--- /dev/null
+/*
+ * axp288_charger.c - X-power AXP288 PMIC Charger driver
+ *
+ * Copyright (C) 2014 Intel Corporation
+ * Author: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/regmap.h>
+#include <linux/workqueue.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/usb/otg.h>
+#include <linux/notifier.h>
+#include <linux/power_supply.h>
+#include <linux/notifier.h>
+#include <linux/property.h>
+#include <linux/mfd/axp20x.h>
+#include <linux/extcon.h>
+
+#define PS_STAT_VBUS_TRIGGER (1 << 0)
+#define PS_STAT_BAT_CHRG_DIR (1 << 2)
+#define PS_STAT_VBAT_ABOVE_VHOLD (1 << 3)
+#define PS_STAT_VBUS_VALID (1 << 4)
+#define PS_STAT_VBUS_PRESENT (1 << 5)
+
+#define CHRG_STAT_BAT_SAFE_MODE (1 << 3)
+#define CHRG_STAT_BAT_VALID (1 << 4)
+#define CHRG_STAT_BAT_PRESENT (1 << 5)
+#define CHRG_STAT_CHARGING (1 << 6)
+#define CHRG_STAT_PMIC_OTP (1 << 7)
+
+#define VBUS_ISPOUT_CUR_LIM_MASK 0x03
+#define VBUS_ISPOUT_CUR_LIM_BIT_POS 0
+#define VBUS_ISPOUT_CUR_LIM_900MA 0x0 /* 900mA */
+#define VBUS_ISPOUT_CUR_LIM_1500MA 0x1 /* 1500mA */
+#define VBUS_ISPOUT_CUR_LIM_2000MA 0x2 /* 2000mA */
+#define VBUS_ISPOUT_CUR_NO_LIM 0x3 /* 2500mA */
+#define VBUS_ISPOUT_VHOLD_SET_MASK 0x31
+#define VBUS_ISPOUT_VHOLD_SET_BIT_POS 0x3
+#define VBUS_ISPOUT_VHOLD_SET_OFFSET 4000 /* 4000mV */
+#define VBUS_ISPOUT_VHOLD_SET_LSB_RES 100 /* 100mV */
+#define VBUS_ISPOUT_VHOLD_SET_4300MV 0x3 /* 4300mV */
+#define VBUS_ISPOUT_VBUS_PATH_DIS (1 << 7)
+
+#define CHRG_CCCV_CC_MASK 0xf /* 4 bits */
+#define CHRG_CCCV_CC_BIT_POS 0
+#define CHRG_CCCV_CC_OFFSET 200 /* 200mA */
+#define CHRG_CCCV_CC_LSB_RES 200 /* 200mA */
+#define CHRG_CCCV_ITERM_20P (1 << 4) /* 20% of CC */
+#define CHRG_CCCV_CV_MASK 0x60 /* 2 bits */
+#define CHRG_CCCV_CV_BIT_POS 5
+#define CHRG_CCCV_CV_4100MV 0x0 /* 4.10V */
+#define CHRG_CCCV_CV_4150MV 0x1 /* 4.15V */
+#define CHRG_CCCV_CV_4200MV 0x2 /* 4.20V */
+#define CHRG_CCCV_CV_4350MV 0x3 /* 4.35V */
+#define CHRG_CCCV_CHG_EN (1 << 7)
+
+#define CNTL2_CC_TIMEOUT_MASK 0x3 /* 2 bits */
+#define CNTL2_CC_TIMEOUT_OFFSET 6 /* 6 Hrs */
+#define CNTL2_CC_TIMEOUT_LSB_RES 2 /* 2 Hrs */
+#define CNTL2_CC_TIMEOUT_12HRS 0x3 /* 12 Hrs */
+#define CNTL2_CHGLED_TYPEB (1 << 4)
+#define CNTL2_CHG_OUT_TURNON (1 << 5)
+#define CNTL2_PC_TIMEOUT_MASK 0xC0
+#define CNTL2_PC_TIMEOUT_OFFSET 40 /* 40 mins */
+#define CNTL2_PC_TIMEOUT_LSB_RES 10 /* 10 mins */
+#define CNTL2_PC_TIMEOUT_70MINS 0x3
+
+#define CHRG_ILIM_TEMP_LOOP_EN (1 << 3)
+#define CHRG_VBUS_ILIM_MASK 0xf0
+#define CHRG_VBUS_ILIM_BIT_POS 4
+#define CHRG_VBUS_ILIM_100MA 0x0 /* 100mA */
+#define CHRG_VBUS_ILIM_500MA 0x1 /* 500mA */
+#define CHRG_VBUS_ILIM_900MA 0x2 /* 900mA */
+#define CHRG_VBUS_ILIM_1500MA 0x3 /* 1500mA */
+#define CHRG_VBUS_ILIM_2000MA 0x4 /* 2000mA */
+#define CHRG_VBUS_ILIM_2500MA 0x5 /* 2500mA */
+#define CHRG_VBUS_ILIM_3000MA 0x6 /* 3000mA */
+
+#define CHRG_VLTFC_0C 0xA5 /* 0 DegC */
+#define CHRG_VHTFC_45C 0x1F /* 45 DegC */
+
+#define BAT_IRQ_CFG_CHRG_DONE (1 << 2)
+#define BAT_IRQ_CFG_CHRG_START (1 << 3)
+#define BAT_IRQ_CFG_BAT_SAFE_EXIT (1 << 4)
+#define BAT_IRQ_CFG_BAT_SAFE_ENTER (1 << 5)
+#define BAT_IRQ_CFG_BAT_DISCON (1 << 6)
+#define BAT_IRQ_CFG_BAT_CONN (1 << 7)
+#define BAT_IRQ_CFG_BAT_MASK 0xFC
+
+#define TEMP_IRQ_CFG_QCBTU (1 << 4)
+#define TEMP_IRQ_CFG_CBTU (1 << 5)
+#define TEMP_IRQ_CFG_QCBTO (1 << 6)
+#define TEMP_IRQ_CFG_CBTO (1 << 7)
+#define TEMP_IRQ_CFG_MASK 0xF0
+
+#define FG_CNTL_OCV_ADJ_EN (1 << 3)
+
+#define CV_4100MV 4100 /* 4100mV */
+#define CV_4150MV 4150 /* 4150mV */
+#define CV_4200MV 4200 /* 4200mV */
+#define CV_4350MV 4350 /* 4350mV */
+
+#define CC_200MA 200 /* 200mA */
+#define CC_600MA 600 /* 600mA */
+#define CC_800MA 800 /* 800mA */
+#define CC_1000MA 1000 /* 1000mA */
+#define CC_1600MA 1600 /* 1600mA */
+#define CC_2000MA 2000 /* 2000mA */
+
+#define ILIM_100MA 100 /* 100mA */
+#define ILIM_500MA 500 /* 500mA */
+#define ILIM_900MA 900 /* 900mA */
+#define ILIM_1500MA 1500 /* 1500mA */
+#define ILIM_2000MA 2000 /* 2000mA */
+#define ILIM_2500MA 2500 /* 2500mA */
+#define ILIM_3000MA 3000 /* 3000mA */
+
+#define AXP288_EXTCON_DEV_NAME "axp288_extcon"
+
+#define AXP288_EXTCON_SLOW_CHARGER "SLOW-CHARGER"
+#define AXP288_EXTCON_DOWNSTREAM_CHARGER "CHARGE-DOWNSTREAM"
+#define AXP288_EXTCON_FAST_CHARGER "FAST-CHARGER"
+
+enum {
+ VBUS_OV_IRQ = 0,
+ CHARGE_DONE_IRQ,
+ CHARGE_CHARGING_IRQ,
+ BAT_SAFE_QUIT_IRQ,
+ BAT_SAFE_ENTER_IRQ,
+ QCBTU_IRQ,
+ CBTU_IRQ,
+ QCBTO_IRQ,
+ CBTO_IRQ,
+ CHRG_INTR_END,
+};
+
+struct axp288_chrg_info {
+ struct platform_device *pdev;
+ struct axp20x_chrg_pdata *pdata;
+ struct regmap *regmap;
+ struct regmap_irq_chip_data *regmap_irqc;
+ int irq[CHRG_INTR_END];
+ struct power_supply *psy_usb;
+ struct mutex lock;
+
+ /* OTG/Host mode */
+ struct {
+ struct work_struct work;
+ struct extcon_specific_cable_nb cable;
+ struct notifier_block id_nb;
+ bool id_short;
+ } otg;
+
+ /* SDP/CDP/DCP USB charging cable notifications */
+ struct {
+ struct extcon_dev *edev;
+ bool connected;
+ enum power_supply_type chg_type;
+ struct notifier_block nb;
+ struct work_struct work;
+ } cable;
+
+ int health;
+ int inlmt;
+ int cc;
+ int cv;
+ int max_cc;
+ int max_cv;
+ bool online;
+ bool present;
+ bool enable_charger;
+ bool is_charger_enabled;
+};
+
+static inline int axp288_charger_set_cc(struct axp288_chrg_info *info, int cc)
+{
+ u8 reg_val;
+ int ret;
+
+ if (cc < CHRG_CCCV_CC_OFFSET)
+ cc = CHRG_CCCV_CC_OFFSET;
+ else if (cc > info->max_cc)
+ cc = info->max_cc;
+
+ reg_val = (cc - CHRG_CCCV_CC_OFFSET) / CHRG_CCCV_CC_LSB_RES;
+ cc = (reg_val * CHRG_CCCV_CC_LSB_RES) + CHRG_CCCV_CC_OFFSET;
+ reg_val = reg_val << CHRG_CCCV_CC_BIT_POS;
+
+ ret = regmap_update_bits(info->regmap,
+ AXP20X_CHRG_CTRL1,
+ CHRG_CCCV_CC_MASK, reg_val);
+ if (ret >= 0)
+ info->cc = cc;
+
+ return ret;
+}
+
+static inline int axp288_charger_set_cv(struct axp288_chrg_info *info, int cv)
+{
+ u8 reg_val;
+ int ret;
+
+ if (cv <= CV_4100MV) {
+ reg_val = CHRG_CCCV_CV_4100MV;
+ cv = CV_4100MV;
+ } else if (cv <= CV_4150MV) {
+ reg_val = CHRG_CCCV_CV_4150MV;
+ cv = CV_4150MV;
+ } else if (cv <= CV_4200MV) {
+ reg_val = CHRG_CCCV_CV_4200MV;
+ cv = CV_4200MV;
+ } else {
+ reg_val = CHRG_CCCV_CV_4350MV;
+ cv = CV_4350MV;
+ }
+
+ reg_val = reg_val << CHRG_CCCV_CV_BIT_POS;
+
+ ret = regmap_update_bits(info->regmap,
+ AXP20X_CHRG_CTRL1,
+ CHRG_CCCV_CV_MASK, reg_val);
+
+ if (ret >= 0)
+ info->cv = cv;
+
+ return ret;
+}
+
+static inline int axp288_charger_set_vbus_inlmt(struct axp288_chrg_info *info,
+ int inlmt)
+{
+ int ret;
+ unsigned int val;
+ u8 reg_val;
+
+ /* Read in limit register */
+ ret = regmap_read(info->regmap, AXP20X_CHRG_BAK_CTRL, &val);
+ if (ret < 0)
+ goto set_inlmt_fail;
+
+ if (inlmt <= ILIM_100MA) {
+ reg_val = CHRG_VBUS_ILIM_100MA;
+ inlmt = ILIM_100MA;
+ } else if (inlmt <= ILIM_500MA) {
+ reg_val = CHRG_VBUS_ILIM_500MA;
+ inlmt = ILIM_500MA;
+ } else if (inlmt <= ILIM_900MA) {
+ reg_val = CHRG_VBUS_ILIM_900MA;
+ inlmt = ILIM_900MA;
+ } else if (inlmt <= ILIM_1500MA) {
+ reg_val = CHRG_VBUS_ILIM_1500MA;
+ inlmt = ILIM_1500MA;
+ } else if (inlmt <= ILIM_2000MA) {
+ reg_val = CHRG_VBUS_ILIM_2000MA;
+ inlmt = ILIM_2000MA;
+ } else if (inlmt <= ILIM_2500MA) {
+ reg_val = CHRG_VBUS_ILIM_2500MA;
+ inlmt = ILIM_2500MA;
+ } else {
+ reg_val = CHRG_VBUS_ILIM_3000MA;
+ inlmt = ILIM_3000MA;
+ }
+
+ reg_val = (val & ~CHRG_VBUS_ILIM_MASK)
+ | (reg_val << CHRG_VBUS_ILIM_BIT_POS);
+ ret = regmap_write(info->regmap, AXP20X_CHRG_BAK_CTRL, reg_val);
+ if (ret >= 0)
+ info->inlmt = inlmt;
+ else
+ dev_err(&info->pdev->dev, "charger BAK control %d\n", ret);
+
+
+set_inlmt_fail:
+ return ret;
+}
+
+static int axp288_charger_vbus_path_select(struct axp288_chrg_info *info,
+ bool enable)
+{
+ int ret;
+
+ if (enable)
+ ret = regmap_update_bits(info->regmap, AXP20X_VBUS_IPSOUT_MGMT,
+ VBUS_ISPOUT_VBUS_PATH_DIS, 0);
+ else
+ ret = regmap_update_bits(info->regmap, AXP20X_VBUS_IPSOUT_MGMT,
+ VBUS_ISPOUT_VBUS_PATH_DIS, VBUS_ISPOUT_VBUS_PATH_DIS);
+
+ if (ret < 0)
+ dev_err(&info->pdev->dev, "axp288 vbus path select %d\n", ret);
+
+
+ return ret;
+}
+
+static int axp288_charger_enable_charger(struct axp288_chrg_info *info,
+ bool enable)
+{
+ int ret;
+
+ if (enable)
+ ret = regmap_update_bits(info->regmap, AXP20X_CHRG_CTRL1,
+ CHRG_CCCV_CHG_EN, CHRG_CCCV_CHG_EN);
+ else
+ ret = regmap_update_bits(info->regmap, AXP20X_CHRG_CTRL1,
+ CHRG_CCCV_CHG_EN, 0);
+ if (ret < 0)
+ dev_err(&info->pdev->dev, "axp288 enable charger %d\n", ret);
+ else
+ info->is_charger_enabled = enable;
+
+ return ret;
+}
+
+static int axp288_charger_is_present(struct axp288_chrg_info *info)
+{
+ int ret, present = 0;
+ unsigned int val;
+
+ ret = regmap_read(info->regmap, AXP20X_PWR_INPUT_STATUS, &val);
+ if (ret < 0)
+ return ret;
+
+ if (val & PS_STAT_VBUS_PRESENT)
+ present = 1;
+ return present;
+}
+
+static int axp288_charger_is_online(struct axp288_chrg_info *info)
+{
+ int ret, online = 0;
+ unsigned int val;
+
+ ret = regmap_read(info->regmap, AXP20X_PWR_INPUT_STATUS, &val);
+ if (ret < 0)
+ return ret;
+
+ if (val & PS_STAT_VBUS_VALID)
+ online = 1;
+ return online;
+}
+
+static int axp288_get_charger_health(struct axp288_chrg_info *info)
+{
+ int ret, pwr_stat, chrg_stat;
+ int health = POWER_SUPPLY_HEALTH_UNKNOWN;
+ unsigned int val;
+
+ ret = regmap_read(info->regmap, AXP20X_PWR_INPUT_STATUS, &val);
+ if ((ret < 0) || !(val & PS_STAT_VBUS_PRESENT))
+ goto health_read_fail;
+ else
+ pwr_stat = val;
+
+ ret = regmap_read(info->regmap, AXP20X_PWR_OP_MODE, &val);
+ if (ret < 0)
+ goto health_read_fail;
+ else
+ chrg_stat = val;
+
+ if (!(pwr_stat & PS_STAT_VBUS_VALID))
+ health = POWER_SUPPLY_HEALTH_DEAD;
+ else if (chrg_stat & CHRG_STAT_PMIC_OTP)
+ health = POWER_SUPPLY_HEALTH_OVERHEAT;
+ else if (chrg_stat & CHRG_STAT_BAT_SAFE_MODE)
+ health = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
+ else
+ health = POWER_SUPPLY_HEALTH_GOOD;
+
+health_read_fail:
+ return health;
+}
+
+static int axp288_charger_usb_set_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ const union power_supply_propval *val)
+{
+ struct axp288_chrg_info *info = power_supply_get_drvdata(psy);
+ int ret = 0;
+ int scaled_val;
+
+ mutex_lock(&info->lock);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+ scaled_val = min(val->intval, info->max_cc);
+ scaled_val = DIV_ROUND_CLOSEST(scaled_val, 1000);
+ ret = axp288_charger_set_cc(info, scaled_val);
+ if (ret < 0)
+ dev_warn(&info->pdev->dev, "set charge current failed\n");
+ break;
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+ scaled_val = min(val->intval, info->max_cv);
+ scaled_val = DIV_ROUND_CLOSEST(scaled_val, 1000);
+ ret = axp288_charger_set_cv(info, scaled_val);
+ if (ret < 0)
+ dev_warn(&info->pdev->dev, "set charge voltage failed\n");
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ mutex_unlock(&info->lock);
+ return ret;
+}
+
+static int axp288_charger_usb_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct axp288_chrg_info *info = power_supply_get_drvdata(psy);
+ int ret = 0;
+
+ mutex_lock(&info->lock);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_PRESENT:
+ /* Check for OTG case first */
+ if (info->otg.id_short) {
+ val->intval = 0;
+ break;
+ }
+ ret = axp288_charger_is_present(info);
+ if (ret < 0)
+ goto psy_get_prop_fail;
+ info->present = ret;
+ val->intval = info->present;
+ break;
+ case POWER_SUPPLY_PROP_ONLINE:
+ /* Check for OTG case first */
+ if (info->otg.id_short) {
+ val->intval = 0;
+ break;
+ }
+ ret = axp288_charger_is_online(info);
+ if (ret < 0)
+ goto psy_get_prop_fail;
+ info->online = ret;
+ val->intval = info->online;
+ break;
+ case POWER_SUPPLY_PROP_HEALTH:
+ val->intval = axp288_get_charger_health(info);
+ break;
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+ val->intval = info->cc * 1000;
+ break;
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+ val->intval = info->max_cc * 1000;
+ break;
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+ val->intval = info->cv * 1000;
+ break;
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+ val->intval = info->max_cv * 1000;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT:
+ val->intval = info->inlmt * 1000;
+ break;
+ default:
+ ret = -EINVAL;
+ goto psy_get_prop_fail;
+ }
+
+psy_get_prop_fail:
+ mutex_unlock(&info->lock);
+ return ret;
+}
+
+static int axp288_charger_property_is_writeable(struct power_supply *psy,
+ enum power_supply_property psp)
+{
+ int ret;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+ ret = 1;
+ break;
+ default:
+ ret = 0;
+ }
+
+ return ret;
+}
+
+static enum power_supply_property axp288_usb_props[] = {
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_TYPE,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
+ POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT,
+};
+
+static const struct power_supply_desc axp288_charger_desc = {
+ .name = "axp288_charger",
+ .type = POWER_SUPPLY_TYPE_USB,
+ .properties = axp288_usb_props,
+ .num_properties = ARRAY_SIZE(axp288_usb_props),
+ .get_property = axp288_charger_usb_get_property,
+ .set_property = axp288_charger_usb_set_property,
+ .property_is_writeable = axp288_charger_property_is_writeable,
+};
+
+static irqreturn_t axp288_charger_irq_thread_handler(int irq, void *dev)
+{
+ struct axp288_chrg_info *info = dev;
+ int i;
+
+ for (i = 0; i < CHRG_INTR_END; i++) {
+ if (info->irq[i] == irq)
+ break;
+ }
+
+ if (i >= CHRG_INTR_END) {
+ dev_warn(&info->pdev->dev, "spurious interrupt!!\n");
+ return IRQ_NONE;
+ }
+
+ switch (i) {
+ case VBUS_OV_IRQ:
+ dev_dbg(&info->pdev->dev, "VBUS Over Voltage INTR\n");
+ break;
+ case CHARGE_DONE_IRQ:
+ dev_dbg(&info->pdev->dev, "Charging Done INTR\n");
+ break;
+ case CHARGE_CHARGING_IRQ:
+ dev_dbg(&info->pdev->dev, "Start Charging IRQ\n");
+ break;
+ case BAT_SAFE_QUIT_IRQ:
+ dev_dbg(&info->pdev->dev,
+ "Quit Safe Mode(restart timer) Charging IRQ\n");
+ break;
+ case BAT_SAFE_ENTER_IRQ:
+ dev_dbg(&info->pdev->dev,
+ "Enter Safe Mode(timer expire) Charging IRQ\n");
+ break;
+ case QCBTU_IRQ:
+ dev_dbg(&info->pdev->dev,
+ "Quit Battery Under Temperature(CHRG) INTR\n");
+ break;
+ case CBTU_IRQ:
+ dev_dbg(&info->pdev->dev,
+ "Hit Battery Under Temperature(CHRG) INTR\n");
+ break;
+ case QCBTO_IRQ:
+ dev_dbg(&info->pdev->dev,
+ "Quit Battery Over Temperature(CHRG) INTR\n");
+ break;
+ case CBTO_IRQ:
+ dev_dbg(&info->pdev->dev,
+ "Hit Battery Over Temperature(CHRG) INTR\n");
+ break;
+ default:
+ dev_warn(&info->pdev->dev, "Spurious Interrupt!!!\n");
+ goto out;
+ }
+
+ power_supply_changed(info->psy_usb);
+out:
+ return IRQ_HANDLED;
+}
+
+static void axp288_charger_extcon_evt_worker(struct work_struct *work)
+{
+ struct axp288_chrg_info *info =
+ container_of(work, struct axp288_chrg_info, cable.work);
+ int ret, current_limit;
+ bool changed = false;
+ struct extcon_dev *edev = info->cable.edev;
+ bool old_connected = info->cable.connected;
+
+ /* Determine cable/charger type */
+ if (extcon_get_cable_state(edev, AXP288_EXTCON_SLOW_CHARGER) > 0) {
+ dev_dbg(&info->pdev->dev, "USB SDP charger is connected");
+ info->cable.connected = true;
+ info->cable.chg_type = POWER_SUPPLY_TYPE_USB;
+ } else if (extcon_get_cable_state(edev,
+ AXP288_EXTCON_DOWNSTREAM_CHARGER) > 0) {
+ dev_dbg(&info->pdev->dev, "USB CDP charger is connected");
+ info->cable.connected = true;
+ info->cable.chg_type = POWER_SUPPLY_TYPE_USB_CDP;
+ } else if (extcon_get_cable_state(edev,
+ AXP288_EXTCON_FAST_CHARGER) > 0) {
+ dev_dbg(&info->pdev->dev, "USB DCP charger is connected");
+ info->cable.connected = true;
+ info->cable.chg_type = POWER_SUPPLY_TYPE_USB_DCP;
+ } else {
+ if (old_connected)
+ dev_dbg(&info->pdev->dev, "USB charger disconnected");
+ info->cable.connected = false;
+ info->cable.chg_type = POWER_SUPPLY_TYPE_USB;
+ }
+
+ /* Cable status changed */
+ if (old_connected != info->cable.connected)
+ changed = true;
+
+ if (!changed)
+ return;
+
+ mutex_lock(&info->lock);
+
+ if (info->is_charger_enabled && !info->cable.connected) {
+ info->enable_charger = false;
+ ret = axp288_charger_enable_charger(info, info->enable_charger);
+ if (ret < 0)
+ dev_err(&info->pdev->dev,
+ "cannot disable charger (%d)", ret);
+
+ } else if (!info->is_charger_enabled && info->cable.connected) {
+ switch (info->cable.chg_type) {
+ case POWER_SUPPLY_TYPE_USB:
+ current_limit = ILIM_500MA;
+ break;
+ case POWER_SUPPLY_TYPE_USB_CDP:
+ current_limit = ILIM_1500MA;
+ break;
+ case POWER_SUPPLY_TYPE_USB_DCP:
+ current_limit = ILIM_2000MA;
+ break;
+ default:
+ /* Unknown */
+ current_limit = 0;
+ break;
+ }
+
+ /* Set vbus current limit first, then enable charger */
+ ret = axp288_charger_set_vbus_inlmt(info, current_limit);
+ if (ret < 0) {
+ dev_err(&info->pdev->dev,
+ "error setting current limit (%d)", ret);
+ } else {
+ info->enable_charger = (current_limit > 0);
+ ret = axp288_charger_enable_charger(info,
+ info->enable_charger);
+ if (ret < 0)
+ dev_err(&info->pdev->dev,
+ "cannot enable charger (%d)", ret);
+ }
+ }
+
+ if (changed)
+ info->health = axp288_get_charger_health(info);
+
+ mutex_unlock(&info->lock);
+
+ if (changed)
+ power_supply_changed(info->psy_usb);
+}
+
+static int axp288_charger_handle_cable_evt(struct notifier_block *nb,
+ unsigned long event, void *param)
+{
+ struct axp288_chrg_info *info =
+ container_of(nb, struct axp288_chrg_info, cable.nb);
+
+ schedule_work(&info->cable.work);
+
+ return NOTIFY_OK;
+}
+
+static void axp288_charger_otg_evt_worker(struct work_struct *work)
+{
+ struct axp288_chrg_info *info =
+ container_of(work, struct axp288_chrg_info, otg.work);
+ int ret;
+
+ /* Disable VBUS path before enabling the 5V boost */
+ ret = axp288_charger_vbus_path_select(info, !info->otg.id_short);
+ if (ret < 0)
+ dev_warn(&info->pdev->dev, "vbus path disable failed\n");
+}
+
+static int axp288_charger_handle_otg_evt(struct notifier_block *nb,
+ unsigned long event, void *param)
+{
+ struct axp288_chrg_info *info =
+ container_of(nb, struct axp288_chrg_info, otg.id_nb);
+ struct extcon_dev *edev = param;
+ int usb_host = extcon_get_cable_state(edev, "USB-Host");
+
+ dev_dbg(&info->pdev->dev, "external connector USB-Host is %s\n",
+ usb_host ? "attached" : "detached");
+
+ /*
+ * Set usb_id_short flag to avoid running charger detection logic
+ * in case usb host.
+ */
+ info->otg.id_short = usb_host;
+ schedule_work(&info->otg.work);
+
+ return NOTIFY_OK;
+}
+
+static void charger_init_hw_regs(struct axp288_chrg_info *info)
+{
+ int ret, cc, cv;
+ unsigned int val;
+
+ /* Program temperature thresholds */
+ ret = regmap_write(info->regmap, AXP20X_V_LTF_CHRG, CHRG_VLTFC_0C);
+ if (ret < 0)
+ dev_warn(&info->pdev->dev, "register(%x) write error(%d)\n",
+ AXP20X_V_LTF_CHRG, ret);
+
+ ret = regmap_write(info->regmap, AXP20X_V_HTF_CHRG, CHRG_VHTFC_45C);
+ if (ret < 0)
+ dev_warn(&info->pdev->dev, "register(%x) write error(%d)\n",
+ AXP20X_V_HTF_CHRG, ret);
+
+ /* Do not turn-off charger o/p after charge cycle ends */
+ ret = regmap_update_bits(info->regmap,
+ AXP20X_CHRG_CTRL2,
+ CNTL2_CHG_OUT_TURNON, 1);
+ if (ret < 0)
+ dev_warn(&info->pdev->dev, "register(%x) write error(%d)\n",
+ AXP20X_CHRG_CTRL2, ret);
+
+ /* Enable interrupts */
+ ret = regmap_update_bits(info->regmap,
+ AXP20X_IRQ2_EN,
+ BAT_IRQ_CFG_BAT_MASK, 1);
+ if (ret < 0)
+ dev_warn(&info->pdev->dev, "register(%x) write error(%d)\n",
+ AXP20X_IRQ2_EN, ret);
+
+ ret = regmap_update_bits(info->regmap, AXP20X_IRQ3_EN,
+ TEMP_IRQ_CFG_MASK, 1);
+ if (ret < 0)
+ dev_warn(&info->pdev->dev, "register(%x) write error(%d)\n",
+ AXP20X_IRQ3_EN, ret);
+
+ /* Setup ending condition for charging to be 10% of I(chrg) */
+ ret = regmap_update_bits(info->regmap,
+ AXP20X_CHRG_CTRL1,
+ CHRG_CCCV_ITERM_20P, 0);
+ if (ret < 0)
+ dev_warn(&info->pdev->dev, "register(%x) write error(%d)\n",
+ AXP20X_CHRG_CTRL1, ret);
+
+ /* Disable OCV-SOC curve calibration */
+ ret = regmap_update_bits(info->regmap,
+ AXP20X_CC_CTRL,
+ FG_CNTL_OCV_ADJ_EN, 0);
+ if (ret < 0)
+ dev_warn(&info->pdev->dev, "register(%x) write error(%d)\n",
+ AXP20X_CC_CTRL, ret);
+
+ /* Init charging current and voltage */
+ info->max_cc = info->pdata->max_cc;
+ info->max_cv = info->pdata->max_cv;
+
+ /* Read current charge voltage and current limit */
+ ret = regmap_read(info->regmap, AXP20X_CHRG_CTRL1, &val);
+ if (ret < 0) {
+ /* Assume default if cannot read */
+ info->cc = info->pdata->def_cc;
+ info->cv = info->pdata->def_cv;
+ } else {
+ /* Determine charge voltage */
+ cv = (val & CHRG_CCCV_CV_MASK) >> CHRG_CCCV_CV_BIT_POS;
+ switch (cv) {
+ case CHRG_CCCV_CV_4100MV:
+ info->cv = CV_4100MV;
+ break;
+ case CHRG_CCCV_CV_4150MV:
+ info->cv = CV_4150MV;
+ break;
+ case CHRG_CCCV_CV_4200MV:
+ info->cv = CV_4200MV;
+ break;
+ case CHRG_CCCV_CV_4350MV:
+ info->cv = CV_4350MV;
+ break;
+ default:
+ info->cv = INT_MAX;
+ break;
+ }
+
+ /* Determine charge current limit */
+ cc = (ret & CHRG_CCCV_CC_MASK) >> CHRG_CCCV_CC_BIT_POS;
+ cc = (cc * CHRG_CCCV_CC_LSB_RES) + CHRG_CCCV_CC_OFFSET;
+ info->cc = cc;
+
+ /* Program default charging voltage and current */
+ cc = min(info->pdata->def_cc, info->max_cc);
+ cv = min(info->pdata->def_cv, info->max_cv);
+
+ ret = axp288_charger_set_cc(info, cc);
+ if (ret < 0)
+ dev_warn(&info->pdev->dev,
+ "error(%d) in setting CC\n", ret);
+
+ ret = axp288_charger_set_cv(info, cv);
+ if (ret < 0)
+ dev_warn(&info->pdev->dev,
+ "error(%d) in setting CV\n", ret);
+ }
+}
+
+static int axp288_charger_probe(struct platform_device *pdev)
+{
+ int ret, i, pirq;
+ struct axp288_chrg_info *info;
+ struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
+ struct power_supply_config charger_cfg = {};
+
+ info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ info->pdev = pdev;
+ info->regmap = axp20x->regmap;
+ info->regmap_irqc = axp20x->regmap_irqc;
+ info->pdata = pdev->dev.platform_data;
+
+ if (!info->pdata) {
+ /* Try ACPI provided pdata via device properties */
+ if (!device_property_present(&pdev->dev,
+ "axp288_charger_data\n"))
+ dev_err(&pdev->dev, "failed to get platform data\n");
+ return -ENODEV;
+ }
+
+ info->cable.edev = extcon_get_extcon_dev(AXP288_EXTCON_DEV_NAME);
+ if (info->cable.edev == NULL) {
+ dev_dbg(&pdev->dev, "%s is not ready, probe deferred\n",
+ AXP288_EXTCON_DEV_NAME);
+ return -EPROBE_DEFER;
+ }
+
+ /* Register for extcon notification */
+ INIT_WORK(&info->cable.work, axp288_charger_extcon_evt_worker);
+ info->cable.nb.notifier_call = axp288_charger_handle_cable_evt;
+ ret = extcon_register_notifier(info->cable.edev, EXTCON_NONE, &info->cable.nb);
+ if (ret) {
+ dev_err(&info->pdev->dev,
+ "failed to register extcon notifier %d\n", ret);
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, info);
+ mutex_init(&info->lock);
+
+ /* Register with power supply class */
+ charger_cfg.drv_data = info;
+ info->psy_usb = power_supply_register(&pdev->dev, &axp288_charger_desc,
+ &charger_cfg);
+ if (IS_ERR(info->psy_usb)) {
+ dev_err(&pdev->dev, "failed to register power supply charger\n");
+ ret = PTR_ERR(info->psy_usb);
+ goto psy_reg_failed;
+ }
+
+ /* Register for OTG notification */
+ INIT_WORK(&info->otg.work, axp288_charger_otg_evt_worker);
+ info->otg.id_nb.notifier_call = axp288_charger_handle_otg_evt;
+ ret = extcon_register_interest(&info->otg.cable, NULL, "USB-Host",
+ &info->otg.id_nb);
+ if (ret)
+ dev_warn(&pdev->dev, "failed to register otg notifier\n");
+
+ if (info->otg.cable.edev)
+ info->otg.id_short = extcon_get_cable_state(
+ info->otg.cable.edev, "USB-Host");
+
+ /* Register charger interrupts */
+ for (i = 0; i < CHRG_INTR_END; i++) {
+ pirq = platform_get_irq(info->pdev, i);
+ info->irq[i] = regmap_irq_get_virq(info->regmap_irqc, pirq);
+ if (info->irq[i] < 0) {
+ dev_warn(&info->pdev->dev,
+ "failed to get virtual interrupt=%d\n", pirq);
+ ret = info->irq[i];
+ goto intr_reg_failed;
+ }
+ ret = devm_request_threaded_irq(&info->pdev->dev, info->irq[i],
+ NULL, axp288_charger_irq_thread_handler,
+ IRQF_ONESHOT, info->pdev->name, info);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to request interrupt=%d\n",
+ info->irq[i]);
+ goto intr_reg_failed;
+ }
+ }
+
+ charger_init_hw_regs(info);
+
+ return 0;
+
+intr_reg_failed:
+ if (info->otg.cable.edev)
+ extcon_unregister_interest(&info->otg.cable);
+ power_supply_unregister(info->psy_usb);
+psy_reg_failed:
+ extcon_unregister_notifier(info->cable.edev, EXTCON_NONE, &info->cable.nb);
+ return ret;
+}
+
+static int axp288_charger_remove(struct platform_device *pdev)
+{
+ struct axp288_chrg_info *info = dev_get_drvdata(&pdev->dev);
+
+ if (info->otg.cable.edev)
+ extcon_unregister_interest(&info->otg.cable);
+
+ extcon_unregister_notifier(info->cable.edev, EXTCON_NONE, &info->cable.nb);
+ power_supply_unregister(info->psy_usb);
+
+ return 0;
+}
+
+static struct platform_driver axp288_charger_driver = {
+ .probe = axp288_charger_probe,
+ .remove = axp288_charger_remove,
+ .driver = {
+ .name = "axp288_charger",
+ },
+};
+
+module_platform_driver(axp288_charger_driver);
+
+MODULE_AUTHOR("Ramakrishna Pallala <ramakrishna.pallala@intel.com>");
+MODULE_DESCRIPTION("X-power AXP288 Charger Driver");
+MODULE_LICENSE("GPL v2");
Code Review / kvmfornfv.git / blobdiff