Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / scsi / a2091.c
diff --git a/kernel/drivers/scsi/a2091.c b/kernel/drivers/scsi/a2091.c
new file mode 100644 (file)
index 0000000..9176bfb
--- /dev/null
@@ -0,0 +1,281 @@
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/zorro.h>
+#include <linux/module.h>
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/amigaints.h>
+#include <asm/amigahw.h>
+
+#include "scsi.h"
+#include "wd33c93.h"
+#include "a2091.h"
+
+
+struct a2091_hostdata {
+       struct WD33C93_hostdata wh;
+       struct a2091_scsiregs *regs;
+};
+
+static irqreturn_t a2091_intr(int irq, void *data)
+{
+       struct Scsi_Host *instance = data;
+       struct a2091_hostdata *hdata = shost_priv(instance);
+       unsigned int status = hdata->regs->ISTR;
+       unsigned long flags;
+
+       if (!(status & (ISTR_INT_F | ISTR_INT_P)) || !(status & ISTR_INTS))
+               return IRQ_NONE;
+
+       spin_lock_irqsave(instance->host_lock, flags);
+       wd33c93_intr(instance);
+       spin_unlock_irqrestore(instance->host_lock, flags);
+       return IRQ_HANDLED;
+}
+
+static int dma_setup(struct scsi_cmnd *cmd, int dir_in)
+{
+       struct Scsi_Host *instance = cmd->device->host;
+       struct a2091_hostdata *hdata = shost_priv(instance);
+       struct WD33C93_hostdata *wh = &hdata->wh;
+       struct a2091_scsiregs *regs = hdata->regs;
+       unsigned short cntr = CNTR_PDMD | CNTR_INTEN;
+       unsigned long addr = virt_to_bus(cmd->SCp.ptr);
+
+       /* don't allow DMA if the physical address is bad */
+       if (addr & A2091_XFER_MASK) {
+               wh->dma_bounce_len = (cmd->SCp.this_residual + 511) & ~0x1ff;
+               wh->dma_bounce_buffer = kmalloc(wh->dma_bounce_len,
+                                               GFP_KERNEL);
+
+               /* can't allocate memory; use PIO */
+               if (!wh->dma_bounce_buffer) {
+                       wh->dma_bounce_len = 0;
+                       return 1;
+               }
+
+               /* get the physical address of the bounce buffer */
+               addr = virt_to_bus(wh->dma_bounce_buffer);
+
+               /* the bounce buffer may not be in the first 16M of physmem */
+               if (addr & A2091_XFER_MASK) {
+                       /* we could use chipmem... maybe later */
+                       kfree(wh->dma_bounce_buffer);
+                       wh->dma_bounce_buffer = NULL;
+                       wh->dma_bounce_len = 0;
+                       return 1;
+               }
+
+               if (!dir_in) {
+                       /* copy to bounce buffer for a write */
+                       memcpy(wh->dma_bounce_buffer, cmd->SCp.ptr,
+                              cmd->SCp.this_residual);
+               }
+       }
+
+       /* setup dma direction */
+       if (!dir_in)
+               cntr |= CNTR_DDIR;
+
+       /* remember direction */
+       wh->dma_dir = dir_in;
+
+       regs->CNTR = cntr;
+
+       /* setup DMA *physical* address */
+       regs->ACR = addr;
+
+       if (dir_in) {
+               /* invalidate any cache */
+               cache_clear(addr, cmd->SCp.this_residual);
+       } else {
+               /* push any dirty cache */
+               cache_push(addr, cmd->SCp.this_residual);
+       }
+       /* start DMA */
+       regs->ST_DMA = 1;
+
+       /* return success */
+       return 0;
+}
+
+static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt,
+                    int status)
+{
+       struct a2091_hostdata *hdata = shost_priv(instance);
+       struct WD33C93_hostdata *wh = &hdata->wh;
+       struct a2091_scsiregs *regs = hdata->regs;
+
+       /* disable SCSI interrupts */
+       unsigned short cntr = CNTR_PDMD;
+
+       if (!wh->dma_dir)
+               cntr |= CNTR_DDIR;
+
+       /* disable SCSI interrupts */
+       regs->CNTR = cntr;
+
+       /* flush if we were reading */
+       if (wh->dma_dir) {
+               regs->FLUSH = 1;
+               while (!(regs->ISTR & ISTR_FE_FLG))
+                       ;
+       }
+
+       /* clear a possible interrupt */
+       regs->CINT = 1;
+
+       /* stop DMA */
+       regs->SP_DMA = 1;
+
+       /* restore the CONTROL bits (minus the direction flag) */
+       regs->CNTR = CNTR_PDMD | CNTR_INTEN;
+
+       /* copy from a bounce buffer, if necessary */
+       if (status && wh->dma_bounce_buffer) {
+               if (wh->dma_dir)
+                       memcpy(SCpnt->SCp.ptr, wh->dma_bounce_buffer,
+                              SCpnt->SCp.this_residual);
+               kfree(wh->dma_bounce_buffer);
+               wh->dma_bounce_buffer = NULL;
+               wh->dma_bounce_len = 0;
+       }
+}
+
+static int a2091_bus_reset(struct scsi_cmnd *cmd)
+{
+       struct Scsi_Host *instance = cmd->device->host;
+
+       /* FIXME perform bus-specific reset */
+
+       /* FIXME 2: kill this function, and let midlayer fall back
+          to the same action, calling wd33c93_host_reset() */
+
+       spin_lock_irq(instance->host_lock);
+       wd33c93_host_reset(cmd);
+       spin_unlock_irq(instance->host_lock);
+
+       return SUCCESS;
+}
+
+static struct scsi_host_template a2091_scsi_template = {
+       .module                 = THIS_MODULE,
+       .name                   = "Commodore A2091/A590 SCSI",
+       .show_info              = wd33c93_show_info,
+       .write_info             = wd33c93_write_info,
+       .proc_name              = "A2901",
+       .queuecommand           = wd33c93_queuecommand,
+       .eh_abort_handler       = wd33c93_abort,
+       .eh_bus_reset_handler   = a2091_bus_reset,
+       .eh_host_reset_handler  = wd33c93_host_reset,
+       .can_queue              = CAN_QUEUE,
+       .this_id                = 7,
+       .sg_tablesize           = SG_ALL,
+       .cmd_per_lun            = CMD_PER_LUN,
+       .use_clustering         = DISABLE_CLUSTERING
+};
+
+static int a2091_probe(struct zorro_dev *z, const struct zorro_device_id *ent)
+{
+       struct Scsi_Host *instance;
+       int error;
+       struct a2091_scsiregs *regs;
+       wd33c93_regs wdregs;
+       struct a2091_hostdata *hdata;
+
+       if (!request_mem_region(z->resource.start, 256, "wd33c93"))
+               return -EBUSY;
+
+       instance = scsi_host_alloc(&a2091_scsi_template,
+                                  sizeof(struct a2091_hostdata));
+       if (!instance) {
+               error = -ENOMEM;
+               goto fail_alloc;
+       }
+
+       instance->irq = IRQ_AMIGA_PORTS;
+       instance->unique_id = z->slotaddr;
+
+       regs = ZTWO_VADDR(z->resource.start);
+       regs->DAWR = DAWR_A2091;
+
+       wdregs.SASR = &regs->SASR;
+       wdregs.SCMD = &regs->SCMD;
+
+       hdata = shost_priv(instance);
+       hdata->wh.no_sync = 0xff;
+       hdata->wh.fast = 0;
+       hdata->wh.dma_mode = CTRL_DMA;
+       hdata->regs = regs;
+
+       wd33c93_init(instance, wdregs, dma_setup, dma_stop, WD33C93_FS_8_10);
+       error = request_irq(IRQ_AMIGA_PORTS, a2091_intr, IRQF_SHARED,
+                           "A2091 SCSI", instance);
+       if (error)
+               goto fail_irq;
+
+       regs->CNTR = CNTR_PDMD | CNTR_INTEN;
+
+       error = scsi_add_host(instance, NULL);
+       if (error)
+               goto fail_host;
+
+       zorro_set_drvdata(z, instance);
+
+       scsi_scan_host(instance);
+       return 0;
+
+fail_host:
+       free_irq(IRQ_AMIGA_PORTS, instance);
+fail_irq:
+       scsi_host_put(instance);
+fail_alloc:
+       release_mem_region(z->resource.start, 256);
+       return error;
+}
+
+static void a2091_remove(struct zorro_dev *z)
+{
+       struct Scsi_Host *instance = zorro_get_drvdata(z);
+       struct a2091_hostdata *hdata = shost_priv(instance);
+
+       hdata->regs->CNTR = 0;
+       scsi_remove_host(instance);
+       free_irq(IRQ_AMIGA_PORTS, instance);
+       scsi_host_put(instance);
+       release_mem_region(z->resource.start, 256);
+}
+
+static struct zorro_device_id a2091_zorro_tbl[] = {
+       { ZORRO_PROD_CBM_A590_A2091_1 },
+       { ZORRO_PROD_CBM_A590_A2091_2 },
+       { 0 }
+};
+MODULE_DEVICE_TABLE(zorro, a2091_zorro_tbl);
+
+static struct zorro_driver a2091_driver = {
+       .name           = "a2091",
+       .id_table       = a2091_zorro_tbl,
+       .probe          = a2091_probe,
+       .remove         = a2091_remove,
+};
+
+static int __init a2091_init(void)
+{
+       return zorro_register_driver(&a2091_driver);
+}
+module_init(a2091_init);
+
+static void __exit a2091_exit(void)
+{
+       zorro_unregister_driver(&a2091_driver);
+}
+module_exit(a2091_exit);
+
+MODULE_DESCRIPTION("Commodore A2091/A590 SCSI");
+MODULE_LICENSE("GPL");