--- /dev/null
+/*
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include <linux/circ_buf.h>
+#include <linux/device.h>
+#include <scsi/sas.h>
+#include "host.h"
+#include "isci.h"
+#include "port.h"
+#include "probe_roms.h"
+#include "remote_device.h"
+#include "request.h"
+#include "scu_completion_codes.h"
+#include "scu_event_codes.h"
+#include "registers.h"
+#include "scu_remote_node_context.h"
+#include "scu_task_context.h"
+
+#define SCU_CONTEXT_RAM_INIT_STALL_TIME 200
+
+#define smu_max_ports(dcc_value) \
+ (\
+ (((dcc_value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_MASK) \
+ >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_SHIFT) + 1 \
+ )
+
+#define smu_max_task_contexts(dcc_value) \
+ (\
+ (((dcc_value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_TC_MASK) \
+ >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_TC_SHIFT) + 1 \
+ )
+
+#define smu_max_rncs(dcc_value) \
+ (\
+ (((dcc_value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_MASK) \
+ >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_SHIFT) + 1 \
+ )
+
+#define SCIC_SDS_CONTROLLER_PHY_START_TIMEOUT 100
+
+/**
+ *
+ *
+ * The number of milliseconds to wait while a given phy is consuming power
+ * before allowing another set of phys to consume power. Ultimately, this will
+ * be specified by OEM parameter.
+ */
+#define SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL 500
+
+/**
+ * NORMALIZE_PUT_POINTER() -
+ *
+ * This macro will normalize the completion queue put pointer so its value can
+ * be used as an array inde
+ */
+#define NORMALIZE_PUT_POINTER(x) \
+ ((x) & SMU_COMPLETION_QUEUE_PUT_POINTER_MASK)
+
+
+/**
+ * NORMALIZE_EVENT_POINTER() -
+ *
+ * This macro will normalize the completion queue event entry so its value can
+ * be used as an index.
+ */
+#define NORMALIZE_EVENT_POINTER(x) \
+ (\
+ ((x) & SMU_COMPLETION_QUEUE_GET_EVENT_POINTER_MASK) \
+ >> SMU_COMPLETION_QUEUE_GET_EVENT_POINTER_SHIFT \
+ )
+
+/**
+ * NORMALIZE_GET_POINTER() -
+ *
+ * This macro will normalize the completion queue get pointer so its value can
+ * be used as an index into an array
+ */
+#define NORMALIZE_GET_POINTER(x) \
+ ((x) & SMU_COMPLETION_QUEUE_GET_POINTER_MASK)
+
+/**
+ * NORMALIZE_GET_POINTER_CYCLE_BIT() -
+ *
+ * This macro will normalize the completion queue cycle pointer so it matches
+ * the completion queue cycle bit
+ */
+#define NORMALIZE_GET_POINTER_CYCLE_BIT(x) \
+ ((SMU_CQGR_CYCLE_BIT & (x)) << (31 - SMU_COMPLETION_QUEUE_GET_CYCLE_BIT_SHIFT))
+
+/**
+ * COMPLETION_QUEUE_CYCLE_BIT() -
+ *
+ * This macro will return the cycle bit of the completion queue entry
+ */
+#define COMPLETION_QUEUE_CYCLE_BIT(x) ((x) & 0x80000000)
+
+/* Init the state machine and call the state entry function (if any) */
+void sci_init_sm(struct sci_base_state_machine *sm,
+ const struct sci_base_state *state_table, u32 initial_state)
+{
+ sci_state_transition_t handler;
+
+ sm->initial_state_id = initial_state;
+ sm->previous_state_id = initial_state;
+ sm->current_state_id = initial_state;
+ sm->state_table = state_table;
+
+ handler = sm->state_table[initial_state].enter_state;
+ if (handler)
+ handler(sm);
+}
+
+/* Call the state exit fn, update the current state, call the state entry fn */
+void sci_change_state(struct sci_base_state_machine *sm, u32 next_state)
+{
+ sci_state_transition_t handler;
+
+ handler = sm->state_table[sm->current_state_id].exit_state;
+ if (handler)
+ handler(sm);
+
+ sm->previous_state_id = sm->current_state_id;
+ sm->current_state_id = next_state;
+
+ handler = sm->state_table[sm->current_state_id].enter_state;
+ if (handler)
+ handler(sm);
+}
+
+static bool sci_controller_completion_queue_has_entries(struct isci_host *ihost)
+{
+ u32 get_value = ihost->completion_queue_get;
+ u32 get_index = get_value & SMU_COMPLETION_QUEUE_GET_POINTER_MASK;
+
+ if (NORMALIZE_GET_POINTER_CYCLE_BIT(get_value) ==
+ COMPLETION_QUEUE_CYCLE_BIT(ihost->completion_queue[get_index]))
+ return true;
+
+ return false;
+}
+
+static bool sci_controller_isr(struct isci_host *ihost)
+{
+ if (sci_controller_completion_queue_has_entries(ihost))
+ return true;
+
+ /* we have a spurious interrupt it could be that we have already
+ * emptied the completion queue from a previous interrupt
+ * FIXME: really!?
+ */
+ writel(SMU_ISR_COMPLETION, &ihost->smu_registers->interrupt_status);
+
+ /* There is a race in the hardware that could cause us not to be
+ * notified of an interrupt completion if we do not take this
+ * step. We will mask then unmask the interrupts so if there is
+ * another interrupt pending the clearing of the interrupt
+ * source we get the next interrupt message.
+ */
+ spin_lock(&ihost->scic_lock);
+ if (test_bit(IHOST_IRQ_ENABLED, &ihost->flags)) {
+ writel(0xFF000000, &ihost->smu_registers->interrupt_mask);
+ writel(0, &ihost->smu_registers->interrupt_mask);
+ }
+ spin_unlock(&ihost->scic_lock);
+
+ return false;
+}
+
+irqreturn_t isci_msix_isr(int vec, void *data)
+{
+ struct isci_host *ihost = data;
+
+ if (sci_controller_isr(ihost))
+ tasklet_schedule(&ihost->completion_tasklet);
+
+ return IRQ_HANDLED;
+}
+
+static bool sci_controller_error_isr(struct isci_host *ihost)
+{
+ u32 interrupt_status;
+
+ interrupt_status =
+ readl(&ihost->smu_registers->interrupt_status);
+ interrupt_status &= (SMU_ISR_QUEUE_ERROR | SMU_ISR_QUEUE_SUSPEND);
+
+ if (interrupt_status != 0) {
+ /*
+ * There is an error interrupt pending so let it through and handle
+ * in the callback */
+ return true;
+ }
+
+ /*
+ * There is a race in the hardware that could cause us not to be notified
+ * of an interrupt completion if we do not take this step. We will mask
+ * then unmask the error interrupts so if there was another interrupt
+ * pending we will be notified.
+ * Could we write the value of (SMU_ISR_QUEUE_ERROR | SMU_ISR_QUEUE_SUSPEND)? */
+ writel(0xff, &ihost->smu_registers->interrupt_mask);
+ writel(0, &ihost->smu_registers->interrupt_mask);
+
+ return false;
+}
+
+static void sci_controller_task_completion(struct isci_host *ihost, u32 ent)
+{
+ u32 index = SCU_GET_COMPLETION_INDEX(ent);
+ struct isci_request *ireq = ihost->reqs[index];
+
+ /* Make sure that we really want to process this IO request */
+ if (test_bit(IREQ_ACTIVE, &ireq->flags) &&
+ ireq->io_tag != SCI_CONTROLLER_INVALID_IO_TAG &&
+ ISCI_TAG_SEQ(ireq->io_tag) == ihost->io_request_sequence[index])
+ /* Yep this is a valid io request pass it along to the
+ * io request handler
+ */
+ sci_io_request_tc_completion(ireq, ent);
+}
+
+static void sci_controller_sdma_completion(struct isci_host *ihost, u32 ent)
+{
+ u32 index;
+ struct isci_request *ireq;
+ struct isci_remote_device *idev;
+
+ index = SCU_GET_COMPLETION_INDEX(ent);
+
+ switch (scu_get_command_request_type(ent)) {
+ case SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC:
+ case SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_TC:
+ ireq = ihost->reqs[index];
+ dev_warn(&ihost->pdev->dev, "%s: %x for io request %p\n",
+ __func__, ent, ireq);
+ /* @todo For a post TC operation we need to fail the IO
+ * request
+ */
+ break;
+ case SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_RNC:
+ case SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC:
+ case SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_RNC:
+ idev = ihost->device_table[index];
+ dev_warn(&ihost->pdev->dev, "%s: %x for device %p\n",
+ __func__, ent, idev);
+ /* @todo For a port RNC operation we need to fail the
+ * device
+ */
+ break;
+ default:
+ dev_warn(&ihost->pdev->dev, "%s: unknown completion type %x\n",
+ __func__, ent);
+ break;
+ }
+}
+
+static void sci_controller_unsolicited_frame(struct isci_host *ihost, u32 ent)
+{
+ u32 index;
+ u32 frame_index;
+
+ struct scu_unsolicited_frame_header *frame_header;
+ struct isci_phy *iphy;
+ struct isci_remote_device *idev;
+
+ enum sci_status result = SCI_FAILURE;
+
+ frame_index = SCU_GET_FRAME_INDEX(ent);
+
+ frame_header = ihost->uf_control.buffers.array[frame_index].header;
+ ihost->uf_control.buffers.array[frame_index].state = UNSOLICITED_FRAME_IN_USE;
+
+ if (SCU_GET_FRAME_ERROR(ent)) {
+ /*
+ * / @todo If the IAF frame or SIGNATURE FIS frame has an error will
+ * / this cause a problem? We expect the phy initialization will
+ * / fail if there is an error in the frame. */
+ sci_controller_release_frame(ihost, frame_index);
+ return;
+ }
+
+ if (frame_header->is_address_frame) {
+ index = SCU_GET_PROTOCOL_ENGINE_INDEX(ent);
+ iphy = &ihost->phys[index];
+ result = sci_phy_frame_handler(iphy, frame_index);
+ } else {
+
+ index = SCU_GET_COMPLETION_INDEX(ent);
+
+ if (index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) {
+ /*
+ * This is a signature fis or a frame from a direct attached SATA
+ * device that has not yet been created. In either case forwared
+ * the frame to the PE and let it take care of the frame data. */
+ index = SCU_GET_PROTOCOL_ENGINE_INDEX(ent);
+ iphy = &ihost->phys[index];
+ result = sci_phy_frame_handler(iphy, frame_index);
+ } else {
+ if (index < ihost->remote_node_entries)
+ idev = ihost->device_table[index];
+ else
+ idev = NULL;
+
+ if (idev != NULL)
+ result = sci_remote_device_frame_handler(idev, frame_index);
+ else
+ sci_controller_release_frame(ihost, frame_index);
+ }
+ }
+
+ if (result != SCI_SUCCESS) {
+ /*
+ * / @todo Is there any reason to report some additional error message
+ * / when we get this failure notifiction? */
+ }
+}
+
+static void sci_controller_event_completion(struct isci_host *ihost, u32 ent)
+{
+ struct isci_remote_device *idev;
+ struct isci_request *ireq;
+ struct isci_phy *iphy;
+ u32 index;
+
+ index = SCU_GET_COMPLETION_INDEX(ent);
+
+ switch (scu_get_event_type(ent)) {
+ case SCU_EVENT_TYPE_SMU_COMMAND_ERROR:
+ /* / @todo The driver did something wrong and we need to fix the condtion. */
+ dev_err(&ihost->pdev->dev,
+ "%s: SCIC Controller 0x%p received SMU command error "
+ "0x%x\n",
+ __func__,
+ ihost,
+ ent);
+ break;
+
+ case SCU_EVENT_TYPE_SMU_PCQ_ERROR:
+ case SCU_EVENT_TYPE_SMU_ERROR:
+ case SCU_EVENT_TYPE_FATAL_MEMORY_ERROR:
+ /*
+ * / @todo This is a hardware failure and its likely that we want to
+ * / reset the controller. */
+ dev_err(&ihost->pdev->dev,
+ "%s: SCIC Controller 0x%p received fatal controller "
+ "event 0x%x\n",
+ __func__,
+ ihost,
+ ent);
+ break;
+
+ case SCU_EVENT_TYPE_TRANSPORT_ERROR:
+ ireq = ihost->reqs[index];
+ sci_io_request_event_handler(ireq, ent);
+ break;
+
+ case SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT:
+ switch (scu_get_event_specifier(ent)) {
+ case SCU_EVENT_SPECIFIC_SMP_RESPONSE_NO_PE:
+ case SCU_EVENT_SPECIFIC_TASK_TIMEOUT:
+ ireq = ihost->reqs[index];
+ if (ireq != NULL)
+ sci_io_request_event_handler(ireq, ent);
+ else
+ dev_warn(&ihost->pdev->dev,
+ "%s: SCIC Controller 0x%p received "
+ "event 0x%x for io request object "
+ "that doesnt exist.\n",
+ __func__,
+ ihost,
+ ent);
+
+ break;
+
+ case SCU_EVENT_SPECIFIC_IT_NEXUS_TIMEOUT:
+ idev = ihost->device_table[index];
+ if (idev != NULL)
+ sci_remote_device_event_handler(idev, ent);
+ else
+ dev_warn(&ihost->pdev->dev,
+ "%s: SCIC Controller 0x%p received "
+ "event 0x%x for remote device object "
+ "that doesnt exist.\n",
+ __func__,
+ ihost,
+ ent);
+
+ break;
+ }
+ break;
+
+ case SCU_EVENT_TYPE_BROADCAST_CHANGE:
+ /*
+ * direct the broadcast change event to the phy first and then let
+ * the phy redirect the broadcast change to the port object */
+ case SCU_EVENT_TYPE_ERR_CNT_EVENT:
+ /*
+ * direct error counter event to the phy object since that is where
+ * we get the event notification. This is a type 4 event. */
+ case SCU_EVENT_TYPE_OSSP_EVENT:
+ index = SCU_GET_PROTOCOL_ENGINE_INDEX(ent);
+ iphy = &ihost->phys[index];
+ sci_phy_event_handler(iphy, ent);
+ break;
+
+ case SCU_EVENT_TYPE_RNC_SUSPEND_TX:
+ case SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX:
+ case SCU_EVENT_TYPE_RNC_OPS_MISC:
+ if (index < ihost->remote_node_entries) {
+ idev = ihost->device_table[index];
+
+ if (idev != NULL)
+ sci_remote_device_event_handler(idev, ent);
+ } else
+ dev_err(&ihost->pdev->dev,
+ "%s: SCIC Controller 0x%p received event 0x%x "
+ "for remote device object 0x%0x that doesnt "
+ "exist.\n",
+ __func__,
+ ihost,
+ ent,
+ index);
+
+ break;
+
+ default:
+ dev_warn(&ihost->pdev->dev,
+ "%s: SCIC Controller received unknown event code %x\n",
+ __func__,
+ ent);
+ break;
+ }
+}
+
+static void sci_controller_process_completions(struct isci_host *ihost)
+{
+ u32 completion_count = 0;
+ u32 ent;
+ u32 get_index;
+ u32 get_cycle;
+ u32 event_get;
+ u32 event_cycle;
+
+ dev_dbg(&ihost->pdev->dev,
+ "%s: completion queue beginning get:0x%08x\n",
+ __func__,
+ ihost->completion_queue_get);
+
+ /* Get the component parts of the completion queue */
+ get_index = NORMALIZE_GET_POINTER(ihost->completion_queue_get);
+ get_cycle = SMU_CQGR_CYCLE_BIT & ihost->completion_queue_get;
+
+ event_get = NORMALIZE_EVENT_POINTER(ihost->completion_queue_get);
+ event_cycle = SMU_CQGR_EVENT_CYCLE_BIT & ihost->completion_queue_get;
+
+ while (
+ NORMALIZE_GET_POINTER_CYCLE_BIT(get_cycle)
+ == COMPLETION_QUEUE_CYCLE_BIT(ihost->completion_queue[get_index])
+ ) {
+ completion_count++;
+
+ ent = ihost->completion_queue[get_index];
+
+ /* increment the get pointer and check for rollover to toggle the cycle bit */
+ get_cycle ^= ((get_index+1) & SCU_MAX_COMPLETION_QUEUE_ENTRIES) <<
+ (SMU_COMPLETION_QUEUE_GET_CYCLE_BIT_SHIFT - SCU_MAX_COMPLETION_QUEUE_SHIFT);
+ get_index = (get_index+1) & (SCU_MAX_COMPLETION_QUEUE_ENTRIES-1);
+
+ dev_dbg(&ihost->pdev->dev,
+ "%s: completion queue entry:0x%08x\n",
+ __func__,
+ ent);
+
+ switch (SCU_GET_COMPLETION_TYPE(ent)) {
+ case SCU_COMPLETION_TYPE_TASK:
+ sci_controller_task_completion(ihost, ent);
+ break;
+
+ case SCU_COMPLETION_TYPE_SDMA:
+ sci_controller_sdma_completion(ihost, ent);
+ break;
+
+ case SCU_COMPLETION_TYPE_UFI:
+ sci_controller_unsolicited_frame(ihost, ent);
+ break;
+
+ case SCU_COMPLETION_TYPE_EVENT:
+ sci_controller_event_completion(ihost, ent);
+ break;
+
+ case SCU_COMPLETION_TYPE_NOTIFY: {
+ event_cycle ^= ((event_get+1) & SCU_MAX_EVENTS) <<
+ (SMU_COMPLETION_QUEUE_GET_EVENT_CYCLE_BIT_SHIFT - SCU_MAX_EVENTS_SHIFT);
+ event_get = (event_get+1) & (SCU_MAX_EVENTS-1);
+
+ sci_controller_event_completion(ihost, ent);
+ break;
+ }
+ default:
+ dev_warn(&ihost->pdev->dev,
+ "%s: SCIC Controller received unknown "
+ "completion type %x\n",
+ __func__,
+ ent);
+ break;
+ }
+ }
+
+ /* Update the get register if we completed one or more entries */
+ if (completion_count > 0) {
+ ihost->completion_queue_get =
+ SMU_CQGR_GEN_BIT(ENABLE) |
+ SMU_CQGR_GEN_BIT(EVENT_ENABLE) |
+ event_cycle |
+ SMU_CQGR_GEN_VAL(EVENT_POINTER, event_get) |
+ get_cycle |
+ SMU_CQGR_GEN_VAL(POINTER, get_index);
+
+ writel(ihost->completion_queue_get,
+ &ihost->smu_registers->completion_queue_get);
+
+ }
+
+ dev_dbg(&ihost->pdev->dev,
+ "%s: completion queue ending get:0x%08x\n",
+ __func__,
+ ihost->completion_queue_get);
+
+}
+
+static void sci_controller_error_handler(struct isci_host *ihost)
+{
+ u32 interrupt_status;
+
+ interrupt_status =
+ readl(&ihost->smu_registers->interrupt_status);
+
+ if ((interrupt_status & SMU_ISR_QUEUE_SUSPEND) &&
+ sci_controller_completion_queue_has_entries(ihost)) {
+
+ sci_controller_process_completions(ihost);
+ writel(SMU_ISR_QUEUE_SUSPEND, &ihost->smu_registers->interrupt_status);
+ } else {
+ dev_err(&ihost->pdev->dev, "%s: status: %#x\n", __func__,
+ interrupt_status);
+
+ sci_change_state(&ihost->sm, SCIC_FAILED);
+
+ return;
+ }
+
+ /* If we dont process any completions I am not sure that we want to do this.
+ * We are in the middle of a hardware fault and should probably be reset.
+ */
+ writel(0, &ihost->smu_registers->interrupt_mask);
+}
+
+irqreturn_t isci_intx_isr(int vec, void *data)
+{
+ irqreturn_t ret = IRQ_NONE;
+ struct isci_host *ihost = data;
+
+ if (sci_controller_isr(ihost)) {
+ writel(SMU_ISR_COMPLETION, &ihost->smu_registers->interrupt_status);
+ tasklet_schedule(&ihost->completion_tasklet);
+ ret = IRQ_HANDLED;
+ } else if (sci_controller_error_isr(ihost)) {
+ spin_lock(&ihost->scic_lock);
+ sci_controller_error_handler(ihost);
+ spin_unlock(&ihost->scic_lock);
+ ret = IRQ_HANDLED;
+ }
+
+ return ret;
+}
+
+irqreturn_t isci_error_isr(int vec, void *data)
+{
+ struct isci_host *ihost = data;
+
+ if (sci_controller_error_isr(ihost))
+ sci_controller_error_handler(ihost);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * isci_host_start_complete() - This function is called by the core library,
+ * through the ISCI Module, to indicate controller start status.
+ * @isci_host: This parameter specifies the ISCI host object
+ * @completion_status: This parameter specifies the completion status from the
+ * core library.
+ *
+ */
+static void isci_host_start_complete(struct isci_host *ihost, enum sci_status completion_status)
+{
+ if (completion_status != SCI_SUCCESS)
+ dev_info(&ihost->pdev->dev,
+ "controller start timed out, continuing...\n");
+ clear_bit(IHOST_START_PENDING, &ihost->flags);
+ wake_up(&ihost->eventq);
+}
+
+int isci_host_scan_finished(struct Scsi_Host *shost, unsigned long time)
+{
+ struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost);
+ struct isci_host *ihost = ha->lldd_ha;
+
+ if (test_bit(IHOST_START_PENDING, &ihost->flags))
+ return 0;
+
+ sas_drain_work(ha);
+
+ return 1;
+}
+
+/**
+ * sci_controller_get_suggested_start_timeout() - This method returns the
+ * suggested sci_controller_start() timeout amount. The user is free to
+ * use any timeout value, but this method provides the suggested minimum
+ * start timeout value. The returned value is based upon empirical
+ * information determined as a result of interoperability testing.
+ * @controller: the handle to the controller object for which to return the
+ * suggested start timeout.
+ *
+ * This method returns the number of milliseconds for the suggested start
+ * operation timeout.
+ */
+static u32 sci_controller_get_suggested_start_timeout(struct isci_host *ihost)
+{
+ /* Validate the user supplied parameters. */
+ if (!ihost)
+ return 0;
+
+ /*
+ * The suggested minimum timeout value for a controller start operation:
+ *
+ * Signature FIS Timeout
+ * + Phy Start Timeout
+ * + Number of Phy Spin Up Intervals
+ * ---------------------------------
+ * Number of milliseconds for the controller start operation.
+ *
+ * NOTE: The number of phy spin up intervals will be equivalent
+ * to the number of phys divided by the number phys allowed
+ * per interval - 1 (once OEM parameters are supported).
+ * Currently we assume only 1 phy per interval. */
+
+ return SCIC_SDS_SIGNATURE_FIS_TIMEOUT
+ + SCIC_SDS_CONTROLLER_PHY_START_TIMEOUT
+ + ((SCI_MAX_PHYS - 1) * SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL);
+}
+
+static void sci_controller_enable_interrupts(struct isci_host *ihost)
+{
+ set_bit(IHOST_IRQ_ENABLED, &ihost->flags);
+ writel(0, &ihost->smu_registers->interrupt_mask);
+}
+
+void sci_controller_disable_interrupts(struct isci_host *ihost)
+{
+ clear_bit(IHOST_IRQ_ENABLED, &ihost->flags);
+ writel(0xffffffff, &ihost->smu_registers->interrupt_mask);
+ readl(&ihost->smu_registers->interrupt_mask); /* flush */
+}
+
+static void sci_controller_enable_port_task_scheduler(struct isci_host *ihost)
+{
+ u32 port_task_scheduler_value;
+
+ port_task_scheduler_value =
+ readl(&ihost->scu_registers->peg0.ptsg.control);
+ port_task_scheduler_value |=
+ (SCU_PTSGCR_GEN_BIT(ETM_ENABLE) |
+ SCU_PTSGCR_GEN_BIT(PTSG_ENABLE));
+ writel(port_task_scheduler_value,
+ &ihost->scu_registers->peg0.ptsg.control);
+}
+
+static void sci_controller_assign_task_entries(struct isci_host *ihost)
+{
+ u32 task_assignment;
+
+ /*
+ * Assign all the TCs to function 0
+ * TODO: Do we actually need to read this register to write it back?
+ */
+
+ task_assignment =
+ readl(&ihost->smu_registers->task_context_assignment[0]);
+
+ task_assignment |= (SMU_TCA_GEN_VAL(STARTING, 0)) |
+ (SMU_TCA_GEN_VAL(ENDING, ihost->task_context_entries - 1)) |
+ (SMU_TCA_GEN_BIT(RANGE_CHECK_ENABLE));
+
+ writel(task_assignment,
+ &ihost->smu_registers->task_context_assignment[0]);
+
+}
+
+static void sci_controller_initialize_completion_queue(struct isci_host *ihost)
+{
+ u32 index;
+ u32 completion_queue_control_value;
+ u32 completion_queue_get_value;
+ u32 completion_queue_put_value;
+
+ ihost->completion_queue_get = 0;
+
+ completion_queue_control_value =
+ (SMU_CQC_QUEUE_LIMIT_SET(SCU_MAX_COMPLETION_QUEUE_ENTRIES - 1) |
+ SMU_CQC_EVENT_LIMIT_SET(SCU_MAX_EVENTS - 1));
+
+ writel(completion_queue_control_value,
+ &ihost->smu_registers->completion_queue_control);
+
+
+ /* Set the completion queue get pointer and enable the queue */
+ completion_queue_get_value = (
+ (SMU_CQGR_GEN_VAL(POINTER, 0))
+ | (SMU_CQGR_GEN_VAL(EVENT_POINTER, 0))
+ | (SMU_CQGR_GEN_BIT(ENABLE))
+ | (SMU_CQGR_GEN_BIT(EVENT_ENABLE))
+ );
+
+ writel(completion_queue_get_value,
+ &ihost->smu_registers->completion_queue_get);
+
+ /* Set the completion queue put pointer */
+ completion_queue_put_value = (
+ (SMU_CQPR_GEN_VAL(POINTER, 0))
+ | (SMU_CQPR_GEN_VAL(EVENT_POINTER, 0))
+ );
+
+ writel(completion_queue_put_value,
+ &ihost->smu_registers->completion_queue_put);
+
+ /* Initialize the cycle bit of the completion queue entries */
+ for (index = 0; index < SCU_MAX_COMPLETION_QUEUE_ENTRIES; index++) {
+ /*
+ * If get.cycle_bit != completion_queue.cycle_bit
+ * its not a valid completion queue entry
+ * so at system start all entries are invalid */
+ ihost->completion_queue[index] = 0x80000000;
+ }
+}
+
+static void sci_controller_initialize_unsolicited_frame_queue(struct isci_host *ihost)
+{
+ u32 frame_queue_control_value;
+ u32 frame_queue_get_value;
+ u32 frame_queue_put_value;
+
+ /* Write the queue size */
+ frame_queue_control_value =
+ SCU_UFQC_GEN_VAL(QUEUE_SIZE, SCU_MAX_UNSOLICITED_FRAMES);
+
+ writel(frame_queue_control_value,
+ &ihost->scu_registers->sdma.unsolicited_frame_queue_control);
+
+ /* Setup the get pointer for the unsolicited frame queue */
+ frame_queue_get_value = (
+ SCU_UFQGP_GEN_VAL(POINTER, 0)
+ | SCU_UFQGP_GEN_BIT(ENABLE_BIT)
+ );
+
+ writel(frame_queue_get_value,
+ &ihost->scu_registers->sdma.unsolicited_frame_get_pointer);
+ /* Setup the put pointer for the unsolicited frame queue */
+ frame_queue_put_value = SCU_UFQPP_GEN_VAL(POINTER, 0);
+ writel(frame_queue_put_value,
+ &ihost->scu_registers->sdma.unsolicited_frame_put_pointer);
+}
+
+void sci_controller_transition_to_ready(struct isci_host *ihost, enum sci_status status)
+{
+ if (ihost->sm.current_state_id == SCIC_STARTING) {
+ /*
+ * We move into the ready state, because some of the phys/ports
+ * may be up and operational.
+ */
+ sci_change_state(&ihost->sm, SCIC_READY);
+
+ isci_host_start_complete(ihost, status);
+ }
+}
+
+static bool is_phy_starting(struct isci_phy *iphy)
+{
+ enum sci_phy_states state;
+
+ state = iphy->sm.current_state_id;
+ switch (state) {
+ case SCI_PHY_STARTING:
+ case SCI_PHY_SUB_INITIAL:
+ case SCI_PHY_SUB_AWAIT_SAS_SPEED_EN:
+ case SCI_PHY_SUB_AWAIT_IAF_UF:
+ case SCI_PHY_SUB_AWAIT_SAS_POWER:
+ case SCI_PHY_SUB_AWAIT_SATA_POWER:
+ case SCI_PHY_SUB_AWAIT_SATA_PHY_EN:
+ case SCI_PHY_SUB_AWAIT_SATA_SPEED_EN:
+ case SCI_PHY_SUB_AWAIT_OSSP_EN:
+ case SCI_PHY_SUB_AWAIT_SIG_FIS_UF:
+ case SCI_PHY_SUB_FINAL:
+ return true;
+ default:
+ return false;
+ }
+}
+
+bool is_controller_start_complete(struct isci_host *ihost)
+{
+ int i;
+
+ for (i = 0; i < SCI_MAX_PHYS; i++) {
+ struct isci_phy *iphy = &ihost->phys[i];
+ u32 state = iphy->sm.current_state_id;
+
+ /* in apc mode we need to check every phy, in
+ * mpc mode we only need to check phys that have
+ * been configured into a port
+ */
+ if (is_port_config_apc(ihost))
+ /* pass */;
+ else if (!phy_get_non_dummy_port(iphy))
+ continue;
+
+ /* The controller start operation is complete iff:
+ * - all links have been given an opportunity to start
+ * - have no indication of a connected device
+ * - have an indication of a connected device and it has
+ * finished the link training process.
+ */
+ if ((iphy->is_in_link_training == false && state == SCI_PHY_INITIAL) ||
+ (iphy->is_in_link_training == false && state == SCI_PHY_STOPPED) ||
+ (iphy->is_in_link_training == true && is_phy_starting(iphy)) ||
+ (ihost->port_agent.phy_ready_mask != ihost->port_agent.phy_configured_mask))
+ return false;
+ }
+
+ return true;
+}
+
+/**
+ * sci_controller_start_next_phy - start phy
+ * @scic: controller
+ *
+ * If all the phys have been started, then attempt to transition the
+ * controller to the READY state and inform the user
+ * (sci_cb_controller_start_complete()).
+ */
+static enum sci_status sci_controller_start_next_phy(struct isci_host *ihost)
+{
+ struct sci_oem_params *oem = &ihost->oem_parameters;
+ struct isci_phy *iphy;
+ enum sci_status status;
+
+ status = SCI_SUCCESS;
+
+ if (ihost->phy_startup_timer_pending)
+ return status;
+
+ if (ihost->next_phy_to_start >= SCI_MAX_PHYS) {
+ if (is_controller_start_complete(ihost)) {
+ sci_controller_transition_to_ready(ihost, SCI_SUCCESS);
+ sci_del_timer(&ihost->phy_timer);
+ ihost->phy_startup_timer_pending = false;
+ }
+ } else {
+ iphy = &ihost->phys[ihost->next_phy_to_start];
+
+ if (oem->controller.mode_type == SCIC_PORT_MANUAL_CONFIGURATION_MODE) {
+ if (phy_get_non_dummy_port(iphy) == NULL) {
+ ihost->next_phy_to_start++;
+
+ /* Caution recursion ahead be forwarned
+ *
+ * The PHY was never added to a PORT in MPC mode
+ * so start the next phy in sequence This phy
+ * will never go link up and will not draw power
+ * the OEM parameters either configured the phy
+ * incorrectly for the PORT or it was never
+ * assigned to a PORT
+ */
+ return sci_controller_start_next_phy(ihost);
+ }
+ }
+
+ status = sci_phy_start(iphy);
+
+ if (status == SCI_SUCCESS) {
+ sci_mod_timer(&ihost->phy_timer,
+ SCIC_SDS_CONTROLLER_PHY_START_TIMEOUT);
+ ihost->phy_startup_timer_pending = true;
+ } else {
+ dev_warn(&ihost->pdev->dev,
+ "%s: Controller stop operation failed "
+ "to stop phy %d because of status "
+ "%d.\n",
+ __func__,
+ ihost->phys[ihost->next_phy_to_start].phy_index,
+ status);
+ }
+
+ ihost->next_phy_to_start++;
+ }
+
+ return status;
+}
+
+static void phy_startup_timeout(unsigned long data)
+{
+ struct sci_timer *tmr = (struct sci_timer *)data;
+ struct isci_host *ihost = container_of(tmr, typeof(*ihost), phy_timer);
+ unsigned long flags;
+ enum sci_status status;
+
+ spin_lock_irqsave(&ihost->scic_lock, flags);
+
+ if (tmr->cancel)
+ goto done;
+
+ ihost->phy_startup_timer_pending = false;
+
+ do {
+ status = sci_controller_start_next_phy(ihost);
+ } while (status != SCI_SUCCESS);
+
+done:
+ spin_unlock_irqrestore(&ihost->scic_lock, flags);
+}
+
+static u16 isci_tci_active(struct isci_host *ihost)
+{
+ return CIRC_CNT(ihost->tci_head, ihost->tci_tail, SCI_MAX_IO_REQUESTS);
+}
+
+static enum sci_status sci_controller_start(struct isci_host *ihost,
+ u32 timeout)
+{
+ enum sci_status result;
+ u16 index;
+
+ if (ihost->sm.current_state_id != SCIC_INITIALIZED) {
+ dev_warn(&ihost->pdev->dev, "%s invalid state: %d\n",
+ __func__, ihost->sm.current_state_id);
+ return SCI_FAILURE_INVALID_STATE;
+ }
+
+ /* Build the TCi free pool */
+ BUILD_BUG_ON(SCI_MAX_IO_REQUESTS > 1 << sizeof(ihost->tci_pool[0]) * 8);
+ ihost->tci_head = 0;
+ ihost->tci_tail = 0;
+ for (index = 0; index < ihost->task_context_entries; index++)
+ isci_tci_free(ihost, index);
+
+ /* Build the RNi free pool */
+ sci_remote_node_table_initialize(&ihost->available_remote_nodes,
+ ihost->remote_node_entries);
+
+ /*
+ * Before anything else lets make sure we will not be
+ * interrupted by the hardware.
+ */
+ sci_controller_disable_interrupts(ihost);
+
+ /* Enable the port task scheduler */
+ sci_controller_enable_port_task_scheduler(ihost);
+
+ /* Assign all the task entries to ihost physical function */
+ sci_controller_assign_task_entries(ihost);
+
+ /* Now initialize the completion queue */
+ sci_controller_initialize_completion_queue(ihost);
+
+ /* Initialize the unsolicited frame queue for use */
+ sci_controller_initialize_unsolicited_frame_queue(ihost);
+
+ /* Start all of the ports on this controller */
+ for (index = 0; index < ihost->logical_port_entries; index++) {
+ struct isci_port *iport = &ihost->ports[index];
+
+ result = sci_port_start(iport);
+ if (result)
+ return result;
+ }
+
+ sci_controller_start_next_phy(ihost);
+
+ sci_mod_timer(&ihost->timer, timeout);
+
+ sci_change_state(&ihost->sm, SCIC_STARTING);
+
+ return SCI_SUCCESS;
+}
+
+void isci_host_start(struct Scsi_Host *shost)
+{
+ struct isci_host *ihost = SHOST_TO_SAS_HA(shost)->lldd_ha;
+ unsigned long tmo = sci_controller_get_suggested_start_timeout(ihost);
+
+ set_bit(IHOST_START_PENDING, &ihost->flags);
+
+ spin_lock_irq(&ihost->scic_lock);
+ sci_controller_start(ihost, tmo);
+ sci_controller_enable_interrupts(ihost);
+ spin_unlock_irq(&ihost->scic_lock);
+}
+
+static void isci_host_stop_complete(struct isci_host *ihost)
+{
+ sci_controller_disable_interrupts(ihost);
+ clear_bit(IHOST_STOP_PENDING, &ihost->flags);
+ wake_up(&ihost->eventq);
+}
+
+static void sci_controller_completion_handler(struct isci_host *ihost)
+{
+ /* Empty out the completion queue */
+ if (sci_controller_completion_queue_has_entries(ihost))
+ sci_controller_process_completions(ihost);
+
+ /* Clear the interrupt and enable all interrupts again */
+ writel(SMU_ISR_COMPLETION, &ihost->smu_registers->interrupt_status);
+ /* Could we write the value of SMU_ISR_COMPLETION? */
+ writel(0xFF000000, &ihost->smu_registers->interrupt_mask);
+ writel(0, &ihost->smu_registers->interrupt_mask);
+}
+
+void ireq_done(struct isci_host *ihost, struct isci_request *ireq, struct sas_task *task)
+{
+ if (!test_bit(IREQ_ABORT_PATH_ACTIVE, &ireq->flags) &&
+ !(task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
+ if (test_bit(IREQ_COMPLETE_IN_TARGET, &ireq->flags)) {
+ /* Normal notification (task_done) */
+ dev_dbg(&ihost->pdev->dev,
+ "%s: Normal - ireq/task = %p/%p\n",
+ __func__, ireq, task);
+ task->lldd_task = NULL;
+ task->task_done(task);
+ } else {
+ dev_dbg(&ihost->pdev->dev,
+ "%s: Error - ireq/task = %p/%p\n",
+ __func__, ireq, task);
+ if (sas_protocol_ata(task->task_proto))
+ task->lldd_task = NULL;
+ sas_task_abort(task);
+ }
+ } else
+ task->lldd_task = NULL;
+
+ if (test_and_clear_bit(IREQ_ABORT_PATH_ACTIVE, &ireq->flags))
+ wake_up_all(&ihost->eventq);
+
+ if (!test_bit(IREQ_NO_AUTO_FREE_TAG, &ireq->flags))
+ isci_free_tag(ihost, ireq->io_tag);
+}
+/**
+ * isci_host_completion_routine() - This function is the delayed service
+ * routine that calls the sci core library's completion handler. It's
+ * scheduled as a tasklet from the interrupt service routine when interrupts
+ * in use, or set as the timeout function in polled mode.
+ * @data: This parameter specifies the ISCI host object
+ *
+ */
+void isci_host_completion_routine(unsigned long data)
+{
+ struct isci_host *ihost = (struct isci_host *)data;
+ u16 active;
+
+ spin_lock_irq(&ihost->scic_lock);
+ sci_controller_completion_handler(ihost);
+ spin_unlock_irq(&ihost->scic_lock);
+
+ /*
+ * we subtract SCI_MAX_PORTS to account for the number of dummy TCs
+ * issued for hardware issue workaround
+ */
+ active = isci_tci_active(ihost) - SCI_MAX_PORTS;
+
+ /*
+ * the coalesence timeout doubles at each encoding step, so
+ * update it based on the ilog2 value of the outstanding requests
+ */
+ writel(SMU_ICC_GEN_VAL(NUMBER, active) |
+ SMU_ICC_GEN_VAL(TIMER, ISCI_COALESCE_BASE + ilog2(active)),
+ &ihost->smu_registers->interrupt_coalesce_control);
+}
+
+/**
+ * sci_controller_stop() - This method will stop an individual controller
+ * object.This method will invoke the associated user callback upon
+ * completion. The completion callback is called when the following
+ * conditions are met: -# the method return status is SCI_SUCCESS. -# the
+ * controller has been quiesced. This method will ensure that all IO
+ * requests are quiesced, phys are stopped, and all additional operation by
+ * the hardware is halted.
+ * @controller: the handle to the controller object to stop.
+ * @timeout: This parameter specifies the number of milliseconds in which the
+ * stop operation should complete.
+ *
+ * The controller must be in the STARTED or STOPPED state. Indicate if the
+ * controller stop method succeeded or failed in some way. SCI_SUCCESS if the
+ * stop operation successfully began. SCI_WARNING_ALREADY_IN_STATE if the
+ * controller is already in the STOPPED state. SCI_FAILURE_INVALID_STATE if the
+ * controller is not either in the STARTED or STOPPED states.
+ */
+static enum sci_status sci_controller_stop(struct isci_host *ihost, u32 timeout)
+{
+ if (ihost->sm.current_state_id != SCIC_READY) {
+ dev_warn(&ihost->pdev->dev, "%s invalid state: %d\n",
+ __func__, ihost->sm.current_state_id);
+ return SCI_FAILURE_INVALID_STATE;
+ }
+
+ sci_mod_timer(&ihost->timer, timeout);
+ sci_change_state(&ihost->sm, SCIC_STOPPING);
+ return SCI_SUCCESS;
+}
+
+/**
+ * sci_controller_reset() - This method will reset the supplied core
+ * controller regardless of the state of said controller. This operation is
+ * considered destructive. In other words, all current operations are wiped
+ * out. No IO completions for outstanding devices occur. Outstanding IO
+ * requests are not aborted or completed at the actual remote device.
+ * @controller: the handle to the controller object to reset.
+ *
+ * Indicate if the controller reset method succeeded or failed in some way.
+ * SCI_SUCCESS if the reset operation successfully started. SCI_FATAL_ERROR if
+ * the controller reset operation is unable to complete.
+ */
+static enum sci_status sci_controller_reset(struct isci_host *ihost)
+{
+ switch (ihost->sm.current_state_id) {
+ case SCIC_RESET:
+ case SCIC_READY:
+ case SCIC_STOPPING:
+ case SCIC_FAILED:
+ /*
+ * The reset operation is not a graceful cleanup, just
+ * perform the state transition.
+ */
+ sci_change_state(&ihost->sm, SCIC_RESETTING);
+ return SCI_SUCCESS;
+ default:
+ dev_warn(&ihost->pdev->dev, "%s invalid state: %d\n",
+ __func__, ihost->sm.current_state_id);
+ return SCI_FAILURE_INVALID_STATE;
+ }
+}
+
+static enum sci_status sci_controller_stop_phys(struct isci_host *ihost)
+{
+ u32 index;
+ enum sci_status status;
+ enum sci_status phy_status;
+
+ status = SCI_SUCCESS;
+
+ for (index = 0; index < SCI_MAX_PHYS; index++) {
+ phy_status = sci_phy_stop(&ihost->phys[index]);
+
+ if (phy_status != SCI_SUCCESS &&
+ phy_status != SCI_FAILURE_INVALID_STATE) {
+ status = SCI_FAILURE;
+
+ dev_warn(&ihost->pdev->dev,
+ "%s: Controller stop operation failed to stop "
+ "phy %d because of status %d.\n",
+ __func__,
+ ihost->phys[index].phy_index, phy_status);
+ }
+ }
+
+ return status;
+}
+
+
+/**
+ * isci_host_deinit - shutdown frame reception and dma
+ * @ihost: host to take down
+ *
+ * This is called in either the driver shutdown or the suspend path. In
+ * the shutdown case libsas went through port teardown and normal device
+ * removal (i.e. physical links stayed up to service scsi_device removal
+ * commands). In the suspend case we disable the hardware without
+ * notifying libsas of the link down events since we want libsas to
+ * remember the domain across the suspend/resume cycle
+ */
+void isci_host_deinit(struct isci_host *ihost)
+{
+ int i;
+
+ /* disable output data selects */
+ for (i = 0; i < isci_gpio_count(ihost); i++)
+ writel(SGPIO_HW_CONTROL, &ihost->scu_registers->peg0.sgpio.output_data_select[i]);
+
+ set_bit(IHOST_STOP_PENDING, &ihost->flags);
+
+ spin_lock_irq(&ihost->scic_lock);
+ sci_controller_stop(ihost, SCIC_CONTROLLER_STOP_TIMEOUT);
+ spin_unlock_irq(&ihost->scic_lock);
+
+ wait_for_stop(ihost);
+
+ /* phy stop is after controller stop to allow port and device to
+ * go idle before shutting down the phys, but the expectation is
+ * that i/o has been shut off well before we reach this
+ * function.
+ */
+ sci_controller_stop_phys(ihost);
+
+ /* disable sgpio: where the above wait should give time for the
+ * enclosure to sample the gpios going inactive
+ */
+ writel(0, &ihost->scu_registers->peg0.sgpio.interface_control);
+
+ spin_lock_irq(&ihost->scic_lock);
+ sci_controller_reset(ihost);
+ spin_unlock_irq(&ihost->scic_lock);
+
+ /* Cancel any/all outstanding port timers */
+ for (i = 0; i < ihost->logical_port_entries; i++) {
+ struct isci_port *iport = &ihost->ports[i];
+ del_timer_sync(&iport->timer.timer);
+ }
+
+ /* Cancel any/all outstanding phy timers */
+ for (i = 0; i < SCI_MAX_PHYS; i++) {
+ struct isci_phy *iphy = &ihost->phys[i];
+ del_timer_sync(&iphy->sata_timer.timer);
+ }
+
+ del_timer_sync(&ihost->port_agent.timer.timer);
+
+ del_timer_sync(&ihost->power_control.timer.timer);
+
+ del_timer_sync(&ihost->timer.timer);
+
+ del_timer_sync(&ihost->phy_timer.timer);
+}
+
+static void __iomem *scu_base(struct isci_host *isci_host)
+{
+ struct pci_dev *pdev = isci_host->pdev;
+ int id = isci_host->id;
+
+ return pcim_iomap_table(pdev)[SCI_SCU_BAR * 2] + SCI_SCU_BAR_SIZE * id;
+}
+
+static void __iomem *smu_base(struct isci_host *isci_host)
+{
+ struct pci_dev *pdev = isci_host->pdev;
+ int id = isci_host->id;
+
+ return pcim_iomap_table(pdev)[SCI_SMU_BAR * 2] + SCI_SMU_BAR_SIZE * id;
+}
+
+static void sci_controller_initial_state_enter(struct sci_base_state_machine *sm)
+{
+ struct isci_host *ihost = container_of(sm, typeof(*ihost), sm);
+
+ sci_change_state(&ihost->sm, SCIC_RESET);
+}
+
+static inline void sci_controller_starting_state_exit(struct sci_base_state_machine *sm)
+{
+ struct isci_host *ihost = container_of(sm, typeof(*ihost), sm);
+
+ sci_del_timer(&ihost->timer);
+}
+
+#define INTERRUPT_COALESCE_TIMEOUT_BASE_RANGE_LOWER_BOUND_NS 853
+#define INTERRUPT_COALESCE_TIMEOUT_BASE_RANGE_UPPER_BOUND_NS 1280
+#define INTERRUPT_COALESCE_TIMEOUT_MAX_US 2700000
+#define INTERRUPT_COALESCE_NUMBER_MAX 256
+#define INTERRUPT_COALESCE_TIMEOUT_ENCODE_MIN 7
+#define INTERRUPT_COALESCE_TIMEOUT_ENCODE_MAX 28
+
+/**
+ * sci_controller_set_interrupt_coalescence() - This method allows the user to
+ * configure the interrupt coalescence.
+ * @controller: This parameter represents the handle to the controller object
+ * for which its interrupt coalesce register is overridden.
+ * @coalesce_number: Used to control the number of entries in the Completion
+ * Queue before an interrupt is generated. If the number of entries exceed
+ * this number, an interrupt will be generated. The valid range of the input
+ * is [0, 256]. A setting of 0 results in coalescing being disabled.
+ * @coalesce_timeout: Timeout value in microseconds. The valid range of the
+ * input is [0, 2700000] . A setting of 0 is allowed and results in no
+ * interrupt coalescing timeout.
+ *
+ * Indicate if the user successfully set the interrupt coalesce parameters.
+ * SCI_SUCCESS The user successfully updated the interrutp coalescence.
+ * SCI_FAILURE_INVALID_PARAMETER_VALUE The user input value is out of range.
+ */
+static enum sci_status
+sci_controller_set_interrupt_coalescence(struct isci_host *ihost,
+ u32 coalesce_number,
+ u32 coalesce_timeout)
+{
+ u8 timeout_encode = 0;
+ u32 min = 0;
+ u32 max = 0;
+
+ /* Check if the input parameters fall in the range. */
+ if (coalesce_number > INTERRUPT_COALESCE_NUMBER_MAX)
+ return SCI_FAILURE_INVALID_PARAMETER_VALUE;
+
+ /*
+ * Defined encoding for interrupt coalescing timeout:
+ * Value Min Max Units
+ * ----- --- --- -----
+ * 0 - - Disabled
+ * 1 13.3 20.0 ns
+ * 2 26.7 40.0
+ * 3 53.3 80.0
+ * 4 106.7 160.0
+ * 5 213.3 320.0
+ * 6 426.7 640.0
+ * 7 853.3 1280.0
+ * 8 1.7 2.6 us
+ * 9 3.4 5.1
+ * 10 6.8 10.2
+ * 11 13.7 20.5
+ * 12 27.3 41.0
+ * 13 54.6 81.9
+ * 14 109.2 163.8
+ * 15 218.5 327.7
+ * 16 436.9 655.4
+ * 17 873.8 1310.7
+ * 18 1.7 2.6 ms
+ * 19 3.5 5.2
+ * 20 7.0 10.5
+ * 21 14.0 21.0
+ * 22 28.0 41.9
+ * 23 55.9 83.9
+ * 24 111.8 167.8
+ * 25 223.7 335.5
+ * 26 447.4 671.1
+ * 27 894.8 1342.2
+ * 28 1.8 2.7 s
+ * Others Undefined */
+
+ /*
+ * Use the table above to decide the encode of interrupt coalescing timeout
+ * value for register writing. */
+ if (coalesce_timeout == 0)
+ timeout_encode = 0;
+ else{
+ /* make the timeout value in unit of (10 ns). */
+ coalesce_timeout = coalesce_timeout * 100;
+ min = INTERRUPT_COALESCE_TIMEOUT_BASE_RANGE_LOWER_BOUND_NS / 10;
+ max = INTERRUPT_COALESCE_TIMEOUT_BASE_RANGE_UPPER_BOUND_NS / 10;
+
+ /* get the encode of timeout for register writing. */
+ for (timeout_encode = INTERRUPT_COALESCE_TIMEOUT_ENCODE_MIN;
+ timeout_encode <= INTERRUPT_COALESCE_TIMEOUT_ENCODE_MAX;
+ timeout_encode++) {
+ if (min <= coalesce_timeout && max > coalesce_timeout)
+ break;
+ else if (coalesce_timeout >= max && coalesce_timeout < min * 2
+ && coalesce_timeout <= INTERRUPT_COALESCE_TIMEOUT_MAX_US * 100) {
+ if ((coalesce_timeout - max) < (2 * min - coalesce_timeout))
+ break;
+ else{
+ timeout_encode++;
+ break;
+ }
+ } else {
+ max = max * 2;
+ min = min * 2;
+ }
+ }
+
+ if (timeout_encode == INTERRUPT_COALESCE_TIMEOUT_ENCODE_MAX + 1)
+ /* the value is out of range. */
+ return SCI_FAILURE_INVALID_PARAMETER_VALUE;
+ }
+
+ writel(SMU_ICC_GEN_VAL(NUMBER, coalesce_number) |
+ SMU_ICC_GEN_VAL(TIMER, timeout_encode),
+ &ihost->smu_registers->interrupt_coalesce_control);
+
+
+ ihost->interrupt_coalesce_number = (u16)coalesce_number;
+ ihost->interrupt_coalesce_timeout = coalesce_timeout / 100;
+
+ return SCI_SUCCESS;
+}
+
+
+static void sci_controller_ready_state_enter(struct sci_base_state_machine *sm)
+{
+ struct isci_host *ihost = container_of(sm, typeof(*ihost), sm);
+ u32 val;
+
+ /* enable clock gating for power control of the scu unit */
+ val = readl(&ihost->smu_registers->clock_gating_control);
+ val &= ~(SMU_CGUCR_GEN_BIT(REGCLK_ENABLE) |
+ SMU_CGUCR_GEN_BIT(TXCLK_ENABLE) |
+ SMU_CGUCR_GEN_BIT(XCLK_ENABLE));
+ val |= SMU_CGUCR_GEN_BIT(IDLE_ENABLE);
+ writel(val, &ihost->smu_registers->clock_gating_control);
+
+ /* set the default interrupt coalescence number and timeout value. */
+ sci_controller_set_interrupt_coalescence(ihost, 0, 0);
+}
+
+static void sci_controller_ready_state_exit(struct sci_base_state_machine *sm)
+{
+ struct isci_host *ihost = container_of(sm, typeof(*ihost), sm);
+
+ /* disable interrupt coalescence. */
+ sci_controller_set_interrupt_coalescence(ihost, 0, 0);
+}
+
+static enum sci_status sci_controller_stop_ports(struct isci_host *ihost)
+{
+ u32 index;
+ enum sci_status port_status;
+ enum sci_status status = SCI_SUCCESS;
+
+ for (index = 0; index < ihost->logical_port_entries; index++) {
+ struct isci_port *iport = &ihost->ports[index];
+
+ port_status = sci_port_stop(iport);
+
+ if ((port_status != SCI_SUCCESS) &&
+ (port_status != SCI_FAILURE_INVALID_STATE)) {
+ status = SCI_FAILURE;
+
+ dev_warn(&ihost->pdev->dev,
+ "%s: Controller stop operation failed to "
+ "stop port %d because of status %d.\n",
+ __func__,
+ iport->logical_port_index,
+ port_status);
+ }
+ }
+
+ return status;
+}
+
+static enum sci_status sci_controller_stop_devices(struct isci_host *ihost)
+{
+ u32 index;
+ enum sci_status status;
+ enum sci_status device_status;
+
+ status = SCI_SUCCESS;
+
+ for (index = 0; index < ihost->remote_node_entries; index++) {
+ if (ihost->device_table[index] != NULL) {
+ /* / @todo What timeout value do we want to provide to this request? */
+ device_status = sci_remote_device_stop(ihost->device_table[index], 0);
+
+ if ((device_status != SCI_SUCCESS) &&
+ (device_status != SCI_FAILURE_INVALID_STATE)) {
+ dev_warn(&ihost->pdev->dev,
+ "%s: Controller stop operation failed "
+ "to stop device 0x%p because of "
+ "status %d.\n",
+ __func__,
+ ihost->device_table[index], device_status);
+ }
+ }
+ }
+
+ return status;
+}
+
+static void sci_controller_stopping_state_enter(struct sci_base_state_machine *sm)
+{
+ struct isci_host *ihost = container_of(sm, typeof(*ihost), sm);
+
+ sci_controller_stop_devices(ihost);
+ sci_controller_stop_ports(ihost);
+
+ if (!sci_controller_has_remote_devices_stopping(ihost))
+ isci_host_stop_complete(ihost);
+}
+
+static void sci_controller_stopping_state_exit(struct sci_base_state_machine *sm)
+{
+ struct isci_host *ihost = container_of(sm, typeof(*ihost), sm);
+
+ sci_del_timer(&ihost->timer);
+}
+
+static void sci_controller_reset_hardware(struct isci_host *ihost)
+{
+ /* Disable interrupts so we dont take any spurious interrupts */
+ sci_controller_disable_interrupts(ihost);
+
+ /* Reset the SCU */
+ writel(0xFFFFFFFF, &ihost->smu_registers->soft_reset_control);
+
+ /* Delay for 1ms to before clearing the CQP and UFQPR. */
+ udelay(1000);
+
+ /* The write to the CQGR clears the CQP */
+ writel(0x00000000, &ihost->smu_registers->completion_queue_get);
+
+ /* The write to the UFQGP clears the UFQPR */
+ writel(0, &ihost->scu_registers->sdma.unsolicited_frame_get_pointer);
+
+ /* clear all interrupts */
+ writel(~SMU_INTERRUPT_STATUS_RESERVED_MASK, &ihost->smu_registers->interrupt_status);
+}
+
+static void sci_controller_resetting_state_enter(struct sci_base_state_machine *sm)
+{
+ struct isci_host *ihost = container_of(sm, typeof(*ihost), sm);
+
+ sci_controller_reset_hardware(ihost);
+ sci_change_state(&ihost->sm, SCIC_RESET);
+}
+
+static const struct sci_base_state sci_controller_state_table[] = {
+ [SCIC_INITIAL] = {
+ .enter_state = sci_controller_initial_state_enter,
+ },
+ [SCIC_RESET] = {},
+ [SCIC_INITIALIZING] = {},
+ [SCIC_INITIALIZED] = {},
+ [SCIC_STARTING] = {
+ .exit_state = sci_controller_starting_state_exit,
+ },
+ [SCIC_READY] = {
+ .enter_state = sci_controller_ready_state_enter,
+ .exit_state = sci_controller_ready_state_exit,
+ },
+ [SCIC_RESETTING] = {
+ .enter_state = sci_controller_resetting_state_enter,
+ },
+ [SCIC_STOPPING] = {
+ .enter_state = sci_controller_stopping_state_enter,
+ .exit_state = sci_controller_stopping_state_exit,
+ },
+ [SCIC_FAILED] = {}
+};
+
+static void controller_timeout(unsigned long data)
+{
+ struct sci_timer *tmr = (struct sci_timer *)data;
+ struct isci_host *ihost = container_of(tmr, typeof(*ihost), timer);
+ struct sci_base_state_machine *sm = &ihost->sm;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ihost->scic_lock, flags);
+
+ if (tmr->cancel)
+ goto done;
+
+ if (sm->current_state_id == SCIC_STARTING)
+ sci_controller_transition_to_ready(ihost, SCI_FAILURE_TIMEOUT);
+ else if (sm->current_state_id == SCIC_STOPPING) {
+ sci_change_state(sm, SCIC_FAILED);
+ isci_host_stop_complete(ihost);
+ } else /* / @todo Now what do we want to do in this case? */
+ dev_err(&ihost->pdev->dev,
+ "%s: Controller timer fired when controller was not "
+ "in a state being timed.\n",
+ __func__);
+
+done:
+ spin_unlock_irqrestore(&ihost->scic_lock, flags);
+}
+
+static enum sci_status sci_controller_construct(struct isci_host *ihost,
+ void __iomem *scu_base,
+ void __iomem *smu_base)
+{
+ u8 i;
+
+ sci_init_sm(&ihost->sm, sci_controller_state_table, SCIC_INITIAL);
+
+ ihost->scu_registers = scu_base;
+ ihost->smu_registers = smu_base;
+
+ sci_port_configuration_agent_construct(&ihost->port_agent);
+
+ /* Construct the ports for this controller */
+ for (i = 0; i < SCI_MAX_PORTS; i++)
+ sci_port_construct(&ihost->ports[i], i, ihost);
+ sci_port_construct(&ihost->ports[i], SCIC_SDS_DUMMY_PORT, ihost);
+
+ /* Construct the phys for this controller */
+ for (i = 0; i < SCI_MAX_PHYS; i++) {
+ /* Add all the PHYs to the dummy port */
+ sci_phy_construct(&ihost->phys[i],
+ &ihost->ports[SCI_MAX_PORTS], i);
+ }
+
+ ihost->invalid_phy_mask = 0;
+
+ sci_init_timer(&ihost->timer, controller_timeout);
+
+ return sci_controller_reset(ihost);
+}
+
+int sci_oem_parameters_validate(struct sci_oem_params *oem, u8 version)
+{
+ int i;
+
+ for (i = 0; i < SCI_MAX_PORTS; i++)
+ if (oem->ports[i].phy_mask > SCIC_SDS_PARM_PHY_MASK_MAX)
+ return -EINVAL;
+
+ for (i = 0; i < SCI_MAX_PHYS; i++)
+ if (oem->phys[i].sas_address.high == 0 &&
+ oem->phys[i].sas_address.low == 0)
+ return -EINVAL;
+
+ if (oem->controller.mode_type == SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE) {
+ for (i = 0; i < SCI_MAX_PHYS; i++)
+ if (oem->ports[i].phy_mask != 0)
+ return -EINVAL;
+ } else if (oem->controller.mode_type == SCIC_PORT_MANUAL_CONFIGURATION_MODE) {
+ u8 phy_mask = 0;
+
+ for (i = 0; i < SCI_MAX_PHYS; i++)
+ phy_mask |= oem->ports[i].phy_mask;
+
+ if (phy_mask == 0)
+ return -EINVAL;
+ } else
+ return -EINVAL;
+
+ if (oem->controller.max_concurr_spin_up > MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT ||
+ oem->controller.max_concurr_spin_up < 1)
+ return -EINVAL;
+
+ if (oem->controller.do_enable_ssc) {
+ if (version < ISCI_ROM_VER_1_1 && oem->controller.do_enable_ssc != 1)
+ return -EINVAL;
+
+ if (version >= ISCI_ROM_VER_1_1) {
+ u8 test = oem->controller.ssc_sata_tx_spread_level;
+
+ switch (test) {
+ case 0:
+ case 2:
+ case 3:
+ case 6:
+ case 7:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ test = oem->controller.ssc_sas_tx_spread_level;
+ if (oem->controller.ssc_sas_tx_type == 0) {
+ switch (test) {
+ case 0:
+ case 2:
+ case 3:
+ break;
+ default:
+ return -EINVAL;
+ }
+ } else if (oem->controller.ssc_sas_tx_type == 1) {
+ switch (test) {
+ case 0:
+ case 3:
+ case 6:
+ break;
+ default:
+ return -EINVAL;
+ }
+ }
+ }
+ }
+
+ return 0;
+}
+
+static u8 max_spin_up(struct isci_host *ihost)
+{
+ if (ihost->user_parameters.max_concurr_spinup)
+ return min_t(u8, ihost->user_parameters.max_concurr_spinup,
+ MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT);
+ else
+ return min_t(u8, ihost->oem_parameters.controller.max_concurr_spin_up,
+ MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT);
+}
+
+static void power_control_timeout(unsigned long data)
+{
+ struct sci_timer *tmr = (struct sci_timer *)data;
+ struct isci_host *ihost = container_of(tmr, typeof(*ihost), power_control.timer);
+ struct isci_phy *iphy;
+ unsigned long flags;
+ u8 i;
+
+ spin_lock_irqsave(&ihost->scic_lock, flags);
+
+ if (tmr->cancel)
+ goto done;
+
+ ihost->power_control.phys_granted_power = 0;
+
+ if (ihost->power_control.phys_waiting == 0) {
+ ihost->power_control.timer_started = false;
+ goto done;
+ }
+
+ for (i = 0; i < SCI_MAX_PHYS; i++) {
+
+ if (ihost->power_control.phys_waiting == 0)
+ break;
+
+ iphy = ihost->power_control.requesters[i];
+ if (iphy == NULL)
+ continue;
+
+ if (ihost->power_control.phys_granted_power >= max_spin_up(ihost))
+ break;
+
+ ihost->power_control.requesters[i] = NULL;
+ ihost->power_control.phys_waiting--;
+ ihost->power_control.phys_granted_power++;
+ sci_phy_consume_power_handler(iphy);
+
+ if (iphy->protocol == SAS_PROTOCOL_SSP) {
+ u8 j;
+
+ for (j = 0; j < SCI_MAX_PHYS; j++) {
+ struct isci_phy *requester = ihost->power_control.requesters[j];
+
+ /*
+ * Search the power_control queue to see if there are other phys
+ * attached to the same remote device. If found, take all of
+ * them out of await_sas_power state.
+ */
+ if (requester != NULL && requester != iphy) {
+ u8 other = memcmp(requester->frame_rcvd.iaf.sas_addr,
+ iphy->frame_rcvd.iaf.sas_addr,
+ sizeof(requester->frame_rcvd.iaf.sas_addr));
+
+ if (other == 0) {
+ ihost->power_control.requesters[j] = NULL;
+ ihost->power_control.phys_waiting--;
+ sci_phy_consume_power_handler(requester);
+ }
+ }
+ }
+ }
+ }
+
+ /*
+ * It doesn't matter if the power list is empty, we need to start the
+ * timer in case another phy becomes ready.
+ */
+ sci_mod_timer(tmr, SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL);
+ ihost->power_control.timer_started = true;
+
+done:
+ spin_unlock_irqrestore(&ihost->scic_lock, flags);
+}
+
+void sci_controller_power_control_queue_insert(struct isci_host *ihost,
+ struct isci_phy *iphy)
+{
+ BUG_ON(iphy == NULL);
+
+ if (ihost->power_control.phys_granted_power < max_spin_up(ihost)) {
+ ihost->power_control.phys_granted_power++;
+ sci_phy_consume_power_handler(iphy);
+
+ /*
+ * stop and start the power_control timer. When the timer fires, the
+ * no_of_phys_granted_power will be set to 0
+ */
+ if (ihost->power_control.timer_started)
+ sci_del_timer(&ihost->power_control.timer);
+
+ sci_mod_timer(&ihost->power_control.timer,
+ SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL);
+ ihost->power_control.timer_started = true;
+
+ } else {
+ /*
+ * There are phys, attached to the same sas address as this phy, are
+ * already in READY state, this phy don't need wait.
+ */
+ u8 i;
+ struct isci_phy *current_phy;
+
+ for (i = 0; i < SCI_MAX_PHYS; i++) {
+ u8 other;
+ current_phy = &ihost->phys[i];
+
+ other = memcmp(current_phy->frame_rcvd.iaf.sas_addr,
+ iphy->frame_rcvd.iaf.sas_addr,
+ sizeof(current_phy->frame_rcvd.iaf.sas_addr));
+
+ if (current_phy->sm.current_state_id == SCI_PHY_READY &&
+ current_phy->protocol == SAS_PROTOCOL_SSP &&
+ other == 0) {
+ sci_phy_consume_power_handler(iphy);
+ break;
+ }
+ }
+
+ if (i == SCI_MAX_PHYS) {
+ /* Add the phy in the waiting list */
+ ihost->power_control.requesters[iphy->phy_index] = iphy;
+ ihost->power_control.phys_waiting++;
+ }
+ }
+}
+
+void sci_controller_power_control_queue_remove(struct isci_host *ihost,
+ struct isci_phy *iphy)
+{
+ BUG_ON(iphy == NULL);
+
+ if (ihost->power_control.requesters[iphy->phy_index])
+ ihost->power_control.phys_waiting--;
+
+ ihost->power_control.requesters[iphy->phy_index] = NULL;
+}
+
+static int is_long_cable(int phy, unsigned char selection_byte)
+{
+ return !!(selection_byte & (1 << phy));
+}
+
+static int is_medium_cable(int phy, unsigned char selection_byte)
+{
+ return !!(selection_byte & (1 << (phy + 4)));
+}
+
+static enum cable_selections decode_selection_byte(
+ int phy,
+ unsigned char selection_byte)
+{
+ return ((selection_byte & (1 << phy)) ? 1 : 0)
+ + (selection_byte & (1 << (phy + 4)) ? 2 : 0);
+}
+
+static unsigned char *to_cable_select(struct isci_host *ihost)
+{
+ if (is_cable_select_overridden())
+ return ((unsigned char *)&cable_selection_override)
+ + ihost->id;
+ else
+ return &ihost->oem_parameters.controller.cable_selection_mask;
+}
+
+enum cable_selections decode_cable_selection(struct isci_host *ihost, int phy)
+{
+ return decode_selection_byte(phy, *to_cable_select(ihost));
+}
+
+char *lookup_cable_names(enum cable_selections selection)
+{
+ static char *cable_names[] = {
+ [short_cable] = "short",
+ [long_cable] = "long",
+ [medium_cable] = "medium",
+ [undefined_cable] = "<undefined, assumed long>" /* bit 0==1 */
+ };
+ return (selection <= undefined_cable) ? cable_names[selection]
+ : cable_names[undefined_cable];
+}
+
+#define AFE_REGISTER_WRITE_DELAY 10
+
+static void sci_controller_afe_initialization(struct isci_host *ihost)
+{
+ struct scu_afe_registers __iomem *afe = &ihost->scu_registers->afe;
+ const struct sci_oem_params *oem = &ihost->oem_parameters;
+ struct pci_dev *pdev = ihost->pdev;
+ u32 afe_status;
+ u32 phy_id;
+ unsigned char cable_selection_mask = *to_cable_select(ihost);
+
+ /* Clear DFX Status registers */
+ writel(0x0081000f, &afe->afe_dfx_master_control0);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ if (is_b0(pdev) || is_c0(pdev) || is_c1(pdev)) {
+ /* PM Rx Equalization Save, PM SPhy Rx Acknowledgement
+ * Timer, PM Stagger Timer
+ */
+ writel(0x0007FFFF, &afe->afe_pmsn_master_control2);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+ }
+
+ /* Configure bias currents to normal */
+ if (is_a2(pdev))
+ writel(0x00005A00, &afe->afe_bias_control);
+ else if (is_b0(pdev) || is_c0(pdev))
+ writel(0x00005F00, &afe->afe_bias_control);
+ else if (is_c1(pdev))
+ writel(0x00005500, &afe->afe_bias_control);
+
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ /* Enable PLL */
+ if (is_a2(pdev))
+ writel(0x80040908, &afe->afe_pll_control0);
+ else if (is_b0(pdev) || is_c0(pdev))
+ writel(0x80040A08, &afe->afe_pll_control0);
+ else if (is_c1(pdev)) {
+ writel(0x80000B08, &afe->afe_pll_control0);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+ writel(0x00000B08, &afe->afe_pll_control0);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+ writel(0x80000B08, &afe->afe_pll_control0);
+ }
+
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ /* Wait for the PLL to lock */
+ do {
+ afe_status = readl(&afe->afe_common_block_status);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+ } while ((afe_status & 0x00001000) == 0);
+
+ if (is_a2(pdev)) {
+ /* Shorten SAS SNW lock time (RxLock timer value from 76
+ * us to 50 us)
+ */
+ writel(0x7bcc96ad, &afe->afe_pmsn_master_control0);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+ }
+
+ for (phy_id = 0; phy_id < SCI_MAX_PHYS; phy_id++) {
+ struct scu_afe_transceiver __iomem *xcvr = &afe->scu_afe_xcvr[phy_id];
+ const struct sci_phy_oem_params *oem_phy = &oem->phys[phy_id];
+ int cable_length_long =
+ is_long_cable(phy_id, cable_selection_mask);
+ int cable_length_medium =
+ is_medium_cable(phy_id, cable_selection_mask);
+
+ if (is_a2(pdev)) {
+ /* All defaults, except the Receive Word
+ * Alignament/Comma Detect Enable....(0xe800)
+ */
+ writel(0x00004512, &xcvr->afe_xcvr_control0);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ writel(0x0050100F, &xcvr->afe_xcvr_control1);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+ } else if (is_b0(pdev)) {
+ /* Configure transmitter SSC parameters */
+ writel(0x00030000, &xcvr->afe_tx_ssc_control);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+ } else if (is_c0(pdev)) {
+ /* Configure transmitter SSC parameters */
+ writel(0x00010202, &xcvr->afe_tx_ssc_control);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ /* All defaults, except the Receive Word
+ * Alignament/Comma Detect Enable....(0xe800)
+ */
+ writel(0x00014500, &xcvr->afe_xcvr_control0);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+ } else if (is_c1(pdev)) {
+ /* Configure transmitter SSC parameters */
+ writel(0x00010202, &xcvr->afe_tx_ssc_control);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ /* All defaults, except the Receive Word
+ * Alignament/Comma Detect Enable....(0xe800)
+ */
+ writel(0x0001C500, &xcvr->afe_xcvr_control0);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+ }
+
+ /* Power up TX and RX out from power down (PWRDNTX and
+ * PWRDNRX) & increase TX int & ext bias 20%....(0xe85c)
+ */
+ if (is_a2(pdev))
+ writel(0x000003F0, &xcvr->afe_channel_control);
+ else if (is_b0(pdev)) {
+ writel(0x000003D7, &xcvr->afe_channel_control);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ writel(0x000003D4, &xcvr->afe_channel_control);
+ } else if (is_c0(pdev)) {
+ writel(0x000001E7, &xcvr->afe_channel_control);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ writel(0x000001E4, &xcvr->afe_channel_control);
+ } else if (is_c1(pdev)) {
+ writel(cable_length_long ? 0x000002F7 : 0x000001F7,
+ &xcvr->afe_channel_control);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ writel(cable_length_long ? 0x000002F4 : 0x000001F4,
+ &xcvr->afe_channel_control);
+ }
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ if (is_a2(pdev)) {
+ /* Enable TX equalization (0xe824) */
+ writel(0x00040000, &xcvr->afe_tx_control);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+ }
+
+ if (is_a2(pdev) || is_b0(pdev))
+ /* RDPI=0x0(RX Power On), RXOOBDETPDNC=0x0,
+ * TPD=0x0(TX Power On), RDD=0x0(RX Detect
+ * Enabled) ....(0xe800)
+ */
+ writel(0x00004100, &xcvr->afe_xcvr_control0);
+ else if (is_c0(pdev))
+ writel(0x00014100, &xcvr->afe_xcvr_control0);
+ else if (is_c1(pdev))
+ writel(0x0001C100, &xcvr->afe_xcvr_control0);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ /* Leave DFE/FFE on */
+ if (is_a2(pdev))
+ writel(0x3F11103F, &xcvr->afe_rx_ssc_control0);
+ else if (is_b0(pdev)) {
+ writel(0x3F11103F, &xcvr->afe_rx_ssc_control0);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+ /* Enable TX equalization (0xe824) */
+ writel(0x00040000, &xcvr->afe_tx_control);
+ } else if (is_c0(pdev)) {
+ writel(0x01400C0F, &xcvr->afe_rx_ssc_control1);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ writel(0x3F6F103F, &xcvr->afe_rx_ssc_control0);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ /* Enable TX equalization (0xe824) */
+ writel(0x00040000, &xcvr->afe_tx_control);
+ } else if (is_c1(pdev)) {
+ writel(cable_length_long ? 0x01500C0C :
+ cable_length_medium ? 0x01400C0D : 0x02400C0D,
+ &xcvr->afe_xcvr_control1);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ writel(0x000003E0, &xcvr->afe_dfx_rx_control1);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ writel(cable_length_long ? 0x33091C1F :
+ cable_length_medium ? 0x3315181F : 0x2B17161F,
+ &xcvr->afe_rx_ssc_control0);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ /* Enable TX equalization (0xe824) */
+ writel(0x00040000, &xcvr->afe_tx_control);
+ }
+
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ writel(oem_phy->afe_tx_amp_control0, &xcvr->afe_tx_amp_control0);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ writel(oem_phy->afe_tx_amp_control1, &xcvr->afe_tx_amp_control1);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ writel(oem_phy->afe_tx_amp_control2, &xcvr->afe_tx_amp_control2);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ writel(oem_phy->afe_tx_amp_control3, &xcvr->afe_tx_amp_control3);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+ }
+
+ /* Transfer control to the PEs */
+ writel(0x00010f00, &afe->afe_dfx_master_control0);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+}
+
+static void sci_controller_initialize_power_control(struct isci_host *ihost)
+{
+ sci_init_timer(&ihost->power_control.timer, power_control_timeout);
+
+ memset(ihost->power_control.requesters, 0,
+ sizeof(ihost->power_control.requesters));
+
+ ihost->power_control.phys_waiting = 0;
+ ihost->power_control.phys_granted_power = 0;
+}
+
+static enum sci_status sci_controller_initialize(struct isci_host *ihost)
+{
+ struct sci_base_state_machine *sm = &ihost->sm;
+ enum sci_status result = SCI_FAILURE;
+ unsigned long i, state, val;
+
+ if (ihost->sm.current_state_id != SCIC_RESET) {
+ dev_warn(&ihost->pdev->dev, "%s invalid state: %d\n",
+ __func__, ihost->sm.current_state_id);
+ return SCI_FAILURE_INVALID_STATE;
+ }
+
+ sci_change_state(sm, SCIC_INITIALIZING);
+
+ sci_init_timer(&ihost->phy_timer, phy_startup_timeout);
+
+ ihost->next_phy_to_start = 0;
+ ihost->phy_startup_timer_pending = false;
+
+ sci_controller_initialize_power_control(ihost);
+
+ /*
+ * There is nothing to do here for B0 since we do not have to
+ * program the AFE registers.
+ * / @todo The AFE settings are supposed to be correct for the B0 but
+ * / presently they seem to be wrong. */
+ sci_controller_afe_initialization(ihost);
+
+
+ /* Take the hardware out of reset */
+ writel(0, &ihost->smu_registers->soft_reset_control);
+
+ /*
+ * / @todo Provide meaningfull error code for hardware failure
+ * result = SCI_FAILURE_CONTROLLER_HARDWARE; */
+ for (i = 100; i >= 1; i--) {
+ u32 status;
+
+ /* Loop until the hardware reports success */
+ udelay(SCU_CONTEXT_RAM_INIT_STALL_TIME);
+ status = readl(&ihost->smu_registers->control_status);
+
+ if ((status & SCU_RAM_INIT_COMPLETED) == SCU_RAM_INIT_COMPLETED)
+ break;
+ }
+ if (i == 0)
+ goto out;
+
+ /*
+ * Determine what are the actaul device capacities that the
+ * hardware will support */
+ val = readl(&ihost->smu_registers->device_context_capacity);
+
+ /* Record the smaller of the two capacity values */
+ ihost->logical_port_entries = min(smu_max_ports(val), SCI_MAX_PORTS);
+ ihost->task_context_entries = min(smu_max_task_contexts(val), SCI_MAX_IO_REQUESTS);
+ ihost->remote_node_entries = min(smu_max_rncs(val), SCI_MAX_REMOTE_DEVICES);
+
+ /*
+ * Make all PEs that are unassigned match up with the
+ * logical ports
+ */
+ for (i = 0; i < ihost->logical_port_entries; i++) {
+ struct scu_port_task_scheduler_group_registers __iomem
+ *ptsg = &ihost->scu_registers->peg0.ptsg;
+
+ writel(i, &ptsg->protocol_engine[i]);
+ }
+
+ /* Initialize hardware PCI Relaxed ordering in DMA engines */
+ val = readl(&ihost->scu_registers->sdma.pdma_configuration);
+ val |= SCU_PDMACR_GEN_BIT(PCI_RELAXED_ORDERING_ENABLE);
+ writel(val, &ihost->scu_registers->sdma.pdma_configuration);
+
+ val = readl(&ihost->scu_registers->sdma.cdma_configuration);
+ val |= SCU_CDMACR_GEN_BIT(PCI_RELAXED_ORDERING_ENABLE);
+ writel(val, &ihost->scu_registers->sdma.cdma_configuration);
+
+ /*
+ * Initialize the PHYs before the PORTs because the PHY registers
+ * are accessed during the port initialization.
+ */
+ for (i = 0; i < SCI_MAX_PHYS; i++) {
+ result = sci_phy_initialize(&ihost->phys[i],
+ &ihost->scu_registers->peg0.pe[i].tl,
+ &ihost->scu_registers->peg0.pe[i].ll);
+ if (result != SCI_SUCCESS)
+ goto out;
+ }
+
+ for (i = 0; i < ihost->logical_port_entries; i++) {
+ struct isci_port *iport = &ihost->ports[i];
+
+ iport->port_task_scheduler_registers = &ihost->scu_registers->peg0.ptsg.port[i];
+ iport->port_pe_configuration_register = &ihost->scu_registers->peg0.ptsg.protocol_engine[0];
+ iport->viit_registers = &ihost->scu_registers->peg0.viit[i];
+ }
+
+ result = sci_port_configuration_agent_initialize(ihost, &ihost->port_agent);
+
+ out:
+ /* Advance the controller state machine */
+ if (result == SCI_SUCCESS)
+ state = SCIC_INITIALIZED;
+ else
+ state = SCIC_FAILED;
+ sci_change_state(sm, state);
+
+ return result;
+}
+
+static int sci_controller_dma_alloc(struct isci_host *ihost)
+{
+ struct device *dev = &ihost->pdev->dev;
+ size_t size;
+ int i;
+
+ /* detect re-initialization */
+ if (ihost->completion_queue)
+ return 0;
+
+ size = SCU_MAX_COMPLETION_QUEUE_ENTRIES * sizeof(u32);
+ ihost->completion_queue = dmam_alloc_coherent(dev, size, &ihost->cq_dma,
+ GFP_KERNEL);
+ if (!ihost->completion_queue)
+ return -ENOMEM;
+
+ size = ihost->remote_node_entries * sizeof(union scu_remote_node_context);
+ ihost->remote_node_context_table = dmam_alloc_coherent(dev, size, &ihost->rnc_dma,
+ GFP_KERNEL);
+
+ if (!ihost->remote_node_context_table)
+ return -ENOMEM;
+
+ size = ihost->task_context_entries * sizeof(struct scu_task_context),
+ ihost->task_context_table = dmam_alloc_coherent(dev, size, &ihost->tc_dma,
+ GFP_KERNEL);
+ if (!ihost->task_context_table)
+ return -ENOMEM;
+
+ size = SCI_UFI_TOTAL_SIZE;
+ ihost->ufi_buf = dmam_alloc_coherent(dev, size, &ihost->ufi_dma, GFP_KERNEL);
+ if (!ihost->ufi_buf)
+ return -ENOMEM;
+
+ for (i = 0; i < SCI_MAX_IO_REQUESTS; i++) {
+ struct isci_request *ireq;
+ dma_addr_t dma;
+
+ ireq = dmam_alloc_coherent(dev, sizeof(*ireq), &dma, GFP_KERNEL);
+ if (!ireq)
+ return -ENOMEM;
+
+ ireq->tc = &ihost->task_context_table[i];
+ ireq->owning_controller = ihost;
+ ireq->request_daddr = dma;
+ ireq->isci_host = ihost;
+ ihost->reqs[i] = ireq;
+ }
+
+ return 0;
+}
+
+static int sci_controller_mem_init(struct isci_host *ihost)
+{
+ int err = sci_controller_dma_alloc(ihost);
+
+ if (err)
+ return err;
+
+ writel(lower_32_bits(ihost->cq_dma), &ihost->smu_registers->completion_queue_lower);
+ writel(upper_32_bits(ihost->cq_dma), &ihost->smu_registers->completion_queue_upper);
+
+ writel(lower_32_bits(ihost->rnc_dma), &ihost->smu_registers->remote_node_context_lower);
+ writel(upper_32_bits(ihost->rnc_dma), &ihost->smu_registers->remote_node_context_upper);
+
+ writel(lower_32_bits(ihost->tc_dma), &ihost->smu_registers->host_task_table_lower);
+ writel(upper_32_bits(ihost->tc_dma), &ihost->smu_registers->host_task_table_upper);
+
+ sci_unsolicited_frame_control_construct(ihost);
+
+ /*
+ * Inform the silicon as to the location of the UF headers and
+ * address table.
+ */
+ writel(lower_32_bits(ihost->uf_control.headers.physical_address),
+ &ihost->scu_registers->sdma.uf_header_base_address_lower);
+ writel(upper_32_bits(ihost->uf_control.headers.physical_address),
+ &ihost->scu_registers->sdma.uf_header_base_address_upper);
+
+ writel(lower_32_bits(ihost->uf_control.address_table.physical_address),
+ &ihost->scu_registers->sdma.uf_address_table_lower);
+ writel(upper_32_bits(ihost->uf_control.address_table.physical_address),
+ &ihost->scu_registers->sdma.uf_address_table_upper);
+
+ return 0;
+}
+
+/**
+ * isci_host_init - (re-)initialize hardware and internal (private) state
+ * @ihost: host to init
+ *
+ * Any public facing objects (like asd_sas_port, and asd_sas_phys), or
+ * one-time initialization objects like locks and waitqueues, are
+ * not touched (they are initialized in isci_host_alloc)
+ */
+int isci_host_init(struct isci_host *ihost)
+{
+ int i, err;
+ enum sci_status status;
+
+ spin_lock_irq(&ihost->scic_lock);
+ status = sci_controller_construct(ihost, scu_base(ihost), smu_base(ihost));
+ spin_unlock_irq(&ihost->scic_lock);
+ if (status != SCI_SUCCESS) {
+ dev_err(&ihost->pdev->dev,
+ "%s: sci_controller_construct failed - status = %x\n",
+ __func__,
+ status);
+ return -ENODEV;
+ }
+
+ spin_lock_irq(&ihost->scic_lock);
+ status = sci_controller_initialize(ihost);
+ spin_unlock_irq(&ihost->scic_lock);
+ if (status != SCI_SUCCESS) {
+ dev_warn(&ihost->pdev->dev,
+ "%s: sci_controller_initialize failed -"
+ " status = 0x%x\n",
+ __func__, status);
+ return -ENODEV;
+ }
+
+ err = sci_controller_mem_init(ihost);
+ if (err)
+ return err;
+
+ /* enable sgpio */
+ writel(1, &ihost->scu_registers->peg0.sgpio.interface_control);
+ for (i = 0; i < isci_gpio_count(ihost); i++)
+ writel(SGPIO_HW_CONTROL, &ihost->scu_registers->peg0.sgpio.output_data_select[i]);
+ writel(0, &ihost->scu_registers->peg0.sgpio.vendor_specific_code);
+
+ return 0;
+}
+
+void sci_controller_link_up(struct isci_host *ihost, struct isci_port *iport,
+ struct isci_phy *iphy)
+{
+ switch (ihost->sm.current_state_id) {
+ case SCIC_STARTING:
+ sci_del_timer(&ihost->phy_timer);
+ ihost->phy_startup_timer_pending = false;
+ ihost->port_agent.link_up_handler(ihost, &ihost->port_agent,
+ iport, iphy);
+ sci_controller_start_next_phy(ihost);
+ break;
+ case SCIC_READY:
+ ihost->port_agent.link_up_handler(ihost, &ihost->port_agent,
+ iport, iphy);
+ break;
+ default:
+ dev_dbg(&ihost->pdev->dev,
+ "%s: SCIC Controller linkup event from phy %d in "
+ "unexpected state %d\n", __func__, iphy->phy_index,
+ ihost->sm.current_state_id);
+ }
+}
+
+void sci_controller_link_down(struct isci_host *ihost, struct isci_port *iport,
+ struct isci_phy *iphy)
+{
+ switch (ihost->sm.current_state_id) {
+ case SCIC_STARTING:
+ case SCIC_READY:
+ ihost->port_agent.link_down_handler(ihost, &ihost->port_agent,
+ iport, iphy);
+ break;
+ default:
+ dev_dbg(&ihost->pdev->dev,
+ "%s: SCIC Controller linkdown event from phy %d in "
+ "unexpected state %d\n",
+ __func__,
+ iphy->phy_index,
+ ihost->sm.current_state_id);
+ }
+}
+
+bool sci_controller_has_remote_devices_stopping(struct isci_host *ihost)
+{
+ u32 index;
+
+ for (index = 0; index < ihost->remote_node_entries; index++) {
+ if ((ihost->device_table[index] != NULL) &&
+ (ihost->device_table[index]->sm.current_state_id == SCI_DEV_STOPPING))
+ return true;
+ }
+
+ return false;
+}
+
+void sci_controller_remote_device_stopped(struct isci_host *ihost,
+ struct isci_remote_device *idev)
+{
+ if (ihost->sm.current_state_id != SCIC_STOPPING) {
+ dev_dbg(&ihost->pdev->dev,
+ "SCIC Controller 0x%p remote device stopped event "
+ "from device 0x%p in unexpected state %d\n",
+ ihost, idev,
+ ihost->sm.current_state_id);
+ return;
+ }
+
+ if (!sci_controller_has_remote_devices_stopping(ihost))
+ isci_host_stop_complete(ihost);
+}
+
+void sci_controller_post_request(struct isci_host *ihost, u32 request)
+{
+ dev_dbg(&ihost->pdev->dev, "%s[%d]: %#x\n",
+ __func__, ihost->id, request);
+
+ writel(request, &ihost->smu_registers->post_context_port);
+}
+
+struct isci_request *sci_request_by_tag(struct isci_host *ihost, u16 io_tag)
+{
+ u16 task_index;
+ u16 task_sequence;
+
+ task_index = ISCI_TAG_TCI(io_tag);
+
+ if (task_index < ihost->task_context_entries) {
+ struct isci_request *ireq = ihost->reqs[task_index];
+
+ if (test_bit(IREQ_ACTIVE, &ireq->flags)) {
+ task_sequence = ISCI_TAG_SEQ(io_tag);
+
+ if (task_sequence == ihost->io_request_sequence[task_index])
+ return ireq;
+ }
+ }
+
+ return NULL;
+}
+
+/**
+ * This method allocates remote node index and the reserves the remote node
+ * context space for use. This method can fail if there are no more remote
+ * node index available.
+ * @scic: This is the controller object which contains the set of
+ * free remote node ids
+ * @sci_dev: This is the device object which is requesting the a remote node
+ * id
+ * @node_id: This is the remote node id that is assinged to the device if one
+ * is available
+ *
+ * enum sci_status SCI_FAILURE_OUT_OF_RESOURCES if there are no available remote
+ * node index available.
+ */
+enum sci_status sci_controller_allocate_remote_node_context(struct isci_host *ihost,
+ struct isci_remote_device *idev,
+ u16 *node_id)
+{
+ u16 node_index;
+ u32 remote_node_count = sci_remote_device_node_count(idev);
+
+ node_index = sci_remote_node_table_allocate_remote_node(
+ &ihost->available_remote_nodes, remote_node_count
+ );
+
+ if (node_index != SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) {
+ ihost->device_table[node_index] = idev;
+
+ *node_id = node_index;
+
+ return SCI_SUCCESS;
+ }
+
+ return SCI_FAILURE_INSUFFICIENT_RESOURCES;
+}
+
+void sci_controller_free_remote_node_context(struct isci_host *ihost,
+ struct isci_remote_device *idev,
+ u16 node_id)
+{
+ u32 remote_node_count = sci_remote_device_node_count(idev);
+
+ if (ihost->device_table[node_id] == idev) {
+ ihost->device_table[node_id] = NULL;
+
+ sci_remote_node_table_release_remote_node_index(
+ &ihost->available_remote_nodes, remote_node_count, node_id
+ );
+ }
+}
+
+void sci_controller_copy_sata_response(void *response_buffer,
+ void *frame_header,
+ void *frame_buffer)
+{
+ /* XXX type safety? */
+ memcpy(response_buffer, frame_header, sizeof(u32));
+
+ memcpy(response_buffer + sizeof(u32),
+ frame_buffer,
+ sizeof(struct dev_to_host_fis) - sizeof(u32));
+}
+
+void sci_controller_release_frame(struct isci_host *ihost, u32 frame_index)
+{
+ if (sci_unsolicited_frame_control_release_frame(&ihost->uf_control, frame_index))
+ writel(ihost->uf_control.get,
+ &ihost->scu_registers->sdma.unsolicited_frame_get_pointer);
+}
+
+void isci_tci_free(struct isci_host *ihost, u16 tci)
+{
+ u16 tail = ihost->tci_tail & (SCI_MAX_IO_REQUESTS-1);
+
+ ihost->tci_pool[tail] = tci;
+ ihost->tci_tail = tail + 1;
+}
+
+static u16 isci_tci_alloc(struct isci_host *ihost)
+{
+ u16 head = ihost->tci_head & (SCI_MAX_IO_REQUESTS-1);
+ u16 tci = ihost->tci_pool[head];
+
+ ihost->tci_head = head + 1;
+ return tci;
+}
+
+static u16 isci_tci_space(struct isci_host *ihost)
+{
+ return CIRC_SPACE(ihost->tci_head, ihost->tci_tail, SCI_MAX_IO_REQUESTS);
+}
+
+u16 isci_alloc_tag(struct isci_host *ihost)
+{
+ if (isci_tci_space(ihost)) {
+ u16 tci = isci_tci_alloc(ihost);
+ u8 seq = ihost->io_request_sequence[tci];
+
+ return ISCI_TAG(seq, tci);
+ }
+
+ return SCI_CONTROLLER_INVALID_IO_TAG;
+}
+
+enum sci_status isci_free_tag(struct isci_host *ihost, u16 io_tag)
+{
+ u16 tci = ISCI_TAG_TCI(io_tag);
+ u16 seq = ISCI_TAG_SEQ(io_tag);
+
+ /* prevent tail from passing head */
+ if (isci_tci_active(ihost) == 0)
+ return SCI_FAILURE_INVALID_IO_TAG;
+
+ if (seq == ihost->io_request_sequence[tci]) {
+ ihost->io_request_sequence[tci] = (seq+1) & (SCI_MAX_SEQ-1);
+
+ isci_tci_free(ihost, tci);
+
+ return SCI_SUCCESS;
+ }
+ return SCI_FAILURE_INVALID_IO_TAG;
+}
+
+enum sci_status sci_controller_start_io(struct isci_host *ihost,
+ struct isci_remote_device *idev,
+ struct isci_request *ireq)
+{
+ enum sci_status status;
+
+ if (ihost->sm.current_state_id != SCIC_READY) {
+ dev_warn(&ihost->pdev->dev, "%s invalid state: %d\n",
+ __func__, ihost->sm.current_state_id);
+ return SCI_FAILURE_INVALID_STATE;
+ }
+
+ status = sci_remote_device_start_io(ihost, idev, ireq);
+ if (status != SCI_SUCCESS)
+ return status;
+
+ set_bit(IREQ_ACTIVE, &ireq->flags);
+ sci_controller_post_request(ihost, ireq->post_context);
+ return SCI_SUCCESS;
+}
+
+enum sci_status sci_controller_terminate_request(struct isci_host *ihost,
+ struct isci_remote_device *idev,
+ struct isci_request *ireq)
+{
+ /* terminate an ongoing (i.e. started) core IO request. This does not
+ * abort the IO request at the target, but rather removes the IO
+ * request from the host controller.
+ */
+ enum sci_status status;
+
+ if (ihost->sm.current_state_id != SCIC_READY) {
+ dev_warn(&ihost->pdev->dev, "%s invalid state: %d\n",
+ __func__, ihost->sm.current_state_id);
+ return SCI_FAILURE_INVALID_STATE;
+ }
+ status = sci_io_request_terminate(ireq);
+
+ dev_dbg(&ihost->pdev->dev, "%s: status=%d; ireq=%p; flags=%lx\n",
+ __func__, status, ireq, ireq->flags);
+
+ if ((status == SCI_SUCCESS) &&
+ !test_bit(IREQ_PENDING_ABORT, &ireq->flags) &&
+ !test_and_set_bit(IREQ_TC_ABORT_POSTED, &ireq->flags)) {
+ /* Utilize the original post context command and or in the
+ * POST_TC_ABORT request sub-type.
+ */
+ sci_controller_post_request(
+ ihost, ireq->post_context |
+ SCU_CONTEXT_COMMAND_REQUEST_POST_TC_ABORT);
+ }
+ return status;
+}
+
+/**
+ * sci_controller_complete_io() - This method will perform core specific
+ * completion operations for an IO request. After this method is invoked,
+ * the user should consider the IO request as invalid until it is properly
+ * reused (i.e. re-constructed).
+ * @ihost: The handle to the controller object for which to complete the
+ * IO request.
+ * @idev: The handle to the remote device object for which to complete
+ * the IO request.
+ * @ireq: the handle to the io request object to complete.
+ */
+enum sci_status sci_controller_complete_io(struct isci_host *ihost,
+ struct isci_remote_device *idev,
+ struct isci_request *ireq)
+{
+ enum sci_status status;
+ u16 index;
+
+ switch (ihost->sm.current_state_id) {
+ case SCIC_STOPPING:
+ /* XXX: Implement this function */
+ return SCI_FAILURE;
+ case SCIC_READY:
+ status = sci_remote_device_complete_io(ihost, idev, ireq);
+ if (status != SCI_SUCCESS)
+ return status;
+
+ index = ISCI_TAG_TCI(ireq->io_tag);
+ clear_bit(IREQ_ACTIVE, &ireq->flags);
+ return SCI_SUCCESS;
+ default:
+ dev_warn(&ihost->pdev->dev, "%s invalid state: %d\n",
+ __func__, ihost->sm.current_state_id);
+ return SCI_FAILURE_INVALID_STATE;
+ }
+
+}
+
+enum sci_status sci_controller_continue_io(struct isci_request *ireq)
+{
+ struct isci_host *ihost = ireq->owning_controller;
+
+ if (ihost->sm.current_state_id != SCIC_READY) {
+ dev_warn(&ihost->pdev->dev, "%s invalid state: %d\n",
+ __func__, ihost->sm.current_state_id);
+ return SCI_FAILURE_INVALID_STATE;
+ }
+
+ set_bit(IREQ_ACTIVE, &ireq->flags);
+ sci_controller_post_request(ihost, ireq->post_context);
+ return SCI_SUCCESS;
+}
+
+/**
+ * sci_controller_start_task() - This method is called by the SCIC user to
+ * send/start a framework task management request.
+ * @controller: the handle to the controller object for which to start the task
+ * management request.
+ * @remote_device: the handle to the remote device object for which to start
+ * the task management request.
+ * @task_request: the handle to the task request object to start.
+ */
+enum sci_task_status sci_controller_start_task(struct isci_host *ihost,
+ struct isci_remote_device *idev,
+ struct isci_request *ireq)
+{
+ enum sci_status status;
+
+ if (ihost->sm.current_state_id != SCIC_READY) {
+ dev_warn(&ihost->pdev->dev,
+ "%s: SCIC Controller starting task from invalid "
+ "state\n",
+ __func__);
+ return SCI_TASK_FAILURE_INVALID_STATE;
+ }
+
+ status = sci_remote_device_start_task(ihost, idev, ireq);
+ switch (status) {
+ case SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS:
+ set_bit(IREQ_ACTIVE, &ireq->flags);
+
+ /*
+ * We will let framework know this task request started successfully,
+ * although core is still woring on starting the request (to post tc when
+ * RNC is resumed.)
+ */
+ return SCI_SUCCESS;
+ case SCI_SUCCESS:
+ set_bit(IREQ_ACTIVE, &ireq->flags);
+ sci_controller_post_request(ihost, ireq->post_context);
+ break;
+ default:
+ break;
+ }
+
+ return status;
+}
+
+static int sci_write_gpio_tx_gp(struct isci_host *ihost, u8 reg_index, u8 reg_count, u8 *write_data)
+{
+ int d;
+
+ /* no support for TX_GP_CFG */
+ if (reg_index == 0)
+ return -EINVAL;
+
+ for (d = 0; d < isci_gpio_count(ihost); d++) {
+ u32 val = 0x444; /* all ODx.n clear */
+ int i;
+
+ for (i = 0; i < 3; i++) {
+ int bit = (i << 2) + 2;
+
+ bit = try_test_sas_gpio_gp_bit(to_sas_gpio_od(d, i),
+ write_data, reg_index,
+ reg_count);
+ if (bit < 0)
+ break;
+
+ /* if od is set, clear the 'invert' bit */
+ val &= ~(bit << ((i << 2) + 2));
+ }
+
+ if (i < 3)
+ break;
+ writel(val, &ihost->scu_registers->peg0.sgpio.output_data_select[d]);
+ }
+
+ /* unless reg_index is > 1, we should always be able to write at
+ * least one register
+ */
+ return d > 0;
+}
+
+int isci_gpio_write(struct sas_ha_struct *sas_ha, u8 reg_type, u8 reg_index,
+ u8 reg_count, u8 *write_data)
+{
+ struct isci_host *ihost = sas_ha->lldd_ha;
+ int written;
+
+ switch (reg_type) {
+ case SAS_GPIO_REG_TX_GP:
+ written = sci_write_gpio_tx_gp(ihost, reg_index, reg_count, write_data);
+ break;
+ default:
+ written = -EINVAL;
+ }
+
+ return written;
+}
Code Review / kvmfornfv.git / blobdiff