--- /dev/null
+/*
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "isci.h"
+#include "port.h"
+#include "request.h"
+
+#define SCIC_SDS_PORT_HARD_RESET_TIMEOUT (1000)
+#define SCU_DUMMY_INDEX (0xFFFF)
+
+#undef C
+#define C(a) (#a)
+const char *port_state_name(enum sci_port_states state)
+{
+ static const char * const strings[] = PORT_STATES;
+
+ return strings[state];
+}
+#undef C
+
+static struct device *sciport_to_dev(struct isci_port *iport)
+{
+ int i = iport->physical_port_index;
+ struct isci_port *table;
+ struct isci_host *ihost;
+
+ if (i == SCIC_SDS_DUMMY_PORT)
+ i = SCI_MAX_PORTS+1;
+
+ table = iport - i;
+ ihost = container_of(table, typeof(*ihost), ports[0]);
+
+ return &ihost->pdev->dev;
+}
+
+static void sci_port_get_protocols(struct isci_port *iport, struct sci_phy_proto *proto)
+{
+ u8 index;
+
+ proto->all = 0;
+ for (index = 0; index < SCI_MAX_PHYS; index++) {
+ struct isci_phy *iphy = iport->phy_table[index];
+
+ if (!iphy)
+ continue;
+ sci_phy_get_protocols(iphy, proto);
+ }
+}
+
+static u32 sci_port_get_phys(struct isci_port *iport)
+{
+ u32 index;
+ u32 mask;
+
+ mask = 0;
+ for (index = 0; index < SCI_MAX_PHYS; index++)
+ if (iport->phy_table[index])
+ mask |= (1 << index);
+
+ return mask;
+}
+
+/**
+ * sci_port_get_properties() - This method simply returns the properties
+ * regarding the port, such as: physical index, protocols, sas address, etc.
+ * @port: this parameter specifies the port for which to retrieve the physical
+ * index.
+ * @properties: This parameter specifies the properties structure into which to
+ * copy the requested information.
+ *
+ * Indicate if the user specified a valid port. SCI_SUCCESS This value is
+ * returned if the specified port was valid. SCI_FAILURE_INVALID_PORT This
+ * value is returned if the specified port is not valid. When this value is
+ * returned, no data is copied to the properties output parameter.
+ */
+enum sci_status sci_port_get_properties(struct isci_port *iport,
+ struct sci_port_properties *prop)
+{
+ if (!iport || iport->logical_port_index == SCIC_SDS_DUMMY_PORT)
+ return SCI_FAILURE_INVALID_PORT;
+
+ prop->index = iport->logical_port_index;
+ prop->phy_mask = sci_port_get_phys(iport);
+ sci_port_get_sas_address(iport, &prop->local.sas_address);
+ sci_port_get_protocols(iport, &prop->local.protocols);
+ sci_port_get_attached_sas_address(iport, &prop->remote.sas_address);
+
+ return SCI_SUCCESS;
+}
+
+static void sci_port_bcn_enable(struct isci_port *iport)
+{
+ struct isci_phy *iphy;
+ u32 val;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(iport->phy_table); i++) {
+ iphy = iport->phy_table[i];
+ if (!iphy)
+ continue;
+ val = readl(&iphy->link_layer_registers->link_layer_control);
+ /* clear the bit by writing 1. */
+ writel(val, &iphy->link_layer_registers->link_layer_control);
+ }
+}
+
+static void isci_port_bc_change_received(struct isci_host *ihost,
+ struct isci_port *iport,
+ struct isci_phy *iphy)
+{
+ dev_dbg(&ihost->pdev->dev,
+ "%s: isci_phy = %p, sas_phy = %p\n",
+ __func__, iphy, &iphy->sas_phy);
+
+ ihost->sas_ha.notify_port_event(&iphy->sas_phy, PORTE_BROADCAST_RCVD);
+ sci_port_bcn_enable(iport);
+}
+
+static void isci_port_link_up(struct isci_host *isci_host,
+ struct isci_port *iport,
+ struct isci_phy *iphy)
+{
+ unsigned long flags;
+ struct sci_port_properties properties;
+ unsigned long success = true;
+
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: isci_port = %p\n",
+ __func__, iport);
+
+ spin_lock_irqsave(&iphy->sas_phy.frame_rcvd_lock, flags);
+
+ sci_port_get_properties(iport, &properties);
+
+ if (iphy->protocol == SAS_PROTOCOL_SATA) {
+ u64 attached_sas_address;
+
+ iphy->sas_phy.oob_mode = SATA_OOB_MODE;
+ iphy->sas_phy.frame_rcvd_size = sizeof(struct dev_to_host_fis);
+
+ /*
+ * For direct-attached SATA devices, the SCI core will
+ * automagically assign a SAS address to the end device
+ * for the purpose of creating a port. This SAS address
+ * will not be the same as assigned to the PHY and needs
+ * to be obtained from struct sci_port_properties properties.
+ */
+ attached_sas_address = properties.remote.sas_address.high;
+ attached_sas_address <<= 32;
+ attached_sas_address |= properties.remote.sas_address.low;
+ swab64s(&attached_sas_address);
+
+ memcpy(&iphy->sas_phy.attached_sas_addr,
+ &attached_sas_address, sizeof(attached_sas_address));
+ } else if (iphy->protocol == SAS_PROTOCOL_SSP) {
+ iphy->sas_phy.oob_mode = SAS_OOB_MODE;
+ iphy->sas_phy.frame_rcvd_size = sizeof(struct sas_identify_frame);
+
+ /* Copy the attached SAS address from the IAF */
+ memcpy(iphy->sas_phy.attached_sas_addr,
+ iphy->frame_rcvd.iaf.sas_addr, SAS_ADDR_SIZE);
+ } else {
+ dev_err(&isci_host->pdev->dev, "%s: unknown target\n", __func__);
+ success = false;
+ }
+
+ iphy->sas_phy.phy->negotiated_linkrate = sci_phy_linkrate(iphy);
+
+ spin_unlock_irqrestore(&iphy->sas_phy.frame_rcvd_lock, flags);
+
+ /* Notify libsas that we have an address frame, if indeed
+ * we've found an SSP, SMP, or STP target */
+ if (success)
+ isci_host->sas_ha.notify_port_event(&iphy->sas_phy,
+ PORTE_BYTES_DMAED);
+}
+
+
+/**
+ * isci_port_link_down() - This function is called by the sci core when a link
+ * becomes inactive.
+ * @isci_host: This parameter specifies the isci host object.
+ * @phy: This parameter specifies the isci phy with the active link.
+ * @port: This parameter specifies the isci port with the active link.
+ *
+ */
+static void isci_port_link_down(struct isci_host *isci_host,
+ struct isci_phy *isci_phy,
+ struct isci_port *isci_port)
+{
+ struct isci_remote_device *isci_device;
+
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: isci_port = %p\n", __func__, isci_port);
+
+ if (isci_port) {
+
+ /* check to see if this is the last phy on this port. */
+ if (isci_phy->sas_phy.port &&
+ isci_phy->sas_phy.port->num_phys == 1) {
+ /* change the state for all devices on this port. The
+ * next task sent to this device will be returned as
+ * SAS_TASK_UNDELIVERED, and the scsi mid layer will
+ * remove the target
+ */
+ list_for_each_entry(isci_device,
+ &isci_port->remote_dev_list,
+ node) {
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: isci_device = %p\n",
+ __func__, isci_device);
+ set_bit(IDEV_GONE, &isci_device->flags);
+ }
+ }
+ }
+
+ /* Notify libsas of the borken link, this will trigger calls to our
+ * isci_port_deformed and isci_dev_gone functions.
+ */
+ sas_phy_disconnected(&isci_phy->sas_phy);
+ isci_host->sas_ha.notify_phy_event(&isci_phy->sas_phy,
+ PHYE_LOSS_OF_SIGNAL);
+
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: isci_port = %p - Done\n", __func__, isci_port);
+}
+
+static bool is_port_ready_state(enum sci_port_states state)
+{
+ switch (state) {
+ case SCI_PORT_READY:
+ case SCI_PORT_SUB_WAITING:
+ case SCI_PORT_SUB_OPERATIONAL:
+ case SCI_PORT_SUB_CONFIGURING:
+ return true;
+ default:
+ return false;
+ }
+}
+
+/* flag dummy rnc hanling when exiting a ready state */
+static void port_state_machine_change(struct isci_port *iport,
+ enum sci_port_states state)
+{
+ struct sci_base_state_machine *sm = &iport->sm;
+ enum sci_port_states old_state = sm->current_state_id;
+
+ if (is_port_ready_state(old_state) && !is_port_ready_state(state))
+ iport->ready_exit = true;
+
+ sci_change_state(sm, state);
+ iport->ready_exit = false;
+}
+
+/**
+ * isci_port_hard_reset_complete() - This function is called by the sci core
+ * when the hard reset complete notification has been received.
+ * @port: This parameter specifies the sci port with the active link.
+ * @completion_status: This parameter specifies the core status for the reset
+ * process.
+ *
+ */
+static void isci_port_hard_reset_complete(struct isci_port *isci_port,
+ enum sci_status completion_status)
+{
+ struct isci_host *ihost = isci_port->owning_controller;
+
+ dev_dbg(&ihost->pdev->dev,
+ "%s: isci_port = %p, completion_status=%x\n",
+ __func__, isci_port, completion_status);
+
+ /* Save the status of the hard reset from the port. */
+ isci_port->hard_reset_status = completion_status;
+
+ if (completion_status != SCI_SUCCESS) {
+
+ /* The reset failed. The port state is now SCI_PORT_FAILED. */
+ if (isci_port->active_phy_mask == 0) {
+ int phy_idx = isci_port->last_active_phy;
+ struct isci_phy *iphy = &ihost->phys[phy_idx];
+
+ /* Generate the link down now to the host, since it
+ * was intercepted by the hard reset state machine when
+ * it really happened.
+ */
+ isci_port_link_down(ihost, iphy, isci_port);
+ }
+ /* Advance the port state so that link state changes will be
+ * noticed.
+ */
+ port_state_machine_change(isci_port, SCI_PORT_SUB_WAITING);
+
+ }
+ clear_bit(IPORT_RESET_PENDING, &isci_port->state);
+ wake_up(&ihost->eventq);
+
+}
+
+/* This method will return a true value if the specified phy can be assigned to
+ * this port The following is a list of phys for each port that are allowed: -
+ * Port 0 - 3 2 1 0 - Port 1 - 1 - Port 2 - 3 2 - Port 3 - 3 This method
+ * doesn't preclude all configurations. It merely ensures that a phy is part
+ * of the allowable set of phy identifiers for that port. For example, one
+ * could assign phy 3 to port 0 and no other phys. Please refer to
+ * sci_port_is_phy_mask_valid() for information regarding whether the
+ * phy_mask for a port can be supported. bool true if this is a valid phy
+ * assignment for the port false if this is not a valid phy assignment for the
+ * port
+ */
+bool sci_port_is_valid_phy_assignment(struct isci_port *iport, u32 phy_index)
+{
+ struct isci_host *ihost = iport->owning_controller;
+ struct sci_user_parameters *user = &ihost->user_parameters;
+
+ /* Initialize to invalid value. */
+ u32 existing_phy_index = SCI_MAX_PHYS;
+ u32 index;
+
+ if ((iport->physical_port_index == 1) && (phy_index != 1))
+ return false;
+
+ if (iport->physical_port_index == 3 && phy_index != 3)
+ return false;
+
+ if (iport->physical_port_index == 2 &&
+ (phy_index == 0 || phy_index == 1))
+ return false;
+
+ for (index = 0; index < SCI_MAX_PHYS; index++)
+ if (iport->phy_table[index] && index != phy_index)
+ existing_phy_index = index;
+
+ /* Ensure that all of the phys in the port are capable of
+ * operating at the same maximum link rate.
+ */
+ if (existing_phy_index < SCI_MAX_PHYS &&
+ user->phys[phy_index].max_speed_generation !=
+ user->phys[existing_phy_index].max_speed_generation)
+ return false;
+
+ return true;
+}
+
+/**
+ *
+ * @sci_port: This is the port object for which to determine if the phy mask
+ * can be supported.
+ *
+ * This method will return a true value if the port's phy mask can be supported
+ * by the SCU. The following is a list of valid PHY mask configurations for
+ * each port: - Port 0 - [[3 2] 1] 0 - Port 1 - [1] - Port 2 - [[3] 2]
+ * - Port 3 - [3] This method returns a boolean indication specifying if the
+ * phy mask can be supported. true if this is a valid phy assignment for the
+ * port false if this is not a valid phy assignment for the port
+ */
+static bool sci_port_is_phy_mask_valid(
+ struct isci_port *iport,
+ u32 phy_mask)
+{
+ if (iport->physical_port_index == 0) {
+ if (((phy_mask & 0x0F) == 0x0F)
+ || ((phy_mask & 0x03) == 0x03)
+ || ((phy_mask & 0x01) == 0x01)
+ || (phy_mask == 0))
+ return true;
+ } else if (iport->physical_port_index == 1) {
+ if (((phy_mask & 0x02) == 0x02)
+ || (phy_mask == 0))
+ return true;
+ } else if (iport->physical_port_index == 2) {
+ if (((phy_mask & 0x0C) == 0x0C)
+ || ((phy_mask & 0x04) == 0x04)
+ || (phy_mask == 0))
+ return true;
+ } else if (iport->physical_port_index == 3) {
+ if (((phy_mask & 0x08) == 0x08)
+ || (phy_mask == 0))
+ return true;
+ }
+
+ return false;
+}
+
+/*
+ * This method retrieves a currently active (i.e. connected) phy contained in
+ * the port. Currently, the lowest order phy that is connected is returned.
+ * This method returns a pointer to a SCIS_SDS_PHY object. NULL This value is
+ * returned if there are no currently active (i.e. connected to a remote end
+ * point) phys contained in the port. All other values specify a struct sci_phy
+ * object that is active in the port.
+ */
+static struct isci_phy *sci_port_get_a_connected_phy(struct isci_port *iport)
+{
+ u32 index;
+ struct isci_phy *iphy;
+
+ for (index = 0; index < SCI_MAX_PHYS; index++) {
+ /* Ensure that the phy is both part of the port and currently
+ * connected to the remote end-point.
+ */
+ iphy = iport->phy_table[index];
+ if (iphy && sci_port_active_phy(iport, iphy))
+ return iphy;
+ }
+
+ return NULL;
+}
+
+static enum sci_status sci_port_set_phy(struct isci_port *iport, struct isci_phy *iphy)
+{
+ /* Check to see if we can add this phy to a port
+ * that means that the phy is not part of a port and that the port does
+ * not already have a phy assinged to the phy index.
+ */
+ if (!iport->phy_table[iphy->phy_index] &&
+ !phy_get_non_dummy_port(iphy) &&
+ sci_port_is_valid_phy_assignment(iport, iphy->phy_index)) {
+ /* Phy is being added in the stopped state so we are in MPC mode
+ * make logical port index = physical port index
+ */
+ iport->logical_port_index = iport->physical_port_index;
+ iport->phy_table[iphy->phy_index] = iphy;
+ sci_phy_set_port(iphy, iport);
+
+ return SCI_SUCCESS;
+ }
+
+ return SCI_FAILURE;
+}
+
+static enum sci_status sci_port_clear_phy(struct isci_port *iport, struct isci_phy *iphy)
+{
+ /* Make sure that this phy is part of this port */
+ if (iport->phy_table[iphy->phy_index] == iphy &&
+ phy_get_non_dummy_port(iphy) == iport) {
+ struct isci_host *ihost = iport->owning_controller;
+
+ /* Yep it is assigned to this port so remove it */
+ sci_phy_set_port(iphy, &ihost->ports[SCI_MAX_PORTS]);
+ iport->phy_table[iphy->phy_index] = NULL;
+ return SCI_SUCCESS;
+ }
+
+ return SCI_FAILURE;
+}
+
+void sci_port_get_sas_address(struct isci_port *iport, struct sci_sas_address *sas)
+{
+ u32 index;
+
+ sas->high = 0;
+ sas->low = 0;
+ for (index = 0; index < SCI_MAX_PHYS; index++)
+ if (iport->phy_table[index])
+ sci_phy_get_sas_address(iport->phy_table[index], sas);
+}
+
+void sci_port_get_attached_sas_address(struct isci_port *iport, struct sci_sas_address *sas)
+{
+ struct isci_phy *iphy;
+
+ /*
+ * Ensure that the phy is both part of the port and currently
+ * connected to the remote end-point.
+ */
+ iphy = sci_port_get_a_connected_phy(iport);
+ if (iphy) {
+ if (iphy->protocol != SAS_PROTOCOL_SATA) {
+ sci_phy_get_attached_sas_address(iphy, sas);
+ } else {
+ sci_phy_get_sas_address(iphy, sas);
+ sas->low += iphy->phy_index;
+ }
+ } else {
+ sas->high = 0;
+ sas->low = 0;
+ }
+}
+
+/**
+ * sci_port_construct_dummy_rnc() - create dummy rnc for si workaround
+ *
+ * @sci_port: logical port on which we need to create the remote node context
+ * @rni: remote node index for this remote node context.
+ *
+ * This routine will construct a dummy remote node context data structure
+ * This structure will be posted to the hardware to work around a scheduler
+ * error in the hardware.
+ */
+static void sci_port_construct_dummy_rnc(struct isci_port *iport, u16 rni)
+{
+ union scu_remote_node_context *rnc;
+
+ rnc = &iport->owning_controller->remote_node_context_table[rni];
+
+ memset(rnc, 0, sizeof(union scu_remote_node_context));
+
+ rnc->ssp.remote_sas_address_hi = 0;
+ rnc->ssp.remote_sas_address_lo = 0;
+
+ rnc->ssp.remote_node_index = rni;
+ rnc->ssp.remote_node_port_width = 1;
+ rnc->ssp.logical_port_index = iport->physical_port_index;
+
+ rnc->ssp.nexus_loss_timer_enable = false;
+ rnc->ssp.check_bit = false;
+ rnc->ssp.is_valid = true;
+ rnc->ssp.is_remote_node_context = true;
+ rnc->ssp.function_number = 0;
+ rnc->ssp.arbitration_wait_time = 0;
+}
+
+/*
+ * construct a dummy task context data structure. This
+ * structure will be posted to the hardwre to work around a scheduler error
+ * in the hardware.
+ */
+static void sci_port_construct_dummy_task(struct isci_port *iport, u16 tag)
+{
+ struct isci_host *ihost = iport->owning_controller;
+ struct scu_task_context *task_context;
+
+ task_context = &ihost->task_context_table[ISCI_TAG_TCI(tag)];
+ memset(task_context, 0, sizeof(struct scu_task_context));
+
+ task_context->initiator_request = 1;
+ task_context->connection_rate = 1;
+ task_context->logical_port_index = iport->physical_port_index;
+ task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_SSP;
+ task_context->task_index = ISCI_TAG_TCI(tag);
+ task_context->valid = SCU_TASK_CONTEXT_VALID;
+ task_context->context_type = SCU_TASK_CONTEXT_TYPE;
+ task_context->remote_node_index = iport->reserved_rni;
+ task_context->do_not_dma_ssp_good_response = 1;
+ task_context->task_phase = 0x01;
+}
+
+static void sci_port_destroy_dummy_resources(struct isci_port *iport)
+{
+ struct isci_host *ihost = iport->owning_controller;
+
+ if (iport->reserved_tag != SCI_CONTROLLER_INVALID_IO_TAG)
+ isci_free_tag(ihost, iport->reserved_tag);
+
+ if (iport->reserved_rni != SCU_DUMMY_INDEX)
+ sci_remote_node_table_release_remote_node_index(&ihost->available_remote_nodes,
+ 1, iport->reserved_rni);
+
+ iport->reserved_rni = SCU_DUMMY_INDEX;
+ iport->reserved_tag = SCI_CONTROLLER_INVALID_IO_TAG;
+}
+
+void sci_port_setup_transports(struct isci_port *iport, u32 device_id)
+{
+ u8 index;
+
+ for (index = 0; index < SCI_MAX_PHYS; index++) {
+ if (iport->active_phy_mask & (1 << index))
+ sci_phy_setup_transport(iport->phy_table[index], device_id);
+ }
+}
+
+static void sci_port_resume_phy(struct isci_port *iport, struct isci_phy *iphy)
+{
+ sci_phy_resume(iphy);
+ iport->enabled_phy_mask |= 1 << iphy->phy_index;
+}
+
+static void sci_port_activate_phy(struct isci_port *iport,
+ struct isci_phy *iphy,
+ u8 flags)
+{
+ struct isci_host *ihost = iport->owning_controller;
+
+ if (iphy->protocol != SAS_PROTOCOL_SATA && (flags & PF_RESUME))
+ sci_phy_resume(iphy);
+
+ iport->active_phy_mask |= 1 << iphy->phy_index;
+
+ sci_controller_clear_invalid_phy(ihost, iphy);
+
+ if (flags & PF_NOTIFY)
+ isci_port_link_up(ihost, iport, iphy);
+}
+
+void sci_port_deactivate_phy(struct isci_port *iport, struct isci_phy *iphy,
+ bool do_notify_user)
+{
+ struct isci_host *ihost = iport->owning_controller;
+
+ iport->active_phy_mask &= ~(1 << iphy->phy_index);
+ iport->enabled_phy_mask &= ~(1 << iphy->phy_index);
+ if (!iport->active_phy_mask)
+ iport->last_active_phy = iphy->phy_index;
+
+ iphy->max_negotiated_speed = SAS_LINK_RATE_UNKNOWN;
+
+ /* Re-assign the phy back to the LP as if it were a narrow port for APC
+ * mode. For MPC mode, the phy will remain in the port.
+ */
+ if (iport->owning_controller->oem_parameters.controller.mode_type ==
+ SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE)
+ writel(iphy->phy_index,
+ &iport->port_pe_configuration_register[iphy->phy_index]);
+
+ if (do_notify_user == true)
+ isci_port_link_down(ihost, iphy, iport);
+}
+
+static void sci_port_invalid_link_up(struct isci_port *iport, struct isci_phy *iphy)
+{
+ struct isci_host *ihost = iport->owning_controller;
+
+ /*
+ * Check to see if we have alreay reported this link as bad and if
+ * not go ahead and tell the SCI_USER that we have discovered an
+ * invalid link.
+ */
+ if ((ihost->invalid_phy_mask & (1 << iphy->phy_index)) == 0) {
+ ihost->invalid_phy_mask |= 1 << iphy->phy_index;
+ dev_warn(&ihost->pdev->dev, "Invalid link up!\n");
+ }
+}
+
+/**
+ * sci_port_general_link_up_handler - phy can be assigned to port?
+ * @sci_port: sci_port object for which has a phy that has gone link up.
+ * @sci_phy: This is the struct isci_phy object that has gone link up.
+ * @flags: PF_RESUME, PF_NOTIFY to sci_port_activate_phy
+ *
+ * Determine if this phy can be assigned to this port . If the phy is
+ * not a valid PHY for this port then the function will notify the user.
+ * A PHY can only be part of a port if it's attached SAS ADDRESS is the
+ * same as all other PHYs in the same port.
+ */
+static void sci_port_general_link_up_handler(struct isci_port *iport,
+ struct isci_phy *iphy,
+ u8 flags)
+{
+ struct sci_sas_address port_sas_address;
+ struct sci_sas_address phy_sas_address;
+
+ sci_port_get_attached_sas_address(iport, &port_sas_address);
+ sci_phy_get_attached_sas_address(iphy, &phy_sas_address);
+
+ /* If the SAS address of the new phy matches the SAS address of
+ * other phys in the port OR this is the first phy in the port,
+ * then activate the phy and allow it to be used for operations
+ * in this port.
+ */
+ if ((phy_sas_address.high == port_sas_address.high &&
+ phy_sas_address.low == port_sas_address.low) ||
+ iport->active_phy_mask == 0) {
+ struct sci_base_state_machine *sm = &iport->sm;
+
+ sci_port_activate_phy(iport, iphy, flags);
+ if (sm->current_state_id == SCI_PORT_RESETTING)
+ port_state_machine_change(iport, SCI_PORT_READY);
+ } else
+ sci_port_invalid_link_up(iport, iphy);
+}
+
+
+
+/**
+ * This method returns false if the port only has a single phy object assigned.
+ * If there are no phys or more than one phy then the method will return
+ * true.
+ * @sci_port: The port for which the wide port condition is to be checked.
+ *
+ * bool true Is returned if this is a wide ported port. false Is returned if
+ * this is a narrow port.
+ */
+static bool sci_port_is_wide(struct isci_port *iport)
+{
+ u32 index;
+ u32 phy_count = 0;
+
+ for (index = 0; index < SCI_MAX_PHYS; index++) {
+ if (iport->phy_table[index] != NULL) {
+ phy_count++;
+ }
+ }
+
+ return phy_count != 1;
+}
+
+/**
+ * This method is called by the PHY object when the link is detected. if the
+ * port wants the PHY to continue on to the link up state then the port
+ * layer must return true. If the port object returns false the phy object
+ * must halt its attempt to go link up.
+ * @sci_port: The port associated with the phy object.
+ * @sci_phy: The phy object that is trying to go link up.
+ *
+ * true if the phy object can continue to the link up condition. true Is
+ * returned if this phy can continue to the ready state. false Is returned if
+ * can not continue on to the ready state. This notification is in place for
+ * wide ports and direct attached phys. Since there are no wide ported SATA
+ * devices this could become an invalid port configuration.
+ */
+bool sci_port_link_detected(struct isci_port *iport, struct isci_phy *iphy)
+{
+ if ((iport->logical_port_index != SCIC_SDS_DUMMY_PORT) &&
+ (iphy->protocol == SAS_PROTOCOL_SATA)) {
+ if (sci_port_is_wide(iport)) {
+ sci_port_invalid_link_up(iport, iphy);
+ return false;
+ } else {
+ struct isci_host *ihost = iport->owning_controller;
+ struct isci_port *dst_port = &(ihost->ports[iphy->phy_index]);
+ writel(iphy->phy_index,
+ &dst_port->port_pe_configuration_register[iphy->phy_index]);
+ }
+ }
+
+ return true;
+}
+
+static void port_timeout(unsigned long data)
+{
+ struct sci_timer *tmr = (struct sci_timer *)data;
+ struct isci_port *iport = container_of(tmr, typeof(*iport), timer);
+ struct isci_host *ihost = iport->owning_controller;
+ unsigned long flags;
+ u32 current_state;
+
+ spin_lock_irqsave(&ihost->scic_lock, flags);
+
+ if (tmr->cancel)
+ goto done;
+
+ current_state = iport->sm.current_state_id;
+
+ if (current_state == SCI_PORT_RESETTING) {
+ /* if the port is still in the resetting state then the timeout
+ * fired before the reset completed.
+ */
+ port_state_machine_change(iport, SCI_PORT_FAILED);
+ } else if (current_state == SCI_PORT_STOPPED) {
+ /* if the port is stopped then the start request failed In this
+ * case stay in the stopped state.
+ */
+ dev_err(sciport_to_dev(iport),
+ "%s: SCIC Port 0x%p failed to stop before tiemout.\n",
+ __func__,
+ iport);
+ } else if (current_state == SCI_PORT_STOPPING) {
+ dev_dbg(sciport_to_dev(iport),
+ "%s: port%d: stop complete timeout\n",
+ __func__, iport->physical_port_index);
+ } else {
+ /* The port is in the ready state and we have a timer
+ * reporting a timeout this should not happen.
+ */
+ dev_err(sciport_to_dev(iport),
+ "%s: SCIC Port 0x%p is processing a timeout operation "
+ "in state %d.\n", __func__, iport, current_state);
+ }
+
+done:
+ spin_unlock_irqrestore(&ihost->scic_lock, flags);
+}
+
+/* --------------------------------------------------------------------------- */
+
+/**
+ * This function updates the hardwares VIIT entry for this port.
+ *
+ *
+ */
+static void sci_port_update_viit_entry(struct isci_port *iport)
+{
+ struct sci_sas_address sas_address;
+
+ sci_port_get_sas_address(iport, &sas_address);
+
+ writel(sas_address.high,
+ &iport->viit_registers->initiator_sas_address_hi);
+ writel(sas_address.low,
+ &iport->viit_registers->initiator_sas_address_lo);
+
+ /* This value get cleared just in case its not already cleared */
+ writel(0, &iport->viit_registers->reserved);
+
+ /* We are required to update the status register last */
+ writel(SCU_VIIT_ENTRY_ID_VIIT |
+ SCU_VIIT_IPPT_INITIATOR |
+ ((1 << iport->physical_port_index) << SCU_VIIT_ENTRY_LPVIE_SHIFT) |
+ SCU_VIIT_STATUS_ALL_VALID,
+ &iport->viit_registers->status);
+}
+
+enum sas_linkrate sci_port_get_max_allowed_speed(struct isci_port *iport)
+{
+ u16 index;
+ struct isci_phy *iphy;
+ enum sas_linkrate max_allowed_speed = SAS_LINK_RATE_6_0_GBPS;
+
+ /*
+ * Loop through all of the phys in this port and find the phy with the
+ * lowest maximum link rate. */
+ for (index = 0; index < SCI_MAX_PHYS; index++) {
+ iphy = iport->phy_table[index];
+ if (iphy && sci_port_active_phy(iport, iphy) &&
+ iphy->max_negotiated_speed < max_allowed_speed)
+ max_allowed_speed = iphy->max_negotiated_speed;
+ }
+
+ return max_allowed_speed;
+}
+
+static void sci_port_suspend_port_task_scheduler(struct isci_port *iport)
+{
+ u32 pts_control_value;
+
+ pts_control_value = readl(&iport->port_task_scheduler_registers->control);
+ pts_control_value |= SCU_PTSxCR_GEN_BIT(SUSPEND);
+ writel(pts_control_value, &iport->port_task_scheduler_registers->control);
+}
+
+/**
+ * sci_port_post_dummy_request() - post dummy/workaround request
+ * @sci_port: port to post task
+ *
+ * Prevent the hardware scheduler from posting new requests to the front
+ * of the scheduler queue causing a starvation problem for currently
+ * ongoing requests.
+ *
+ */
+static void sci_port_post_dummy_request(struct isci_port *iport)
+{
+ struct isci_host *ihost = iport->owning_controller;
+ u16 tag = iport->reserved_tag;
+ struct scu_task_context *tc;
+ u32 command;
+
+ tc = &ihost->task_context_table[ISCI_TAG_TCI(tag)];
+ tc->abort = 0;
+
+ command = SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC |
+ iport->physical_port_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT |
+ ISCI_TAG_TCI(tag);
+
+ sci_controller_post_request(ihost, command);
+}
+
+/**
+ * This routine will abort the dummy request. This will alow the hardware to
+ * power down parts of the silicon to save power.
+ *
+ * @sci_port: The port on which the task must be aborted.
+ *
+ */
+static void sci_port_abort_dummy_request(struct isci_port *iport)
+{
+ struct isci_host *ihost = iport->owning_controller;
+ u16 tag = iport->reserved_tag;
+ struct scu_task_context *tc;
+ u32 command;
+
+ tc = &ihost->task_context_table[ISCI_TAG_TCI(tag)];
+ tc->abort = 1;
+
+ command = SCU_CONTEXT_COMMAND_REQUEST_POST_TC_ABORT |
+ iport->physical_port_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT |
+ ISCI_TAG_TCI(tag);
+
+ sci_controller_post_request(ihost, command);
+}
+
+/**
+ *
+ * @sci_port: This is the struct isci_port object to resume.
+ *
+ * This method will resume the port task scheduler for this port object. none
+ */
+static void
+sci_port_resume_port_task_scheduler(struct isci_port *iport)
+{
+ u32 pts_control_value;
+
+ pts_control_value = readl(&iport->port_task_scheduler_registers->control);
+ pts_control_value &= ~SCU_PTSxCR_GEN_BIT(SUSPEND);
+ writel(pts_control_value, &iport->port_task_scheduler_registers->control);
+}
+
+static void sci_port_ready_substate_waiting_enter(struct sci_base_state_machine *sm)
+{
+ struct isci_port *iport = container_of(sm, typeof(*iport), sm);
+
+ sci_port_suspend_port_task_scheduler(iport);
+
+ iport->not_ready_reason = SCIC_PORT_NOT_READY_NO_ACTIVE_PHYS;
+
+ if (iport->active_phy_mask != 0) {
+ /* At least one of the phys on the port is ready */
+ port_state_machine_change(iport,
+ SCI_PORT_SUB_OPERATIONAL);
+ }
+}
+
+static void scic_sds_port_ready_substate_waiting_exit(
+ struct sci_base_state_machine *sm)
+{
+ struct isci_port *iport = container_of(sm, typeof(*iport), sm);
+ sci_port_resume_port_task_scheduler(iport);
+}
+
+static void sci_port_ready_substate_operational_enter(struct sci_base_state_machine *sm)
+{
+ u32 index;
+ struct isci_port *iport = container_of(sm, typeof(*iport), sm);
+ struct isci_host *ihost = iport->owning_controller;
+
+ dev_dbg(&ihost->pdev->dev, "%s: port%d ready\n",
+ __func__, iport->physical_port_index);
+
+ for (index = 0; index < SCI_MAX_PHYS; index++) {
+ if (iport->phy_table[index]) {
+ writel(iport->physical_port_index,
+ &iport->port_pe_configuration_register[
+ iport->phy_table[index]->phy_index]);
+ if (((iport->active_phy_mask^iport->enabled_phy_mask) & (1 << index)) != 0)
+ sci_port_resume_phy(iport, iport->phy_table[index]);
+ }
+ }
+
+ sci_port_update_viit_entry(iport);
+
+ /*
+ * Post the dummy task for the port so the hardware can schedule
+ * io correctly
+ */
+ sci_port_post_dummy_request(iport);
+}
+
+static void sci_port_invalidate_dummy_remote_node(struct isci_port *iport)
+{
+ struct isci_host *ihost = iport->owning_controller;
+ u8 phys_index = iport->physical_port_index;
+ union scu_remote_node_context *rnc;
+ u16 rni = iport->reserved_rni;
+ u32 command;
+
+ rnc = &ihost->remote_node_context_table[rni];
+
+ rnc->ssp.is_valid = false;
+
+ /* ensure the preceding tc abort request has reached the
+ * controller and give it ample time to act before posting the rnc
+ * invalidate
+ */
+ readl(&ihost->smu_registers->interrupt_status); /* flush */
+ udelay(10);
+
+ command = SCU_CONTEXT_COMMAND_POST_RNC_INVALIDATE |
+ phys_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | rni;
+
+ sci_controller_post_request(ihost, command);
+}
+
+/**
+ *
+ * @object: This is the object which is cast to a struct isci_port object.
+ *
+ * This method will perform the actions required by the struct isci_port on
+ * exiting the SCI_PORT_SUB_OPERATIONAL. This function reports
+ * the port not ready and suspends the port task scheduler. none
+ */
+static void sci_port_ready_substate_operational_exit(struct sci_base_state_machine *sm)
+{
+ struct isci_port *iport = container_of(sm, typeof(*iport), sm);
+ struct isci_host *ihost = iport->owning_controller;
+
+ /*
+ * Kill the dummy task for this port if it has not yet posted
+ * the hardware will treat this as a NOP and just return abort
+ * complete.
+ */
+ sci_port_abort_dummy_request(iport);
+
+ dev_dbg(&ihost->pdev->dev, "%s: port%d !ready\n",
+ __func__, iport->physical_port_index);
+
+ if (iport->ready_exit)
+ sci_port_invalidate_dummy_remote_node(iport);
+}
+
+static void sci_port_ready_substate_configuring_enter(struct sci_base_state_machine *sm)
+{
+ struct isci_port *iport = container_of(sm, typeof(*iport), sm);
+ struct isci_host *ihost = iport->owning_controller;
+
+ if (iport->active_phy_mask == 0) {
+ dev_dbg(&ihost->pdev->dev, "%s: port%d !ready\n",
+ __func__, iport->physical_port_index);
+
+ port_state_machine_change(iport, SCI_PORT_SUB_WAITING);
+ } else
+ port_state_machine_change(iport, SCI_PORT_SUB_OPERATIONAL);
+}
+
+enum sci_status sci_port_start(struct isci_port *iport)
+{
+ struct isci_host *ihost = iport->owning_controller;
+ enum sci_status status = SCI_SUCCESS;
+ enum sci_port_states state;
+ u32 phy_mask;
+
+ state = iport->sm.current_state_id;
+ if (state != SCI_PORT_STOPPED) {
+ dev_warn(sciport_to_dev(iport), "%s: in wrong state: %s\n",
+ __func__, port_state_name(state));
+ return SCI_FAILURE_INVALID_STATE;
+ }
+
+ if (iport->assigned_device_count > 0) {
+ /* TODO This is a start failure operation because
+ * there are still devices assigned to this port.
+ * There must be no devices assigned to a port on a
+ * start operation.
+ */
+ return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION;
+ }
+
+ if (iport->reserved_rni == SCU_DUMMY_INDEX) {
+ u16 rni = sci_remote_node_table_allocate_remote_node(
+ &ihost->available_remote_nodes, 1);
+
+ if (rni != SCU_DUMMY_INDEX)
+ sci_port_construct_dummy_rnc(iport, rni);
+ else
+ status = SCI_FAILURE_INSUFFICIENT_RESOURCES;
+ iport->reserved_rni = rni;
+ }
+
+ if (iport->reserved_tag == SCI_CONTROLLER_INVALID_IO_TAG) {
+ u16 tag;
+
+ tag = isci_alloc_tag(ihost);
+ if (tag == SCI_CONTROLLER_INVALID_IO_TAG)
+ status = SCI_FAILURE_INSUFFICIENT_RESOURCES;
+ else
+ sci_port_construct_dummy_task(iport, tag);
+ iport->reserved_tag = tag;
+ }
+
+ if (status == SCI_SUCCESS) {
+ phy_mask = sci_port_get_phys(iport);
+
+ /*
+ * There are one or more phys assigned to this port. Make sure
+ * the port's phy mask is in fact legal and supported by the
+ * silicon.
+ */
+ if (sci_port_is_phy_mask_valid(iport, phy_mask) == true) {
+ port_state_machine_change(iport,
+ SCI_PORT_READY);
+
+ return SCI_SUCCESS;
+ }
+ status = SCI_FAILURE;
+ }
+
+ if (status != SCI_SUCCESS)
+ sci_port_destroy_dummy_resources(iport);
+
+ return status;
+}
+
+enum sci_status sci_port_stop(struct isci_port *iport)
+{
+ enum sci_port_states state;
+
+ state = iport->sm.current_state_id;
+ switch (state) {
+ case SCI_PORT_STOPPED:
+ return SCI_SUCCESS;
+ case SCI_PORT_SUB_WAITING:
+ case SCI_PORT_SUB_OPERATIONAL:
+ case SCI_PORT_SUB_CONFIGURING:
+ case SCI_PORT_RESETTING:
+ port_state_machine_change(iport,
+ SCI_PORT_STOPPING);
+ return SCI_SUCCESS;
+ default:
+ dev_warn(sciport_to_dev(iport), "%s: in wrong state: %s\n",
+ __func__, port_state_name(state));
+ return SCI_FAILURE_INVALID_STATE;
+ }
+}
+
+static enum sci_status sci_port_hard_reset(struct isci_port *iport, u32 timeout)
+{
+ enum sci_status status = SCI_FAILURE_INVALID_PHY;
+ struct isci_phy *iphy = NULL;
+ enum sci_port_states state;
+ u32 phy_index;
+
+ state = iport->sm.current_state_id;
+ if (state != SCI_PORT_SUB_OPERATIONAL) {
+ dev_warn(sciport_to_dev(iport), "%s: in wrong state: %s\n",
+ __func__, port_state_name(state));
+ return SCI_FAILURE_INVALID_STATE;
+ }
+
+ /* Select a phy on which we can send the hard reset request. */
+ for (phy_index = 0; phy_index < SCI_MAX_PHYS && !iphy; phy_index++) {
+ iphy = iport->phy_table[phy_index];
+ if (iphy && !sci_port_active_phy(iport, iphy)) {
+ /*
+ * We found a phy but it is not ready select
+ * different phy
+ */
+ iphy = NULL;
+ }
+ }
+
+ /* If we have a phy then go ahead and start the reset procedure */
+ if (!iphy)
+ return status;
+ status = sci_phy_reset(iphy);
+
+ if (status != SCI_SUCCESS)
+ return status;
+
+ sci_mod_timer(&iport->timer, timeout);
+ iport->not_ready_reason = SCIC_PORT_NOT_READY_HARD_RESET_REQUESTED;
+
+ port_state_machine_change(iport, SCI_PORT_RESETTING);
+ return SCI_SUCCESS;
+}
+
+/**
+ * sci_port_add_phy() -
+ * @sci_port: This parameter specifies the port in which the phy will be added.
+ * @sci_phy: This parameter is the phy which is to be added to the port.
+ *
+ * This method will add a PHY to the selected port. This method returns an
+ * enum sci_status. SCI_SUCCESS the phy has been added to the port. Any other
+ * status is a failure to add the phy to the port.
+ */
+enum sci_status sci_port_add_phy(struct isci_port *iport,
+ struct isci_phy *iphy)
+{
+ enum sci_status status;
+ enum sci_port_states state;
+
+ sci_port_bcn_enable(iport);
+
+ state = iport->sm.current_state_id;
+ switch (state) {
+ case SCI_PORT_STOPPED: {
+ struct sci_sas_address port_sas_address;
+
+ /* Read the port assigned SAS Address if there is one */
+ sci_port_get_sas_address(iport, &port_sas_address);
+
+ if (port_sas_address.high != 0 && port_sas_address.low != 0) {
+ struct sci_sas_address phy_sas_address;
+
+ /* Make sure that the PHY SAS Address matches the SAS Address
+ * for this port
+ */
+ sci_phy_get_sas_address(iphy, &phy_sas_address);
+
+ if (port_sas_address.high != phy_sas_address.high ||
+ port_sas_address.low != phy_sas_address.low)
+ return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION;
+ }
+ return sci_port_set_phy(iport, iphy);
+ }
+ case SCI_PORT_SUB_WAITING:
+ case SCI_PORT_SUB_OPERATIONAL:
+ status = sci_port_set_phy(iport, iphy);
+
+ if (status != SCI_SUCCESS)
+ return status;
+
+ sci_port_general_link_up_handler(iport, iphy, PF_NOTIFY|PF_RESUME);
+ iport->not_ready_reason = SCIC_PORT_NOT_READY_RECONFIGURING;
+ port_state_machine_change(iport, SCI_PORT_SUB_CONFIGURING);
+
+ return status;
+ case SCI_PORT_SUB_CONFIGURING:
+ status = sci_port_set_phy(iport, iphy);
+
+ if (status != SCI_SUCCESS)
+ return status;
+ sci_port_general_link_up_handler(iport, iphy, PF_NOTIFY);
+
+ /* Re-enter the configuring state since this may be the last phy in
+ * the port.
+ */
+ port_state_machine_change(iport,
+ SCI_PORT_SUB_CONFIGURING);
+ return SCI_SUCCESS;
+ default:
+ dev_warn(sciport_to_dev(iport), "%s: in wrong state: %s\n",
+ __func__, port_state_name(state));
+ return SCI_FAILURE_INVALID_STATE;
+ }
+}
+
+/**
+ * sci_port_remove_phy() -
+ * @sci_port: This parameter specifies the port in which the phy will be added.
+ * @sci_phy: This parameter is the phy which is to be added to the port.
+ *
+ * This method will remove the PHY from the selected PORT. This method returns
+ * an enum sci_status. SCI_SUCCESS the phy has been removed from the port. Any
+ * other status is a failure to add the phy to the port.
+ */
+enum sci_status sci_port_remove_phy(struct isci_port *iport,
+ struct isci_phy *iphy)
+{
+ enum sci_status status;
+ enum sci_port_states state;
+
+ state = iport->sm.current_state_id;
+
+ switch (state) {
+ case SCI_PORT_STOPPED:
+ return sci_port_clear_phy(iport, iphy);
+ case SCI_PORT_SUB_OPERATIONAL:
+ status = sci_port_clear_phy(iport, iphy);
+ if (status != SCI_SUCCESS)
+ return status;
+
+ sci_port_deactivate_phy(iport, iphy, true);
+ iport->not_ready_reason = SCIC_PORT_NOT_READY_RECONFIGURING;
+ port_state_machine_change(iport,
+ SCI_PORT_SUB_CONFIGURING);
+ return SCI_SUCCESS;
+ case SCI_PORT_SUB_CONFIGURING:
+ status = sci_port_clear_phy(iport, iphy);
+
+ if (status != SCI_SUCCESS)
+ return status;
+ sci_port_deactivate_phy(iport, iphy, true);
+
+ /* Re-enter the configuring state since this may be the last phy in
+ * the port
+ */
+ port_state_machine_change(iport,
+ SCI_PORT_SUB_CONFIGURING);
+ return SCI_SUCCESS;
+ default:
+ dev_warn(sciport_to_dev(iport), "%s: in wrong state: %s\n",
+ __func__, port_state_name(state));
+ return SCI_FAILURE_INVALID_STATE;
+ }
+}
+
+enum sci_status sci_port_link_up(struct isci_port *iport,
+ struct isci_phy *iphy)
+{
+ enum sci_port_states state;
+
+ state = iport->sm.current_state_id;
+ switch (state) {
+ case SCI_PORT_SUB_WAITING:
+ /* Since this is the first phy going link up for the port we
+ * can just enable it and continue
+ */
+ sci_port_activate_phy(iport, iphy, PF_NOTIFY|PF_RESUME);
+
+ port_state_machine_change(iport,
+ SCI_PORT_SUB_OPERATIONAL);
+ return SCI_SUCCESS;
+ case SCI_PORT_SUB_OPERATIONAL:
+ sci_port_general_link_up_handler(iport, iphy, PF_NOTIFY|PF_RESUME);
+ return SCI_SUCCESS;
+ case SCI_PORT_RESETTING:
+ /* TODO We should make sure that the phy that has gone
+ * link up is the same one on which we sent the reset. It is
+ * possible that the phy on which we sent the reset is not the
+ * one that has gone link up and we want to make sure that
+ * phy being reset comes back. Consider the case where a
+ * reset is sent but before the hardware processes the reset it
+ * get a link up on the port because of a hot plug event.
+ * because of the reset request this phy will go link down
+ * almost immediately.
+ */
+
+ /* In the resetting state we don't notify the user regarding
+ * link up and link down notifications.
+ */
+ sci_port_general_link_up_handler(iport, iphy, PF_RESUME);
+ return SCI_SUCCESS;
+ default:
+ dev_warn(sciport_to_dev(iport), "%s: in wrong state: %s\n",
+ __func__, port_state_name(state));
+ return SCI_FAILURE_INVALID_STATE;
+ }
+}
+
+enum sci_status sci_port_link_down(struct isci_port *iport,
+ struct isci_phy *iphy)
+{
+ enum sci_port_states state;
+
+ state = iport->sm.current_state_id;
+ switch (state) {
+ case SCI_PORT_SUB_OPERATIONAL:
+ sci_port_deactivate_phy(iport, iphy, true);
+
+ /* If there are no active phys left in the port, then
+ * transition the port to the WAITING state until such time
+ * as a phy goes link up
+ */
+ if (iport->active_phy_mask == 0)
+ port_state_machine_change(iport,
+ SCI_PORT_SUB_WAITING);
+ return SCI_SUCCESS;
+ case SCI_PORT_RESETTING:
+ /* In the resetting state we don't notify the user regarding
+ * link up and link down notifications. */
+ sci_port_deactivate_phy(iport, iphy, false);
+ return SCI_SUCCESS;
+ default:
+ dev_warn(sciport_to_dev(iport), "%s: in wrong state: %s\n",
+ __func__, port_state_name(state));
+ return SCI_FAILURE_INVALID_STATE;
+ }
+}
+
+enum sci_status sci_port_start_io(struct isci_port *iport,
+ struct isci_remote_device *idev,
+ struct isci_request *ireq)
+{
+ enum sci_port_states state;
+
+ state = iport->sm.current_state_id;
+ switch (state) {
+ case SCI_PORT_SUB_WAITING:
+ return SCI_FAILURE_INVALID_STATE;
+ case SCI_PORT_SUB_OPERATIONAL:
+ iport->started_request_count++;
+ return SCI_SUCCESS;
+ default:
+ dev_warn(sciport_to_dev(iport), "%s: in wrong state: %s\n",
+ __func__, port_state_name(state));
+ return SCI_FAILURE_INVALID_STATE;
+ }
+}
+
+enum sci_status sci_port_complete_io(struct isci_port *iport,
+ struct isci_remote_device *idev,
+ struct isci_request *ireq)
+{
+ enum sci_port_states state;
+
+ state = iport->sm.current_state_id;
+ switch (state) {
+ case SCI_PORT_STOPPED:
+ dev_warn(sciport_to_dev(iport), "%s: in wrong state: %s\n",
+ __func__, port_state_name(state));
+ return SCI_FAILURE_INVALID_STATE;
+ case SCI_PORT_STOPPING:
+ sci_port_decrement_request_count(iport);
+
+ if (iport->started_request_count == 0)
+ port_state_machine_change(iport,
+ SCI_PORT_STOPPED);
+ break;
+ case SCI_PORT_READY:
+ case SCI_PORT_RESETTING:
+ case SCI_PORT_FAILED:
+ case SCI_PORT_SUB_WAITING:
+ case SCI_PORT_SUB_OPERATIONAL:
+ sci_port_decrement_request_count(iport);
+ break;
+ case SCI_PORT_SUB_CONFIGURING:
+ sci_port_decrement_request_count(iport);
+ if (iport->started_request_count == 0) {
+ port_state_machine_change(iport,
+ SCI_PORT_SUB_OPERATIONAL);
+ }
+ break;
+ }
+ return SCI_SUCCESS;
+}
+
+static void sci_port_enable_port_task_scheduler(struct isci_port *iport)
+{
+ u32 pts_control_value;
+
+ /* enable the port task scheduler in a suspended state */
+ pts_control_value = readl(&iport->port_task_scheduler_registers->control);
+ pts_control_value |= SCU_PTSxCR_GEN_BIT(ENABLE) | SCU_PTSxCR_GEN_BIT(SUSPEND);
+ writel(pts_control_value, &iport->port_task_scheduler_registers->control);
+}
+
+static void sci_port_disable_port_task_scheduler(struct isci_port *iport)
+{
+ u32 pts_control_value;
+
+ pts_control_value = readl(&iport->port_task_scheduler_registers->control);
+ pts_control_value &=
+ ~(SCU_PTSxCR_GEN_BIT(ENABLE) | SCU_PTSxCR_GEN_BIT(SUSPEND));
+ writel(pts_control_value, &iport->port_task_scheduler_registers->control);
+}
+
+static void sci_port_post_dummy_remote_node(struct isci_port *iport)
+{
+ struct isci_host *ihost = iport->owning_controller;
+ u8 phys_index = iport->physical_port_index;
+ union scu_remote_node_context *rnc;
+ u16 rni = iport->reserved_rni;
+ u32 command;
+
+ rnc = &ihost->remote_node_context_table[rni];
+ rnc->ssp.is_valid = true;
+
+ command = SCU_CONTEXT_COMMAND_POST_RNC_32 |
+ phys_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | rni;
+
+ sci_controller_post_request(ihost, command);
+
+ /* ensure hardware has seen the post rnc command and give it
+ * ample time to act before sending the suspend
+ */
+ readl(&ihost->smu_registers->interrupt_status); /* flush */
+ udelay(10);
+
+ command = SCU_CONTEXT_COMMAND_POST_RNC_SUSPEND_TX_RX |
+ phys_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | rni;
+
+ sci_controller_post_request(ihost, command);
+}
+
+static void sci_port_stopped_state_enter(struct sci_base_state_machine *sm)
+{
+ struct isci_port *iport = container_of(sm, typeof(*iport), sm);
+
+ if (iport->sm.previous_state_id == SCI_PORT_STOPPING) {
+ /*
+ * If we enter this state becasuse of a request to stop
+ * the port then we want to disable the hardwares port
+ * task scheduler. */
+ sci_port_disable_port_task_scheduler(iport);
+ }
+}
+
+static void sci_port_stopped_state_exit(struct sci_base_state_machine *sm)
+{
+ struct isci_port *iport = container_of(sm, typeof(*iport), sm);
+
+ /* Enable and suspend the port task scheduler */
+ sci_port_enable_port_task_scheduler(iport);
+}
+
+static void sci_port_ready_state_enter(struct sci_base_state_machine *sm)
+{
+ struct isci_port *iport = container_of(sm, typeof(*iport), sm);
+ struct isci_host *ihost = iport->owning_controller;
+ u32 prev_state;
+
+ prev_state = iport->sm.previous_state_id;
+ if (prev_state == SCI_PORT_RESETTING)
+ isci_port_hard_reset_complete(iport, SCI_SUCCESS);
+ else
+ dev_dbg(&ihost->pdev->dev, "%s: port%d !ready\n",
+ __func__, iport->physical_port_index);
+
+ /* Post and suspend the dummy remote node context for this port. */
+ sci_port_post_dummy_remote_node(iport);
+
+ /* Start the ready substate machine */
+ port_state_machine_change(iport,
+ SCI_PORT_SUB_WAITING);
+}
+
+static void sci_port_resetting_state_exit(struct sci_base_state_machine *sm)
+{
+ struct isci_port *iport = container_of(sm, typeof(*iport), sm);
+
+ sci_del_timer(&iport->timer);
+}
+
+static void sci_port_stopping_state_exit(struct sci_base_state_machine *sm)
+{
+ struct isci_port *iport = container_of(sm, typeof(*iport), sm);
+
+ sci_del_timer(&iport->timer);
+
+ sci_port_destroy_dummy_resources(iport);
+}
+
+static void sci_port_failed_state_enter(struct sci_base_state_machine *sm)
+{
+ struct isci_port *iport = container_of(sm, typeof(*iport), sm);
+
+ isci_port_hard_reset_complete(iport, SCI_FAILURE_TIMEOUT);
+}
+
+void sci_port_set_hang_detection_timeout(struct isci_port *iport, u32 timeout)
+{
+ int phy_index;
+ u32 phy_mask = iport->active_phy_mask;
+
+ if (timeout)
+ ++iport->hang_detect_users;
+ else if (iport->hang_detect_users > 1)
+ --iport->hang_detect_users;
+ else
+ iport->hang_detect_users = 0;
+
+ if (timeout || (iport->hang_detect_users == 0)) {
+ for (phy_index = 0; phy_index < SCI_MAX_PHYS; phy_index++) {
+ if ((phy_mask >> phy_index) & 1) {
+ writel(timeout,
+ &iport->phy_table[phy_index]
+ ->link_layer_registers
+ ->link_layer_hang_detection_timeout);
+ }
+ }
+ }
+}
+/* --------------------------------------------------------------------------- */
+
+static const struct sci_base_state sci_port_state_table[] = {
+ [SCI_PORT_STOPPED] = {
+ .enter_state = sci_port_stopped_state_enter,
+ .exit_state = sci_port_stopped_state_exit
+ },
+ [SCI_PORT_STOPPING] = {
+ .exit_state = sci_port_stopping_state_exit
+ },
+ [SCI_PORT_READY] = {
+ .enter_state = sci_port_ready_state_enter,
+ },
+ [SCI_PORT_SUB_WAITING] = {
+ .enter_state = sci_port_ready_substate_waiting_enter,
+ .exit_state = scic_sds_port_ready_substate_waiting_exit,
+ },
+ [SCI_PORT_SUB_OPERATIONAL] = {
+ .enter_state = sci_port_ready_substate_operational_enter,
+ .exit_state = sci_port_ready_substate_operational_exit
+ },
+ [SCI_PORT_SUB_CONFIGURING] = {
+ .enter_state = sci_port_ready_substate_configuring_enter
+ },
+ [SCI_PORT_RESETTING] = {
+ .exit_state = sci_port_resetting_state_exit
+ },
+ [SCI_PORT_FAILED] = {
+ .enter_state = sci_port_failed_state_enter,
+ }
+};
+
+void sci_port_construct(struct isci_port *iport, u8 index,
+ struct isci_host *ihost)
+{
+ sci_init_sm(&iport->sm, sci_port_state_table, SCI_PORT_STOPPED);
+
+ iport->logical_port_index = SCIC_SDS_DUMMY_PORT;
+ iport->physical_port_index = index;
+ iport->active_phy_mask = 0;
+ iport->enabled_phy_mask = 0;
+ iport->last_active_phy = 0;
+ iport->ready_exit = false;
+
+ iport->owning_controller = ihost;
+
+ iport->started_request_count = 0;
+ iport->assigned_device_count = 0;
+ iport->hang_detect_users = 0;
+
+ iport->reserved_rni = SCU_DUMMY_INDEX;
+ iport->reserved_tag = SCI_CONTROLLER_INVALID_IO_TAG;
+
+ sci_init_timer(&iport->timer, port_timeout);
+
+ iport->port_task_scheduler_registers = NULL;
+
+ for (index = 0; index < SCI_MAX_PHYS; index++)
+ iport->phy_table[index] = NULL;
+}
+
+void sci_port_broadcast_change_received(struct isci_port *iport, struct isci_phy *iphy)
+{
+ struct isci_host *ihost = iport->owning_controller;
+
+ /* notify the user. */
+ isci_port_bc_change_received(ihost, iport, iphy);
+}
+
+static void wait_port_reset(struct isci_host *ihost, struct isci_port *iport)
+{
+ wait_event(ihost->eventq, !test_bit(IPORT_RESET_PENDING, &iport->state));
+}
+
+int isci_port_perform_hard_reset(struct isci_host *ihost, struct isci_port *iport,
+ struct isci_phy *iphy)
+{
+ unsigned long flags;
+ enum sci_status status;
+ int ret = TMF_RESP_FUNC_COMPLETE;
+
+ dev_dbg(&ihost->pdev->dev, "%s: iport = %p\n",
+ __func__, iport);
+
+ spin_lock_irqsave(&ihost->scic_lock, flags);
+ set_bit(IPORT_RESET_PENDING, &iport->state);
+
+ #define ISCI_PORT_RESET_TIMEOUT SCIC_SDS_SIGNATURE_FIS_TIMEOUT
+ status = sci_port_hard_reset(iport, ISCI_PORT_RESET_TIMEOUT);
+
+ spin_unlock_irqrestore(&ihost->scic_lock, flags);
+
+ if (status == SCI_SUCCESS) {
+ wait_port_reset(ihost, iport);
+
+ dev_dbg(&ihost->pdev->dev,
+ "%s: iport = %p; hard reset completion\n",
+ __func__, iport);
+
+ if (iport->hard_reset_status != SCI_SUCCESS) {
+ ret = TMF_RESP_FUNC_FAILED;
+
+ dev_err(&ihost->pdev->dev,
+ "%s: iport = %p; hard reset failed (0x%x)\n",
+ __func__, iport, iport->hard_reset_status);
+ }
+ } else {
+ clear_bit(IPORT_RESET_PENDING, &iport->state);
+ wake_up(&ihost->eventq);
+ ret = TMF_RESP_FUNC_FAILED;
+
+ dev_err(&ihost->pdev->dev,
+ "%s: iport = %p; sci_port_hard_reset call"
+ " failed 0x%x\n",
+ __func__, iport, status);
+
+ }
+ return ret;
+}
+
+int isci_ata_check_ready(struct domain_device *dev)
+{
+ struct isci_port *iport = dev->port->lldd_port;
+ struct isci_host *ihost = dev_to_ihost(dev);
+ struct isci_remote_device *idev;
+ unsigned long flags;
+ int rc = 0;
+
+ spin_lock_irqsave(&ihost->scic_lock, flags);
+ idev = isci_lookup_device(dev);
+ spin_unlock_irqrestore(&ihost->scic_lock, flags);
+
+ if (!idev)
+ goto out;
+
+ if (test_bit(IPORT_RESET_PENDING, &iport->state))
+ goto out;
+
+ rc = !!iport->active_phy_mask;
+ out:
+ isci_put_device(idev);
+
+ return rc;
+}
+
+void isci_port_deformed(struct asd_sas_phy *phy)
+{
+ struct isci_host *ihost = phy->ha->lldd_ha;
+ struct isci_port *iport = phy->port->lldd_port;
+ unsigned long flags;
+ int i;
+
+ /* we got a port notification on a port that was subsequently
+ * torn down and libsas is just now catching up
+ */
+ if (!iport)
+ return;
+
+ spin_lock_irqsave(&ihost->scic_lock, flags);
+ for (i = 0; i < SCI_MAX_PHYS; i++) {
+ if (iport->active_phy_mask & 1 << i)
+ break;
+ }
+ spin_unlock_irqrestore(&ihost->scic_lock, flags);
+
+ if (i >= SCI_MAX_PHYS)
+ dev_dbg(&ihost->pdev->dev, "%s: port: %ld\n",
+ __func__, (long) (iport - &ihost->ports[0]));
+}
+
+void isci_port_formed(struct asd_sas_phy *phy)
+{
+ struct isci_host *ihost = phy->ha->lldd_ha;
+ struct isci_phy *iphy = to_iphy(phy);
+ struct asd_sas_port *port = phy->port;
+ struct isci_port *iport = NULL;
+ unsigned long flags;
+ int i;
+
+ /* initial ports are formed as the driver is still initializing,
+ * wait for that process to complete
+ */
+ wait_for_start(ihost);
+
+ spin_lock_irqsave(&ihost->scic_lock, flags);
+ for (i = 0; i < SCI_MAX_PORTS; i++) {
+ iport = &ihost->ports[i];
+ if (iport->active_phy_mask & 1 << iphy->phy_index)
+ break;
+ }
+ spin_unlock_irqrestore(&ihost->scic_lock, flags);
+
+ if (i >= SCI_MAX_PORTS)
+ iport = NULL;
+
+ port->lldd_port = iport;
+}
Code Review / kvmfornfv.git / blobdiff