATION_FAILED (0x02)
+#define MPI2_EVENT_SAS_TOPO_LR_SATA_OOB_COMPLETE (0x03)
+#define MPI2_EVENT_SAS_TOPO_LR_PORT_SELECTOR (0x04)
+#define MPI2_EVENT_SAS_TOPO_LR_SMP_RESET_IN_PROGRESS (0x05)
+#define MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY (0x06)
+#define MPI2_EVENT_SAS_TOPO_LR_RATE_1_5 (0x08)
+#define MPI2_EVENT_SAS_TOPO_LR_RATE_3_0 (0x09)
+#define MPI2_EVENT_SAS_TOPO_LR_RATE_6_0 (0x0A)
+#define MPI25_EVENT_SAS_TOPO_LR_RATE_12_0 (0x0B)
+
+/*values for the PhyStatus field */
+#define MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT (0x80)
+#define MPI2_EVENT_SAS_TOPO_PS_MULTIPLEX_CHANGE (0x10)
+/*values for the PhyStatus ReasonCode sub-field */
+#define MPI2_EVENT_SAS_TOPO_RC_MASK (0x0F)
+#define MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED (0x01)
+#define MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING (0x02)
+#define MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED (0x03)
+#define MPI2_EVENT_SAS_TOPO_RC_NO_CHANGE (0x04)
+#define MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING (0x05)
+
+/*SAS Enclosure Device Status Change Event data */
+
+typedef struct _MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE {
+ U16 EnclosureHandle; /*0x00 */
+ U8 ReasonCode; /*0x02 */
+ U8 PhysicalPort; /*0x03 */
+ U64 EnclosureLogicalID; /*0x04 */
+ U16 NumSlots; /*0x0C */
+ U16 StartSlot; /*0x0E */
+ U32 PhyBits; /*0x10 */
+} MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE,
+ *PTR_MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE,
+ Mpi2EventDataSasEnclDevStatusChange_t,
+ *pMpi2EventDataSasEnclDevStatusChange_t;
+
+/*SAS Enclosure Device Status Change event ReasonCode values */
+#define MPI2_EVENT_SAS_ENCL_RC_ADDED (0x01)
+#define MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING (0x02)
+
+/*SAS PHY Counter Event data */
+
+typedef struct _MPI2_EVENT_DATA_SAS_PHY_COUNTER {
+ U64 TimeStamp; /*0x00 */
+ U32 Reserved1; /*0x08 */
+ U8 PhyEventCode; /*0x0C */
+ U8 PhyNum; /*0x0D */
+ U16 Reserved2; /*0x0E */
+ U32 PhyEventInfo; /*0x10 */
+ U8 CounterType; /*0x14 */
+ U8 ThresholdWindow; /*0x15 */
+ U8 TimeUnits; /*0x16 */
+ U8 Reserved3; /*0x17 */
+ U32 EventThreshold; /*0x18 */
+ U16 ThresholdFlags; /*0x1C */
+ U16 Reserved4; /*0x1E */
+} MPI2_EVENT_DATA_SAS_PHY_COUNTER,
+ *PTR_MPI2_EVENT_DATA_SAS_PHY_COUNTER,
+ Mpi2EventDataSasPhyCounter_t,
+ *pMpi2EventDataSasPhyCounter_t;
+
+/*use MPI2_SASPHY3_EVENT_CODE_ values from mpi2_cnfg.h
+ *for the PhyEventCode field */
+
+/*use MPI2_SASPHY3_COUNTER_TYPE_ values from mpi2_cnfg.h
+ *for the CounterType field */
+
+/*use MPI2_SASPHY3_TIME_UNITS_ values from mpi2_cnfg.h
+ *for the TimeUnits field */
+
+/*use MPI2_SASPHY3_TFLAGS_ values from mpi2_cnfg.h
+ *for the ThresholdFlags field */
+
+/*SAS Quiesce Event data */
+
+typedef struct _MPI2_EVENT_DATA_SAS_QUIESCE {
+ U8 ReasonCode; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U16 Reserved2; /*0x02 */
+ U32 Reserved3; /*0x04 */
+} MPI2_EVENT_DATA_SAS_QUIESCE,
+ *PTR_MPI2_EVENT_DATA_SAS_QUIESCE,
+ Mpi2EventDataSasQuiesce_t, *pMpi2EventDataSasQuiesce_t;
+
+/*SAS Quiesce Event data ReasonCode values */
+#define MPI2_EVENT_SAS_QUIESCE_RC_STARTED (0x01)
+#define MPI2_EVENT_SAS_QUIESCE_RC_COMPLETED (0x02)
+
+/*Host Based Discovery Phy Event data */
+
+typedef struct _MPI2_EVENT_HBD_PHY_SAS {
+ U8 Flags; /*0x00 */
+ U8 NegotiatedLinkRate; /*0x01 */
+ U8 PhyNum; /*0x02 */
+ U8 PhysicalPort; /*0x03 */
+ U32 Reserved1; /*0x04 */
+ U8 InitialFrame[28]; /*0x08 */
+} MPI2_EVENT_HBD_PHY_SAS, *PTR_MPI2_EVENT_HBD_PHY_SAS,
+ Mpi2EventHbdPhySas_t, *pMpi2EventHbdPhySas_t;
+
+/*values for the Flags field */
+#define MPI2_EVENT_HBD_SAS_FLAGS_FRAME_VALID (0x02)
+#define MPI2_EVENT_HBD_SAS_FLAGS_SATA_FRAME (0x01)
+
+/*use MPI2_SAS_NEG_LINK_RATE_ defines from mpi2_cnfg.h
+ *for the NegotiatedLinkRate field */
+
+typedef union _MPI2_EVENT_HBD_DESCRIPTOR {
+ MPI2_EVENT_HBD_PHY_SAS Sas;
+} MPI2_EVENT_HBD_DESCRIPTOR, *PTR_MPI2_EVENT_HBD_DESCRIPTOR,
+ Mpi2EventHbdDescriptor_t, *pMpi2EventHbdDescriptor_t;
+
+typedef struct _MPI2_EVENT_DATA_HBD_PHY {
+ U8 DescriptorType; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U16 Reserved2; /*0x02 */
+ U32 Reserved3; /*0x04 */
+ MPI2_EVENT_HBD_DESCRIPTOR Descriptor; /*0x08 */
+} MPI2_EVENT_DATA_HBD_PHY, *PTR_MPI2_EVENT_DATA_HBD_PHY,
+ Mpi2EventDataHbdPhy_t,
+ *pMpi2EventDataMpi2EventDataHbdPhy_t;
+
+/*values for the DescriptorType field */
+#define MPI2_EVENT_HBD_DT_SAS (0x01)
+
+/****************************************************************************
+* EventAck message
+****************************************************************************/
+
+/*EventAck Request message */
+typedef struct _MPI2_EVENT_ACK_REQUEST {
+ U16 Reserved1; /*0x00 */
+ U8 ChainOffset; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved2; /*0x04 */
+ U8 Reserved3; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved4; /*0x0A */
+ U16 Event; /*0x0C */
+ U16 Reserved5; /*0x0E */
+ U32 EventContext; /*0x10 */
+} MPI2_EVENT_ACK_REQUEST, *PTR_MPI2_EVENT_ACK_REQUEST,
+ Mpi2EventAckRequest_t, *pMpi2EventAckRequest_t;
+
+/*EventAck Reply message */
+typedef struct _MPI2_EVENT_ACK_REPLY {
+ U16 Reserved1; /*0x00 */
+ U8 MsgLength; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved2; /*0x04 */
+ U8 Reserved3; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved4; /*0x0A */
+ U16 Reserved5; /*0x0C */
+ U16 IOCStatus; /*0x0E */
+ U32 IOCLogInfo; /*0x10 */
+} MPI2_EVENT_ACK_REPLY, *PTR_MPI2_EVENT_ACK_REPLY,
+ Mpi2EventAckReply_t, *pMpi2EventAckReply_t;
+
+/****************************************************************************
+* SendHostMessage message
+****************************************************************************/
+
+/*SendHostMessage Request message */
+typedef struct _MPI2_SEND_HOST_MESSAGE_REQUEST {
+ U16 HostDataLength; /*0x00 */
+ U8 ChainOffset; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved1; /*0x04 */
+ U8 Reserved2; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved3; /*0x0A */
+ U8 Reserved4; /*0x0C */
+ U8 DestVF_ID; /*0x0D */
+ U16 Reserved5; /*0x0E */
+ U32 Reserved6; /*0x10 */
+ U32 Reserved7; /*0x14 */
+ U32 Reserved8; /*0x18 */
+ U32 Reserved9; /*0x1C */
+ U32 Reserved10; /*0x20 */
+ U32 HostData[1]; /*0x24 */
+} MPI2_SEND_HOST_MESSAGE_REQUEST,
+ *PTR_MPI2_SEND_HOST_MESSAGE_REQUEST,
+ Mpi2SendHostMessageRequest_t,
+ *pMpi2SendHostMessageRequest_t;
+
+/*SendHostMessage Reply message */
+typedef struct _MPI2_SEND_HOST_MESSAGE_REPLY {
+ U16 HostDataLength; /*0x00 */
+ U8 MsgLength; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved1; /*0x04 */
+ U8 Reserved2; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved3; /*0x0A */
+ U16 Reserved4; /*0x0C */
+ U16 IOCStatus; /*0x0E */
+ U32 IOCLogInfo; /*0x10 */
+} MPI2_SEND_HOST_MESSAGE_REPLY, *PTR_MPI2_SEND_HOST_MESSAGE_REPLY,
+ Mpi2SendHostMessageReply_t, *pMpi2SendHostMessageReply_t;
+
+/****************************************************************************
+* FWDownload message
+****************************************************************************/
+
+/*MPI v2.0 FWDownload Request message */
+typedef struct _MPI2_FW_DOWNLOAD_REQUEST {
+ U8 ImageType; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U8 ChainOffset; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved2; /*0x04 */
+ U8 Reserved3; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved4; /*0x0A */
+ U32 TotalImageSize; /*0x0C */
+ U32 Reserved5; /*0x10 */
+ MPI2_MPI_SGE_UNION SGL; /*0x14 */
+} MPI2_FW_DOWNLOAD_REQUEST, *PTR_MPI2_FW_DOWNLOAD_REQUEST,
+ Mpi2FWDownloadRequest, *pMpi2FWDownloadRequest;
+
+#define MPI2_FW_DOWNLOAD_MSGFLGS_LAST_SEGMENT (0x01)
+
+#define MPI2_FW_DOWNLOAD_ITYPE_FW (0x01)
+#define MPI2_FW_DOWNLOAD_ITYPE_BIOS (0x02)
+#define MPI2_FW_DOWNLOAD_ITYPE_MANUFACTURING (0x06)
+#define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_1 (0x07)
+#define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_2 (0x08)
+#define MPI2_FW_DOWNLOAD_ITYPE_MEGARAID (0x09)
+#define MPI2_FW_DOWNLOAD_ITYPE_COMPLETE (0x0A)
+#define MPI2_FW_DOWNLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B)
+#define MPI2_FW_DOWNLOAD_ITYPE_PUBLIC_KEY (0x0C)
+#define MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC (0xF0)
+
+/*MPI v2.0 FWDownload TransactionContext Element */
+typedef struct _MPI2_FW_DOWNLOAD_TCSGE {
+ U8 Reserved1; /*0x00 */
+ U8 ContextSize; /*0x01 */
+ U8 DetailsLength; /*0x02 */
+ U8 Flags; /*0x03 */
+ U32 Reserved2; /*0x04 */
+ U32 ImageOffset; /*0x08 */
+ U32 ImageSize; /*0x0C */
+} MPI2_FW_DOWNLOAD_TCSGE, *PTR_MPI2_FW_DOWNLOAD_TCSGE,
+ Mpi2FWDownloadTCSGE_t, *pMpi2FWDownloadTCSGE_t;
+
+/*MPI v2.5 FWDownload Request message */
+typedef struct _MPI25_FW_DOWNLOAD_REQUEST {
+ U8 ImageType; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U8 ChainOffset; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved2; /*0x04 */
+ U8 Reserved3; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved4; /*0x0A */
+ U32 TotalImageSize; /*0x0C */
+ U32 Reserved5; /*0x10 */
+ U32 Reserved6; /*0x14 */
+ U32 ImageOffset; /*0x18 */
+ U32 ImageSize; /*0x1C */
+ MPI25_SGE_IO_UNION SGL; /*0x20 */
+} MPI25_FW_DOWNLOAD_REQUEST, *PTR_MPI25_FW_DOWNLOAD_REQUEST,
+ Mpi25FWDownloadRequest, *pMpi25FWDownloadRequest;
+
+/*FWDownload Reply message */
+typedef struct _MPI2_FW_DOWNLOAD_REPLY {
+ U8 ImageType; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U8 MsgLength; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved2; /*0x04 */
+ U8 Reserved3; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved4; /*0x0A */
+ U16 Reserved5; /*0x0C */
+ U16 IOCStatus; /*0x0E */
+ U32 IOCLogInfo; /*0x10 */
+} MPI2_FW_DOWNLOAD_REPLY, *PTR_MPI2_FW_DOWNLOAD_REPLY,
+ Mpi2FWDownloadReply_t, *pMpi2FWDownloadReply_t;
+
+/****************************************************************************
+* FWUpload message
+****************************************************************************/
+
+/*MPI v2.0 FWUpload Request message */
+typedef struct _MPI2_FW_UPLOAD_REQUEST {
+ U8 ImageType; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U8 ChainOffset; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved2; /*0x04 */
+ U8 Reserved3; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved4; /*0x0A */
+ U32 Reserved5; /*0x0C */
+ U32 Reserved6; /*0x10 */
+ MPI2_MPI_SGE_UNION SGL; /*0x14 */
+} MPI2_FW_UPLOAD_REQUEST, *PTR_MPI2_FW_UPLOAD_REQUEST,
+ Mpi2FWUploadRequest_t, *pMpi2FWUploadRequest_t;
+
+#define MPI2_FW_UPLOAD_ITYPE_FW_CURRENT (0x00)
+#define MPI2_FW_UPLOAD_ITYPE_FW_FLASH (0x01)
+#define MPI2_FW_UPLOAD_ITYPE_BIOS_FLASH (0x02)
+#define MPI2_FW_UPLOAD_ITYPE_FW_BACKUP (0x05)
+#define MPI2_FW_UPLOAD_ITYPE_MANUFACTURING (0x06)
+#define MPI2_FW_UPLOAD_ITYPE_CONFIG_1 (0x07)
+#define MPI2_FW_UPLOAD_ITYPE_CONFIG_2 (0x08)
+#define MPI2_FW_UPLOAD_ITYPE_MEGARAID (0x09)
+#define MPI2_FW_UPLOAD_ITYPE_COMPLETE (0x0A)
+#define MPI2_FW_UPLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B)
+
+/*MPI v2.0 FWUpload TransactionContext Element */
+typedef struct _MPI2_FW_UPLOAD_TCSGE {
+ U8 Reserved1; /*0x00 */
+ U8 ContextSize; /*0x01 */
+ U8 DetailsLength; /*0x02 */
+ U8 Flags; /*0x03 */
+ U32 Reserved2; /*0x04 */
+ U32 ImageOffset; /*0x08 */
+ U32 ImageSize; /*0x0C */
+} MPI2_FW_UPLOAD_TCSGE, *PTR_MPI2_FW_UPLOAD_TCSGE,
+ Mpi2FWUploadTCSGE_t, *pMpi2FWUploadTCSGE_t;
+
+/*MPI v2.5 FWUpload Request message */
+typedef struct _MPI25_FW_UPLOAD_REQUEST {
+ U8 ImageType; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U8 ChainOffset; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved2; /*0x04 */
+ U8 Reserved3; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved4; /*0x0A */
+ U32 Reserved5; /*0x0C */
+ U32 Reserved6; /*0x10 */
+ U32 Reserved7; /*0x14 */
+ U32 ImageOffset; /*0x18 */
+ U32 ImageSize; /*0x1C */
+ MPI25_SGE_IO_UNION SGL; /*0x20 */
+} MPI25_FW_UPLOAD_REQUEST, *PTR_MPI25_FW_UPLOAD_REQUEST,
+ Mpi25FWUploadRequest_t, *pMpi25FWUploadRequest_t;
+
+/*FWUpload Reply message */
+typedef struct _MPI2_FW_UPLOAD_REPLY {
+ U8 ImageType; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U8 MsgLength; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved2; /*0x04 */
+ U8 Reserved3; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved4; /*0x0A */
+ U16 Reserved5; /*0x0C */
+ U16 IOCStatus; /*0x0E */
+ U32 IOCLogInfo; /*0x10 */
+ U32 ActualImageSize; /*0x14 */
+} MPI2_FW_UPLOAD_REPLY, *PTR_MPI2_FW_UPLOAD_REPLY,
+ Mpi2FWUploadReply_t, *pMPi2FWUploadReply_t;
+
+/*FW Image Header */
+typedef struct _MPI2_FW_IMAGE_HEADER {
+ U32 Signature; /*0x00 */
+ U32 Signature0; /*0x04 */
+ U32 Signature1; /*0x08 */
+ U32 Signature2; /*0x0C */
+ MPI2_VERSION_UNION MPIVersion; /*0x10 */
+ MPI2_VERSION_UNION FWVersion; /*0x14 */
+ MPI2_VERSION_UNION NVDATAVersion; /*0x18 */
+ MPI2_VERSION_UNION PackageVersion; /*0x1C */
+ U16 VendorID; /*0x20 */
+ U16 ProductID; /*0x22 */
+ U16 ProtocolFlags; /*0x24 */
+ U16 Reserved26; /*0x26 */
+ U32 IOCCapabilities; /*0x28 */
+ U32 ImageSize; /*0x2C */
+ U32 NextImageHeaderOffset; /*0x30 */
+ U32 Checksum; /*0x34 */
+ U32 Reserved38; /*0x38 */
+ U32 Reserved3C; /*0x3C */
+ U32 Reserved40; /*0x40 */
+ U32 Reserved44; /*0x44 */
+ U32 Reserved48; /*0x48 */
+ U32 Reserved4C; /*0x4C */
+ U32 Reserved50; /*0x50 */
+ U32 Reserved54; /*0x54 */
+ U32 Reserved58; /*0x58 */
+ U32 Reserved5C; /*0x5C */
+ U32 Reserved60; /*0x60 */
+ U32 FirmwareVersionNameWhat; /*0x64 */
+ U8 FirmwareVersionName[32]; /*0x68 */
+ U32 VendorNameWhat; /*0x88 */
+ U8 VendorName[32]; /*0x8C */
+ U32 PackageNameWhat; /*0x88 */
+ U8 PackageName[32]; /*0x8C */
+ U32 ReservedD0; /*0xD0 */
+ U32 ReservedD4; /*0xD4 */
+ U32 ReservedD8; /*0xD8 */
+ U32 ReservedDC; /*0xDC */
+ U32 ReservedE0; /*0xE0 */
+ U32 ReservedE4; /*0xE4 */
+ U32 ReservedE8; /*0xE8 */
+ U32 ReservedEC; /*0xEC */
+ U32 ReservedF0; /*0xF0 */
+ U32 ReservedF4; /*0xF4 */
+ U32 ReservedF8; /*0xF8 */
+ U32 ReservedFC; /*0xFC */
+} MPI2_FW_IMAGE_HEADER, *PTR_MPI2_FW_IMAGE_HEADER,
+ Mpi2FWImageHeader_t, *pMpi2FWImageHeader_t;
+
+/*Signature field */
+#define MPI2_FW_HEADER_SIGNATURE_OFFSET (0x00)
+#define MPI2_FW_HEADER_SIGNATURE_MASK (0xFF000000)
+#define MPI2_FW_HEADER_SIGNATURE (0xEA000000)
+
+/*Signature0 field */
+#define MPI2_FW_HEADER_SIGNATURE0_OFFSET (0x04)
+#define MPI2_FW_HEADER_SIGNATURE0 (0x5AFAA55A)
+
+/*Signature1 field */
+#define MPI2_FW_HEADER_SIGNATURE1_OFFSET (0x08)
+#define MPI2_FW_HEADER_SIGNATURE1 (0xA55AFAA5)
+
+/*Signature2 field */
+#define MPI2_FW_HEADER_SIGNATURE2_OFFSET (0x0C)
+#define MPI2_FW_HEADER_SIGNATURE2 (0x5AA55AFA)
+
+/*defines for using the ProductID field */
+#define MPI2_FW_HEADER_PID_TYPE_MASK (0xF000)
+#define MPI2_FW_HEADER_PID_TYPE_SAS (0x2000)
+
+#define MPI2_FW_HEADER_PID_PROD_MASK (0x0F00)
+#define MPI2_FW_HEADER_PID_PROD_A (0x0000)
+#define MPI2_FW_HEADER_PID_PROD_TARGET_INITIATOR_SCSI (0x0200)
+#define MPI2_FW_HEADER_PID_PROD_IR_SCSI (0x0700)
+
+#define MPI2_FW_HEADER_PID_FAMILY_MASK (0x00FF)
+/*SAS ProductID Family bits */
+#define MPI2_FW_HEADER_PID_FAMILY_2108_SAS (0x0013)
+#define MPI2_FW_HEADER_PID_FAMILY_2208_SAS (0x0014)
+#define MPI25_FW_HEADER_PID_FAMILY_3108_SAS (0x0021)
+
+/*use MPI2_IOCFACTS_PROTOCOL_ defines for ProtocolFlags field */
+
+/*use MPI2_IOCFACTS_CAPABILITY_ defines for IOCCapabilities field */
+
+#define MPI2_FW_HEADER_IMAGESIZE_OFFSET (0x2C)
+#define MPI2_FW_HEADER_NEXTIMAGE_OFFSET (0x30)
+#define MPI2_FW_HEADER_VERNMHWAT_OFFSET (0x64)
+
+#define MPI2_FW_HEADER_WHAT_SIGNATURE (0x29232840)
+
+#define MPI2_FW_HEADER_SIZE (0x100)
+
+/*Extended Image Header */
+typedef struct _MPI2_EXT_IMAGE_HEADER {
+ U8 ImageType; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U16 Reserved2; /*0x02 */
+ U32 Checksum; /*0x04 */
+ U32 ImageSize; /*0x08 */
+ U32 NextImageHeaderOffset; /*0x0C */
+ U32 PackageVersion; /*0x10 */
+ U32 Reserved3; /*0x14 */
+ U32 Reserved4; /*0x18 */
+ U32 Reserved5; /*0x1C */
+ U8 IdentifyString[32]; /*0x20 */
+} MPI2_EXT_IMAGE_HEADER, *PTR_MPI2_EXT_IMAGE_HEADER,
+ Mpi2ExtImageHeader_t, *pMpi2ExtImageHeader_t;
+
+/*useful offsets */
+#define MPI2_EXT_IMAGE_IMAGETYPE_OFFSET (0x00)
+#define MPI2_EXT_IMAGE_IMAGESIZE_OFFSET (0x08)
+#define MPI2_EXT_IMAGE_NEXTIMAGE_OFFSET (0x0C)
+
+#define MPI2_EXT_IMAGE_HEADER_SIZE (0x40)
+
+/*defines for the ImageType field */
+#define MPI2_EXT_IMAGE_TYPE_UNSPECIFIED (0x00)
+#define MPI2_EXT_IMAGE_TYPE_FW (0x01)
+#define MPI2_EXT_IMAGE_TYPE_NVDATA (0x03)
+#define MPI2_EXT_IMAGE_TYPE_BOOTLOADER (0x04)
+#define MPI2_EXT_IMAGE_TYPE_INITIALIZATION (0x05)
+#define MPI2_EXT_IMAGE_TYPE_FLASH_LAYOUT (0x06)
+#define MPI2_EXT_IMAGE_TYPE_SUPPORTED_DEVICES (0x07)
+#define MPI2_EXT_IMAGE_TYPE_MEGARAID (0x08)
+#define MPI2_EXT_IMAGE_TYPE_ENCRYPTED_HASH (0x09)
+#define MPI2_EXT_IMAGE_TYPE_MIN_PRODUCT_SPECIFIC (0x80)
+#define MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC (0xFF)
+
+#define MPI2_EXT_IMAGE_TYPE_MAX (MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC)
+
+/*FLASH Layout Extended Image Data */
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check RegionsPerLayout at runtime.
+ */
+#ifndef MPI2_FLASH_NUMBER_OF_REGIONS
+#define MPI2_FLASH_NUMBER_OF_REGIONS (1)
+#endif
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check NumberOfLayouts at runtime.
+ */
+#ifndef MPI2_FLASH_NUMBER_OF_LAYOUTS
+#define MPI2_FLASH_NUMBER_OF_LAYOUTS (1)
+#endif
+
+typedef struct _MPI2_FLASH_REGION {
+ U8 RegionType; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U16 Reserved2; /*0x02 */
+ U32 RegionOffset; /*0x04 */
+ U32 RegionSize; /*0x08 */
+ U32 Reserved3; /*0x0C */
+} MPI2_FLASH_REGION, *PTR_MPI2_FLASH_REGION,
+ Mpi2FlashRegion_t, *pMpi2FlashRegion_t;
+
+typedef struct _MPI2_FLASH_LAYOUT {
+ U32 FlashSize; /*0x00 */
+ U32 Reserved1; /*0x04 */
+ U32 Reserved2; /*0x08 */
+ U32 Reserved3; /*0x0C */
+ MPI2_FLASH_REGION Region[MPI2_FLASH_NUMBER_OF_REGIONS]; /*0x10 */
+} MPI2_FLASH_LAYOUT, *PTR_MPI2_FLASH_LAYOUT,
+ Mpi2FlashLayout_t, *pMpi2FlashLayout_t;
+
+typedef struct _MPI2_FLASH_LAYOUT_DATA {
+ U8 ImageRevision; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U8 SizeOfRegion; /*0x02 */
+ U8 Reserved2; /*0x03 */
+ U16 NumberOfLayouts; /*0x04 */
+ U16 RegionsPerLayout; /*0x06 */
+ U16 MinimumSectorAlignment; /*0x08 */
+ U16 Reserved3; /*0x0A */
+ U32 Reserved4; /*0x0C */
+ MPI2_FLASH_LAYOUT Layout[MPI2_FLASH_NUMBER_OF_LAYOUTS]; /*0x10 */
+} MPI2_FLASH_LAYOUT_DATA, *PTR_MPI2_FLASH_LAYOUT_DATA,
+ Mpi2FlashLayoutData_t, *pMpi2FlashLayoutData_t;
+
+/*defines for the RegionType field */
+#define MPI2_FLASH_REGION_UNUSED (0x00)
+#define MPI2_FLASH_REGION_FIRMWARE (0x01)
+#define MPI2_FLASH_REGION_BIOS (0x02)
+#define MPI2_FLASH_REGION_NVDATA (0x03)
+#define MPI2_FLASH_REGION_FIRMWARE_BACKUP (0x05)
+#define MPI2_FLASH_REGION_MFG_INFORMATION (0x06)
+#define MPI2_FLASH_REGION_CONFIG_1 (0x07)
+#define MPI2_FLASH_REGION_CONFIG_2 (0x08)
+#define MPI2_FLASH_REGION_MEGARAID (0x09)
+#define MPI2_FLASH_REGION_INIT (0x0A)
+
+/*ImageRevision */
+#define MPI2_FLASH_LAYOUT_IMAGE_REVISION (0x00)
+
+/*Supported Devices Extended Image Data */
+
+/*
+ *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ *one and check NumberOfDevices at runtime.
+ */
+#ifndef MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES
+#define MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES (1)
+#endif
+
+typedef struct _MPI2_SUPPORTED_DEVICE {
+ U16 DeviceID; /*0x00 */
+ U16 VendorID; /*0x02 */
+ U16 DeviceIDMask; /*0x04 */
+ U16 Reserved1; /*0x06 */
+ U8 LowPCIRev; /*0x08 */
+ U8 HighPCIRev; /*0x09 */
+ U16 Reserved2; /*0x0A */
+ U32 Reserved3; /*0x0C */
+} MPI2_SUPPORTED_DEVICE, *PTR_MPI2_SUPPORTED_DEVICE,
+ Mpi2SupportedDevice_t, *pMpi2SupportedDevice_t;
+
+typedef struct _MPI2_SUPPORTED_DEVICES_DATA {
+ U8 ImageRevision; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U8 NumberOfDevices; /*0x02 */
+ U8 Reserved2; /*0x03 */
+ U32 Reserved3; /*0x04 */
+ MPI2_SUPPORTED_DEVICE
+ SupportedDevice[MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES];/*0x08 */
+} MPI2_SUPPORTED_DEVICES_DATA, *PTR_MPI2_SUPPORTED_DEVICES_DATA,
+ Mpi2SupportedDevicesData_t, *pMpi2SupportedDevicesData_t;
+
+/*ImageRevision */
+#define MPI2_SUPPORTED_DEVICES_IMAGE_REVISION (0x00)
+
+/*Init Extended Image Data */
+
+typedef struct _MPI2_INIT_IMAGE_FOOTER {
+ U32 BootFlags; /*0x00 */
+ U32 ImageSize; /*0x04 */
+ U32 Signature0; /*0x08 */
+ U32 Signature1; /*0x0C */
+ U32 Signature2; /*0x10 */
+ U32 ResetVector; /*0x14 */
+} MPI2_INIT_IMAGE_FOOTER, *PTR_MPI2_INIT_IMAGE_FOOTER,
+ Mpi2InitImageFooter_t, *pMpi2InitImageFooter_t;
+
+/*defines for the BootFlags field */
+#define MPI2_INIT_IMAGE_BOOTFLAGS_OFFSET (0x00)
+
+/*defines for the ImageSize field */
+#define MPI2_INIT_IMAGE_IMAGESIZE_OFFSET (0x04)
+
+/*defines for the Signature0 field */
+#define MPI2_INIT_IMAGE_SIGNATURE0_OFFSET (0x08)
+#define MPI2_INIT_IMAGE_SIGNATURE0 (0x5AA55AEA)
+
+/*defines for the Signature1 field */
+#define MPI2_INIT_IMAGE_SIGNATURE1_OFFSET (0x0C)
+#define MPI2_INIT_IMAGE_SIGNATURE1 (0xA55AEAA5)
+
+/*defines for the Signature2 field */
+#define MPI2_INIT_IMAGE_SIGNATURE2_OFFSET (0x10)
+#define MPI2_INIT_IMAGE_SIGNATURE2 (0x5AEAA55A)
+
+/*Signature fields as individual bytes */
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_0 (0xEA)
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_1 (0x5A)
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_2 (0xA5)
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_3 (0x5A)
+
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_4 (0xA5)
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_5 (0xEA)
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_6 (0x5A)
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_7 (0xA5)
+
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_8 (0x5A)
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_9 (0xA5)
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_A (0xEA)
+#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_B (0x5A)
+
+/*defines for the ResetVector field */
+#define MPI2_INIT_IMAGE_RESETVECTOR_OFFSET (0x14)
+
+
+/* Encrypted Hash Extended Image Data */
+
+typedef struct _MPI25_ENCRYPTED_HASH_ENTRY {
+ U8 HashImageType; /* 0x00 */
+ U8 HashAlgorithm; /* 0x01 */
+ U8 EncryptionAlgorithm; /* 0x02 */
+ U8 Reserved1; /* 0x03 */
+ U32 Reserved2; /* 0x04 */
+ U32 EncryptedHash[1]; /* 0x08 */ /* variable length */
+} MPI25_ENCRYPTED_HASH_ENTRY, *PTR_MPI25_ENCRYPTED_HASH_ENTRY,
+Mpi25EncryptedHashEntry_t, *pMpi25EncryptedHashEntry_t;
+
+/* values for HashImageType */
+#define MPI25_HASH_IMAGE_TYPE_UNUSED (0x00)
+#define MPI25_HASH_IMAGE_TYPE_FIRMWARE (0x01)
+
+/* values for HashAlgorithm */
+#define MPI25_HASH_ALGORITHM_UNUSED (0x00)
+#define MPI25_HASH_ALGORITHM_SHA256 (0x01)
+
+/* values for EncryptionAlgorithm */
+#define MPI25_ENCRYPTION_ALG_UNUSED (0x00)
+#define MPI25_ENCRYPTION_ALG_RSA256 (0x01)
+
+typedef struct _MPI25_ENCRYPTED_HASH_DATA {
+ U8 ImageVersion; /* 0x00 */
+ U8 NumHash; /* 0x01 */
+ U16 Reserved1; /* 0x02 */
+ U32 Reserved2; /* 0x04 */
+ MPI25_ENCRYPTED_HASH_ENTRY EncryptedHashEntry[1]; /* 0x08 */
+} MPI25_ENCRYPTED_HASH_DATA, *PTR_MPI25_ENCRYPTED_HASH_DATA,
+Mpi25EncryptedHashData_t, *pMpi25EncryptedHashData_t;
+
+
+
+/****************************************************************************
+* PowerManagementControl message
+****************************************************************************/
+
+/*PowerManagementControl Request message */
+typedef struct _MPI2_PWR_MGMT_CONTROL_REQUEST {
+ U8 Feature; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U8 ChainOffset; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved2; /*0x04 */
+ U8 Reserved3; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved4; /*0x0A */
+ U8 Parameter1; /*0x0C */
+ U8 Parameter2; /*0x0D */
+ U8 Parameter3; /*0x0E */
+ U8 Parameter4; /*0x0F */
+ U32 Reserved5; /*0x10 */
+ U32 Reserved6; /*0x14 */
+} MPI2_PWR_MGMT_CONTROL_REQUEST, *PTR_MPI2_PWR_MGMT_CONTROL_REQUEST,
+ Mpi2PwrMgmtControlRequest_t, *pMpi2PwrMgmtControlRequest_t;
+
+/*defines for the Feature field */
+#define MPI2_PM_CONTROL_FEATURE_DA_PHY_POWER_COND (0x01)
+#define MPI2_PM_CONTROL_FEATURE_PORT_WIDTH_MODULATION (0x02)
+#define MPI2_PM_CONTROL_FEATURE_PCIE_LINK (0x03) /*obsolete */
+#define MPI2_PM_CONTROL_FEATURE_IOC_SPEED (0x04)
+#define MPI2_PM_CONTROL_FEATURE_GLOBAL_PWR_MGMT_MODE (0x05)
+#define MPI2_PM_CONTROL_FEATURE_MIN_PRODUCT_SPECIFIC (0x80)
+#define MPI2_PM_CONTROL_FEATURE_MAX_PRODUCT_SPECIFIC (0xFF)
+
+/*parameter usage for the MPI2_PM_CONTROL_FEATURE_DA_PHY_POWER_COND Feature */
+/*Parameter1 contains a PHY number */
+/*Parameter2 indicates power condition action using these defines */
+#define MPI2_PM_CONTROL_PARAM2_PARTIAL (0x01)
+#define MPI2_PM_CONTROL_PARAM2_SLUMBER (0x02)
+#define MPI2_PM_CONTROL_PARAM2_EXIT_PWR_MGMT (0x03)
+/*Parameter3 and Parameter4 are reserved */
+
+/*parameter usage for the MPI2_PM_CONTROL_FEATURE_PORT_WIDTH_MODULATION
+ * Feature */
+/*Parameter1 contains SAS port width modulation group number */
+/*Parameter2 indicates IOC action using these defines */
+#define MPI2_PM_CONTROL_PARAM2_REQUEST_OWNERSHIP (0x01)
+#define MPI2_PM_CONTROL_PARAM2_CHANGE_MODULATION (0x02)
+#define MPI2_PM_CONTROL_PARAM2_RELINQUISH_OWNERSHIP (0x03)
+/*Parameter3 indicates desired modulation level using these defines */
+#define MPI2_PM_CONTROL_PARAM3_25_PERCENT (0x00)
+#define MPI2_PM_CONTROL_PARAM3_50_PERCENT (0x01)
+#define MPI2_PM_CONTROL_PARAM3_75_PERCENT (0x02)
+#define MPI2_PM_CONTROL_PARAM3_100_PERCENT (0x03)
+/*Parameter4 is reserved */
+
+/*this next set (_PCIE_LINK) is obsolete */
+/*parameter usage for the MPI2_PM_CONTROL_FEATURE_PCIE_LINK Feature */
+/*Parameter1 indicates desired PCIe link speed using these defines */
+#define MPI2_PM_CONTROL_PARAM1_PCIE_2_5_GBPS (0x00) /*obsolete */
+#define MPI2_PM_CONTROL_PARAM1_PCIE_5_0_GBPS (0x01) /*obsolete */
+#define MPI2_PM_CONTROL_PARAM1_PCIE_8_0_GBPS (0x02) /*obsolete */
+/*Parameter2 indicates desired PCIe link width using these defines */
+#define MPI2_PM_CONTROL_PARAM2_WIDTH_X1 (0x01) /*obsolete */
+#define MPI2_PM_CONTROL_PARAM2_WIDTH_X2 (0x02) /*obsolete */
+#define MPI2_PM_CONTROL_PARAM2_WIDTH_X4 (0x04) /*obsolete */
+#define MPI2_PM_CONTROL_PARAM2_WIDTH_X8 (0x08) /*obsolete */
+/*Parameter3 and Parameter4 are reserved */
+
+/*parameter usage for the MPI2_PM_CONTROL_FEATURE_IOC_SPEED Feature */
+/*Parameter1 indicates desired IOC hardware clock speed using these defines */
+#define MPI2_PM_CONTROL_PARAM1_FULL_IOC_SPEED (0x01)
+#define MPI2_PM_CONTROL_PARAM1_HALF_IOC_SPEED (0x02)
+#define MPI2_PM_CONTROL_PARAM1_QUARTER_IOC_SPEED (0x04)
+#define MPI2_PM_CONTROL_PARAM1_EIGHTH_IOC_SPEED (0x08)
+/*Parameter2, Parameter3, and Parameter4 are reserved */
+
+/*parameter usage for the MPI2_PM_CONTROL_FEATURE_GLOBAL_PWR_MGMT_MODE Feature*/
+/*Parameter1 indicates host action regarding global power management mode */
+#define MPI2_PM_CONTROL_PARAM1_TAKE_CONTROL (0x01)
+#define MPI2_PM_CONTROL_PARAM1_CHANGE_GLOBAL_MODE (0x02)
+#define MPI2_PM_CONTROL_PARAM1_RELEASE_CONTROL (0x03)
+/*Parameter2 indicates the requested global power management mode */
+#define MPI2_PM_CONTROL_PARAM2_FULL_PWR_PERF (0x01)
+#define MPI2_PM_CONTROL_PARAM2_REDUCED_PWR_PERF (0x08)
+#define MPI2_PM_CONTROL_PARAM2_STANDBY (0x40)
+/*Parameter3 and Parameter4 are reserved */
+
+/*PowerManagementControl Reply message */
+typedef struct _MPI2_PWR_MGMT_CONTROL_REPLY {
+ U8 Feature; /*0x00 */
+ U8 Reserved1; /*0x01 */
+ U8 MsgLength; /*0x02 */
+ U8 Function; /*0x03 */
+ U16 Reserved2; /*0x04 */
+ U8 Reserved3; /*0x06 */
+ U8 MsgFlags; /*0x07 */
+ U8 VP_ID; /*0x08 */
+ U8 VF_ID; /*0x09 */
+ U16 Reserved4; /*0x0A */
+ U16 Reserved5; /*0x0C */
+ U16 IOCStatus; /*0x0E */
+ U32 IOCLogInfo; /*0x10 */
+} MPI2_PWR_MGMT_CONTROL_REPLY, *PTR_MPI2_PWR_MGMT_CONTROL_REPLY,
+ Mpi2PwrMgmtControlReply_t, *pMpi2PwrMgmtControlReply_t;
+
+#endif
Code Review / kvmfornfv.git / blobdiff