These changes are the raw update to linux-4.4.6-rt14. Kernel sources

[kvmfornfv.git] / kernel / drivers / regulator / Kconfig

diff --git a/kernel/drivers/regulator/Kconfig b/kernel/drivers/regulator/Kconfig
index a6f116a..0067620 100644 (file)
--- a/kernel/drivers/regulator/Kconfig
+++ b/kernel/drivers/regulator/Kconfig
@@ -178,6 +178,16 @@ config REGULATOR_DA9055
          This driver can also be built as a module. If so, the module
          will be called da9055-regulator.
 
+config REGULATOR_DA9062
+       tristate "Dialog Semiconductor DA9062 regulators"
+       depends on MFD_DA9062
+       help
+         Say y here to support the BUCKs and LDOs regulators found on
+         DA9062 PMICs.
+
+         This driver can also be built as a module. If so, the module
+         will be called da9062-regulator.
+
 config REGULATOR_DA9063
        tristate "Dialog Semiconductor DA9063 regulators"
        depends on MFD_DA9063
@@ -199,13 +209,13 @@ config REGULATOR_DA9210
          interface.
 
 config REGULATOR_DA9211
-       tristate "Dialog Semiconductor DA9211/DA9212/DA9213/DA9214 regulator"
+       tristate "Dialog Semiconductor DA9211/DA9212/DA9213/DA9214/DA9215 regulator"
        depends on I2C
        select REGMAP_I2C
        help
          Say y here to support for the Dialog Semiconductor DA9211/DA9212
-         /DA9213/DA9214.
-         The DA9211/DA9212/DA9213/DA9214 is a multi-phase synchronous
+         /DA9213/DA9214/DA9215.
+         The DA9211/DA9212/DA9213/DA9214/DA9215 is a multi-phase synchronous
          step down converter 12A or 16A DC-DC Buck controlled through an I2C
          interface.
 
@@ -233,7 +243,7 @@ config REGULATOR_FAN53555
 
 config REGULATOR_GPIO
        tristate "GPIO regulator support"
-       depends on GPIOLIB
+       depends on GPIOLIB || COMPILE_TEST
        help
          This driver provides support for regulators that can be
          controlled via gpios.
@@ -397,13 +407,13 @@ config REGULATOR_MAX77686
          Exynos-4 chips to control VARM and VINT voltages.
 
 config REGULATOR_MAX77693
-       tristate "Maxim MAX77693 regulator"
-       depends on MFD_MAX77693
+       tristate "Maxim 77693/77843 regulator"
+       depends on (MFD_MAX77693 || MFD_MAX77843)
        help
-         This driver controls a Maxim 77693 regulator via I2C bus.
+         This driver controls a Maxim 77693/77843 regulators via I2C bus.
          The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2'
          and one current regulator 'CHARGER'. This is suitable for
-         Exynos-4x12 chips.
+         Exynos-4x12 (MAX77693) or Exynos5433 (MAX77843) SoC chips.
 
 config REGULATOR_MAX77802
        tristate "Maxim 77802 regulator"
@@ -414,14 +424,6 @@ config REGULATOR_MAX77802
          Exynos5420/Exynos5800 SoCs to control various voltages.
          It includes support for control of voltage and ramp speed.
 
-config REGULATOR_MAX77843
-       tristate "Maxim 77843 regulator"
-       depends on MFD_MAX77843
-       help
-         This driver controls a Maxim 77843 regulator.
-         The regulator include two 'SAFEOUT' for USB(Universal Serial Bus)
-         This is suitable for Exynos5433 SoC chips.
-
 config REGULATOR_MC13XXX_CORE
        tristate
 
@@ -441,6 +443,16 @@ config REGULATOR_MC13892
          Say y here to support the regulators found on the Freescale MC13892
          PMIC.
 
+config REGULATOR_MT6311
+       tristate "MediaTek MT6311 PMIC"
+       depends on I2C
+       select REGMAP_I2C
+       help
+         Say y here to select this option to enable the power regulator of
+         MediaTek MT6311 PMIC.
+         This driver supports the control of different power rails of device
+         through regulator interface.
+
 config REGULATOR_MT6397
        tristate "MediaTek MT6397 PMIC"
        depends on MFD_MT6397
@@ -512,6 +524,29 @@ config REGULATOR_QCOM_RPM
          Qualcomm RPM as a module. The module will be named
          "qcom_rpm-regulator".
 
+config REGULATOR_QCOM_SMD_RPM
+       tristate "Qualcomm SMD based RPM regulator driver"
+       depends on QCOM_SMD_RPM
+       help
+         If you say yes to this option, support will be included for the
+         regulators exposed by the Resource Power Manager found in Qualcomm
+         8974 based devices.
+
+         Say M here if you want to include support for the regulators on the
+         Qualcomm RPM as a module. The module will be named
+         "qcom_smd-regulator".
+
+config REGULATOR_QCOM_SPMI
+       tristate "Qualcomm SPMI regulator driver"
+       depends on SPMI || COMPILE_TEST
+       help
+         If you say yes to this option, support will be included for the
+         regulators found in Qualcomm SPMI PMICs.
+
+         Say M here if you want to include support for the regulators on the
+         Qualcomm SPMI PMICs as a module. The module will be named
+         "qcom_spmi-regulator".
+
 config REGULATOR_RC5T583
        tristate "RICOH RC5T583 Power regulators"
        depends on MFD_RC5T583
@@ -593,7 +628,7 @@ config REGULATOR_TI_ABB
 
 config REGULATOR_STW481X_VMMC
        bool "ST Microelectronics STW481X VMMC regulator"
-       depends on MFD_STW481X
+       depends on MFD_STW481X || COMPILE_TEST
        default y if MFD_STW481X
        help
          This driver supports the internal VMMC regulator in the STw481x