Say Y to include support for SBS battery driver for SBS-compliant
gas gauges.
-config BATTERY_BQ27x00
- tristate "BQ27x00 battery driver"
- depends on I2C || I2C=n
+config BATTERY_BQ27XXX
+ tristate "BQ27xxx battery driver"
help
- Say Y here to enable support for batteries with BQ27x00 (I2C/HDQ) chips.
+ Say Y here to enable support for batteries with BQ27xxx (I2C/HDQ) chips.
-config BATTERY_BQ27X00_I2C
- bool "BQ27200/BQ27500 support"
- depends on BATTERY_BQ27x00
+config BATTERY_BQ27XXX_I2C
+ bool "BQ27xxx I2C support"
+ depends on BATTERY_BQ27XXX
depends on I2C
default y
help
- Say Y here to enable support for batteries with BQ27x00 (I2C) chips.
+ Say Y here to enable support for batteries with BQ27xxx (I2C) chips.
-config BATTERY_BQ27X00_PLATFORM
- bool "BQ27000 support"
- depends on BATTERY_BQ27x00
+config BATTERY_BQ27XXX_PLATFORM
+ bool "BQ27xxx HDQ support"
+ depends on BATTERY_BQ27XXX
default y
help
- Say Y here to enable support for batteries with BQ27000 (HDQ) chips.
+ Say Y here to enable support for batteries with BQ27xxx (HDQ) chips.
config BATTERY_DA9030
tristate "DA9030 battery driver"
This driver can also be built as a module. If so, the module will be
called da9150-charger.
+config BATTERY_DA9150
+ tristate "Dialog Semiconductor DA9150 Fuel Gauge support"
+ depends on MFD_DA9150
+ help
+ Say Y here to enable support for the Fuel-Gauge unit of the DA9150
+ Integrated Charger & Fuel-Gauge IC
+
+ This driver can also be built as a module. If so, the module will be
+ called da9150-fg.
+
+config AXP288_CHARGER
+ tristate "X-Powers AXP288 Charger"
+ depends on MFD_AXP20X && EXTCON_AXP288
+ help
+ Say yes here to have support X-Power AXP288 power management IC (PMIC)
+ integrated charger.
+
config AXP288_FUEL_GAUGE
tristate "X-Powers AXP288 Fuel Gauge"
depends on MFD_AXP20X && IIO
config CHARGER_TWL4030
tristate "OMAP TWL4030 BCI charger driver"
- depends on TWL4030_CORE
+ depends on IIO && TWL4030_CORE
help
Say Y here to enable support for TWL4030 Battery Charge Interface.
config CHARGER_GPIO
tristate "GPIO charger"
- depends on GPIOLIB
+ depends on GPIOLIB || COMPILE_TEST
help
Say Y to include support for chargers which report their online status
through a GPIO pin.
Say Y to enable support for the battery charger control sysfs and
platform data of MAX8998/LP3974 PMICs.
+config CHARGER_QCOM_SMBB
+ tristate "Qualcomm Switch-Mode Battery Charger and Boost"
+ depends on MFD_SPMI_PMIC || COMPILE_TEST
+ depends on OF
+ help
+ Say Y to include support for the Switch-Mode Battery Charger and
+ Boost (SMBB) hardware found in Qualcomm PM8941 PMICs. The charger
+ is an integrated, single-cell lithium-ion battery charger. DT
+ configuration is required for loading, see the devicetree
+ documentation for more detail. The base name for this driver is
+ 'pm8941_charger'.
+
config CHARGER_BQ2415X
tristate "TI BQ2415x battery charger driver"
depends on I2C
config CHARGER_BQ24190
tristate "TI BQ24190 battery charger driver"
- depends on I2C && GPIOLIB
+ depends on I2C
+ depends on GPIOLIB || COMPILE_TEST
help
Say Y to enable support for the TI BQ24190 battery charger.
+config CHARGER_BQ24257
+ tristate "TI BQ24250/24251/24257 battery charger driver"
+ depends on I2C
+ depends on GPIOLIB || COMPILE_TEST
+ depends on REGMAP_I2C
+ help
+ Say Y to enable support for the TI BQ24250, BQ24251, and BQ24257 battery
+ chargers.
+
config CHARGER_BQ24735
tristate "TI BQ24735 battery charger support"
- depends on I2C && GPIOLIB
+ depends on I2C
+ depends on GPIOLIB || COMPILE_TEST
help
Say Y to enable support for the TI BQ24735 battery charger.
+config CHARGER_BQ25890
+ tristate "TI BQ25890 battery charger driver"
+ depends on I2C
+ depends on GPIOLIB || COMPILE_TEST
+ select REGMAP_I2C
+ help
+ Say Y to enable support for the TI BQ25890 battery charger.
+
config CHARGER_SMB347
tristate "Summit Microelectronics SMB347 Battery Charger"
depends on I2C
Say Y here to enable support for battery charging with TPS65090
PMIC chips.
+config CHARGER_TPS65217
+ tristate "TPS65217 battery charger driver"
+ depends on MFD_TPS65217
+ help
+ Say Y here to enable support for battery charging with TPS65217
+ PMIC chips.
+
config BATTERY_GAUGE_LTC2941
tristate "LTC2941/LTC2943 Battery Gauge Driver"
depends on I2C
The fuelgauge calculates and determines the battery state of charge
according to battery open circuit voltage.
+config CHARGER_RT9455
+ tristate "Richtek RT9455 battery charger driver"
+ depends on I2C
+ depends on GPIOLIB || COMPILE_TEST
+ select REGMAP_I2C
+ help
+ Say Y to enable support for Richtek RT9455 battery charger.
+
+config AXP20X_POWER
+ tristate "AXP20x power supply driver"
+ depends on MFD_AXP20X
+ help
+ This driver provides support for the power supply features of
+ AXP20x PMIC.
+
source "drivers/power/reset/Kconfig"
endif # POWER_SUPPLY
Code Review / kvmfornfv.git / blobdiff