+++ /dev/null
-/*
- * This is the Fusion MPT base driver providing common API layer interface
- * for access to MPT (Message Passing Technology) firmware.
- *
- * This code is based on drivers/scsi/mpt2sas/mpt2_base.h
- * Copyright (C) 2007-2014 LSI Corporation
- * Copyright (C) 20013-2014 Avago Technologies
- * (mailto: MPT-FusionLinux.pdl@avagotech.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * NO WARRANTY
- * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
- * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
- * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
- * solely responsible for determining the appropriateness of using and
- * distributing the Program and assumes all risks associated with its
- * exercise of rights under this Agreement, including but not limited to
- * the risks and costs of program errors, damage to or loss of data,
- * programs or equipment, and unavailability or interruption of operations.
-
- * DISCLAIMER OF LIABILITY
- * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
- * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
-
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
- * USA.
- */
-
-#ifndef MPT2SAS_BASE_H_INCLUDED
-#define MPT2SAS_BASE_H_INCLUDED
-
-#include "mpi/mpi2_type.h"
-#include "mpi/mpi2.h"
-#include "mpi/mpi2_ioc.h"
-#include "mpi/mpi2_cnfg.h"
-#include "mpi/mpi2_init.h"
-#include "mpi/mpi2_raid.h"
-#include "mpi/mpi2_tool.h"
-#include "mpi/mpi2_sas.h"
-
-#include <scsi/scsi.h>
-#include <scsi/scsi_cmnd.h>
-#include <scsi/scsi_device.h>
-#include <scsi/scsi_host.h>
-#include <scsi/scsi_tcq.h>
-#include <scsi/scsi_transport_sas.h>
-#include <scsi/scsi_dbg.h>
-#include <scsi/scsi_eh.h>
-
-#include "mpt2sas_debug.h"
-
-/* driver versioning info */
-#define MPT2SAS_DRIVER_NAME "mpt2sas"
-#define MPT2SAS_AUTHOR "Avago Technologies <MPT-FusionLinux.pdl@avagotech.com>"
-#define MPT2SAS_DESCRIPTION "LSI MPT Fusion SAS 2.0 Device Driver"
-#define MPT2SAS_DRIVER_VERSION "20.100.00.00"
-#define MPT2SAS_MAJOR_VERSION 20
-#define MPT2SAS_MINOR_VERSION 100
-#define MPT2SAS_BUILD_VERSION 00
-#define MPT2SAS_RELEASE_VERSION 00
-
-/*
- * Set MPT2SAS_SG_DEPTH value based on user input.
- */
-#ifdef CONFIG_SCSI_MPT2SAS_MAX_SGE
-#if CONFIG_SCSI_MPT2SAS_MAX_SGE < 16
-#define MPT2SAS_SG_DEPTH 16
-#elif CONFIG_SCSI_MPT2SAS_MAX_SGE > 128
-#define MPT2SAS_SG_DEPTH 128
-#else
-#define MPT2SAS_SG_DEPTH CONFIG_SCSI_MPT2SAS_MAX_SGE
-#endif
-#else
-#define MPT2SAS_SG_DEPTH 128 /* MAX_HW_SEGMENTS */
-#endif
-
-
-/*
- * Generic Defines
- */
-#define MPT2SAS_SATA_QUEUE_DEPTH 32
-#define MPT2SAS_SAS_QUEUE_DEPTH 254
-#define MPT2SAS_RAID_QUEUE_DEPTH 128
-
-#define MPT_NAME_LENGTH 32 /* generic length of strings */
-#define MPT_STRING_LENGTH 64
-
-#define MPT_MAX_CALLBACKS 16
-
-
-#define CAN_SLEEP 1
-#define NO_SLEEP 0
-
-#define INTERNAL_CMDS_COUNT 10 /* reserved cmds */
-
-#define MPI2_HIM_MASK 0xFFFFFFFF /* mask every bit*/
-
-#define MPT2SAS_INVALID_DEVICE_HANDLE 0xFFFF
-
-
-/*
- * reset phases
- */
-#define MPT2_IOC_PRE_RESET 1 /* prior to host reset */
-#define MPT2_IOC_AFTER_RESET 2 /* just after host reset */
-#define MPT2_IOC_DONE_RESET 3 /* links re-initialized */
-
-/*
- * logging format
- */
-#define MPT2SAS_FMT "%s: "
-#define MPT2SAS_INFO_FMT KERN_INFO MPT2SAS_FMT
-#define MPT2SAS_NOTE_FMT KERN_NOTICE MPT2SAS_FMT
-#define MPT2SAS_WARN_FMT KERN_WARNING MPT2SAS_FMT
-#define MPT2SAS_ERR_FMT KERN_ERR MPT2SAS_FMT
-
-/*
- * Dell HBA branding
- */
-#define MPT2SAS_DELL_BRANDING_SIZE 32
-
-#define MPT2SAS_DELL_6GBPS_SAS_HBA_BRANDING "Dell 6Gbps SAS HBA"
-#define MPT2SAS_DELL_PERC_H200_ADAPTER_BRANDING "Dell PERC H200 Adapter"
-#define MPT2SAS_DELL_PERC_H200_INTEGRATED_BRANDING "Dell PERC H200 Integrated"
-#define MPT2SAS_DELL_PERC_H200_MODULAR_BRANDING "Dell PERC H200 Modular"
-#define MPT2SAS_DELL_PERC_H200_EMBEDDED_BRANDING "Dell PERC H200 Embedded"
-#define MPT2SAS_DELL_PERC_H200_BRANDING "Dell PERC H200"
-#define MPT2SAS_DELL_6GBPS_SAS_BRANDING "Dell 6Gbps SAS"
-
-/*
- * Dell HBA SSDIDs
- */
-#define MPT2SAS_DELL_6GBPS_SAS_HBA_SSDID 0x1F1C
-#define MPT2SAS_DELL_PERC_H200_ADAPTER_SSDID 0x1F1D
-#define MPT2SAS_DELL_PERC_H200_INTEGRATED_SSDID 0x1F1E
-#define MPT2SAS_DELL_PERC_H200_MODULAR_SSDID 0x1F1F
-#define MPT2SAS_DELL_PERC_H200_EMBEDDED_SSDID 0x1F20
-#define MPT2SAS_DELL_PERC_H200_SSDID 0x1F21
-#define MPT2SAS_DELL_6GBPS_SAS_SSDID 0x1F22
-
-/*
- * Intel HBA branding
- */
-#define MPT2SAS_INTEL_RMS25JB080_BRANDING \
- "Intel(R) Integrated RAID Module RMS25JB080"
-#define MPT2SAS_INTEL_RMS25JB040_BRANDING \
- "Intel(R) Integrated RAID Module RMS25JB040"
-#define MPT2SAS_INTEL_RMS25KB080_BRANDING \
- "Intel(R) Integrated RAID Module RMS25KB080"
-#define MPT2SAS_INTEL_RMS25KB040_BRANDING \
- "Intel(R) Integrated RAID Module RMS25KB040"
-#define MPT2SAS_INTEL_RMS25LB040_BRANDING \
- "Intel(R) Integrated RAID Module RMS25LB040"
-#define MPT2SAS_INTEL_RMS25LB080_BRANDING \
- "Intel(R) Integrated RAID Module RMS25LB080"
-#define MPT2SAS_INTEL_RMS2LL080_BRANDING \
- "Intel Integrated RAID Module RMS2LL080"
-#define MPT2SAS_INTEL_RMS2LL040_BRANDING \
- "Intel Integrated RAID Module RMS2LL040"
-#define MPT2SAS_INTEL_RS25GB008_BRANDING \
- "Intel(R) RAID Controller RS25GB008"
-#define MPT2SAS_INTEL_SSD910_BRANDING \
- "Intel(R) SSD 910 Series"
-/*
- * Intel HBA SSDIDs
- */
-#define MPT2SAS_INTEL_RMS25JB080_SSDID 0x3516
-#define MPT2SAS_INTEL_RMS25JB040_SSDID 0x3517
-#define MPT2SAS_INTEL_RMS25KB080_SSDID 0x3518
-#define MPT2SAS_INTEL_RMS25KB040_SSDID 0x3519
-#define MPT2SAS_INTEL_RMS25LB040_SSDID 0x351A
-#define MPT2SAS_INTEL_RMS25LB080_SSDID 0x351B
-#define MPT2SAS_INTEL_RMS2LL080_SSDID 0x350E
-#define MPT2SAS_INTEL_RMS2LL040_SSDID 0x350F
-#define MPT2SAS_INTEL_RS25GB008_SSDID 0x3000
-#define MPT2SAS_INTEL_SSD910_SSDID 0x3700
-
-/*
- * HP HBA branding
- */
-#define MPT2SAS_HP_3PAR_SSVID 0x1590
-#define MPT2SAS_HP_2_4_INTERNAL_BRANDING "HP H220 Host Bus Adapter"
-#define MPT2SAS_HP_2_4_EXTERNAL_BRANDING "HP H221 Host Bus Adapter"
-#define MPT2SAS_HP_1_4_INTERNAL_1_4_EXTERNAL_BRANDING "HP H222 Host Bus Adapter"
-#define MPT2SAS_HP_EMBEDDED_2_4_INTERNAL_BRANDING "HP H220i Host Bus Adapter"
-#define MPT2SAS_HP_DAUGHTER_2_4_INTERNAL_BRANDING "HP H210i Host Bus Adapter"
-
-/*
- * HO HBA SSDIDs
- */
-#define MPT2SAS_HP_2_4_INTERNAL_SSDID 0x0041
-#define MPT2SAS_HP_2_4_EXTERNAL_SSDID 0x0042
-#define MPT2SAS_HP_1_4_INTERNAL_1_4_EXTERNAL_SSDID 0x0043
-#define MPT2SAS_HP_EMBEDDED_2_4_INTERNAL_SSDID 0x0044
-#define MPT2SAS_HP_DAUGHTER_2_4_INTERNAL_SSDID 0x0046
-
-/*
- * WarpDrive Specific Log codes
- */
-
-#define MPT2_WARPDRIVE_LOGENTRY (0x8002)
-#define MPT2_WARPDRIVE_LC_SSDT (0x41)
-#define MPT2_WARPDRIVE_LC_SSDLW (0x43)
-#define MPT2_WARPDRIVE_LC_SSDLF (0x44)
-#define MPT2_WARPDRIVE_LC_BRMF (0x4D)
-
-/*
- * per target private data
- */
-#define MPT_TARGET_FLAGS_RAID_COMPONENT 0x01
-#define MPT_TARGET_FLAGS_VOLUME 0x02
-#define MPT_TARGET_FLAGS_DELETED 0x04
-
-/**
- * struct MPT2SAS_TARGET - starget private hostdata
- * @starget: starget object
- * @sas_address: target sas address
- * @raid_device: raid_device pointer to access volume data
- * @handle: device handle
- * @num_luns: number luns
- * @flags: MPT_TARGET_FLAGS_XXX flags
- * @deleted: target flaged for deletion
- * @tm_busy: target is busy with TM request.
- */
-struct MPT2SAS_TARGET {
- struct scsi_target *starget;
- u64 sas_address;
- struct _raid_device *raid_device;
- u16 handle;
- int num_luns;
- u32 flags;
- u8 deleted;
- u8 tm_busy;
-};
-
-
-/*
- * per device private data
- */
-#define MPT_DEVICE_FLAGS_INIT 0x01
-#define MPT_DEVICE_TLR_ON 0x02
-
-/**
- * struct MPT2SAS_DEVICE - sdev private hostdata
- * @sas_target: starget private hostdata
- * @lun: lun number
- * @flags: MPT_DEVICE_XXX flags
- * @configured_lun: lun is configured
- * @block: device is in SDEV_BLOCK state
- * @tlr_snoop_check: flag used in determining whether to disable TLR
- */
-
-/* OEM Identifiers */
-#define MFG10_OEM_ID_INVALID (0x00000000)
-#define MFG10_OEM_ID_DELL (0x00000001)
-#define MFG10_OEM_ID_FSC (0x00000002)
-#define MFG10_OEM_ID_SUN (0x00000003)
-#define MFG10_OEM_ID_IBM (0x00000004)
-
-/* GENERIC Flags 0*/
-#define MFG10_GF0_OCE_DISABLED (0x00000001)
-#define MFG10_GF0_R1E_DRIVE_COUNT (0x00000002)
-#define MFG10_GF0_R10_DISPLAY (0x00000004)
-#define MFG10_GF0_SSD_DATA_SCRUB_DISABLE (0x00000008)
-#define MFG10_GF0_SINGLE_DRIVE_R0 (0x00000010)
-
-/* OEM Specific Flags will come from OEM specific header files */
-typedef struct _MPI2_CONFIG_PAGE_MAN_10 {
- MPI2_CONFIG_PAGE_HEADER Header; /* 00h */
- U8 OEMIdentifier; /* 04h */
- U8 Reserved1; /* 05h */
- U16 Reserved2; /* 08h */
- U32 Reserved3; /* 0Ch */
- U32 GenericFlags0; /* 10h */
- U32 GenericFlags1; /* 14h */
- U32 Reserved4; /* 18h */
- U32 OEMSpecificFlags0; /* 1Ch */
- U32 OEMSpecificFlags1; /* 20h */
- U32 Reserved5[18]; /* 24h-60h*/
-} MPI2_CONFIG_PAGE_MAN_10,
- MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_10,
- Mpi2ManufacturingPage10_t, MPI2_POINTER pMpi2ManufacturingPage10_t;
-
-#define MFG_PAGE10_HIDE_SSDS_MASK (0x00000003)
-#define MFG_PAGE10_HIDE_ALL_DISKS (0x00)
-#define MFG_PAGE10_EXPOSE_ALL_DISKS (0x01)
-#define MFG_PAGE10_HIDE_IF_VOL_PRESENT (0x02)
-
-
-struct MPT2SAS_DEVICE {
- struct MPT2SAS_TARGET *sas_target;
- unsigned int lun;
- u32 flags;
- u8 configured_lun;
- u8 block;
- u8 tlr_snoop_check;
-};
-
-#define MPT2_CMD_NOT_USED 0x8000 /* free */
-#define MPT2_CMD_COMPLETE 0x0001 /* completed */
-#define MPT2_CMD_PENDING 0x0002 /* pending */
-#define MPT2_CMD_REPLY_VALID 0x0004 /* reply is valid */
-#define MPT2_CMD_RESET 0x0008 /* host reset dropped the command */
-
-/**
- * struct _internal_cmd - internal commands struct
- * @mutex: mutex
- * @done: completion
- * @reply: reply message pointer
- * @sense: sense data
- * @status: MPT2_CMD_XXX status
- * @smid: system message id
- */
-struct _internal_cmd {
- struct mutex mutex;
- struct completion done;
- void *reply;
- void *sense;
- u16 status;
- u16 smid;
-};
-
-
-/**
- * struct _sas_device - attached device information
- * @list: sas device list
- * @starget: starget object
- * @sas_address: device sas address
- * @device_name: retrieved from the SAS IDENTIFY frame.
- * @handle: device handle
- * @sas_address_parent: sas address of parent expander or sas host
- * @enclosure_handle: enclosure handle
- * @enclosure_logical_id: enclosure logical identifier
- * @volume_handle: volume handle (valid when hidden raid member)
- * @volume_wwid: volume unique identifier
- * @device_info: bitfield provides detailed info about the device
- * @id: target id
- * @channel: target channel
- * @slot: number number
- * @phy: phy identifier provided in sas device page 0
- * @responding: used in _scsih_sas_device_mark_responding
- * @pfa_led_on: flag for PFA LED status
- */
-struct _sas_device {
- struct list_head list;
- struct scsi_target *starget;
- u64 sas_address;
- u64 device_name;
- u16 handle;
- u64 sas_address_parent;
- u16 enclosure_handle;
- u64 enclosure_logical_id;
- u16 volume_handle;
- u64 volume_wwid;
- u32 device_info;
- int id;
- int channel;
- u16 slot;
- u8 phy;
- u8 responding;
- u8 pfa_led_on;
-};
-
-/**
- * struct _raid_device - raid volume link list
- * @list: sas device list
- * @starget: starget object
- * @sdev: scsi device struct (volumes are single lun)
- * @wwid: unique identifier for the volume
- * @handle: device handle
- * @block_size: Block size of the volume
- * @id: target id
- * @channel: target channel
- * @volume_type: the raid level
- * @device_info: bitfield provides detailed info about the hidden components
- * @num_pds: number of hidden raid components
- * @responding: used in _scsih_raid_device_mark_responding
- * @percent_complete: resync percent complete
- * @direct_io_enabled: Whether direct io to PDs are allowed or not
- * @stripe_exponent: X where 2powX is the stripe sz in blocks
- * @block_exponent: X where 2powX is the block sz in bytes
- * @max_lba: Maximum number of LBA in the volume
- * @stripe_sz: Stripe Size of the volume
- * @device_info: Device info of the volume member disk
- * @pd_handle: Array of handles of the physical drives for direct I/O in le16
- */
-#define MPT_MAX_WARPDRIVE_PDS 8
-struct _raid_device {
- struct list_head list;
- struct scsi_target *starget;
- struct scsi_device *sdev;
- u64 wwid;
- u16 handle;
- u16 block_sz;
- int id;
- int channel;
- u8 volume_type;
- u8 num_pds;
- u8 responding;
- u8 percent_complete;
- u8 direct_io_enabled;
- u8 stripe_exponent;
- u8 block_exponent;
- u64 max_lba;
- u32 stripe_sz;
- u32 device_info;
- u16 pd_handle[MPT_MAX_WARPDRIVE_PDS];
-};
-
-/**
- * struct _boot_device - boot device info
- * @is_raid: flag to indicate whether this is volume
- * @device: holds pointer for either struct _sas_device or
- * struct _raid_device
- */
-struct _boot_device {
- u8 is_raid;
- void *device;
-};
-
-/**
- * struct _sas_port - wide/narrow sas port information
- * @port_list: list of ports belonging to expander
- * @num_phys: number of phys belonging to this port
- * @remote_identify: attached device identification
- * @rphy: sas transport rphy object
- * @port: sas transport wide/narrow port object
- * @phy_list: _sas_phy list objects belonging to this port
- */
-struct _sas_port {
- struct list_head port_list;
- u8 num_phys;
- struct sas_identify remote_identify;
- struct sas_rphy *rphy;
- struct sas_port *port;
- struct list_head phy_list;
-};
-
-/**
- * struct _sas_phy - phy information
- * @port_siblings: list of phys belonging to a port
- * @identify: phy identification
- * @remote_identify: attached device identification
- * @phy: sas transport phy object
- * @phy_id: unique phy id
- * @handle: device handle for this phy
- * @attached_handle: device handle for attached device
- * @phy_belongs_to_port: port has been created for this phy
- */
-struct _sas_phy {
- struct list_head port_siblings;
- struct sas_identify identify;
- struct sas_identify remote_identify;
- struct sas_phy *phy;
- u8 phy_id;
- u16 handle;
- u16 attached_handle;
- u8 phy_belongs_to_port;
-};
-
-/**
- * struct _sas_node - sas_host/expander information
- * @list: list of expanders
- * @parent_dev: parent device class
- * @num_phys: number phys belonging to this sas_host/expander
- * @sas_address: sas address of this sas_host/expander
- * @handle: handle for this sas_host/expander
- * @sas_address_parent: sas address of parent expander or sas host
- * @enclosure_handle: handle for this a member of an enclosure
- * @device_info: bitwise defining capabilities of this sas_host/expander
- * @responding: used in _scsih_expander_device_mark_responding
- * @phy: a list of phys that make up this sas_host/expander
- * @sas_port_list: list of ports attached to this sas_host/expander
- */
-struct _sas_node {
- struct list_head list;
- struct device *parent_dev;
- u8 num_phys;
- u64 sas_address;
- u16 handle;
- u64 sas_address_parent;
- u16 enclosure_handle;
- u64 enclosure_logical_id;
- u8 responding;
- struct _sas_phy *phy;
- struct list_head sas_port_list;
-};
-
-/**
- * enum reset_type - reset state
- * @FORCE_BIG_HAMMER: issue diagnostic reset
- * @SOFT_RESET: issue message_unit_reset, if fails to to big hammer
- */
-enum reset_type {
- FORCE_BIG_HAMMER,
- SOFT_RESET,
-};
-
-/**
- * struct chain_tracker - firmware chain tracker
- * @chain_buffer: chain buffer
- * @chain_buffer_dma: physical address
- * @tracker_list: list of free request (ioc->free_chain_list)
- */
-struct chain_tracker {
- void *chain_buffer;
- dma_addr_t chain_buffer_dma;
- struct list_head tracker_list;
-};
-
-/**
- * struct scsiio_tracker - scsi mf request tracker
- * @smid: system message id
- * @scmd: scsi request pointer
- * @cb_idx: callback index
- * @direct_io: To indicate whether I/O is direct (WARPDRIVE)
- * @chain_list: list of chains associated to this IO
- * @tracker_list: list of free request (ioc->free_list)
- */
-struct scsiio_tracker {
- u16 smid;
- struct scsi_cmnd *scmd;
- u8 cb_idx;
- u8 direct_io;
- struct list_head chain_list;
- struct list_head tracker_list;
-};
-
-/**
- * struct request_tracker - firmware request tracker
- * @smid: system message id
- * @cb_idx: callback index
- * @tracker_list: list of free request (ioc->free_list)
- */
-struct request_tracker {
- u16 smid;
- u8 cb_idx;
- struct list_head tracker_list;
-};
-
-/**
- * struct _tr_list - target reset list
- * @handle: device handle
- * @state: state machine
- */
-struct _tr_list {
- struct list_head list;
- u16 handle;
- u16 state;
-};
-
-typedef void (*MPT_ADD_SGE)(void *paddr, u32 flags_length, dma_addr_t dma_addr);
-
-/**
- * struct adapter_reply_queue - the reply queue struct
- * @ioc: per adapter object
- * @msix_index: msix index into vector table
- * @vector: irq vector
- * @reply_post_host_index: head index in the pool where FW completes IO
- * @reply_post_free: reply post base virt address
- * @name: the name registered to request_irq()
- * @busy: isr is actively processing replies on another cpu
- * @list: this list
-*/
-struct adapter_reply_queue {
- struct MPT2SAS_ADAPTER *ioc;
- u8 msix_index;
- unsigned int vector;
- u32 reply_post_host_index;
- Mpi2ReplyDescriptorsUnion_t *reply_post_free;
- char name[MPT_NAME_LENGTH];
- atomic_t busy;
- cpumask_var_t affinity_hint;
- struct list_head list;
-};
-
-/* IOC Facts and Port Facts converted from little endian to cpu */
-union mpi2_version_union {
- MPI2_VERSION_STRUCT Struct;
- u32 Word;
-};
-
-struct mpt2sas_facts {
- u16 MsgVersion;
- u16 HeaderVersion;
- u8 IOCNumber;
- u8 VP_ID;
- u8 VF_ID;
- u16 IOCExceptions;
- u16 IOCStatus;
- u32 IOCLogInfo;
- u8 MaxChainDepth;
- u8 WhoInit;
- u8 NumberOfPorts;
- u8 MaxMSIxVectors;
- u16 RequestCredit;
- u16 ProductID;
- u32 IOCCapabilities;
- union mpi2_version_union FWVersion;
- u16 IOCRequestFrameSize;
- u16 Reserved3;
- u16 MaxInitiators;
- u16 MaxTargets;
- u16 MaxSasExpanders;
- u16 MaxEnclosures;
- u16 ProtocolFlags;
- u16 HighPriorityCredit;
- u16 MaxReplyDescriptorPostQueueDepth;
- u8 ReplyFrameSize;
- u8 MaxVolumes;
- u16 MaxDevHandle;
- u16 MaxPersistentEntries;
- u16 MinDevHandle;
-};
-
-struct mpt2sas_port_facts {
- u8 PortNumber;
- u8 VP_ID;
- u8 VF_ID;
- u8 PortType;
- u16 MaxPostedCmdBuffers;
-};
-
-struct reply_post_struct {
- Mpi2ReplyDescriptorsUnion_t *reply_post_free;
- dma_addr_t reply_post_free_dma;
-};
-
-/**
- * enum mutex_type - task management mutex type
- * @TM_MUTEX_OFF: mutex is not required becuase calling function is acquiring it
- * @TM_MUTEX_ON: mutex is required
- */
-enum mutex_type {
- TM_MUTEX_OFF = 0,
- TM_MUTEX_ON = 1,
-};
-
-typedef void (*MPT2SAS_FLUSH_RUNNING_CMDS)(struct MPT2SAS_ADAPTER *ioc);
-/**
- * struct MPT2SAS_ADAPTER - per adapter struct
- * @list: ioc_list
- * @shost: shost object
- * @id: unique adapter id
- * @cpu_count: number online cpus
- * @name: generic ioc string
- * @tmp_string: tmp string used for logging
- * @pdev: pci pdev object
- * @chip: memory mapped register space
- * @chip_phys: physical addrss prior to mapping
- * @logging_level: see mpt2sas_debug.h
- * @fwfault_debug: debuging FW timeouts
- * @ir_firmware: IR firmware present
- * @bars: bitmask of BAR's that must be configured
- * @mask_interrupts: ignore interrupt
- * @dma_mask: used to set the consistent dma mask
- * @fault_reset_work_q_name: fw fault work queue
- * @fault_reset_work_q: ""
- * @fault_reset_work: ""
- * @firmware_event_name: fw event work queue
- * @firmware_event_thread: ""
- * @fw_events_off: flag to turn off fw event handling
- * @fw_event_lock:
- * @fw_event_list: list of fw events
- * @aen_event_read_flag: event log was read
- * @broadcast_aen_busy: broadcast aen waiting to be serviced
- * @shost_recovery: host reset in progress
- * @ioc_reset_in_progress_lock:
- * @ioc_link_reset_in_progress: phy/hard reset in progress
- * @ignore_loginfos: ignore loginfos during task management
- * @remove_host: flag for when driver unloads, to avoid sending dev resets
- * @pci_error_recovery: flag to prevent ioc access until slot reset completes
- * @wait_for_discovery_to_complete: flag set at driver load time when
- * waiting on reporting devices
- * @is_driver_loading: flag set at driver load time
- * @port_enable_failed: flag set when port enable has failed
- * @start_scan: flag set from scan_start callback, cleared from _mpt2sas_fw_work
- * @start_scan_failed: means port enable failed, return's the ioc_status
- * @msix_enable: flag indicating msix is enabled
- * @msix_vector_count: number msix vectors
- * @cpu_msix_table: table for mapping cpus to msix index
- * @cpu_msix_table_sz: table size
- * @schedule_dead_ioc_flush_running_cmds: callback to flush pending commands
- * @scsi_io_cb_idx: shost generated commands
- * @tm_cb_idx: task management commands
- * @scsih_cb_idx: scsih internal commands
- * @transport_cb_idx: transport internal commands
- * @ctl_cb_idx: clt internal commands
- * @base_cb_idx: base internal commands
- * @config_cb_idx: base internal commands
- * @tm_tr_cb_idx : device removal target reset handshake
- * @tm_tr_volume_cb_idx : volume removal target reset
- * @base_cmds:
- * @transport_cmds:
- * @scsih_cmds:
- * @tm_cmds:
- * @ctl_cmds:
- * @config_cmds:
- * @base_add_sg_single: handler for either 32/64 bit sgl's
- * @event_type: bits indicating which events to log
- * @event_context: unique id for each logged event
- * @event_log: event log pointer
- * @event_masks: events that are masked
- * @facts: static facts data
- * @pfacts: static port facts data
- * @manu_pg0: static manufacturing page 0
- * @manu_pg10: static manufacturing page 10
- * @bios_pg2: static bios page 2
- * @bios_pg3: static bios page 3
- * @ioc_pg8: static ioc page 8
- * @iounit_pg0: static iounit page 0
- * @iounit_pg1: static iounit page 1
- * @iounit_pg8: static iounit page 8
- * @sas_hba: sas host object
- * @sas_expander_list: expander object list
- * @sas_node_lock:
- * @sas_device_list: sas device object list
- * @sas_device_init_list: sas device object list (used only at init time)
- * @sas_device_lock:
- * @io_missing_delay: time for IO completed by fw when PDR enabled
- * @device_missing_delay: time for device missing by fw when PDR enabled
- * @sas_id : used for setting volume target IDs
- * @blocking_handles: bitmask used to identify which devices need blocking
- * @pd_handles : bitmask for PD handles
- * @pd_handles_sz : size of pd_handle bitmask
- * @config_page_sz: config page size
- * @config_page: reserve memory for config page payload
- * @config_page_dma:
- * @hba_queue_depth: hba request queue depth
- * @sge_size: sg element size for either 32/64 bit
- * @scsiio_depth: SCSI_IO queue depth
- * @request_sz: per request frame size
- * @request: pool of request frames
- * @request_dma:
- * @request_dma_sz:
- * @scsi_lookup: firmware request tracker list
- * @scsi_lookup_lock:
- * @free_list: free list of request
- * @chain: pool of chains
- * @pending_io_count:
- * @reset_wq:
- * @chain_dma:
- * @max_sges_in_main_message: number sg elements in main message
- * @max_sges_in_chain_message: number sg elements per chain
- * @chains_needed_per_io: max chains per io
- * @chain_offset_value_for_main_message: location 1st sg in main
- * @chain_depth: total chains allocated
- * @hi_priority_smid:
- * @hi_priority:
- * @hi_priority_dma:
- * @hi_priority_depth:
- * @hpr_lookup:
- * @hpr_free_list:
- * @internal_smid:
- * @internal:
- * @internal_dma:
- * @internal_depth:
- * @internal_lookup:
- * @internal_free_list:
- * @sense: pool of sense
- * @sense_dma:
- * @sense_dma_pool:
- * @reply_depth: hba reply queue depth:
- * @reply_sz: per reply frame size:
- * @reply: pool of replys:
- * @reply_dma:
- * @reply_dma_pool:
- * @reply_free_queue_depth: reply free depth
- * @reply_free: pool for reply free queue (32 bit addr)
- * @reply_free_dma:
- * @reply_free_dma_pool:
- * @reply_free_host_index: tail index in pool to insert free replys
- * @reply_post_queue_depth: reply post queue depth
- * @reply_post_struct: struct for reply_post_free physical & virt address
- * @rdpq_array_capable: FW supports multiple reply queue addresses in ioc_init
- * @rdpq_array_enable: rdpq_array support is enabled in the driver
- * @rdpq_array_enable_assigned: this ensures that rdpq_array_enable flag
- * is assigned only ones
- * @reply_queue_count: number of reply queue's
- * @reply_queue_list: link list contaning the reply queue info
- * @reply_post_host_index: head index in the pool where FW completes IO
- * @delayed_tr_list: target reset link list
- * @delayed_tr_volume_list: volume target reset link list
- * @@temp_sensors_count: flag to carry the number of temperature sensors
- */
-struct MPT2SAS_ADAPTER {
- struct list_head list;
- struct Scsi_Host *shost;
- u8 id;
- int cpu_count;
- char name[MPT_NAME_LENGTH];
- char tmp_string[MPT_STRING_LENGTH];
- struct pci_dev *pdev;
- Mpi2SystemInterfaceRegs_t __iomem *chip;
- resource_size_t chip_phys;
- int logging_level;
- int fwfault_debug;
- u8 ir_firmware;
- int bars;
- u8 mask_interrupts;
- int dma_mask;
-
- /* fw fault handler */
- char fault_reset_work_q_name[20];
- struct workqueue_struct *fault_reset_work_q;
- struct delayed_work fault_reset_work;
-
- /* fw event handler */
- char firmware_event_name[20];
- struct workqueue_struct *firmware_event_thread;
- spinlock_t fw_event_lock;
- struct list_head fw_event_list;
-
- /* misc flags */
- int aen_event_read_flag;
- u8 broadcast_aen_busy;
- u16 broadcast_aen_pending;
- u8 shost_recovery;
-
- struct mutex reset_in_progress_mutex;
- spinlock_t ioc_reset_in_progress_lock;
- u8 ioc_link_reset_in_progress;
- u8 ioc_reset_in_progress_status;
-
- u8 ignore_loginfos;
- u8 remove_host;
- u8 pci_error_recovery;
- u8 wait_for_discovery_to_complete;
- struct completion port_enable_done;
- u8 is_driver_loading;
- u8 port_enable_failed;
-
- u8 start_scan;
- u16 start_scan_failed;
-
- u8 msix_enable;
- u16 msix_vector_count;
- u8 *cpu_msix_table;
- resource_size_t __iomem **reply_post_host_index;
- u16 cpu_msix_table_sz;
- u32 ioc_reset_count;
- MPT2SAS_FLUSH_RUNNING_CMDS schedule_dead_ioc_flush_running_cmds;
- u32 non_operational_loop;
-
- /* internal commands, callback index */
- u8 scsi_io_cb_idx;
- u8 tm_cb_idx;
- u8 transport_cb_idx;
- u8 scsih_cb_idx;
- u8 ctl_cb_idx;
- u8 base_cb_idx;
- u8 port_enable_cb_idx;
- u8 config_cb_idx;
- u8 tm_tr_cb_idx;
- u8 tm_tr_volume_cb_idx;
- u8 tm_sas_control_cb_idx;
- struct _internal_cmd base_cmds;
- struct _internal_cmd port_enable_cmds;
- struct _internal_cmd transport_cmds;
- struct _internal_cmd scsih_cmds;
- struct _internal_cmd tm_cmds;
- struct _internal_cmd ctl_cmds;
- struct _internal_cmd config_cmds;
-
- MPT_ADD_SGE base_add_sg_single;
-
- /* event log */
- u32 event_type[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS];
- u32 event_context;
- void *event_log;
- u32 event_masks[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS];
-
- /* static config pages */
- struct mpt2sas_facts facts;
- struct mpt2sas_port_facts *pfacts;
- Mpi2ManufacturingPage0_t manu_pg0;
- Mpi2BiosPage2_t bios_pg2;
- Mpi2BiosPage3_t bios_pg3;
- Mpi2IOCPage8_t ioc_pg8;
- Mpi2IOUnitPage0_t iounit_pg0;
- Mpi2IOUnitPage1_t iounit_pg1;
- Mpi2IOUnitPage8_t iounit_pg8;
-
- struct _boot_device req_boot_device;
- struct _boot_device req_alt_boot_device;
- struct _boot_device current_boot_device;
-
- /* sas hba, expander, and device list */
- struct _sas_node sas_hba;
- struct list_head sas_expander_list;
- spinlock_t sas_node_lock;
- struct list_head sas_device_list;
- struct list_head sas_device_init_list;
- spinlock_t sas_device_lock;
- struct list_head raid_device_list;
- spinlock_t raid_device_lock;
- u8 io_missing_delay;
- u16 device_missing_delay;
- int sas_id;
- void *blocking_handles;
- void *pd_handles;
- u16 pd_handles_sz;
-
- /* config page */
- u16 config_page_sz;
- void *config_page;
- dma_addr_t config_page_dma;
-
- /* scsiio request */
- u16 hba_queue_depth;
- u16 sge_size;
- u16 scsiio_depth;
- u16 request_sz;
- u8 *request;
- dma_addr_t request_dma;
- u32 request_dma_sz;
- struct scsiio_tracker *scsi_lookup;
- ulong scsi_lookup_pages;
- spinlock_t scsi_lookup_lock;
- struct list_head free_list;
- int pending_io_count;
- wait_queue_head_t reset_wq;
-
- /* chain */
- struct chain_tracker *chain_lookup;
- struct list_head free_chain_list;
- struct dma_pool *chain_dma_pool;
- ulong chain_pages;
- u16 max_sges_in_main_message;
- u16 max_sges_in_chain_message;
- u16 chains_needed_per_io;
- u16 chain_offset_value_for_main_message;
- u32 chain_depth;
-
- /* hi-priority queue */
- u16 hi_priority_smid;
- u8 *hi_priority;
- dma_addr_t hi_priority_dma;
- u16 hi_priority_depth;
- struct request_tracker *hpr_lookup;
- struct list_head hpr_free_list;
-
- /* internal queue */
- u16 internal_smid;
- u8 *internal;
- dma_addr_t internal_dma;
- u16 internal_depth;
- struct request_tracker *internal_lookup;
- struct list_head internal_free_list;
-
- /* sense */
- u8 *sense;
- dma_addr_t sense_dma;
- struct dma_pool *sense_dma_pool;
-
- /* reply */
- u16 reply_sz;
- u8 *reply;
- dma_addr_t reply_dma;
- u32 reply_dma_max_address;
- u32 reply_dma_min_address;
- struct dma_pool *reply_dma_pool;
-
- /* reply free queue */
- u16 reply_free_queue_depth;
- __le32 *reply_free;
- dma_addr_t reply_free_dma;
- struct dma_pool *reply_free_dma_pool;
- u32 reply_free_host_index;
-
- /* reply post queue */
- u16 reply_post_queue_depth;
- struct reply_post_struct *reply_post;
- u8 rdpq_array_capable;
- u8 rdpq_array_enable;
- u8 rdpq_array_enable_assigned;
- struct dma_pool *reply_post_free_dma_pool;
- u8 reply_queue_count;
- struct list_head reply_queue_list;
-
- struct list_head delayed_tr_list;
- struct list_head delayed_tr_volume_list;
- u8 temp_sensors_count;
-
- /* diag buffer support */
- u8 *diag_buffer[MPI2_DIAG_BUF_TYPE_COUNT];
- u32 diag_buffer_sz[MPI2_DIAG_BUF_TYPE_COUNT];
- dma_addr_t diag_buffer_dma[MPI2_DIAG_BUF_TYPE_COUNT];
- u8 diag_buffer_status[MPI2_DIAG_BUF_TYPE_COUNT];
- u32 unique_id[MPI2_DIAG_BUF_TYPE_COUNT];
- Mpi2ManufacturingPage10_t manu_pg10;
- u32 product_specific[MPI2_DIAG_BUF_TYPE_COUNT][23];
- u32 diagnostic_flags[MPI2_DIAG_BUF_TYPE_COUNT];
- u32 ring_buffer_offset;
- u32 ring_buffer_sz;
- u8 is_warpdrive;
- u8 hide_ir_msg;
- u8 mfg_pg10_hide_flag;
- u8 hide_drives;
-
-};
-
-typedef u8 (*MPT_CALLBACK)(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
- u32 reply);
-
-
-/* base shared API */
-extern struct list_head mpt2sas_ioc_list;
-void mpt2sas_base_start_watchdog(struct MPT2SAS_ADAPTER *ioc);
-void mpt2sas_base_stop_watchdog(struct MPT2SAS_ADAPTER *ioc);
-
-int mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc);
-void mpt2sas_base_detach(struct MPT2SAS_ADAPTER *ioc);
-int mpt2sas_base_map_resources(struct MPT2SAS_ADAPTER *ioc);
-void mpt2sas_base_free_resources(struct MPT2SAS_ADAPTER *ioc);
-int mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag,
- enum reset_type type);
-
-void *mpt2sas_base_get_msg_frame(struct MPT2SAS_ADAPTER *ioc, u16 smid);
-void *mpt2sas_base_get_sense_buffer(struct MPT2SAS_ADAPTER *ioc, u16 smid);
-void mpt2sas_base_build_zero_len_sge(struct MPT2SAS_ADAPTER *ioc, void *paddr);
-__le32 mpt2sas_base_get_sense_buffer_dma(struct MPT2SAS_ADAPTER *ioc,
- u16 smid);
-void mpt2sas_base_flush_reply_queues(struct MPT2SAS_ADAPTER *ioc);
-
-/* hi-priority queue */
-u16 mpt2sas_base_get_smid_hpr(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx);
-u16 mpt2sas_base_get_smid_scsiio(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx,
- struct scsi_cmnd *scmd);
-
-u16 mpt2sas_base_get_smid(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx);
-void mpt2sas_base_free_smid(struct MPT2SAS_ADAPTER *ioc, u16 smid);
-void mpt2sas_base_put_smid_scsi_io(struct MPT2SAS_ADAPTER *ioc, u16 smid,
- u16 handle);
-void mpt2sas_base_put_smid_hi_priority(struct MPT2SAS_ADAPTER *ioc, u16 smid);
-void mpt2sas_base_put_smid_target_assist(struct MPT2SAS_ADAPTER *ioc, u16 smid,
- u16 io_index);
-void mpt2sas_base_put_smid_default(struct MPT2SAS_ADAPTER *ioc, u16 smid);
-void mpt2sas_base_initialize_callback_handler(void);
-u8 mpt2sas_base_register_callback_handler(MPT_CALLBACK cb_func);
-void mpt2sas_base_release_callback_handler(u8 cb_idx);
-
-u8 mpt2sas_base_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
- u32 reply);
-u8 mpt2sas_port_enable_done(struct MPT2SAS_ADAPTER *ioc, u16 smid,
- u8 msix_index, u32 reply);
-void *mpt2sas_base_get_reply_virt_addr(struct MPT2SAS_ADAPTER *ioc, u32 phys_addr);
-
-u32 mpt2sas_base_get_iocstate(struct MPT2SAS_ADAPTER *ioc, int cooked);
-
-void mpt2sas_base_fault_info(struct MPT2SAS_ADAPTER *ioc , u16 fault_code);
-int mpt2sas_base_sas_iounit_control(struct MPT2SAS_ADAPTER *ioc,
- Mpi2SasIoUnitControlReply_t *mpi_reply, Mpi2SasIoUnitControlRequest_t
- *mpi_request);
-int mpt2sas_base_scsi_enclosure_processor(struct MPT2SAS_ADAPTER *ioc,
- Mpi2SepReply_t *mpi_reply, Mpi2SepRequest_t *mpi_request);
-void mpt2sas_base_validate_event_type(struct MPT2SAS_ADAPTER *ioc, u32 *event_type);
-
-void mpt2sas_halt_firmware(struct MPT2SAS_ADAPTER *ioc);
-
-void mpt2sas_base_update_missing_delay(struct MPT2SAS_ADAPTER *ioc,
- u16 device_missing_delay, u8 io_missing_delay);
-
-int mpt2sas_port_enable(struct MPT2SAS_ADAPTER *ioc);
-
-/* scsih shared API */
-void mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 msix_index,
- u32 reply);
-int mpt2sas_scsih_issue_tm(struct MPT2SAS_ADAPTER *ioc, u16 handle,
- uint channel, uint id, uint lun, u8 type, u16 smid_task,
- ulong timeout, enum mutex_type m_type);
-void mpt2sas_scsih_set_tm_flag(struct MPT2SAS_ADAPTER *ioc, u16 handle);
-void mpt2sas_scsih_clear_tm_flag(struct MPT2SAS_ADAPTER *ioc, u16 handle);
-void mpt2sas_expander_remove(struct MPT2SAS_ADAPTER *ioc, u64 sas_address);
-void mpt2sas_device_remove_by_sas_address(struct MPT2SAS_ADAPTER *ioc,
- u64 sas_address);
-struct _sas_node *mpt2sas_scsih_expander_find_by_handle(struct MPT2SAS_ADAPTER *ioc,
- u16 handle);
-struct _sas_node *mpt2sas_scsih_expander_find_by_sas_address(struct MPT2SAS_ADAPTER
- *ioc, u64 sas_address);
-struct _sas_device *mpt2sas_scsih_sas_device_find_by_sas_address(
- struct MPT2SAS_ADAPTER *ioc, u64 sas_address);
-
-void mpt2sas_port_enable_complete(struct MPT2SAS_ADAPTER *ioc);
-
-void mpt2sas_scsih_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase);
-
-/* config shared API */
-u8 mpt2sas_config_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
- u32 reply);
-int mpt2sas_config_get_number_hba_phys(struct MPT2SAS_ADAPTER *ioc, u8 *num_phys);
-int mpt2sas_config_get_manufacturing_pg0(struct MPT2SAS_ADAPTER *ioc,
- Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage0_t *config_page);
-int mpt2sas_config_get_manufacturing_pg10(struct MPT2SAS_ADAPTER *ioc,
- Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage10_t *config_page);
-int mpt2sas_config_get_bios_pg2(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
- *mpi_reply, Mpi2BiosPage2_t *config_page);
-int mpt2sas_config_get_bios_pg3(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
- *mpi_reply, Mpi2BiosPage3_t *config_page);
-int mpt2sas_config_get_iounit_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
- *mpi_reply, Mpi2IOUnitPage0_t *config_page);
-int mpt2sas_config_get_sas_device_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
- *mpi_reply, Mpi2SasDevicePage0_t *config_page, u32 form, u32 handle);
-int mpt2sas_config_get_sas_device_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
- *mpi_reply, Mpi2SasDevicePage1_t *config_page, u32 form, u32 handle);
-int mpt2sas_config_get_sas_iounit_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
- *mpi_reply, Mpi2SasIOUnitPage0_t *config_page, u16 sz);
-int mpt2sas_config_get_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
- *mpi_reply, Mpi2IOUnitPage1_t *config_page);
-int mpt2sas_config_set_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
- *mpi_reply, Mpi2IOUnitPage1_t *config_page);
-int mpt2sas_config_get_iounit_pg8(struct MPT2SAS_ADAPTER *ioc,
- Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage8_t *config_page);
-int mpt2sas_config_get_iounit_pg3(struct MPT2SAS_ADAPTER *ioc,
- Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage3_t *config_page, u16 sz);
-int mpt2sas_config_get_sas_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
- *mpi_reply, Mpi2SasIOUnitPage1_t *config_page, u16 sz);
-int mpt2sas_config_set_sas_iounit_pg1(struct MPT2SAS_ADAPTER *ioc,
- Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage1_t *config_page, u16 sz);
-int mpt2sas_config_get_ioc_pg8(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
- *mpi_reply, Mpi2IOCPage8_t *config_page);
-int mpt2sas_config_get_expander_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
- *mpi_reply, Mpi2ExpanderPage0_t *config_page, u32 form, u32 handle);
-int mpt2sas_config_get_expander_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
- *mpi_reply, Mpi2ExpanderPage1_t *config_page, u32 phy_number, u16 handle);
-int mpt2sas_config_get_enclosure_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
- *mpi_reply, Mpi2SasEnclosurePage0_t *config_page, u32 form, u32 handle);
-int mpt2sas_config_get_phy_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
- *mpi_reply, Mpi2SasPhyPage0_t *config_page, u32 phy_number);
-int mpt2sas_config_get_phy_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
- *mpi_reply, Mpi2SasPhyPage1_t *config_page, u32 phy_number);
-int mpt2sas_config_get_raid_volume_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
- *mpi_reply, Mpi2RaidVolPage1_t *config_page, u32 form, u32 handle);
-int mpt2sas_config_get_number_pds(struct MPT2SAS_ADAPTER *ioc, u16 handle, u8 *num_pds);
-int mpt2sas_config_get_raid_volume_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
- *mpi_reply, Mpi2RaidVolPage0_t *config_page, u32 form, u32 handle, u16 sz);
-int mpt2sas_config_get_phys_disk_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
- *mpi_reply, Mpi2RaidPhysDiskPage0_t *config_page, u32 form,
- u32 form_specific);
-int mpt2sas_config_get_volume_handle(struct MPT2SAS_ADAPTER *ioc, u16 pd_handle,
- u16 *volume_handle);
-int mpt2sas_config_get_volume_wwid(struct MPT2SAS_ADAPTER *ioc, u16 volume_handle,
- u64 *wwid);
-/* ctl shared API */
-extern struct device_attribute *mpt2sas_host_attrs[];
-extern struct device_attribute *mpt2sas_dev_attrs[];
-void mpt2sas_ctl_init(void);
-void mpt2sas_ctl_exit(void);
-u8 mpt2sas_ctl_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
- u32 reply);
-void mpt2sas_ctl_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase);
-void mpt2sas_ctl_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 msix_index,
- u32 reply);
-void mpt2sas_ctl_add_to_event_log(struct MPT2SAS_ADAPTER *ioc,
- Mpi2EventNotificationReply_t *mpi_reply);
-
-void mpt2sas_enable_diag_buffer(struct MPT2SAS_ADAPTER *ioc,
- u8 bits_to_regsiter);
-
-/* transport shared API */
-u8 mpt2sas_transport_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
- u32 reply);
-struct _sas_port *mpt2sas_transport_port_add(struct MPT2SAS_ADAPTER *ioc,
- u16 handle, u64 sas_address);
-void mpt2sas_transport_port_remove(struct MPT2SAS_ADAPTER *ioc, u64 sas_address,
- u64 sas_address_parent);
-int mpt2sas_transport_add_host_phy(struct MPT2SAS_ADAPTER *ioc, struct _sas_phy
- *mpt2sas_phy, Mpi2SasPhyPage0_t phy_pg0, struct device *parent_dev);
-int mpt2sas_transport_add_expander_phy(struct MPT2SAS_ADAPTER *ioc, struct _sas_phy
- *mpt2sas_phy, Mpi2ExpanderPage1_t expander_pg1, struct device *parent_dev);
-void mpt2sas_transport_update_links(struct MPT2SAS_ADAPTER *ioc,
- u64 sas_address, u16 handle, u8 phy_number, u8 link_rate);
-extern struct sas_function_template mpt2sas_transport_functions;
-extern struct scsi_transport_template *mpt2sas_transport_template;
-extern int scsi_internal_device_block(struct scsi_device *sdev);
-extern u8 mpt2sas_stm_zero_smid_handler(struct MPT2SAS_ADAPTER *ioc,
- u8 msix_index, u32 reply);
-extern int scsi_internal_device_unblock(struct scsi_device *sdev,
- enum scsi_device_state new_state);
-
-#endif /* MPT2SAS_BASE_H_INCLUDED */
Code Review / kvmfornfv.git / blobdiff