Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / drivers / phy / phy-stih41x-usb.c

diff --git a/kernel/drivers/phy/phy-stih41x-usb.c b/kernel/drivers/phy/phy-stih41x-usb.c
new file mode 100644 (file)
index 0000000..c093b47
--- /dev/null
+++ b/kernel/drivers/phy/phy-stih41x-usb.c
@@ -0,0 +1,188 @@
+/*
+ * Copyright (C) 2014 STMicroelectronics
+ *
+ * STMicroelectronics PHY driver for STiH41x USB.
+ *
+ * Author: Maxime Coquelin <maxime.coquelin@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/clk.h>
+#include <linux/phy/phy.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+
+#define SYSCFG332  0x80
+#define SYSCFG2520 0x820
+
+/**
+ * struct stih41x_usb_cfg - SoC specific PHY register mapping
+ * @syscfg: Offset in syscfg registers bank
+ * @cfg_mask: Bits mask for PHY configuration
+ * @cfg: Static configuration value for PHY
+ * @oscok: Notify the PHY oscillator clock is ready
+ *        Setting this bit enable the PHY
+ */
+struct stih41x_usb_cfg {
+       u32 syscfg;
+       u32 cfg_mask;
+       u32 cfg;
+       u32 oscok;
+};
+
+/**
+ * struct stih41x_usb_phy - Private data for the PHY
+ * @dev: device for this controller
+ * @regmap: Syscfg registers bank in which PHY is configured
+ * @cfg: SoC specific PHY register mapping
+ * @clk: Oscillator used by the PHY
+ */
+struct stih41x_usb_phy {
+       struct device *dev;
+       struct regmap *regmap;
+       const struct stih41x_usb_cfg *cfg;
+       struct clk *clk;
+};
+
+static struct stih41x_usb_cfg stih415_usb_phy_cfg = {
+       .syscfg = SYSCFG332,
+       .cfg_mask = 0x3f,
+       .cfg = 0x38,
+       .oscok = BIT(6),
+};
+
+static struct stih41x_usb_cfg stih416_usb_phy_cfg = {
+       .syscfg = SYSCFG2520,
+       .cfg_mask = 0x33f,
+       .cfg = 0x238,
+       .oscok = BIT(6),
+};
+
+static int stih41x_usb_phy_init(struct phy *phy)
+{
+       struct stih41x_usb_phy *phy_dev = phy_get_drvdata(phy);
+
+       return regmap_update_bits(phy_dev->regmap, phy_dev->cfg->syscfg,
+                          phy_dev->cfg->cfg_mask, phy_dev->cfg->cfg);
+}
+
+static int stih41x_usb_phy_power_on(struct phy *phy)
+{
+       struct stih41x_usb_phy *phy_dev = phy_get_drvdata(phy);
+       int ret;
+
+       ret = clk_prepare_enable(phy_dev->clk);
+       if (ret) {
+               dev_err(phy_dev->dev, "Failed to enable osc_phy clock\n");
+               return ret;
+       }
+
+       ret = regmap_update_bits(phy_dev->regmap, phy_dev->cfg->syscfg,
+                                phy_dev->cfg->oscok, phy_dev->cfg->oscok);
+       if (ret)
+               clk_disable_unprepare(phy_dev->clk);
+
+       return ret;
+}
+
+static int stih41x_usb_phy_power_off(struct phy *phy)
+{
+       struct stih41x_usb_phy *phy_dev = phy_get_drvdata(phy);
+       int ret;
+
+       ret = regmap_update_bits(phy_dev->regmap, phy_dev->cfg->syscfg,
+                       phy_dev->cfg->oscok, 0);
+       if (ret) {
+               dev_err(phy_dev->dev, "Failed to clear oscok bit\n");
+               return ret;
+       }
+
+       clk_disable_unprepare(phy_dev->clk);
+
+       return 0;
+}
+
+static struct phy_ops stih41x_usb_phy_ops = {
+       .init           = stih41x_usb_phy_init,
+       .power_on       = stih41x_usb_phy_power_on,
+       .power_off      = stih41x_usb_phy_power_off,
+       .owner          = THIS_MODULE,
+};
+
+static const struct of_device_id stih41x_usb_phy_of_match[];
+
+static int stih41x_usb_phy_probe(struct platform_device *pdev)
+{
+       struct device_node *np = pdev->dev.of_node;
+       const struct of_device_id *match;
+       struct stih41x_usb_phy *phy_dev;
+       struct device *dev = &pdev->dev;
+       struct phy_provider *phy_provider;
+       struct phy *phy;
+
+       phy_dev = devm_kzalloc(dev, sizeof(*phy_dev), GFP_KERNEL);
+       if (!phy_dev)
+               return -ENOMEM;
+
+       match = of_match_device(stih41x_usb_phy_of_match, &pdev->dev);
+       if (!match)
+               return -ENODEV;
+
+       phy_dev->cfg = match->data;
+
+       phy_dev->regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg");
+       if (IS_ERR(phy_dev->regmap)) {
+               dev_err(dev, "No syscfg phandle specified\n");
+               return PTR_ERR(phy_dev->regmap);
+       }
+
+       phy_dev->clk = devm_clk_get(dev, "osc_phy");
+       if (IS_ERR(phy_dev->clk)) {
+               dev_err(dev, "osc_phy clk not found\n");
+               return PTR_ERR(phy_dev->clk);
+       }
+
+       phy = devm_phy_create(dev, NULL, &stih41x_usb_phy_ops);
+
+       if (IS_ERR(phy)) {
+               dev_err(dev, "failed to create phy\n");
+               return PTR_ERR(phy);
+       }
+
+       phy_dev->dev = dev;
+
+       phy_set_drvdata(phy, phy_dev);
+
+       phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+       return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id stih41x_usb_phy_of_match[] = {
+       { .compatible = "st,stih415-usb-phy", .data = &stih415_usb_phy_cfg },
+       { .compatible = "st,stih416-usb-phy", .data = &stih416_usb_phy_cfg },
+       { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, stih41x_usb_phy_of_match);
+
+static struct platform_driver stih41x_usb_phy_driver = {
+       .probe  = stih41x_usb_phy_probe,
+       .driver = {
+               .name   = "stih41x-usb-phy",
+               .of_match_table = stih41x_usb_phy_of_match,
+       }
+};
+module_platform_driver(stih41x_usb_phy_driver);
+
+MODULE_AUTHOR("Maxime Coquelin <maxime.coquelin@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics USB PHY driver for STiH41x series");
+MODULE_LICENSE("GPL v2");