#define AXP20X_IO_ENABLED 0x03
#define AXP20X_IO_DISABLED 0x07
+#define AXP22X_IO_ENABLED 0x03
+#define AXP22X_IO_DISABLED 0x04
+
#define AXP20X_WORKMODE_DCDC2_MASK BIT(2)
#define AXP20X_WORKMODE_DCDC3_MASK BIT(1)
+#define AXP22X_WORKMODE_DCDCX_MASK(x) BIT(x)
#define AXP20X_FREQ_DCDC_MASK 0x0f
-#define AXP20X_DESC_IO(_id, _match, _supply, _min, _max, _step, _vreg, _vmask, \
- _ereg, _emask, _enable_val, _disable_val) \
- [AXP20X_##_id] = { \
+#define AXP_DESC_IO(_family, _id, _match, _supply, _min, _max, _step, _vreg, \
+ _vmask, _ereg, _emask, _enable_val, _disable_val) \
+ [_family##_##_id] = { \
.name = #_id, \
.supply_name = (_supply), \
.of_match = of_match_ptr(_match), \
.regulators_node = of_match_ptr("regulators"), \
.type = REGULATOR_VOLTAGE, \
- .id = AXP20X_##_id, \
+ .id = _family##_##_id, \
.n_voltages = (((_max) - (_min)) / (_step) + 1), \
.owner = THIS_MODULE, \
.min_uV = (_min) * 1000, \
.ops = &axp20x_ops, \
}
-#define AXP20X_DESC(_id, _match, _supply, _min, _max, _step, _vreg, _vmask, \
- _ereg, _emask) \
- [AXP20X_##_id] = { \
+#define AXP_DESC(_family, _id, _match, _supply, _min, _max, _step, _vreg, \
+ _vmask, _ereg, _emask) \
+ [_family##_##_id] = { \
.name = #_id, \
.supply_name = (_supply), \
.of_match = of_match_ptr(_match), \
.regulators_node = of_match_ptr("regulators"), \
.type = REGULATOR_VOLTAGE, \
- .id = AXP20X_##_id, \
+ .id = _family##_##_id, \
.n_voltages = (((_max) - (_min)) / (_step) + 1), \
.owner = THIS_MODULE, \
.min_uV = (_min) * 1000, \
.ops = &axp20x_ops, \
}
-#define AXP20X_DESC_FIXED(_id, _match, _supply, _volt) \
- [AXP20X_##_id] = { \
+#define AXP_DESC_SW(_family, _id, _match, _supply, _min, _max, _step, _vreg, \
+ _vmask, _ereg, _emask) \
+ [_family##_##_id] = { \
+ .name = #_id, \
+ .supply_name = (_supply), \
+ .of_match = of_match_ptr(_match), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .type = REGULATOR_VOLTAGE, \
+ .id = _family##_##_id, \
+ .n_voltages = (((_max) - (_min)) / (_step) + 1), \
+ .owner = THIS_MODULE, \
+ .min_uV = (_min) * 1000, \
+ .uV_step = (_step) * 1000, \
+ .vsel_reg = (_vreg), \
+ .vsel_mask = (_vmask), \
+ .enable_reg = (_ereg), \
+ .enable_mask = (_emask), \
+ .ops = &axp20x_ops_sw, \
+ }
+
+#define AXP_DESC_FIXED(_family, _id, _match, _supply, _volt) \
+ [_family##_##_id] = { \
.name = #_id, \
.supply_name = (_supply), \
.of_match = of_match_ptr(_match), \
.regulators_node = of_match_ptr("regulators"), \
.type = REGULATOR_VOLTAGE, \
- .id = AXP20X_##_id, \
+ .id = _family##_##_id, \
.n_voltages = 1, \
.owner = THIS_MODULE, \
.min_uV = (_volt) * 1000, \
.ops = &axp20x_ops_fixed \
}
-#define AXP20X_DESC_TABLE(_id, _match, _supply, _table, _vreg, _vmask, _ereg, \
- _emask) \
- [AXP20X_##_id] = { \
+#define AXP_DESC_TABLE(_family, _id, _match, _supply, _table, _vreg, _vmask, \
+ _ereg, _emask) \
+ [_family##_##_id] = { \
.name = #_id, \
.supply_name = (_supply), \
.of_match = of_match_ptr(_match), \
.regulators_node = of_match_ptr("regulators"), \
.type = REGULATOR_VOLTAGE, \
- .id = AXP20X_##_id, \
+ .id = _family##_##_id, \
.n_voltages = ARRAY_SIZE(_table), \
.owner = THIS_MODULE, \
.vsel_reg = (_vreg), \
.is_enabled = regulator_is_enabled_regmap,
};
+static struct regulator_ops axp20x_ops_sw = {
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .list_voltage = regulator_list_voltage_linear,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+};
+
static const struct regulator_desc axp20x_regulators[] = {
- AXP20X_DESC(DCDC2, "dcdc2", "vin2", 700, 2275, 25, AXP20X_DCDC2_V_OUT,
- 0x3f, AXP20X_PWR_OUT_CTRL, 0x10),
- AXP20X_DESC(DCDC3, "dcdc3", "vin3", 700, 3500, 25, AXP20X_DCDC3_V_OUT,
- 0x7f, AXP20X_PWR_OUT_CTRL, 0x02),
- AXP20X_DESC_FIXED(LDO1, "ldo1", "acin", 1300),
- AXP20X_DESC(LDO2, "ldo2", "ldo24in", 1800, 3300, 100,
- AXP20X_LDO24_V_OUT, 0xf0, AXP20X_PWR_OUT_CTRL, 0x04),
- AXP20X_DESC(LDO3, "ldo3", "ldo3in", 700, 3500, 25, AXP20X_LDO3_V_OUT,
- 0x7f, AXP20X_PWR_OUT_CTRL, 0x40),
- AXP20X_DESC_TABLE(LDO4, "ldo4", "ldo24in", axp20x_ldo4_data,
- AXP20X_LDO24_V_OUT, 0x0f, AXP20X_PWR_OUT_CTRL, 0x08),
- AXP20X_DESC_IO(LDO5, "ldo5", "ldo5in", 1800, 3300, 100,
- AXP20X_LDO5_V_OUT, 0xf0, AXP20X_GPIO0_CTRL, 0x07,
- AXP20X_IO_ENABLED, AXP20X_IO_DISABLED),
+ AXP_DESC(AXP20X, DCDC2, "dcdc2", "vin2", 700, 2275, 25,
+ AXP20X_DCDC2_V_OUT, 0x3f, AXP20X_PWR_OUT_CTRL, 0x10),
+ AXP_DESC(AXP20X, DCDC3, "dcdc3", "vin3", 700, 3500, 25,
+ AXP20X_DCDC3_V_OUT, 0x7f, AXP20X_PWR_OUT_CTRL, 0x02),
+ AXP_DESC_FIXED(AXP20X, LDO1, "ldo1", "acin", 1300),
+ AXP_DESC(AXP20X, LDO2, "ldo2", "ldo24in", 1800, 3300, 100,
+ AXP20X_LDO24_V_OUT, 0xf0, AXP20X_PWR_OUT_CTRL, 0x04),
+ AXP_DESC(AXP20X, LDO3, "ldo3", "ldo3in", 700, 3500, 25,
+ AXP20X_LDO3_V_OUT, 0x7f, AXP20X_PWR_OUT_CTRL, 0x40),
+ AXP_DESC_TABLE(AXP20X, LDO4, "ldo4", "ldo24in", axp20x_ldo4_data,
+ AXP20X_LDO24_V_OUT, 0x0f, AXP20X_PWR_OUT_CTRL, 0x08),
+ AXP_DESC_IO(AXP20X, LDO5, "ldo5", "ldo5in", 1800, 3300, 100,
+ AXP20X_LDO5_V_OUT, 0xf0, AXP20X_GPIO0_CTRL, 0x07,
+ AXP20X_IO_ENABLED, AXP20X_IO_DISABLED),
+};
+
+static const struct regulator_desc axp22x_regulators[] = {
+ AXP_DESC(AXP22X, DCDC1, "dcdc1", "vin1", 1600, 3400, 100,
+ AXP22X_DCDC1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(1)),
+ AXP_DESC(AXP22X, DCDC2, "dcdc2", "vin2", 600, 1540, 20,
+ AXP22X_DCDC2_V_OUT, 0x3f, AXP22X_PWR_OUT_CTRL1, BIT(2)),
+ AXP_DESC(AXP22X, DCDC3, "dcdc3", "vin3", 600, 1860, 20,
+ AXP22X_DCDC3_V_OUT, 0x3f, AXP22X_PWR_OUT_CTRL1, BIT(3)),
+ AXP_DESC(AXP22X, DCDC4, "dcdc4", "vin4", 600, 1540, 20,
+ AXP22X_DCDC4_V_OUT, 0x3f, AXP22X_PWR_OUT_CTRL1, BIT(4)),
+ AXP_DESC(AXP22X, DCDC5, "dcdc5", "vin5", 1000, 2550, 50,
+ AXP22X_DCDC5_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(5)),
+ /* secondary switchable output of DCDC1 */
+ AXP_DESC_SW(AXP22X, DC1SW, "dc1sw", NULL, 1600, 3400, 100,
+ AXP22X_DCDC1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(7)),
+ /* LDO regulator internally chained to DCDC5 */
+ AXP_DESC(AXP22X, DC5LDO, "dc5ldo", NULL, 700, 1400, 100,
+ AXP22X_DC5LDO_V_OUT, 0x7, AXP22X_PWR_OUT_CTRL1, BIT(0)),
+ AXP_DESC(AXP22X, ALDO1, "aldo1", "aldoin", 700, 3300, 100,
+ AXP22X_ALDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(6)),
+ AXP_DESC(AXP22X, ALDO2, "aldo2", "aldoin", 700, 3300, 100,
+ AXP22X_ALDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(7)),
+ AXP_DESC(AXP22X, ALDO3, "aldo3", "aldoin", 700, 3300, 100,
+ AXP22X_ALDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(7)),
+ AXP_DESC(AXP22X, DLDO1, "dldo1", "dldoin", 700, 3300, 100,
+ AXP22X_DLDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(3)),
+ AXP_DESC(AXP22X, DLDO2, "dldo2", "dldoin", 700, 3300, 100,
+ AXP22X_DLDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(4)),
+ AXP_DESC(AXP22X, DLDO3, "dldo3", "dldoin", 700, 3300, 100,
+ AXP22X_DLDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(5)),
+ AXP_DESC(AXP22X, DLDO4, "dldo4", "dldoin", 700, 3300, 100,
+ AXP22X_DLDO4_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(6)),
+ AXP_DESC(AXP22X, ELDO1, "eldo1", "eldoin", 700, 3300, 100,
+ AXP22X_ELDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(0)),
+ AXP_DESC(AXP22X, ELDO2, "eldo2", "eldoin", 700, 3300, 100,
+ AXP22X_ELDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(1)),
+ AXP_DESC(AXP22X, ELDO3, "eldo3", "eldoin", 700, 3300, 100,
+ AXP22X_ELDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(2)),
+ AXP_DESC_IO(AXP22X, LDO_IO0, "ldo_io0", "ips", 1800, 3300, 100,
+ AXP22X_LDO_IO0_V_OUT, 0x1f, AXP20X_GPIO0_CTRL, 0x07,
+ AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
+ AXP_DESC_IO(AXP22X, LDO_IO1, "ldo_io1", "ips", 1800, 3300, 100,
+ AXP22X_LDO_IO1_V_OUT, 0x1f, AXP20X_GPIO1_CTRL, 0x07,
+ AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
+ AXP_DESC_FIXED(AXP22X, RTC_LDO, "rtc_ldo", "ips", 3000),
};
static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
{
struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
+ u32 min, max, def, step;
+
+ switch (axp20x->variant) {
+ case AXP202_ID:
+ case AXP209_ID:
+ min = 750;
+ max = 1875;
+ def = 1500;
+ step = 75;
+ break;
+ case AXP221_ID:
+ min = 1800;
+ max = 4050;
+ def = 3000;
+ step = 150;
+ break;
+ default:
+ dev_err(&pdev->dev,
+ "Setting DCDC frequency for unsupported AXP variant\n");
+ return -EINVAL;
+ }
+
+ if (dcdcfreq == 0)
+ dcdcfreq = def;
- if (dcdcfreq < 750) {
- dcdcfreq = 750;
- dev_warn(&pdev->dev, "DCDC frequency too low. Set to 750kHz\n");
+ if (dcdcfreq < min) {
+ dcdcfreq = min;
+ dev_warn(&pdev->dev, "DCDC frequency too low. Set to %ukHz\n",
+ min);
}
- if (dcdcfreq > 1875) {
- dcdcfreq = 1875;
- dev_warn(&pdev->dev, "DCDC frequency too high. Set to 1875kHz\n");
+ if (dcdcfreq > max) {
+ dcdcfreq = max;
+ dev_warn(&pdev->dev, "DCDC frequency too high. Set to %ukHz\n",
+ max);
}
- dcdcfreq = (dcdcfreq - 750) / 75;
+ dcdcfreq = (dcdcfreq - min) / step;
return regmap_update_bits(axp20x->regmap, AXP20X_DCDC_FREQ,
AXP20X_FREQ_DCDC_MASK, dcdcfreq);
{
struct device_node *np, *regulators;
int ret;
- u32 dcdcfreq;
+ u32 dcdcfreq = 0;
np = of_node_get(pdev->dev.parent->of_node);
if (!np)
if (!regulators) {
dev_warn(&pdev->dev, "regulators node not found\n");
} else {
- dcdcfreq = 1500;
of_property_read_u32(regulators, "x-powers,dcdc-freq", &dcdcfreq);
ret = axp20x_set_dcdc_freq(pdev, dcdcfreq);
if (ret < 0) {
static int axp20x_set_dcdc_workmode(struct regulator_dev *rdev, int id, u32 workmode)
{
- unsigned int mask = AXP20X_WORKMODE_DCDC2_MASK;
+ struct axp20x_dev *axp20x = rdev_get_drvdata(rdev);
+ unsigned int mask;
- if ((id != AXP20X_DCDC2) && (id != AXP20X_DCDC3))
- return -EINVAL;
+ switch (axp20x->variant) {
+ case AXP202_ID:
+ case AXP209_ID:
+ if ((id != AXP20X_DCDC2) && (id != AXP20X_DCDC3))
+ return -EINVAL;
+
+ mask = AXP20X_WORKMODE_DCDC2_MASK;
+ if (id == AXP20X_DCDC3)
+ mask = AXP20X_WORKMODE_DCDC3_MASK;
- if (id == AXP20X_DCDC3)
- mask = AXP20X_WORKMODE_DCDC3_MASK;
+ workmode <<= ffs(mask) - 1;
+ break;
- workmode <<= ffs(mask) - 1;
+ case AXP221_ID:
+ if (id < AXP22X_DCDC1 || id > AXP22X_DCDC5)
+ return -EINVAL;
+
+ mask = AXP22X_WORKMODE_DCDCX_MASK(id - AXP22X_DCDC1);
+ workmode <<= id - AXP22X_DCDC1;
+ break;
+
+ default:
+ /* should not happen */
+ WARN_ON(1);
+ return -EINVAL;
+ }
return regmap_update_bits(rdev->regmap, AXP20X_DCDC_MODE, mask, workmode);
}
{
struct regulator_dev *rdev;
struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
+ const struct regulator_desc *regulators;
struct regulator_config config = {
.dev = pdev->dev.parent,
.regmap = axp20x->regmap,
+ .driver_data = axp20x,
};
- int ret, i;
+ int ret, i, nregulators;
u32 workmode;
+ const char *axp22x_dc1_name = axp22x_regulators[AXP22X_DCDC1].name;
+ const char *axp22x_dc5_name = axp22x_regulators[AXP22X_DCDC5].name;
+
+ switch (axp20x->variant) {
+ case AXP202_ID:
+ case AXP209_ID:
+ regulators = axp20x_regulators;
+ nregulators = AXP20X_REG_ID_MAX;
+ break;
+ case AXP221_ID:
+ regulators = axp22x_regulators;
+ nregulators = AXP22X_REG_ID_MAX;
+ break;
+ default:
+ dev_err(&pdev->dev, "Unsupported AXP variant: %ld\n",
+ axp20x->variant);
+ return -EINVAL;
+ }
/* This only sets the dcdc freq. Ignore any errors */
axp20x_regulator_parse_dt(pdev);
- for (i = 0; i < AXP20X_REG_ID_MAX; i++) {
- rdev = devm_regulator_register(&pdev->dev, &axp20x_regulators[i],
- &config);
+ for (i = 0; i < nregulators; i++) {
+ const struct regulator_desc *desc = ®ulators[i];
+ struct regulator_desc *new_desc;
+
+ /*
+ * Regulators DC1SW and DC5LDO are connected internally,
+ * so we have to handle their supply names separately.
+ *
+ * We always register the regulators in proper sequence,
+ * so the supply names are correctly read. See the last
+ * part of this loop to see where we save the DT defined
+ * name.
+ */
+ if (regulators == axp22x_regulators) {
+ if (i == AXP22X_DC1SW) {
+ new_desc = devm_kzalloc(&pdev->dev,
+ sizeof(*desc),
+ GFP_KERNEL);
+ *new_desc = regulators[i];
+ new_desc->supply_name = axp22x_dc1_name;
+ desc = new_desc;
+ } else if (i == AXP22X_DC5LDO) {
+ new_desc = devm_kzalloc(&pdev->dev,
+ sizeof(*desc),
+ GFP_KERNEL);
+ *new_desc = regulators[i];
+ new_desc->supply_name = axp22x_dc5_name;
+ desc = new_desc;
+ }
+ }
+
+ rdev = devm_regulator_register(&pdev->dev, desc, &config);
if (IS_ERR(rdev)) {
dev_err(&pdev->dev, "Failed to register %s\n",
- axp20x_regulators[i].name);
+ regulators[i].name);
return PTR_ERR(rdev);
}
if (!ret) {
if (axp20x_set_dcdc_workmode(rdev, i, workmode))
dev_err(&pdev->dev, "Failed to set workmode on %s\n",
- axp20x_regulators[i].name);
+ rdev->desc->name);
+ }
+
+ /*
+ * Save AXP22X DCDC1 / DCDC5 regulator names for later.
+ */
+ if (regulators == axp22x_regulators) {
+ /* Can we use rdev->constraints->name instead? */
+ if (i == AXP22X_DCDC1)
+ of_property_read_string(rdev->dev.of_node,
+ "regulator-name",
+ &axp22x_dc1_name);
+ else if (i == AXP22X_DCDC5)
+ of_property_read_string(rdev->dev.of_node,
+ "regulator-name",
+ &axp22x_dc5_name);
}
}
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Carlo Caione <carlo@caione.org>");
MODULE_DESCRIPTION("Regulator Driver for AXP20X PMIC");
+MODULE_ALIAS("platform:axp20x-regulator");
Code Review / kvmfornfv.git / blobdiff