Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / drivers / pci / hotplug / Kconfig

diff --git a/kernel/drivers/pci/hotplug/Kconfig b/kernel/drivers/pci/hotplug/Kconfig
new file mode 100644 (file)
index 0000000..df8caec
--- /dev/null
+++ b/kernel/drivers/pci/hotplug/Kconfig
@@ -0,0 +1,159 @@
+#
+# PCI Hotplug support
+#
+
+menuconfig HOTPLUG_PCI
+       bool "Support for PCI Hotplug"
+       depends on PCI && SYSFS
+       ---help---
+         Say Y here if you have a motherboard with a PCI Hotplug controller.
+         This allows you to add and remove PCI cards while the machine is
+         powered up and running.
+
+         When in doubt, say N.
+
+if HOTPLUG_PCI
+
+config HOTPLUG_PCI_COMPAQ
+       tristate "Compaq PCI Hotplug driver"
+       depends on X86 && PCI_BIOS
+       help
+         Say Y here if you have a motherboard with a Compaq PCI Hotplug
+         controller.
+
+         To compile this driver as a module, choose M here: the
+         module will be called cpqphp.
+
+         When in doubt, say N.
+
+config HOTPLUG_PCI_COMPAQ_NVRAM
+       bool "Save configuration into NVRAM on Compaq servers"
+       depends on HOTPLUG_PCI_COMPAQ
+       help
+         Say Y here if you have a Compaq server that has a PCI Hotplug
+         controller.  This will allow the PCI Hotplug driver to store the PCI
+         system configuration options in NVRAM.
+
+         When in doubt, say N.
+
+config HOTPLUG_PCI_IBM
+       tristate "IBM PCI Hotplug driver"
+       depends on X86_IO_APIC && X86 && PCI_BIOS
+       help
+         Say Y here if you have a motherboard with a IBM PCI Hotplug
+         controller.
+
+         To compile this driver as a module, choose M here: the
+         module will be called ibmphp.
+
+         When in doubt, say N.
+
+config HOTPLUG_PCI_ACPI
+       bool "ACPI PCI Hotplug driver"
+       depends on HOTPLUG_PCI=y && ((!ACPI_DOCK && ACPI) || (ACPI_DOCK))
+       help
+         Say Y here if you have a system that supports PCI Hotplug using
+         ACPI.
+
+         When in doubt, say N.
+
+config HOTPLUG_PCI_ACPI_IBM
+       tristate "ACPI PCI Hotplug driver IBM extensions"
+       depends on HOTPLUG_PCI_ACPI
+       help
+         Say Y here if you have an IBM system that supports PCI Hotplug using
+         ACPI.
+
+         To compile this driver as a module, choose M here: the
+         module will be called acpiphp_ibm.
+
+         When in doubt, say N.
+
+config HOTPLUG_PCI_CPCI
+       bool "CompactPCI Hotplug driver"
+       help
+         Say Y here if you have a CompactPCI system card with CompactPCI
+         hotswap support per the PICMG 2.1 specification.
+
+         When in doubt, say N.
+
+config HOTPLUG_PCI_CPCI_ZT5550
+       tristate "Ziatech ZT5550 CompactPCI Hotplug driver"
+       depends on HOTPLUG_PCI_CPCI && X86
+       help
+         Say Y here if you have an Performance Technologies (formerly Intel,
+          formerly just Ziatech) Ziatech ZT5550 CompactPCI system card.
+
+         To compile this driver as a module, choose M here: the
+         module will be called cpcihp_zt5550.
+
+         When in doubt, say N.
+
+config HOTPLUG_PCI_CPCI_GENERIC
+       tristate "Generic port I/O CompactPCI Hotplug driver"
+       depends on HOTPLUG_PCI_CPCI && X86
+       help
+         Say Y here if you have a CompactPCI system card that exposes the #ENUM
+         hotswap signal as a bit in a system register that can be read through
+         standard port I/O.
+
+         To compile this driver as a module, choose M here: the
+         module will be called cpcihp_generic.
+
+         When in doubt, say N.
+
+config HOTPLUG_PCI_SHPC
+       tristate "SHPC PCI Hotplug driver"
+       help
+         Say Y here if you have a motherboard with a SHPC PCI Hotplug
+         controller.
+
+         To compile this driver as a module, choose M here: the
+         module will be called shpchp.
+
+         When in doubt, say N.
+
+config HOTPLUG_PCI_RPA
+       tristate "RPA PCI Hotplug driver"
+       depends on PPC_PSERIES && EEH
+       help
+         Say Y here if you have a RPA system that supports PCI Hotplug.
+
+         To compile this driver as a module, choose M here: the
+         module will be called rpaphp.
+
+         When in doubt, say N.
+
+config HOTPLUG_PCI_RPA_DLPAR
+       tristate "RPA Dynamic Logical Partitioning for I/O slots"
+       depends on HOTPLUG_PCI_RPA
+       help
+         Say Y here if your system supports Dynamic Logical Partitioning
+         for I/O slots.
+
+         To compile this driver as a module, choose M here: the
+         module will be called rpadlpar_io.
+
+         When in doubt, say N.
+
+config HOTPLUG_PCI_SGI
+       tristate "SGI PCI Hotplug Support"
+       depends on IA64_SGI_SN2 || IA64_GENERIC
+       help
+         Say Y here if you want to use the SGI Altix Hotplug
+         Driver for PCI devices.
+
+         When in doubt, say N.
+
+config HOTPLUG_PCI_S390
+       bool "System z PCI Hotplug Support"
+       depends on S390 && 64BIT
+       help
+         Say Y here if you want to use the System z PCI Hotplug
+         driver for PCI devices. Without this driver it is not
+         possible to access stand-by PCI functions nor to deconfigure
+         PCI functions.
+
+         When in doubt, say Y.
+
+endif # HOTPLUG_PCI