--- /dev/null
+#ifndef dprintk
+# define dprintk(x)
+#endif
+/* eg: if (nblank(dprintk(x))) */
+#define _nblank(x) #x
+#define nblank(x) _nblank(x)[0]
+
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+
+/*------------------------------------------------------------------------------
+ * D E F I N E S
+ *----------------------------------------------------------------------------*/
+
+#define AAC_MAX_MSIX 8 /* vectors */
+#define AAC_PCI_MSI_ENABLE 0x8000
+
+enum {
+ AAC_ENABLE_INTERRUPT = 0x0,
+ AAC_DISABLE_INTERRUPT,
+ AAC_ENABLE_MSIX,
+ AAC_DISABLE_MSIX,
+ AAC_CLEAR_AIF_BIT,
+ AAC_CLEAR_SYNC_BIT,
+ AAC_ENABLE_INTX
+};
+
+#define AAC_INT_MODE_INTX (1<<0)
+#define AAC_INT_MODE_MSI (1<<1)
+#define AAC_INT_MODE_AIF (1<<2)
+#define AAC_INT_MODE_SYNC (1<<3)
+
+#define AAC_INT_ENABLE_TYPE1_INTX 0xfffffffb
+#define AAC_INT_ENABLE_TYPE1_MSIX 0xfffffffa
+#define AAC_INT_DISABLE_ALL 0xffffffff
+
+/* Bit definitions in IOA->Host Interrupt Register */
+#define PMC_TRANSITION_TO_OPERATIONAL (1<<31)
+#define PMC_IOARCB_TRANSFER_FAILED (1<<28)
+#define PMC_IOA_UNIT_CHECK (1<<27)
+#define PMC_NO_HOST_RRQ_FOR_CMD_RESPONSE (1<<26)
+#define PMC_CRITICAL_IOA_OP_IN_PROGRESS (1<<25)
+#define PMC_IOARRIN_LOST (1<<4)
+#define PMC_SYSTEM_BUS_MMIO_ERROR (1<<3)
+#define PMC_IOA_PROCESSOR_IN_ERROR_STATE (1<<2)
+#define PMC_HOST_RRQ_VALID (1<<1)
+#define PMC_OPERATIONAL_STATUS (1<<31)
+#define PMC_ALLOW_MSIX_VECTOR0 (1<<0)
+
+#define PMC_IOA_ERROR_INTERRUPTS (PMC_IOARCB_TRANSFER_FAILED | \
+ PMC_IOA_UNIT_CHECK | \
+ PMC_NO_HOST_RRQ_FOR_CMD_RESPONSE | \
+ PMC_IOARRIN_LOST | \
+ PMC_SYSTEM_BUS_MMIO_ERROR | \
+ PMC_IOA_PROCESSOR_IN_ERROR_STATE)
+
+#define PMC_ALL_INTERRUPT_BITS (PMC_IOA_ERROR_INTERRUPTS | \
+ PMC_HOST_RRQ_VALID | \
+ PMC_TRANSITION_TO_OPERATIONAL | \
+ PMC_ALLOW_MSIX_VECTOR0)
+#define PMC_GLOBAL_INT_BIT2 0x00000004
+#define PMC_GLOBAL_INT_BIT0 0x00000001
+
+#ifndef AAC_DRIVER_BUILD
+# define AAC_DRIVER_BUILD 40709
+# define AAC_DRIVER_BRANCH "-ms"
+#endif
+#define MAXIMUM_NUM_CONTAINERS 32
+
+#define AAC_NUM_MGT_FIB 8
+#define AAC_NUM_IO_FIB (1024 - AAC_NUM_MGT_FIB)
+#define AAC_NUM_FIB (AAC_NUM_IO_FIB + AAC_NUM_MGT_FIB)
+
+#define AAC_MAX_LUN (8)
+
+#define AAC_MAX_HOSTPHYSMEMPAGES (0xfffff)
+#define AAC_MAX_32BIT_SGBCOUNT ((unsigned short)256)
+
+#define AAC_DEBUG_INSTRUMENT_AIF_DELETE
+
+/*
+ * These macros convert from physical channels to virtual channels
+ */
+#define CONTAINER_CHANNEL (0)
+#define CONTAINER_TO_CHANNEL(cont) (CONTAINER_CHANNEL)
+#define CONTAINER_TO_ID(cont) (cont)
+#define CONTAINER_TO_LUN(cont) (0)
+
+#define PMC_DEVICE_S6 0x28b
+#define PMC_DEVICE_S7 0x28c
+#define PMC_DEVICE_S8 0x28d
+#define PMC_DEVICE_S9 0x28f
+
+#define aac_phys_to_logical(x) ((x)+1)
+#define aac_logical_to_phys(x) ((x)?(x)-1:0)
+
+/* #define AAC_DETAILED_STATUS_INFO */
+
+struct diskparm
+{
+ int heads;
+ int sectors;
+ int cylinders;
+};
+
+
+/*
+ * Firmware constants
+ */
+
+#define CT_NONE 0
+#define CT_OK 218
+#define FT_FILESYS 8 /* ADAPTEC's "FSA"(tm) filesystem */
+#define FT_DRIVE 9 /* physical disk - addressable in scsi by bus/id/lun */
+
+/*
+ * Host side memory scatter gather list
+ * Used by the adapter for read, write, and readdirplus operations
+ * We have separate 32 and 64 bit version because even
+ * on 64 bit systems not all cards support the 64 bit version
+ */
+struct sgentry {
+ __le32 addr; /* 32-bit address. */
+ __le32 count; /* Length. */
+};
+
+struct user_sgentry {
+ u32 addr; /* 32-bit address. */
+ u32 count; /* Length. */
+};
+
+struct sgentry64 {
+ __le32 addr[2]; /* 64-bit addr. 2 pieces for data alignment */
+ __le32 count; /* Length. */
+};
+
+struct user_sgentry64 {
+ u32 addr[2]; /* 64-bit addr. 2 pieces for data alignment */
+ u32 count; /* Length. */
+};
+
+struct sgentryraw {
+ __le32 next; /* reserved for F/W use */
+ __le32 prev; /* reserved for F/W use */
+ __le32 addr[2];
+ __le32 count;
+ __le32 flags; /* reserved for F/W use */
+};
+
+struct user_sgentryraw {
+ u32 next; /* reserved for F/W use */
+ u32 prev; /* reserved for F/W use */
+ u32 addr[2];
+ u32 count;
+ u32 flags; /* reserved for F/W use */
+};
+
+struct sge_ieee1212 {
+ u32 addrLow;
+ u32 addrHigh;
+ u32 length;
+ u32 flags;
+};
+
+/*
+ * SGMAP
+ *
+ * This is the SGMAP structure for all commands that use
+ * 32-bit addressing.
+ */
+
+struct sgmap {
+ __le32 count;
+ struct sgentry sg[1];
+};
+
+struct user_sgmap {
+ u32 count;
+ struct user_sgentry sg[1];
+};
+
+struct sgmap64 {
+ __le32 count;
+ struct sgentry64 sg[1];
+};
+
+struct user_sgmap64 {
+ u32 count;
+ struct user_sgentry64 sg[1];
+};
+
+struct sgmapraw {
+ __le32 count;
+ struct sgentryraw sg[1];
+};
+
+struct user_sgmapraw {
+ u32 count;
+ struct user_sgentryraw sg[1];
+};
+
+struct creation_info
+{
+ u8 buildnum; /* e.g., 588 */
+ u8 usec; /* e.g., 588 */
+ u8 via; /* e.g., 1 = FSU,
+ * 2 = API
+ */
+ u8 year; /* e.g., 1997 = 97 */
+ __le32 date; /*
+ * unsigned Month :4; // 1 - 12
+ * unsigned Day :6; // 1 - 32
+ * unsigned Hour :6; // 0 - 23
+ * unsigned Minute :6; // 0 - 60
+ * unsigned Second :6; // 0 - 60
+ */
+ __le32 serial[2]; /* e.g., 0x1DEADB0BFAFAF001 */
+};
+
+
+/*
+ * Define all the constants needed for the communication interface
+ */
+
+/*
+ * Define how many queue entries each queue will have and the total
+ * number of entries for the entire communication interface. Also define
+ * how many queues we support.
+ *
+ * This has to match the controller
+ */
+
+#define NUMBER_OF_COMM_QUEUES 8 // 4 command; 4 response
+#define HOST_HIGH_CMD_ENTRIES 4
+#define HOST_NORM_CMD_ENTRIES 8
+#define ADAP_HIGH_CMD_ENTRIES 4
+#define ADAP_NORM_CMD_ENTRIES 512
+#define HOST_HIGH_RESP_ENTRIES 4
+#define HOST_NORM_RESP_ENTRIES 512
+#define ADAP_HIGH_RESP_ENTRIES 4
+#define ADAP_NORM_RESP_ENTRIES 8
+
+#define TOTAL_QUEUE_ENTRIES \
+ (HOST_NORM_CMD_ENTRIES + HOST_HIGH_CMD_ENTRIES + ADAP_NORM_CMD_ENTRIES + ADAP_HIGH_CMD_ENTRIES + \
+ HOST_NORM_RESP_ENTRIES + HOST_HIGH_RESP_ENTRIES + ADAP_NORM_RESP_ENTRIES + ADAP_HIGH_RESP_ENTRIES)
+
+
+/*
+ * Set the queues on a 16 byte alignment
+ */
+
+#define QUEUE_ALIGNMENT 16
+
+/*
+ * The queue headers define the Communication Region queues. These
+ * are physically contiguous and accessible by both the adapter and the
+ * host. Even though all queue headers are in the same contiguous block
+ * they will be represented as individual units in the data structures.
+ */
+
+struct aac_entry {
+ __le32 size; /* Size in bytes of Fib which this QE points to */
+ __le32 addr; /* Receiver address of the FIB */
+};
+
+/*
+ * The adapter assumes the ProducerIndex and ConsumerIndex are grouped
+ * adjacently and in that order.
+ */
+
+struct aac_qhdr {
+ __le64 header_addr;/* Address to hand the adapter to access
+ to this queue head */
+ __le32 *producer; /* The producer index for this queue (host address) */
+ __le32 *consumer; /* The consumer index for this queue (host address) */
+};
+
+/*
+ * Define all the events which the adapter would like to notify
+ * the host of.
+ */
+
+#define HostNormCmdQue 1 /* Change in host normal priority command queue */
+#define HostHighCmdQue 2 /* Change in host high priority command queue */
+#define HostNormRespQue 3 /* Change in host normal priority response queue */
+#define HostHighRespQue 4 /* Change in host high priority response queue */
+#define AdapNormRespNotFull 5
+#define AdapHighRespNotFull 6
+#define AdapNormCmdNotFull 7
+#define AdapHighCmdNotFull 8
+#define SynchCommandComplete 9
+#define AdapInternalError 0xfe /* The adapter detected an internal error shutting down */
+
+/*
+ * Define all the events the host wishes to notify the
+ * adapter of. The first four values much match the Qid the
+ * corresponding queue.
+ */
+
+#define AdapNormCmdQue 2
+#define AdapHighCmdQue 3
+#define AdapNormRespQue 6
+#define AdapHighRespQue 7
+#define HostShutdown 8
+#define HostPowerFail 9
+#define FatalCommError 10
+#define HostNormRespNotFull 11
+#define HostHighRespNotFull 12
+#define HostNormCmdNotFull 13
+#define HostHighCmdNotFull 14
+#define FastIo 15
+#define AdapPrintfDone 16
+
+/*
+ * Define all the queues that the adapter and host use to communicate
+ * Number them to match the physical queue layout.
+ */
+
+enum aac_queue_types {
+ HostNormCmdQueue = 0, /* Adapter to host normal priority command traffic */
+ HostHighCmdQueue, /* Adapter to host high priority command traffic */
+ AdapNormCmdQueue, /* Host to adapter normal priority command traffic */
+ AdapHighCmdQueue, /* Host to adapter high priority command traffic */
+ HostNormRespQueue, /* Adapter to host normal priority response traffic */
+ HostHighRespQueue, /* Adapter to host high priority response traffic */
+ AdapNormRespQueue, /* Host to adapter normal priority response traffic */
+ AdapHighRespQueue /* Host to adapter high priority response traffic */
+};
+
+/*
+ * Assign type values to the FSA communication data structures
+ */
+
+#define FIB_MAGIC 0x0001
+#define FIB_MAGIC2 0x0004
+#define FIB_MAGIC2_64 0x0005
+
+/*
+ * Define the priority levels the FSA communication routines support.
+ */
+
+#define FsaNormal 1
+
+/* transport FIB header (PMC) */
+struct aac_fib_xporthdr {
+ u64 HostAddress; /* FIB host address w/o xport header */
+ u32 Size; /* FIB size excluding xport header */
+ u32 Handle; /* driver handle to reference the FIB */
+ u64 Reserved[2];
+};
+
+#define ALIGN32 32
+
+/*
+ * Define the FIB. The FIB is the where all the requested data and
+ * command information are put to the application on the FSA adapter.
+ */
+
+struct aac_fibhdr {
+ __le32 XferState; /* Current transfer state for this CCB */
+ __le16 Command; /* Routing information for the destination */
+ u8 StructType; /* Type FIB */
+ u8 Unused; /* Unused */
+ __le16 Size; /* Size of this FIB in bytes */
+ __le16 SenderSize; /* Size of the FIB in the sender
+ (for response sizing) */
+ __le32 SenderFibAddress; /* Host defined data in the FIB */
+ union {
+ __le32 ReceiverFibAddress;/* Logical address of this FIB for
+ the adapter (old) */
+ __le32 SenderFibAddressHigh;/* upper 32bit of phys. FIB address */
+ __le32 TimeStamp; /* otherwise timestamp for FW internal use */
+ } u;
+ u32 Handle; /* FIB handle used for MSGU commnunication */
+ u32 Previous; /* FW internal use */
+ u32 Next; /* FW internal use */
+};
+
+struct hw_fib {
+ struct aac_fibhdr header;
+ u8 data[512-sizeof(struct aac_fibhdr)]; // Command specific data
+};
+
+/*
+ * FIB commands
+ */
+
+#define TestCommandResponse 1
+#define TestAdapterCommand 2
+/*
+ * Lowlevel and comm commands
+ */
+#define LastTestCommand 100
+#define ReinitHostNormCommandQueue 101
+#define ReinitHostHighCommandQueue 102
+#define ReinitHostHighRespQueue 103
+#define ReinitHostNormRespQueue 104
+#define ReinitAdapNormCommandQueue 105
+#define ReinitAdapHighCommandQueue 107
+#define ReinitAdapHighRespQueue 108
+#define ReinitAdapNormRespQueue 109
+#define InterfaceShutdown 110
+#define DmaCommandFib 120
+#define StartProfile 121
+#define TermProfile 122
+#define SpeedTest 123
+#define TakeABreakPt 124
+#define RequestPerfData 125
+#define SetInterruptDefTimer 126
+#define SetInterruptDefCount 127
+#define GetInterruptDefStatus 128
+#define LastCommCommand 129
+/*
+ * Filesystem commands
+ */
+#define NuFileSystem 300
+#define UFS 301
+#define HostFileSystem 302
+#define LastFileSystemCommand 303
+/*
+ * Container Commands
+ */
+#define ContainerCommand 500
+#define ContainerCommand64 501
+#define ContainerRawIo 502
+#define ContainerRawIo2 503
+/*
+ * Scsi Port commands (scsi passthrough)
+ */
+#define ScsiPortCommand 600
+#define ScsiPortCommand64 601
+/*
+ * Misc house keeping and generic adapter initiated commands
+ */
+#define AifRequest 700
+#define CheckRevision 701
+#define FsaHostShutdown 702
+#define RequestAdapterInfo 703
+#define IsAdapterPaused 704
+#define SendHostTime 705
+#define RequestSupplementAdapterInfo 706
+#define LastMiscCommand 707
+
+/*
+ * Commands that will target the failover level on the FSA adapter
+ */
+
+enum fib_xfer_state {
+ HostOwned = (1<<0),
+ AdapterOwned = (1<<1),
+ FibInitialized = (1<<2),
+ FibEmpty = (1<<3),
+ AllocatedFromPool = (1<<4),
+ SentFromHost = (1<<5),
+ SentFromAdapter = (1<<6),
+ ResponseExpected = (1<<7),
+ NoResponseExpected = (1<<8),
+ AdapterProcessed = (1<<9),
+ HostProcessed = (1<<10),
+ HighPriority = (1<<11),
+ NormalPriority = (1<<12),
+ Async = (1<<13),
+ AsyncIo = (1<<13), // rpbfix: remove with new regime
+ PageFileIo = (1<<14), // rpbfix: remove with new regime
+ ShutdownRequest = (1<<15),
+ LazyWrite = (1<<16), // rpbfix: remove with new regime
+ AdapterMicroFib = (1<<17),
+ BIOSFibPath = (1<<18),
+ FastResponseCapable = (1<<19),
+ ApiFib = (1<<20), /* Its an API Fib */
+ /* PMC NEW COMM: There is no more AIF data pending */
+ NoMoreAifDataAvailable = (1<<21)
+};
+
+/*
+ * The following defines needs to be updated any time there is an
+ * incompatible change made to the aac_init structure.
+ */
+
+#define ADAPTER_INIT_STRUCT_REVISION 3
+#define ADAPTER_INIT_STRUCT_REVISION_4 4 // rocket science
+#define ADAPTER_INIT_STRUCT_REVISION_6 6 /* PMC src */
+#define ADAPTER_INIT_STRUCT_REVISION_7 7 /* Denali */
+
+struct aac_init
+{
+ __le32 InitStructRevision;
+ __le32 Sa_MSIXVectors;
+ __le32 fsrev;
+ __le32 CommHeaderAddress;
+ __le32 FastIoCommAreaAddress;
+ __le32 AdapterFibsPhysicalAddress;
+ __le32 AdapterFibsVirtualAddress;
+ __le32 AdapterFibsSize;
+ __le32 AdapterFibAlign;
+ __le32 printfbuf;
+ __le32 printfbufsiz;
+ __le32 HostPhysMemPages; /* number of 4k pages of host
+ physical memory */
+ __le32 HostElapsedSeconds; /* number of seconds since 1970. */
+ /*
+ * ADAPTER_INIT_STRUCT_REVISION_4 begins here
+ */
+ __le32 InitFlags; /* flags for supported features */
+#define INITFLAGS_NEW_COMM_SUPPORTED 0x00000001
+#define INITFLAGS_DRIVER_USES_UTC_TIME 0x00000010
+#define INITFLAGS_DRIVER_SUPPORTS_PM 0x00000020
+#define INITFLAGS_NEW_COMM_TYPE1_SUPPORTED 0x00000040
+#define INITFLAGS_FAST_JBOD_SUPPORTED 0x00000080
+#define INITFLAGS_NEW_COMM_TYPE2_SUPPORTED 0x00000100
+ __le32 MaxIoCommands; /* max outstanding commands */
+ __le32 MaxIoSize; /* largest I/O command */
+ __le32 MaxFibSize; /* largest FIB to adapter */
+ /* ADAPTER_INIT_STRUCT_REVISION_5 begins here */
+ __le32 MaxNumAif; /* max number of aif */
+ /* ADAPTER_INIT_STRUCT_REVISION_6 begins here */
+ __le32 HostRRQ_AddrLow;
+ __le32 HostRRQ_AddrHigh; /* Host RRQ (response queue) for SRC */
+};
+
+enum aac_log_level {
+ LOG_AAC_INIT = 10,
+ LOG_AAC_INFORMATIONAL = 20,
+ LOG_AAC_WARNING = 30,
+ LOG_AAC_LOW_ERROR = 40,
+ LOG_AAC_MEDIUM_ERROR = 50,
+ LOG_AAC_HIGH_ERROR = 60,
+ LOG_AAC_PANIC = 70,
+ LOG_AAC_DEBUG = 80,
+ LOG_AAC_WINDBG_PRINT = 90
+};
+
+#define FSAFS_NTC_GET_ADAPTER_FIB_CONTEXT 0x030b
+#define FSAFS_NTC_FIB_CONTEXT 0x030c
+
+struct aac_dev;
+struct fib;
+struct scsi_cmnd;
+
+struct adapter_ops
+{
+ /* Low level operations */
+ void (*adapter_interrupt)(struct aac_dev *dev);
+ void (*adapter_notify)(struct aac_dev *dev, u32 event);
+ void (*adapter_disable_int)(struct aac_dev *dev);
+ void (*adapter_enable_int)(struct aac_dev *dev);
+ int (*adapter_sync_cmd)(struct aac_dev *dev, u32 command, u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6, u32 *status, u32 *r1, u32 *r2, u32 *r3, u32 *r4);
+ int (*adapter_check_health)(struct aac_dev *dev);
+ int (*adapter_restart)(struct aac_dev *dev, int bled);
+ /* Transport operations */
+ int (*adapter_ioremap)(struct aac_dev * dev, u32 size);
+ irq_handler_t adapter_intr;
+ /* Packet operations */
+ int (*adapter_deliver)(struct fib * fib);
+ int (*adapter_bounds)(struct aac_dev * dev, struct scsi_cmnd * cmd, u64 lba);
+ int (*adapter_read)(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count);
+ int (*adapter_write)(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count, int fua);
+ int (*adapter_scsi)(struct fib * fib, struct scsi_cmnd * cmd);
+ /* Administrative operations */
+ int (*adapter_comm)(struct aac_dev * dev, int comm);
+};
+
+/*
+ * Define which interrupt handler needs to be installed
+ */
+
+struct aac_driver_ident
+{
+ int (*init)(struct aac_dev *dev);
+ char * name;
+ char * vname;
+ char * model;
+ u16 channels;
+ int quirks;
+};
+/*
+ * Some adapter firmware needs communication memory
+ * below 2gig. This tells the init function to set the
+ * dma mask such that fib memory will be allocated where the
+ * adapter firmware can get to it.
+ */
+#define AAC_QUIRK_31BIT 0x0001
+
+/*
+ * Some adapter firmware, when the raid card's cache is turned off, can not
+ * split up scatter gathers in order to deal with the limits of the
+ * underlying CHIM. This limit is 34 scatter gather elements.
+ */
+#define AAC_QUIRK_34SG 0x0002
+
+/*
+ * This adapter is a slave (no Firmware)
+ */
+#define AAC_QUIRK_SLAVE 0x0004
+
+/*
+ * This adapter is a master.
+ */
+#define AAC_QUIRK_MASTER 0x0008
+
+/*
+ * Some adapter firmware perform poorly when it must split up scatter gathers
+ * in order to deal with the limits of the underlying CHIM. This limit in this
+ * class of adapters is 17 scatter gather elements.
+ */
+#define AAC_QUIRK_17SG 0x0010
+
+/*
+ * Some adapter firmware does not support 64 bit scsi passthrough
+ * commands.
+ */
+#define AAC_QUIRK_SCSI_32 0x0020
+
+/*
+ * The adapter interface specs all queues to be located in the same
+ * physically contiguous block. The host structure that defines the
+ * commuication queues will assume they are each a separate physically
+ * contiguous memory region that will support them all being one big
+ * contiguous block.
+ * There is a command and response queue for each level and direction of
+ * commuication. These regions are accessed by both the host and adapter.
+ */
+
+struct aac_queue {
+ u64 logical; /*address we give the adapter */
+ struct aac_entry *base; /*system virtual address */
+ struct aac_qhdr headers; /*producer,consumer q headers*/
+ u32 entries; /*Number of queue entries */
+ wait_queue_head_t qfull; /*Event to wait on if q full */
+ wait_queue_head_t cmdready; /*Cmd ready from the adapter */
+ /* This is only valid for adapter to host command queues. */
+ spinlock_t *lock; /* Spinlock for this queue must take this lock before accessing the lock */
+ spinlock_t lockdata; /* Actual lock (used only on one side of the lock) */
+ struct list_head cmdq; /* A queue of FIBs which need to be prcessed by the FS thread. This is */
+ /* only valid for command queues which receive entries from the adapter. */
+ /* Number of entries on outstanding queue. */
+ atomic_t numpending;
+ struct aac_dev * dev; /* Back pointer to adapter structure */
+};
+
+/*
+ * Message queues. The order here is important, see also the
+ * queue type ordering
+ */
+
+struct aac_queue_block
+{
+ struct aac_queue queue[8];
+};
+
+/*
+ * SaP1 Message Unit Registers
+ */
+
+struct sa_drawbridge_CSR {
+ /* Offset | Name */
+ __le32 reserved[10]; /* 00h-27h | Reserved */
+ u8 LUT_Offset; /* 28h | Lookup Table Offset */
+ u8 reserved1[3]; /* 29h-2bh | Reserved */
+ __le32 LUT_Data; /* 2ch | Looup Table Data */
+ __le32 reserved2[26]; /* 30h-97h | Reserved */
+ __le16 PRICLEARIRQ; /* 98h | Primary Clear Irq */
+ __le16 SECCLEARIRQ; /* 9ah | Secondary Clear Irq */
+ __le16 PRISETIRQ; /* 9ch | Primary Set Irq */
+ __le16 SECSETIRQ; /* 9eh | Secondary Set Irq */
+ __le16 PRICLEARIRQMASK;/* a0h | Primary Clear Irq Mask */
+ __le16 SECCLEARIRQMASK;/* a2h | Secondary Clear Irq Mask */
+ __le16 PRISETIRQMASK; /* a4h | Primary Set Irq Mask */
+ __le16 SECSETIRQMASK; /* a6h | Secondary Set Irq Mask */
+ __le32 MAILBOX0; /* a8h | Scratchpad 0 */
+ __le32 MAILBOX1; /* ach | Scratchpad 1 */
+ __le32 MAILBOX2; /* b0h | Scratchpad 2 */
+ __le32 MAILBOX3; /* b4h | Scratchpad 3 */
+ __le32 MAILBOX4; /* b8h | Scratchpad 4 */
+ __le32 MAILBOX5; /* bch | Scratchpad 5 */
+ __le32 MAILBOX6; /* c0h | Scratchpad 6 */
+ __le32 MAILBOX7; /* c4h | Scratchpad 7 */
+ __le32 ROM_Setup_Data; /* c8h | Rom Setup and Data */
+ __le32 ROM_Control_Addr;/* cch | Rom Control and Address */
+ __le32 reserved3[12]; /* d0h-ffh | reserved */
+ __le32 LUT[64]; /* 100h-1ffh | Lookup Table Entries */
+};
+
+#define Mailbox0 SaDbCSR.MAILBOX0
+#define Mailbox1 SaDbCSR.MAILBOX1
+#define Mailbox2 SaDbCSR.MAILBOX2
+#define Mailbox3 SaDbCSR.MAILBOX3
+#define Mailbox4 SaDbCSR.MAILBOX4
+#define Mailbox5 SaDbCSR.MAILBOX5
+#define Mailbox6 SaDbCSR.MAILBOX6
+#define Mailbox7 SaDbCSR.MAILBOX7
+
+#define DoorbellReg_p SaDbCSR.PRISETIRQ
+#define DoorbellReg_s SaDbCSR.SECSETIRQ
+#define DoorbellClrReg_p SaDbCSR.PRICLEARIRQ
+
+
+#define DOORBELL_0 0x0001
+#define DOORBELL_1 0x0002
+#define DOORBELL_2 0x0004
+#define DOORBELL_3 0x0008
+#define DOORBELL_4 0x0010
+#define DOORBELL_5 0x0020
+#define DOORBELL_6 0x0040
+
+
+#define PrintfReady DOORBELL_5
+#define PrintfDone DOORBELL_5
+
+struct sa_registers {
+ struct sa_drawbridge_CSR SaDbCSR; /* 98h - c4h */
+};
+
+
+#define Sa_MINIPORT_REVISION 1
+
+#define sa_readw(AEP, CSR) readl(&((AEP)->regs.sa->CSR))
+#define sa_readl(AEP, CSR) readl(&((AEP)->regs.sa->CSR))
+#define sa_writew(AEP, CSR, value) writew(value, &((AEP)->regs.sa->CSR))
+#define sa_writel(AEP, CSR, value) writel(value, &((AEP)->regs.sa->CSR))
+
+/*
+ * Rx Message Unit Registers
+ */
+
+struct rx_mu_registers {
+ /* Local | PCI*| Name */
+ __le32 ARSR; /* 1300h | 00h | APIC Register Select Register */
+ __le32 reserved0; /* 1304h | 04h | Reserved */
+ __le32 AWR; /* 1308h | 08h | APIC Window Register */
+ __le32 reserved1; /* 130Ch | 0Ch | Reserved */
+ __le32 IMRx[2]; /* 1310h | 10h | Inbound Message Registers */
+ __le32 OMRx[2]; /* 1318h | 18h | Outbound Message Registers */
+ __le32 IDR; /* 1320h | 20h | Inbound Doorbell Register */
+ __le32 IISR; /* 1324h | 24h | Inbound Interrupt
+ Status Register */
+ __le32 IIMR; /* 1328h | 28h | Inbound Interrupt
+ Mask Register */
+ __le32 ODR; /* 132Ch | 2Ch | Outbound Doorbell Register */
+ __le32 OISR; /* 1330h | 30h | Outbound Interrupt
+ Status Register */
+ __le32 OIMR; /* 1334h | 34h | Outbound Interrupt
+ Mask Register */
+ __le32 reserved2; /* 1338h | 38h | Reserved */
+ __le32 reserved3; /* 133Ch | 3Ch | Reserved */
+ __le32 InboundQueue;/* 1340h | 40h | Inbound Queue Port relative to firmware */
+ __le32 OutboundQueue;/*1344h | 44h | Outbound Queue Port relative to firmware */
+ /* * Must access through ATU Inbound
+ Translation Window */
+};
+
+struct rx_inbound {
+ __le32 Mailbox[8];
+};
+
+#define INBOUNDDOORBELL_0 0x00000001
+#define INBOUNDDOORBELL_1 0x00000002
+#define INBOUNDDOORBELL_2 0x00000004
+#define INBOUNDDOORBELL_3 0x00000008
+#define INBOUNDDOORBELL_4 0x00000010
+#define INBOUNDDOORBELL_5 0x00000020
+#define INBOUNDDOORBELL_6 0x00000040
+
+#define OUTBOUNDDOORBELL_0 0x00000001
+#define OUTBOUNDDOORBELL_1 0x00000002
+#define OUTBOUNDDOORBELL_2 0x00000004
+#define OUTBOUNDDOORBELL_3 0x00000008
+#define OUTBOUNDDOORBELL_4 0x00000010
+
+#define InboundDoorbellReg MUnit.IDR
+#define OutboundDoorbellReg MUnit.ODR
+
+struct rx_registers {
+ struct rx_mu_registers MUnit; /* 1300h - 1347h */
+ __le32 reserved1[2]; /* 1348h - 134ch */
+ struct rx_inbound IndexRegs;
+};
+
+#define rx_readb(AEP, CSR) readb(&((AEP)->regs.rx->CSR))
+#define rx_readl(AEP, CSR) readl(&((AEP)->regs.rx->CSR))
+#define rx_writeb(AEP, CSR, value) writeb(value, &((AEP)->regs.rx->CSR))
+#define rx_writel(AEP, CSR, value) writel(value, &((AEP)->regs.rx->CSR))
+
+/*
+ * Rkt Message Unit Registers (same as Rx, except a larger reserve region)
+ */
+
+#define rkt_mu_registers rx_mu_registers
+#define rkt_inbound rx_inbound
+
+struct rkt_registers {
+ struct rkt_mu_registers MUnit; /* 1300h - 1347h */
+ __le32 reserved1[1006]; /* 1348h - 22fch */
+ struct rkt_inbound IndexRegs; /* 2300h - */
+};
+
+#define rkt_readb(AEP, CSR) readb(&((AEP)->regs.rkt->CSR))
+#define rkt_readl(AEP, CSR) readl(&((AEP)->regs.rkt->CSR))
+#define rkt_writeb(AEP, CSR, value) writeb(value, &((AEP)->regs.rkt->CSR))
+#define rkt_writel(AEP, CSR, value) writel(value, &((AEP)->regs.rkt->CSR))
+
+/*
+ * PMC SRC message unit registers
+ */
+
+#define src_inbound rx_inbound
+
+struct src_mu_registers {
+ /* PCI*| Name */
+ __le32 reserved0[6]; /* 00h | Reserved */
+ __le32 IOAR[2]; /* 18h | IOA->host interrupt register */
+ __le32 IDR; /* 20h | Inbound Doorbell Register */
+ __le32 IISR; /* 24h | Inbound Int. Status Register */
+ __le32 reserved1[3]; /* 28h | Reserved */
+ __le32 OIMR; /* 34h | Outbound Int. Mask Register */
+ __le32 reserved2[25]; /* 38h | Reserved */
+ __le32 ODR_R; /* 9ch | Outbound Doorbell Read */
+ __le32 ODR_C; /* a0h | Outbound Doorbell Clear */
+ __le32 reserved3[6]; /* a4h | Reserved */
+ __le32 OMR; /* bch | Outbound Message Register */
+ __le32 IQ_L; /* c0h | Inbound Queue (Low address) */
+ __le32 IQ_H; /* c4h | Inbound Queue (High address) */
+ __le32 ODR_MSI; /* c8h | MSI register for sync./AIF */
+};
+
+struct src_registers {
+ struct src_mu_registers MUnit; /* 00h - cbh */
+ union {
+ struct {
+ __le32 reserved1[130789]; /* cch - 7fc5fh */
+ struct src_inbound IndexRegs; /* 7fc60h */
+ } tupelo;
+ struct {
+ __le32 reserved1[973]; /* cch - fffh */
+ struct src_inbound IndexRegs; /* 1000h */
+ } denali;
+ } u;
+};
+
+#define src_readb(AEP, CSR) readb(&((AEP)->regs.src.bar0->CSR))
+#define src_readl(AEP, CSR) readl(&((AEP)->regs.src.bar0->CSR))
+#define src_writeb(AEP, CSR, value) writeb(value, \
+ &((AEP)->regs.src.bar0->CSR))
+#define src_writel(AEP, CSR, value) writel(value, \
+ &((AEP)->regs.src.bar0->CSR))
+
+#define SRC_ODR_SHIFT 12
+#define SRC_IDR_SHIFT 9
+
+typedef void (*fib_callback)(void *ctxt, struct fib *fibctx);
+
+struct aac_fib_context {
+ s16 type; // used for verification of structure
+ s16 size;
+ u32 unique; // unique value representing this context
+ ulong jiffies; // used for cleanup - dmb changed to ulong
+ struct list_head next; // used to link context's into a linked list
+ struct semaphore wait_sem; // this is used to wait for the next fib to arrive.
+ int wait; // Set to true when thread is in WaitForSingleObject
+ unsigned long count; // total number of FIBs on FibList
+ struct list_head fib_list; // this holds fibs and their attachd hw_fibs
+};
+
+struct sense_data {
+ u8 error_code; /* 70h (current errors), 71h(deferred errors) */
+ u8 valid:1; /* A valid bit of one indicates that the information */
+ /* field contains valid information as defined in the
+ * SCSI-2 Standard.
+ */
+ u8 segment_number; /* Only used for COPY, COMPARE, or COPY AND VERIFY Commands */
+ u8 sense_key:4; /* Sense Key */
+ u8 reserved:1;
+ u8 ILI:1; /* Incorrect Length Indicator */
+ u8 EOM:1; /* End Of Medium - reserved for random access devices */
+ u8 filemark:1; /* Filemark - reserved for random access devices */
+
+ u8 information[4]; /* for direct-access devices, contains the unsigned
+ * logical block address or residue associated with
+ * the sense key
+ */
+ u8 add_sense_len; /* number of additional sense bytes to follow this field */
+ u8 cmnd_info[4]; /* not used */
+ u8 ASC; /* Additional Sense Code */
+ u8 ASCQ; /* Additional Sense Code Qualifier */
+ u8 FRUC; /* Field Replaceable Unit Code - not used */
+ u8 bit_ptr:3; /* indicates which byte of the CDB or parameter data
+ * was in error
+ */
+ u8 BPV:1; /* bit pointer valid (BPV): 1- indicates that
+ * the bit_ptr field has valid value
+ */
+ u8 reserved2:2;
+ u8 CD:1; /* command data bit: 1- illegal parameter in CDB.
+ * 0- illegal parameter in data.
+ */
+ u8 SKSV:1;
+ u8 field_ptr[2]; /* byte of the CDB or parameter data in error */
+};
+
+struct fsa_dev_info {
+ u64 last;
+ u64 size;
+ u32 type;
+ u32 config_waiting_on;
+ unsigned long config_waiting_stamp;
+ u16 queue_depth;
+ u8 config_needed;
+ u8 valid;
+ u8 ro;
+ u8 locked;
+ u8 deleted;
+ char devname[8];
+ struct sense_data sense_data;
+ u32 block_size;
+};
+
+struct fib {
+ void *next; /* this is used by the allocator */
+ s16 type;
+ s16 size;
+ /*
+ * The Adapter that this I/O is destined for.
+ */
+ struct aac_dev *dev;
+ /*
+ * This is the event the sendfib routine will wait on if the
+ * caller did not pass one and this is synch io.
+ */
+ struct semaphore event_wait;
+ spinlock_t event_lock;
+
+ u32 done; /* gets set to 1 when fib is complete */
+ fib_callback callback;
+ void *callback_data;
+ u32 flags; // u32 dmb was ulong
+ /*
+ * And for the internal issue/reply queues (we may be able
+ * to merge these two)
+ */
+ struct list_head fiblink;
+ void *data;
+ struct hw_fib *hw_fib_va; /* Actual shared object */
+ dma_addr_t hw_fib_pa; /* physical address of hw_fib*/
+};
+
+/*
+ * Adapter Information Block
+ *
+ * This is returned by the RequestAdapterInfo block
+ */
+
+struct aac_adapter_info
+{
+ __le32 platform;
+ __le32 cpu;
+ __le32 subcpu;
+ __le32 clock;
+ __le32 execmem;
+ __le32 buffermem;
+ __le32 totalmem;
+ __le32 kernelrev;
+ __le32 kernelbuild;
+ __le32 monitorrev;
+ __le32 monitorbuild;
+ __le32 hwrev;
+ __le32 hwbuild;
+ __le32 biosrev;
+ __le32 biosbuild;
+ __le32 cluster;
+ __le32 clusterchannelmask;
+ __le32 serial[2];
+ __le32 battery;
+ __le32 options;
+ __le32 OEM;
+};
+
+struct aac_supplement_adapter_info
+{
+ u8 AdapterTypeText[17+1];
+ u8 Pad[2];
+ __le32 FlashMemoryByteSize;
+ __le32 FlashImageId;
+ __le32 MaxNumberPorts;
+ __le32 Version;
+ __le32 FeatureBits;
+ u8 SlotNumber;
+ u8 ReservedPad0[3];
+ u8 BuildDate[12];
+ __le32 CurrentNumberPorts;
+ struct {
+ u8 AssemblyPn[8];
+ u8 FruPn[8];
+ u8 BatteryFruPn[8];
+ u8 EcVersionString[8];
+ u8 Tsid[12];
+ } VpdInfo;
+ __le32 FlashFirmwareRevision;
+ __le32 FlashFirmwareBuild;
+ __le32 RaidTypeMorphOptions;
+ __le32 FlashFirmwareBootRevision;
+ __le32 FlashFirmwareBootBuild;
+ u8 MfgPcbaSerialNo[12];
+ u8 MfgWWNName[8];
+ __le32 SupportedOptions2;
+ __le32 StructExpansion;
+ /* StructExpansion == 1 */
+ __le32 FeatureBits3;
+ __le32 SupportedPerformanceModes;
+ __le32 ReservedForFutureGrowth[80];
+};
+#define AAC_FEATURE_FALCON cpu_to_le32(0x00000010)
+#define AAC_FEATURE_JBOD cpu_to_le32(0x08000000)
+/* SupportedOptions2 */
+#define AAC_OPTION_MU_RESET cpu_to_le32(0x00000001)
+#define AAC_OPTION_IGNORE_RESET cpu_to_le32(0x00000002)
+#define AAC_OPTION_POWER_MANAGEMENT cpu_to_le32(0x00000004)
+#define AAC_OPTION_DOORBELL_RESET cpu_to_le32(0x00004000)
+/* 4KB sector size */
+#define AAC_OPTION_VARIABLE_BLOCK_SIZE cpu_to_le32(0x00040000)
+/* 240 simple volume support */
+#define AAC_OPTION_SUPPORTED_240_VOLUMES cpu_to_le32(0x10000000)
+#define AAC_SIS_VERSION_V3 3
+#define AAC_SIS_SLOT_UNKNOWN 0xFF
+
+#define GetBusInfo 0x00000009
+struct aac_bus_info {
+ __le32 Command; /* VM_Ioctl */
+ __le32 ObjType; /* FT_DRIVE */
+ __le32 MethodId; /* 1 = SCSI Layer */
+ __le32 ObjectId; /* Handle */
+ __le32 CtlCmd; /* GetBusInfo */
+};
+
+struct aac_bus_info_response {
+ __le32 Status; /* ST_OK */
+ __le32 ObjType;
+ __le32 MethodId; /* unused */
+ __le32 ObjectId; /* unused */
+ __le32 CtlCmd; /* unused */
+ __le32 ProbeComplete;
+ __le32 BusCount;
+ __le32 TargetsPerBus;
+ u8 InitiatorBusId[10];
+ u8 BusValid[10];
+};
+
+/*
+ * Battery platforms
+ */
+#define AAC_BAT_REQ_PRESENT (1)
+#define AAC_BAT_REQ_NOTPRESENT (2)
+#define AAC_BAT_OPT_PRESENT (3)
+#define AAC_BAT_OPT_NOTPRESENT (4)
+#define AAC_BAT_NOT_SUPPORTED (5)
+/*
+ * cpu types
+ */
+#define AAC_CPU_SIMULATOR (1)
+#define AAC_CPU_I960 (2)
+#define AAC_CPU_STRONGARM (3)
+
+/*
+ * Supported Options
+ */
+#define AAC_OPT_SNAPSHOT cpu_to_le32(1)
+#define AAC_OPT_CLUSTERS cpu_to_le32(1<<1)
+#define AAC_OPT_WRITE_CACHE cpu_to_le32(1<<2)
+#define AAC_OPT_64BIT_DATA cpu_to_le32(1<<3)
+#define AAC_OPT_HOST_TIME_FIB cpu_to_le32(1<<4)
+#define AAC_OPT_RAID50 cpu_to_le32(1<<5)
+#define AAC_OPT_4GB_WINDOW cpu_to_le32(1<<6)
+#define AAC_OPT_SCSI_UPGRADEABLE cpu_to_le32(1<<7)
+#define AAC_OPT_SOFT_ERR_REPORT cpu_to_le32(1<<8)
+#define AAC_OPT_SUPPORTED_RECONDITION cpu_to_le32(1<<9)
+#define AAC_OPT_SGMAP_HOST64 cpu_to_le32(1<<10)
+#define AAC_OPT_ALARM cpu_to_le32(1<<11)
+#define AAC_OPT_NONDASD cpu_to_le32(1<<12)
+#define AAC_OPT_SCSI_MANAGED cpu_to_le32(1<<13)
+#define AAC_OPT_RAID_SCSI_MODE cpu_to_le32(1<<14)
+#define AAC_OPT_SUPPLEMENT_ADAPTER_INFO cpu_to_le32(1<<16)
+#define AAC_OPT_NEW_COMM cpu_to_le32(1<<17)
+#define AAC_OPT_NEW_COMM_64 cpu_to_le32(1<<18)
+#define AAC_OPT_NEW_COMM_TYPE1 cpu_to_le32(1<<28)
+#define AAC_OPT_NEW_COMM_TYPE2 cpu_to_le32(1<<29)
+#define AAC_OPT_NEW_COMM_TYPE3 cpu_to_le32(1<<30)
+#define AAC_OPT_NEW_COMM_TYPE4 cpu_to_le32(1<<31)
+
+/* MSIX context */
+struct aac_msix_ctx {
+ int vector_no;
+ struct aac_dev *dev;
+};
+
+struct aac_dev
+{
+ struct list_head entry;
+ const char *name;
+ int id;
+
+ /*
+ * negotiated FIB settings
+ */
+ unsigned max_fib_size;
+ unsigned sg_tablesize;
+ unsigned max_num_aif;
+
+ /*
+ * Map for 128 fib objects (64k)
+ */
+ dma_addr_t hw_fib_pa;
+ struct hw_fib *hw_fib_va;
+ struct hw_fib *aif_base_va;
+ /*
+ * Fib Headers
+ */
+ struct fib *fibs;
+
+ struct fib *free_fib;
+ spinlock_t fib_lock;
+
+ struct aac_queue_block *queues;
+ /*
+ * The user API will use an IOCTL to register itself to receive
+ * FIBs from the adapter. The following list is used to keep
+ * track of all the threads that have requested these FIBs. The
+ * mutex is used to synchronize access to all data associated
+ * with the adapter fibs.
+ */
+ struct list_head fib_list;
+
+ struct adapter_ops a_ops;
+ unsigned long fsrev; /* Main driver's revision number */
+
+ resource_size_t base_start; /* main IO base */
+ resource_size_t dbg_base; /* address of UART
+ * debug buffer */
+
+ resource_size_t base_size, dbg_size; /* Size of
+ * mapped in region */
+
+ struct aac_init *init; /* Holds initialization info to communicate with adapter */
+ dma_addr_t init_pa; /* Holds physical address of the init struct */
+
+ u32 *host_rrq; /* response queue
+ * if AAC_COMM_MESSAGE_TYPE1 */
+
+ dma_addr_t host_rrq_pa; /* phys. address */
+ /* index into rrq buffer */
+ u32 host_rrq_idx[AAC_MAX_MSIX];
+ atomic_t rrq_outstanding[AAC_MAX_MSIX];
+ u32 fibs_pushed_no;
+ struct pci_dev *pdev; /* Our PCI interface */
+ void * printfbuf; /* pointer to buffer used for printf's from the adapter */
+ void * comm_addr; /* Base address of Comm area */
+ dma_addr_t comm_phys; /* Physical Address of Comm area */
+ size_t comm_size;
+
+ struct Scsi_Host *scsi_host_ptr;
+ int maximum_num_containers;
+ int maximum_num_physicals;
+ int maximum_num_channels;
+ struct fsa_dev_info *fsa_dev;
+ struct task_struct *thread;
+ int cardtype;
+
+ /*
+ * The following is the device specific extension.
+ */
+#ifndef AAC_MIN_FOOTPRINT_SIZE
+# define AAC_MIN_FOOTPRINT_SIZE 8192
+# define AAC_MIN_SRC_BAR0_SIZE 0x400000
+# define AAC_MIN_SRC_BAR1_SIZE 0x800
+# define AAC_MIN_SRCV_BAR0_SIZE 0x100000
+# define AAC_MIN_SRCV_BAR1_SIZE 0x400
+#endif
+ union
+ {
+ struct sa_registers __iomem *sa;
+ struct rx_registers __iomem *rx;
+ struct rkt_registers __iomem *rkt;
+ struct {
+ struct src_registers __iomem *bar0;
+ char __iomem *bar1;
+ } src;
+ } regs;
+ volatile void __iomem *base, *dbg_base_mapped;
+ volatile struct rx_inbound __iomem *IndexRegs;
+ u32 OIMR; /* Mask Register Cache */
+ /*
+ * AIF thread states
+ */
+ u32 aif_thread;
+ struct aac_adapter_info adapter_info;
+ struct aac_supplement_adapter_info supplement_adapter_info;
+ /* These are in adapter info but they are in the io flow so
+ * lets break them out so we don't have to do an AND to check them
+ */
+ u8 nondasd_support;
+ u8 jbod;
+ u8 cache_protected;
+ u8 dac_support;
+ u8 needs_dac;
+ u8 raid_scsi_mode;
+ u8 comm_interface;
+# define AAC_COMM_PRODUCER 0
+# define AAC_COMM_MESSAGE 1
+# define AAC_COMM_MESSAGE_TYPE1 3
+# define AAC_COMM_MESSAGE_TYPE2 4
+ u8 raw_io_interface;
+ u8 raw_io_64;
+ u8 printf_enabled;
+ u8 in_reset;
+ u8 msi;
+ int management_fib_count;
+ spinlock_t manage_lock;
+ spinlock_t sync_lock;
+ int sync_mode;
+ struct fib *sync_fib;
+ struct list_head sync_fib_list;
+ u32 doorbell_mask;
+ u32 max_msix; /* max. MSI-X vectors */
+ u32 vector_cap; /* MSI-X vector capab.*/
+ int msi_enabled; /* MSI/MSI-X enabled */
+ struct msix_entry msixentry[AAC_MAX_MSIX];
+ struct aac_msix_ctx aac_msix[AAC_MAX_MSIX]; /* context */
+ u8 adapter_shutdown;
+};
+
+#define aac_adapter_interrupt(dev) \
+ (dev)->a_ops.adapter_interrupt(dev)
+
+#define aac_adapter_notify(dev, event) \
+ (dev)->a_ops.adapter_notify(dev, event)
+
+#define aac_adapter_disable_int(dev) \
+ (dev)->a_ops.adapter_disable_int(dev)
+
+#define aac_adapter_enable_int(dev) \
+ (dev)->a_ops.adapter_enable_int(dev)
+
+#define aac_adapter_sync_cmd(dev, command, p1, p2, p3, p4, p5, p6, status, r1, r2, r3, r4) \
+ (dev)->a_ops.adapter_sync_cmd(dev, command, p1, p2, p3, p4, p5, p6, status, r1, r2, r3, r4)
+
+#define aac_adapter_check_health(dev) \
+ (dev)->a_ops.adapter_check_health(dev)
+
+#define aac_adapter_restart(dev,bled) \
+ (dev)->a_ops.adapter_restart(dev,bled)
+
+#define aac_adapter_ioremap(dev, size) \
+ (dev)->a_ops.adapter_ioremap(dev, size)
+
+#define aac_adapter_deliver(fib) \
+ ((fib)->dev)->a_ops.adapter_deliver(fib)
+
+#define aac_adapter_bounds(dev,cmd,lba) \
+ dev->a_ops.adapter_bounds(dev,cmd,lba)
+
+#define aac_adapter_read(fib,cmd,lba,count) \
+ ((fib)->dev)->a_ops.adapter_read(fib,cmd,lba,count)
+
+#define aac_adapter_write(fib,cmd,lba,count,fua) \
+ ((fib)->dev)->a_ops.adapter_write(fib,cmd,lba,count,fua)
+
+#define aac_adapter_scsi(fib,cmd) \
+ ((fib)->dev)->a_ops.adapter_scsi(fib,cmd)
+
+#define aac_adapter_comm(dev,comm) \
+ (dev)->a_ops.adapter_comm(dev, comm)
+
+#define FIB_CONTEXT_FLAG_TIMED_OUT (0x00000001)
+#define FIB_CONTEXT_FLAG (0x00000002)
+#define FIB_CONTEXT_FLAG_WAIT (0x00000004)
+#define FIB_CONTEXT_FLAG_FASTRESP (0x00000008)
+
+/*
+ * Define the command values
+ */
+
+#define Null 0
+#define GetAttributes 1
+#define SetAttributes 2
+#define Lookup 3
+#define ReadLink 4
+#define Read 5
+#define Write 6
+#define Create 7
+#define MakeDirectory 8
+#define SymbolicLink 9
+#define MakeNode 10
+#define Removex 11
+#define RemoveDirectoryx 12
+#define Rename 13
+#define Link 14
+#define ReadDirectory 15
+#define ReadDirectoryPlus 16
+#define FileSystemStatus 17
+#define FileSystemInfo 18
+#define PathConfigure 19
+#define Commit 20
+#define Mount 21
+#define UnMount 22
+#define Newfs 23
+#define FsCheck 24
+#define FsSync 25
+#define SimReadWrite 26
+#define SetFileSystemStatus 27
+#define BlockRead 28
+#define BlockWrite 29
+#define NvramIoctl 30
+#define FsSyncWait 31
+#define ClearArchiveBit 32
+#define SetAcl 33
+#define GetAcl 34
+#define AssignAcl 35
+#define FaultInsertion 36 /* Fault Insertion Command */
+#define CrazyCache 37 /* Crazycache */
+
+#define MAX_FSACOMMAND_NUM 38
+
+
+/*
+ * Define the status returns. These are very unixlike although
+ * most are not in fact used
+ */
+
+#define ST_OK 0
+#define ST_PERM 1
+#define ST_NOENT 2
+#define ST_IO 5
+#define ST_NXIO 6
+#define ST_E2BIG 7
+#define ST_ACCES 13
+#define ST_EXIST 17
+#define ST_XDEV 18
+#define ST_NODEV 19
+#define ST_NOTDIR 20
+#define ST_ISDIR 21
+#define ST_INVAL 22
+#define ST_FBIG 27
+#define ST_NOSPC 28
+#define ST_ROFS 30
+#define ST_MLINK 31
+#define ST_WOULDBLOCK 35
+#define ST_NAMETOOLONG 63
+#define ST_NOTEMPTY 66
+#define ST_DQUOT 69
+#define ST_STALE 70
+#define ST_REMOTE 71
+#define ST_NOT_READY 72
+#define ST_BADHANDLE 10001
+#define ST_NOT_SYNC 10002
+#define ST_BAD_COOKIE 10003
+#define ST_NOTSUPP 10004
+#define ST_TOOSMALL 10005
+#define ST_SERVERFAULT 10006
+#define ST_BADTYPE 10007
+#define ST_JUKEBOX 10008
+#define ST_NOTMOUNTED 10009
+#define ST_MAINTMODE 10010
+#define ST_STALEACL 10011
+
+/*
+ * On writes how does the client want the data written.
+ */
+
+#define CACHE_CSTABLE 1
+#define CACHE_UNSTABLE 2
+
+/*
+ * Lets the client know at which level the data was committed on
+ * a write request
+ */
+
+#define CMFILE_SYNCH_NVRAM 1
+#define CMDATA_SYNCH_NVRAM 2
+#define CMFILE_SYNCH 3
+#define CMDATA_SYNCH 4
+#define CMUNSTABLE 5
+
+#define RIO_TYPE_WRITE 0x0000
+#define RIO_TYPE_READ 0x0001
+#define RIO_SUREWRITE 0x0008
+
+#define RIO2_IO_TYPE 0x0003
+#define RIO2_IO_TYPE_WRITE 0x0000
+#define RIO2_IO_TYPE_READ 0x0001
+#define RIO2_IO_TYPE_VERIFY 0x0002
+#define RIO2_IO_ERROR 0x0004
+#define RIO2_IO_SUREWRITE 0x0008
+#define RIO2_SGL_CONFORMANT 0x0010
+#define RIO2_SG_FORMAT 0xF000
+#define RIO2_SG_FORMAT_ARC 0x0000
+#define RIO2_SG_FORMAT_SRL 0x1000
+#define RIO2_SG_FORMAT_IEEE1212 0x2000
+
+struct aac_read
+{
+ __le32 command;
+ __le32 cid;
+ __le32 block;
+ __le32 count;
+ struct sgmap sg; // Must be last in struct because it is variable
+};
+
+struct aac_read64
+{
+ __le32 command;
+ __le16 cid;
+ __le16 sector_count;
+ __le32 block;
+ __le16 pad;
+ __le16 flags;
+ struct sgmap64 sg; // Must be last in struct because it is variable
+};
+
+struct aac_read_reply
+{
+ __le32 status;
+ __le32 count;
+};
+
+struct aac_write
+{
+ __le32 command;
+ __le32 cid;
+ __le32 block;
+ __le32 count;
+ __le32 stable; // Not used
+ struct sgmap sg; // Must be last in struct because it is variable
+};
+
+struct aac_write64
+{
+ __le32 command;
+ __le16 cid;
+ __le16 sector_count;
+ __le32 block;
+ __le16 pad;
+ __le16 flags;
+ struct sgmap64 sg; // Must be last in struct because it is variable
+};
+struct aac_write_reply
+{
+ __le32 status;
+ __le32 count;
+ __le32 committed;
+};
+
+struct aac_raw_io
+{
+ __le32 block[2];
+ __le32 count;
+ __le16 cid;
+ __le16 flags; /* 00 W, 01 R */
+ __le16 bpTotal; /* reserved for F/W use */
+ __le16 bpComplete; /* reserved for F/W use */
+ struct sgmapraw sg;
+};
+
+struct aac_raw_io2 {
+ __le32 blockLow;
+ __le32 blockHigh;
+ __le32 byteCount;
+ __le16 cid;
+ __le16 flags; /* RIO2 flags */
+ __le32 sgeFirstSize; /* size of first sge el. */
+ __le32 sgeNominalSize; /* size of 2nd sge el. (if conformant) */
+ u8 sgeCnt; /* only 8 bits required */
+ u8 bpTotal; /* reserved for F/W use */
+ u8 bpComplete; /* reserved for F/W use */
+ u8 sgeFirstIndex; /* reserved for F/W use */
+ u8 unused[4];
+ struct sge_ieee1212 sge[1];
+};
+
+#define CT_FLUSH_CACHE 129
+struct aac_synchronize {
+ __le32 command; /* VM_ContainerConfig */
+ __le32 type; /* CT_FLUSH_CACHE */
+ __le32 cid;
+ __le32 parm1;
+ __le32 parm2;
+ __le32 parm3;
+ __le32 parm4;
+ __le32 count; /* sizeof(((struct aac_synchronize_reply *)NULL)->data) */
+};
+
+struct aac_synchronize_reply {
+ __le32 dummy0;
+ __le32 dummy1;
+ __le32 status; /* CT_OK */
+ __le32 parm1;
+ __le32 parm2;
+ __le32 parm3;
+ __le32 parm4;
+ __le32 parm5;
+ u8 data[16];
+};
+
+#define CT_POWER_MANAGEMENT 245
+#define CT_PM_START_UNIT 2
+#define CT_PM_STOP_UNIT 3
+#define CT_PM_UNIT_IMMEDIATE 1
+struct aac_power_management {
+ __le32 command; /* VM_ContainerConfig */
+ __le32 type; /* CT_POWER_MANAGEMENT */
+ __le32 sub; /* CT_PM_* */
+ __le32 cid;
+ __le32 parm; /* CT_PM_sub_* */
+};
+
+#define CT_PAUSE_IO 65
+#define CT_RELEASE_IO 66
+struct aac_pause {
+ __le32 command; /* VM_ContainerConfig */
+ __le32 type; /* CT_PAUSE_IO */
+ __le32 timeout; /* 10ms ticks */
+ __le32 min;
+ __le32 noRescan;
+ __le32 parm3;
+ __le32 parm4;
+ __le32 count; /* sizeof(((struct aac_pause_reply *)NULL)->data) */
+};
+
+struct aac_srb
+{
+ __le32 function;
+ __le32 channel;
+ __le32 id;
+ __le32 lun;
+ __le32 timeout;
+ __le32 flags;
+ __le32 count; // Data xfer size
+ __le32 retry_limit;
+ __le32 cdb_size;
+ u8 cdb[16];
+ struct sgmap sg;
+};
+
+/*
+ * This and associated data structs are used by the
+ * ioctl caller and are in cpu order.
+ */
+struct user_aac_srb
+{
+ u32 function;
+ u32 channel;
+ u32 id;
+ u32 lun;
+ u32 timeout;
+ u32 flags;
+ u32 count; // Data xfer size
+ u32 retry_limit;
+ u32 cdb_size;
+ u8 cdb[16];
+ struct user_sgmap sg;
+};
+
+#define AAC_SENSE_BUFFERSIZE 30
+
+struct aac_srb_reply
+{
+ __le32 status;
+ __le32 srb_status;
+ __le32 scsi_status;
+ __le32 data_xfer_length;
+ __le32 sense_data_size;
+ u8 sense_data[AAC_SENSE_BUFFERSIZE]; // Can this be SCSI_SENSE_BUFFERSIZE
+};
+/*
+ * SRB Flags
+ */
+#define SRB_NoDataXfer 0x0000
+#define SRB_DisableDisconnect 0x0004
+#define SRB_DisableSynchTransfer 0x0008
+#define SRB_BypassFrozenQueue 0x0010
+#define SRB_DisableAutosense 0x0020
+#define SRB_DataIn 0x0040
+#define SRB_DataOut 0x0080
+
+/*
+ * SRB Functions - set in aac_srb->function
+ */
+#define SRBF_ExecuteScsi 0x0000
+#define SRBF_ClaimDevice 0x0001
+#define SRBF_IO_Control 0x0002
+#define SRBF_ReceiveEvent 0x0003
+#define SRBF_ReleaseQueue 0x0004
+#define SRBF_AttachDevice 0x0005
+#define SRBF_ReleaseDevice 0x0006
+#define SRBF_Shutdown 0x0007
+#define SRBF_Flush 0x0008
+#define SRBF_AbortCommand 0x0010
+#define SRBF_ReleaseRecovery 0x0011
+#define SRBF_ResetBus 0x0012
+#define SRBF_ResetDevice 0x0013
+#define SRBF_TerminateIO 0x0014
+#define SRBF_FlushQueue 0x0015
+#define SRBF_RemoveDevice 0x0016
+#define SRBF_DomainValidation 0x0017
+
+/*
+ * SRB SCSI Status - set in aac_srb->scsi_status
+ */
+#define SRB_STATUS_PENDING 0x00
+#define SRB_STATUS_SUCCESS 0x01
+#define SRB_STATUS_ABORTED 0x02
+#define SRB_STATUS_ABORT_FAILED 0x03
+#define SRB_STATUS_ERROR 0x04
+#define SRB_STATUS_BUSY 0x05
+#define SRB_STATUS_INVALID_REQUEST 0x06
+#define SRB_STATUS_INVALID_PATH_ID 0x07
+#define SRB_STATUS_NO_DEVICE 0x08
+#define SRB_STATUS_TIMEOUT 0x09
+#define SRB_STATUS_SELECTION_TIMEOUT 0x0A
+#define SRB_STATUS_COMMAND_TIMEOUT 0x0B
+#define SRB_STATUS_MESSAGE_REJECTED 0x0D
+#define SRB_STATUS_BUS_RESET 0x0E
+#define SRB_STATUS_PARITY_ERROR 0x0F
+#define SRB_STATUS_REQUEST_SENSE_FAILED 0x10
+#define SRB_STATUS_NO_HBA 0x11
+#define SRB_STATUS_DATA_OVERRUN 0x12
+#define SRB_STATUS_UNEXPECTED_BUS_FREE 0x13
+#define SRB_STATUS_PHASE_SEQUENCE_FAILURE 0x14
+#define SRB_STATUS_BAD_SRB_BLOCK_LENGTH 0x15
+#define SRB_STATUS_REQUEST_FLUSHED 0x16
+#define SRB_STATUS_DELAYED_RETRY 0x17
+#define SRB_STATUS_INVALID_LUN 0x20
+#define SRB_STATUS_INVALID_TARGET_ID 0x21
+#define SRB_STATUS_BAD_FUNCTION 0x22
+#define SRB_STATUS_ERROR_RECOVERY 0x23
+#define SRB_STATUS_NOT_STARTED 0x24
+#define SRB_STATUS_NOT_IN_USE 0x30
+#define SRB_STATUS_FORCE_ABORT 0x31
+#define SRB_STATUS_DOMAIN_VALIDATION_FAIL 0x32
+
+/*
+ * Object-Server / Volume-Manager Dispatch Classes
+ */
+
+#define VM_Null 0
+#define VM_NameServe 1
+#define VM_ContainerConfig 2
+#define VM_Ioctl 3
+#define VM_FilesystemIoctl 4
+#define VM_CloseAll 5
+#define VM_CtBlockRead 6
+#define VM_CtBlockWrite 7
+#define VM_SliceBlockRead 8 /* raw access to configured "storage objects" */
+#define VM_SliceBlockWrite 9
+#define VM_DriveBlockRead 10 /* raw access to physical devices */
+#define VM_DriveBlockWrite 11
+#define VM_EnclosureMgt 12 /* enclosure management */
+#define VM_Unused 13 /* used to be diskset management */
+#define VM_CtBlockVerify 14
+#define VM_CtPerf 15 /* performance test */
+#define VM_CtBlockRead64 16
+#define VM_CtBlockWrite64 17
+#define VM_CtBlockVerify64 18
+#define VM_CtHostRead64 19
+#define VM_CtHostWrite64 20
+#define VM_DrvErrTblLog 21
+#define VM_NameServe64 22
+#define VM_NameServeAllBlk 30
+
+#define MAX_VMCOMMAND_NUM 23 /* used for sizing stats array - leave last */
+
+/*
+ * Descriptive information (eg, vital stats)
+ * that a content manager might report. The
+ * FileArray filesystem component is one example
+ * of a content manager. Raw mode might be
+ * another.
+ */
+
+struct aac_fsinfo {
+ __le32 fsTotalSize; /* Consumed by fs, incl. metadata */
+ __le32 fsBlockSize;
+ __le32 fsFragSize;
+ __le32 fsMaxExtendSize;
+ __le32 fsSpaceUnits;
+ __le32 fsMaxNumFiles;
+ __le32 fsNumFreeFiles;
+ __le32 fsInodeDensity;
+}; /* valid iff ObjType == FT_FILESYS && !(ContentState & FSCS_NOTCLEAN) */
+
+struct aac_blockdevinfo {
+ __le32 block_size;
+};
+
+union aac_contentinfo {
+ struct aac_fsinfo filesys;
+ struct aac_blockdevinfo bdevinfo;
+};
+
+/*
+ * Query for Container Configuration Status
+ */
+
+#define CT_GET_CONFIG_STATUS 147
+struct aac_get_config_status {
+ __le32 command; /* VM_ContainerConfig */
+ __le32 type; /* CT_GET_CONFIG_STATUS */
+ __le32 parm1;
+ __le32 parm2;
+ __le32 parm3;
+ __le32 parm4;
+ __le32 parm5;
+ __le32 count; /* sizeof(((struct aac_get_config_status_resp *)NULL)->data) */
+};
+
+#define CFACT_CONTINUE 0
+#define CFACT_PAUSE 1
+#define CFACT_ABORT 2
+struct aac_get_config_status_resp {
+ __le32 response; /* ST_OK */
+ __le32 dummy0;
+ __le32 status; /* CT_OK */
+ __le32 parm1;
+ __le32 parm2;
+ __le32 parm3;
+ __le32 parm4;
+ __le32 parm5;
+ struct {
+ __le32 action; /* CFACT_CONTINUE, CFACT_PAUSE or CFACT_ABORT */
+ __le16 flags;
+ __le16 count;
+ } data;
+};
+
+/*
+ * Accept the configuration as-is
+ */
+
+#define CT_COMMIT_CONFIG 152
+
+struct aac_commit_config {
+ __le32 command; /* VM_ContainerConfig */
+ __le32 type; /* CT_COMMIT_CONFIG */
+};
+
+/*
+ * Query for Container Configuration Status
+ */
+
+#define CT_GET_CONTAINER_COUNT 4
+struct aac_get_container_count {
+ __le32 command; /* VM_ContainerConfig */
+ __le32 type; /* CT_GET_CONTAINER_COUNT */
+};
+
+struct aac_get_container_count_resp {
+ __le32 response; /* ST_OK */
+ __le32 dummy0;
+ __le32 MaxContainers;
+ __le32 ContainerSwitchEntries;
+ __le32 MaxPartitions;
+ __le32 MaxSimpleVolumes;
+};
+
+
+/*
+ * Query for "mountable" objects, ie, objects that are typically
+ * associated with a drive letter on the client (host) side.
+ */
+
+struct aac_mntent {
+ __le32 oid;
+ u8 name[16]; /* if applicable */
+ struct creation_info create_info; /* if applicable */
+ __le32 capacity;
+ __le32 vol; /* substrate structure */
+ __le32 obj; /* FT_FILESYS, etc. */
+ __le32 state; /* unready for mounting,
+ readonly, etc. */
+ union aac_contentinfo fileinfo; /* Info specific to content
+ manager (eg, filesystem) */
+ __le32 altoid; /* != oid <==> snapshot or
+ broken mirror exists */
+ __le32 capacityhigh;
+};
+
+#define FSCS_NOTCLEAN 0x0001 /* fsck is necessary before mounting */
+#define FSCS_READONLY 0x0002 /* possible result of broken mirror */
+#define FSCS_HIDDEN 0x0004 /* should be ignored - set during a clear */
+#define FSCS_NOT_READY 0x0008 /* Array spinning up to fulfil request */
+
+struct aac_query_mount {
+ __le32 command;
+ __le32 type;
+ __le32 count;
+};
+
+struct aac_mount {
+ __le32 status;
+ __le32 type; /* should be same as that requested */
+ __le32 count;
+ struct aac_mntent mnt[1];
+};
+
+#define CT_READ_NAME 130
+struct aac_get_name {
+ __le32 command; /* VM_ContainerConfig */
+ __le32 type; /* CT_READ_NAME */
+ __le32 cid;
+ __le32 parm1;
+ __le32 parm2;
+ __le32 parm3;
+ __le32 parm4;
+ __le32 count; /* sizeof(((struct aac_get_name_resp *)NULL)->data) */
+};
+
+struct aac_get_name_resp {
+ __le32 dummy0;
+ __le32 dummy1;
+ __le32 status; /* CT_OK */
+ __le32 parm1;
+ __le32 parm2;
+ __le32 parm3;
+ __le32 parm4;
+ __le32 parm5;
+ u8 data[16];
+};
+
+#define CT_CID_TO_32BITS_UID 165
+struct aac_get_serial {
+ __le32 command; /* VM_ContainerConfig */
+ __le32 type; /* CT_CID_TO_32BITS_UID */
+ __le32 cid;
+};
+
+struct aac_get_serial_resp {
+ __le32 dummy0;
+ __le32 dummy1;
+ __le32 status; /* CT_OK */
+ __le32 uid;
+};
+
+/*
+ * The following command is sent to shut down each container.
+ */
+
+struct aac_close {
+ __le32 command;
+ __le32 cid;
+};
+
+struct aac_query_disk
+{
+ s32 cnum;
+ s32 bus;
+ s32 id;
+ s32 lun;
+ u32 valid;
+ u32 locked;
+ u32 deleted;
+ s32 instance;
+ s8 name[10];
+ u32 unmapped;
+};
+
+struct aac_delete_disk {
+ u32 disknum;
+ u32 cnum;
+};
+
+struct fib_ioctl
+{
+ u32 fibctx;
+ s32 wait;
+ char __user *fib;
+};
+
+struct revision
+{
+ u32 compat;
+ __le32 version;
+ __le32 build;
+};
+
+
+/*
+ * Ugly - non Linux like ioctl coding for back compat.
+ */
+
+#define CTL_CODE(function, method) ( \
+ (4<< 16) | ((function) << 2) | (method) \
+)
+
+/*
+ * Define the method codes for how buffers are passed for I/O and FS
+ * controls
+ */
+
+#define METHOD_BUFFERED 0
+#define METHOD_NEITHER 3
+
+/*
+ * Filesystem ioctls
+ */
+
+#define FSACTL_SENDFIB CTL_CODE(2050, METHOD_BUFFERED)
+#define FSACTL_SEND_RAW_SRB CTL_CODE(2067, METHOD_BUFFERED)
+#define FSACTL_DELETE_DISK 0x163
+#define FSACTL_QUERY_DISK 0x173
+#define FSACTL_OPEN_GET_ADAPTER_FIB CTL_CODE(2100, METHOD_BUFFERED)
+#define FSACTL_GET_NEXT_ADAPTER_FIB CTL_CODE(2101, METHOD_BUFFERED)
+#define FSACTL_CLOSE_GET_ADAPTER_FIB CTL_CODE(2102, METHOD_BUFFERED)
+#define FSACTL_MINIPORT_REV_CHECK CTL_CODE(2107, METHOD_BUFFERED)
+#define FSACTL_GET_PCI_INFO CTL_CODE(2119, METHOD_BUFFERED)
+#define FSACTL_FORCE_DELETE_DISK CTL_CODE(2120, METHOD_NEITHER)
+#define FSACTL_GET_CONTAINERS 2131
+#define FSACTL_SEND_LARGE_FIB CTL_CODE(2138, METHOD_BUFFERED)
+
+
+struct aac_common
+{
+ /*
+ * If this value is set to 1 then interrupt moderation will occur
+ * in the base commuication support.
+ */
+ u32 irq_mod;
+ u32 peak_fibs;
+ u32 zero_fibs;
+ u32 fib_timeouts;
+ /*
+ * Statistical counters in debug mode
+ */
+#ifdef DBG
+ u32 FibsSent;
+ u32 FibRecved;
+ u32 NoResponseSent;
+ u32 NoResponseRecved;
+ u32 AsyncSent;
+ u32 AsyncRecved;
+ u32 NormalSent;
+ u32 NormalRecved;
+#endif
+};
+
+extern struct aac_common aac_config;
+
+
+/*
+ * The following macro is used when sending and receiving FIBs. It is
+ * only used for debugging.
+ */
+
+#ifdef DBG
+#define FIB_COUNTER_INCREMENT(counter) (counter)++
+#else
+#define FIB_COUNTER_INCREMENT(counter)
+#endif
+
+/*
+ * Adapter direct commands
+ * Monitor/Kernel API
+ */
+
+#define BREAKPOINT_REQUEST 0x00000004
+#define INIT_STRUCT_BASE_ADDRESS 0x00000005
+#define READ_PERMANENT_PARAMETERS 0x0000000a
+#define WRITE_PERMANENT_PARAMETERS 0x0000000b
+#define HOST_CRASHING 0x0000000d
+#define SEND_SYNCHRONOUS_FIB 0x0000000c
+#define COMMAND_POST_RESULTS 0x00000014
+#define GET_ADAPTER_PROPERTIES 0x00000019
+#define GET_DRIVER_BUFFER_PROPERTIES 0x00000023
+#define RCV_TEMP_READINGS 0x00000025
+#define GET_COMM_PREFERRED_SETTINGS 0x00000026
+#define IOP_RESET 0x00001000
+#define IOP_RESET_ALWAYS 0x00001001
+#define RE_INIT_ADAPTER 0x000000ee
+
+/*
+ * Adapter Status Register
+ *
+ * Phase Staus mailbox is 32bits:
+ * <31:16> = Phase Status
+ * <15:0> = Phase
+ *
+ * The adapter reports is present state through the phase. Only
+ * a single phase should be ever be set. Each phase can have multiple
+ * phase status bits to provide more detailed information about the
+ * state of the board. Care should be taken to ensure that any phase
+ * status bits that are set when changing the phase are also valid
+ * for the new phase or be cleared out. Adapter software (monitor,
+ * iflash, kernel) is responsible for properly maintining the phase
+ * status mailbox when it is running.
+ *
+ * MONKER_API Phases
+ *
+ * Phases are bit oriented. It is NOT valid to have multiple bits set
+ */
+
+#define SELF_TEST_FAILED 0x00000004
+#define MONITOR_PANIC 0x00000020
+#define KERNEL_UP_AND_RUNNING 0x00000080
+#define KERNEL_PANIC 0x00000100
+#define FLASH_UPD_PENDING 0x00002000
+#define FLASH_UPD_SUCCESS 0x00004000
+#define FLASH_UPD_FAILED 0x00008000
+#define FWUPD_TIMEOUT (5 * 60)
+
+/*
+ * Doorbell bit defines
+ */
+
+#define DoorBellSyncCmdAvailable (1<<0) /* Host -> Adapter */
+#define DoorBellPrintfDone (1<<5) /* Host -> Adapter */
+#define DoorBellAdapterNormCmdReady (1<<1) /* Adapter -> Host */
+#define DoorBellAdapterNormRespReady (1<<2) /* Adapter -> Host */
+#define DoorBellAdapterNormCmdNotFull (1<<3) /* Adapter -> Host */
+#define DoorBellAdapterNormRespNotFull (1<<4) /* Adapter -> Host */
+#define DoorBellPrintfReady (1<<5) /* Adapter -> Host */
+#define DoorBellAifPending (1<<6) /* Adapter -> Host */
+
+/* PMC specific outbound doorbell bits */
+#define PmDoorBellResponseSent (1<<1) /* Adapter -> Host */
+
+/*
+ * For FIB communication, we need all of the following things
+ * to send back to the user.
+ */
+
+#define AifCmdEventNotify 1 /* Notify of event */
+#define AifEnConfigChange 3 /* Adapter configuration change */
+#define AifEnContainerChange 4 /* Container configuration change */
+#define AifEnDeviceFailure 5 /* SCSI device failed */
+#define AifEnEnclosureManagement 13 /* EM_DRIVE_* */
+#define EM_DRIVE_INSERTION 31
+#define EM_DRIVE_REMOVAL 32
+#define EM_SES_DRIVE_INSERTION 33
+#define EM_SES_DRIVE_REMOVAL 26
+#define AifEnBatteryEvent 14 /* Change in Battery State */
+#define AifEnAddContainer 15 /* A new array was created */
+#define AifEnDeleteContainer 16 /* A container was deleted */
+#define AifEnExpEvent 23 /* Firmware Event Log */
+#define AifExeFirmwarePanic 3 /* Firmware Event Panic */
+#define AifHighPriority 3 /* Highest Priority Event */
+#define AifEnAddJBOD 30 /* JBOD created */
+#define AifEnDeleteJBOD 31 /* JBOD deleted */
+
+#define AifCmdJobProgress 2 /* Progress report */
+#define AifJobCtrZero 101 /* Array Zero progress */
+#define AifJobStsSuccess 1 /* Job completes */
+#define AifJobStsRunning 102 /* Job running */
+#define AifCmdAPIReport 3 /* Report from other user of API */
+#define AifCmdDriverNotify 4 /* Notify host driver of event */
+#define AifDenMorphComplete 200 /* A morph operation completed */
+#define AifDenVolumeExtendComplete 201 /* A volume extend completed */
+#define AifReqJobList 100 /* Gets back complete job list */
+#define AifReqJobsForCtr 101 /* Gets back jobs for specific container */
+#define AifReqJobsForScsi 102 /* Gets back jobs for specific SCSI device */
+#define AifReqJobReport 103 /* Gets back a specific job report or list of them */
+#define AifReqTerminateJob 104 /* Terminates job */
+#define AifReqSuspendJob 105 /* Suspends a job */
+#define AifReqResumeJob 106 /* Resumes a job */
+#define AifReqSendAPIReport 107 /* API generic report requests */
+#define AifReqAPIJobStart 108 /* Start a job from the API */
+#define AifReqAPIJobUpdate 109 /* Update a job report from the API */
+#define AifReqAPIJobFinish 110 /* Finish a job from the API */
+
+/* PMC NEW COMM: Request the event data */
+#define AifReqEvent 200
+
+/* RAW device deleted */
+#define AifRawDeviceRemove 203
+
+/*
+ * Adapter Initiated FIB command structures. Start with the adapter
+ * initiated FIBs that really come from the adapter, and get responded
+ * to by the host.
+ */
+
+struct aac_aifcmd {
+ __le32 command; /* Tell host what type of notify this is */
+ __le32 seqnum; /* To allow ordering of reports (if necessary) */
+ u8 data[1]; /* Undefined length (from kernel viewpoint) */
+};
+
+/**
+ * Convert capacity to cylinders
+ * accounting for the fact capacity could be a 64 bit value
+ *
+ */
+static inline unsigned int cap_to_cyls(sector_t capacity, unsigned divisor)
+{
+ sector_div(capacity, divisor);
+ return capacity;
+}
+
+/* SCp.phase values */
+#define AAC_OWNER_MIDLEVEL 0x101
+#define AAC_OWNER_LOWLEVEL 0x102
+#define AAC_OWNER_ERROR_HANDLER 0x103
+#define AAC_OWNER_FIRMWARE 0x106
+
+const char *aac_driverinfo(struct Scsi_Host *);
+struct fib *aac_fib_alloc(struct aac_dev *dev);
+int aac_fib_setup(struct aac_dev *dev);
+void aac_fib_map_free(struct aac_dev *dev);
+void aac_fib_free(struct fib * context);
+void aac_fib_init(struct fib * context);
+void aac_printf(struct aac_dev *dev, u32 val);
+int aac_fib_send(u16 command, struct fib * context, unsigned long size, int priority, int wait, int reply, fib_callback callback, void *ctxt);
+int aac_consumer_get(struct aac_dev * dev, struct aac_queue * q, struct aac_entry **entry);
+void aac_consumer_free(struct aac_dev * dev, struct aac_queue * q, u32 qnum);
+int aac_fib_complete(struct fib * context);
+#define fib_data(fibctx) ((void *)(fibctx)->hw_fib_va->data)
+struct aac_dev *aac_init_adapter(struct aac_dev *dev);
+void aac_src_access_devreg(struct aac_dev *dev, int mode);
+int aac_get_config_status(struct aac_dev *dev, int commit_flag);
+int aac_get_containers(struct aac_dev *dev);
+int aac_scsi_cmd(struct scsi_cmnd *cmd);
+int aac_dev_ioctl(struct aac_dev *dev, int cmd, void __user *arg);
+#ifndef shost_to_class
+#define shost_to_class(shost) &shost->shost_dev
+#endif
+ssize_t aac_get_serial_number(struct device *dev, char *buf);
+int aac_do_ioctl(struct aac_dev * dev, int cmd, void __user *arg);
+int aac_rx_init(struct aac_dev *dev);
+int aac_rkt_init(struct aac_dev *dev);
+int aac_nark_init(struct aac_dev *dev);
+int aac_sa_init(struct aac_dev *dev);
+int aac_src_init(struct aac_dev *dev);
+int aac_srcv_init(struct aac_dev *dev);
+int aac_queue_get(struct aac_dev * dev, u32 * index, u32 qid, struct hw_fib * hw_fib, int wait, struct fib * fibptr, unsigned long *nonotify);
+unsigned int aac_response_normal(struct aac_queue * q);
+unsigned int aac_command_normal(struct aac_queue * q);
+unsigned int aac_intr_normal(struct aac_dev *dev, u32 Index,
+ int isAif, int isFastResponse,
+ struct hw_fib *aif_fib);
+int aac_reset_adapter(struct aac_dev * dev, int forced);
+int aac_check_health(struct aac_dev * dev);
+int aac_command_thread(void *data);
+int aac_close_fib_context(struct aac_dev * dev, struct aac_fib_context *fibctx);
+int aac_fib_adapter_complete(struct fib * fibptr, unsigned short size);
+struct aac_driver_ident* aac_get_driver_ident(int devtype);
+int aac_get_adapter_info(struct aac_dev* dev);
+int aac_send_shutdown(struct aac_dev *dev);
+int aac_probe_container(struct aac_dev *dev, int cid);
+int _aac_rx_init(struct aac_dev *dev);
+int aac_rx_select_comm(struct aac_dev *dev, int comm);
+int aac_rx_deliver_producer(struct fib * fib);
+char * get_container_type(unsigned type);
+extern int numacb;
+extern int acbsize;
+extern char aac_driver_version[];
+extern int startup_timeout;
+extern int aif_timeout;
+extern int expose_physicals;
+extern int aac_reset_devices;
+extern int aac_msi;
+extern int aac_commit;
+extern int update_interval;
+extern int check_interval;
+extern int aac_check_reset;
Code Review / kvmfornfv.git / blobdiff