--- /dev/null
+/* Low-level parallel port routines for built-in port on SGI IP32
+ *
+ * Author: Arnaud Giersch <arnaud.giersch@free.fr>
+ *
+ * Based on parport_pc.c by
+ * Phil Blundell, Tim Waugh, Jose Renau, David Campbell,
+ * Andrea Arcangeli, et al.
+ *
+ * Thanks to Ilya A. Volynets-Evenbakh for his help.
+ *
+ * Copyright (C) 2005, 2006 Arnaud Giersch.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/* Current status:
+ *
+ * Basic SPP and PS2 modes are supported.
+ * Support for parallel port IRQ is present.
+ * Hardware SPP (a.k.a. compatibility), EPP, and ECP modes are
+ * supported.
+ * SPP/ECP FIFO can be driven in PIO or DMA mode. PIO mode can work with
+ * or without interrupt support.
+ *
+ * Hardware ECP mode is not fully implemented (ecp_read_data and
+ * ecp_write_addr are actually missing).
+ *
+ * To do:
+ *
+ * Fully implement ECP mode.
+ * EPP and ECP mode need to be tested. I currently do not own any
+ * peripheral supporting these extended mode, and cannot test them.
+ * If DMA mode works well, decide if support for PIO FIFO modes should be
+ * dropped.
+ * Use the io{read,write} family functions when they become available in
+ * the linux-mips.org tree. Note: the MIPS specific functions readsb()
+ * and writesb() are to be translated by ioread8_rep() and iowrite8_rep()
+ * respectively.
+ */
+
+/* The built-in parallel port on the SGI 02 workstation (a.k.a. IP32) is an
+ * IEEE 1284 parallel port driven by a Texas Instrument TL16PIR552PH chip[1].
+ * This chip supports SPP, bidirectional, EPP and ECP modes. It has a 16 byte
+ * FIFO buffer and supports DMA transfers.
+ *
+ * [1] http://focus.ti.com/docs/prod/folders/print/tl16pir552.html
+ *
+ * Theoretically, we could simply use the parport_pc module. It is however
+ * not so simple. The parport_pc code assumes that the parallel port
+ * registers are port-mapped. On the O2, they are memory-mapped.
+ * Furthermore, each register is replicated on 256 consecutive addresses (as
+ * it is for the built-in serial ports on the same chip).
+ */
+
+/*--- Some configuration defines ---------------------------------------*/
+
+/* DEBUG_PARPORT_IP32
+ * 0 disable debug
+ * 1 standard level: pr_debug1 is enabled
+ * 2 parport_ip32_dump_state is enabled
+ * >=3 verbose level: pr_debug is enabled
+ */
+#if !defined(DEBUG_PARPORT_IP32)
+# define DEBUG_PARPORT_IP32 0 /* 0 (disabled) for production */
+#endif
+
+/*----------------------------------------------------------------------*/
+
+/* Setup DEBUG macros. This is done before any includes, just in case we
+ * activate pr_debug() with DEBUG_PARPORT_IP32 >= 3.
+ */
+#if DEBUG_PARPORT_IP32 == 1
+# warning DEBUG_PARPORT_IP32 == 1
+#elif DEBUG_PARPORT_IP32 == 2
+# warning DEBUG_PARPORT_IP32 == 2
+#elif DEBUG_PARPORT_IP32 >= 3
+# warning DEBUG_PARPORT_IP32 >= 3
+# if !defined(DEBUG)
+# define DEBUG /* enable pr_debug() in kernel.h */
+# endif
+#endif
+
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/parport.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/stddef.h>
+#include <linux/types.h>
+#include <asm/io.h>
+#include <asm/ip32/ip32_ints.h>
+#include <asm/ip32/mace.h>
+
+/*--- Global variables -------------------------------------------------*/
+
+/* Verbose probing on by default for debugging. */
+#if DEBUG_PARPORT_IP32 >= 1
+# define DEFAULT_VERBOSE_PROBING 1
+#else
+# define DEFAULT_VERBOSE_PROBING 0
+#endif
+
+/* Default prefix for printk */
+#define PPIP32 "parport_ip32: "
+
+/*
+ * These are the module parameters:
+ * @features: bit mask of features to enable/disable
+ * (all enabled by default)
+ * @verbose_probing: log chit-chat during initialization
+ */
+#define PARPORT_IP32_ENABLE_IRQ (1U << 0)
+#define PARPORT_IP32_ENABLE_DMA (1U << 1)
+#define PARPORT_IP32_ENABLE_SPP (1U << 2)
+#define PARPORT_IP32_ENABLE_EPP (1U << 3)
+#define PARPORT_IP32_ENABLE_ECP (1U << 4)
+static unsigned int features = ~0U;
+static bool verbose_probing = DEFAULT_VERBOSE_PROBING;
+
+/* We do not support more than one port. */
+static struct parport *this_port = NULL;
+
+/* Timing constants for FIFO modes. */
+#define FIFO_NFAULT_TIMEOUT 100 /* milliseconds */
+#define FIFO_POLLING_INTERVAL 50 /* microseconds */
+
+/*--- I/O register definitions -----------------------------------------*/
+
+/**
+ * struct parport_ip32_regs - virtual addresses of parallel port registers
+ * @data: Data Register
+ * @dsr: Device Status Register
+ * @dcr: Device Control Register
+ * @eppAddr: EPP Address Register
+ * @eppData0: EPP Data Register 0
+ * @eppData1: EPP Data Register 1
+ * @eppData2: EPP Data Register 2
+ * @eppData3: EPP Data Register 3
+ * @ecpAFifo: ECP Address FIFO
+ * @fifo: General FIFO register. The same address is used for:
+ * - cFifo, the Parallel Port DATA FIFO
+ * - ecpDFifo, the ECP Data FIFO
+ * - tFifo, the ECP Test FIFO
+ * @cnfgA: Configuration Register A
+ * @cnfgB: Configuration Register B
+ * @ecr: Extended Control Register
+ */
+struct parport_ip32_regs {
+ void __iomem *data;
+ void __iomem *dsr;
+ void __iomem *dcr;
+ void __iomem *eppAddr;
+ void __iomem *eppData0;
+ void __iomem *eppData1;
+ void __iomem *eppData2;
+ void __iomem *eppData3;
+ void __iomem *ecpAFifo;
+ void __iomem *fifo;
+ void __iomem *cnfgA;
+ void __iomem *cnfgB;
+ void __iomem *ecr;
+};
+
+/* Device Status Register */
+#define DSR_nBUSY (1U << 7) /* PARPORT_STATUS_BUSY */
+#define DSR_nACK (1U << 6) /* PARPORT_STATUS_ACK */
+#define DSR_PERROR (1U << 5) /* PARPORT_STATUS_PAPEROUT */
+#define DSR_SELECT (1U << 4) /* PARPORT_STATUS_SELECT */
+#define DSR_nFAULT (1U << 3) /* PARPORT_STATUS_ERROR */
+#define DSR_nPRINT (1U << 2) /* specific to TL16PIR552 */
+/* #define DSR_reserved (1U << 1) */
+#define DSR_TIMEOUT (1U << 0) /* EPP timeout */
+
+/* Device Control Register */
+/* #define DCR_reserved (1U << 7) | (1U << 6) */
+#define DCR_DIR (1U << 5) /* direction */
+#define DCR_IRQ (1U << 4) /* interrupt on nAck */
+#define DCR_SELECT (1U << 3) /* PARPORT_CONTROL_SELECT */
+#define DCR_nINIT (1U << 2) /* PARPORT_CONTROL_INIT */
+#define DCR_AUTOFD (1U << 1) /* PARPORT_CONTROL_AUTOFD */
+#define DCR_STROBE (1U << 0) /* PARPORT_CONTROL_STROBE */
+
+/* ECP Configuration Register A */
+#define CNFGA_IRQ (1U << 7)
+#define CNFGA_ID_MASK ((1U << 6) | (1U << 5) | (1U << 4))
+#define CNFGA_ID_SHIFT 4
+#define CNFGA_ID_16 (00U << CNFGA_ID_SHIFT)
+#define CNFGA_ID_8 (01U << CNFGA_ID_SHIFT)
+#define CNFGA_ID_32 (02U << CNFGA_ID_SHIFT)
+/* #define CNFGA_reserved (1U << 3) */
+#define CNFGA_nBYTEINTRANS (1U << 2)
+#define CNFGA_PWORDLEFT ((1U << 1) | (1U << 0))
+
+/* ECP Configuration Register B */
+#define CNFGB_COMPRESS (1U << 7)
+#define CNFGB_INTRVAL (1U << 6)
+#define CNFGB_IRQ_MASK ((1U << 5) | (1U << 4) | (1U << 3))
+#define CNFGB_IRQ_SHIFT 3
+#define CNFGB_DMA_MASK ((1U << 2) | (1U << 1) | (1U << 0))
+#define CNFGB_DMA_SHIFT 0
+
+/* Extended Control Register */
+#define ECR_MODE_MASK ((1U << 7) | (1U << 6) | (1U << 5))
+#define ECR_MODE_SHIFT 5
+#define ECR_MODE_SPP (00U << ECR_MODE_SHIFT)
+#define ECR_MODE_PS2 (01U << ECR_MODE_SHIFT)
+#define ECR_MODE_PPF (02U << ECR_MODE_SHIFT)
+#define ECR_MODE_ECP (03U << ECR_MODE_SHIFT)
+#define ECR_MODE_EPP (04U << ECR_MODE_SHIFT)
+/* #define ECR_MODE_reserved (05U << ECR_MODE_SHIFT) */
+#define ECR_MODE_TST (06U << ECR_MODE_SHIFT)
+#define ECR_MODE_CFG (07U << ECR_MODE_SHIFT)
+#define ECR_nERRINTR (1U << 4)
+#define ECR_DMAEN (1U << 3)
+#define ECR_SERVINTR (1U << 2)
+#define ECR_F_FULL (1U << 1)
+#define ECR_F_EMPTY (1U << 0)
+
+/*--- Private data -----------------------------------------------------*/
+
+/**
+ * enum parport_ip32_irq_mode - operation mode of interrupt handler
+ * @PARPORT_IP32_IRQ_FWD: forward interrupt to the upper parport layer
+ * @PARPORT_IP32_IRQ_HERE: interrupt is handled locally
+ */
+enum parport_ip32_irq_mode { PARPORT_IP32_IRQ_FWD, PARPORT_IP32_IRQ_HERE };
+
+/**
+ * struct parport_ip32_private - private stuff for &struct parport
+ * @regs: register addresses
+ * @dcr_cache: cached contents of DCR
+ * @dcr_writable: bit mask of writable DCR bits
+ * @pword: number of bytes per PWord
+ * @fifo_depth: number of PWords that FIFO will hold
+ * @readIntrThreshold: minimum number of PWords we can read
+ * if we get an interrupt
+ * @writeIntrThreshold: minimum number of PWords we can write
+ * if we get an interrupt
+ * @irq_mode: operation mode of interrupt handler for this port
+ * @irq_complete: mutex used to wait for an interrupt to occur
+ */
+struct parport_ip32_private {
+ struct parport_ip32_regs regs;
+ unsigned int dcr_cache;
+ unsigned int dcr_writable;
+ unsigned int pword;
+ unsigned int fifo_depth;
+ unsigned int readIntrThreshold;
+ unsigned int writeIntrThreshold;
+ enum parport_ip32_irq_mode irq_mode;
+ struct completion irq_complete;
+};
+
+/*--- Debug code -------------------------------------------------------*/
+
+/*
+ * pr_debug1 - print debug messages
+ *
+ * This is like pr_debug(), but is defined for %DEBUG_PARPORT_IP32 >= 1
+ */
+#if DEBUG_PARPORT_IP32 >= 1
+# define pr_debug1(...) printk(KERN_DEBUG __VA_ARGS__)
+#else /* DEBUG_PARPORT_IP32 < 1 */
+# define pr_debug1(...) do { } while (0)
+#endif
+
+/*
+ * pr_trace, pr_trace1 - trace function calls
+ * @p: pointer to &struct parport
+ * @fmt: printk format string
+ * @...: parameters for format string
+ *
+ * Macros used to trace function calls. The given string is formatted after
+ * function name. pr_trace() uses pr_debug(), and pr_trace1() uses
+ * pr_debug1(). __pr_trace() is the low-level macro and is not to be used
+ * directly.
+ */
+#define __pr_trace(pr, p, fmt, ...) \
+ pr("%s: %s" fmt "\n", \
+ ({ const struct parport *__p = (p); \
+ __p ? __p->name : "parport_ip32"; }), \
+ __func__ , ##__VA_ARGS__)
+#define pr_trace(p, fmt, ...) __pr_trace(pr_debug, p, fmt , ##__VA_ARGS__)
+#define pr_trace1(p, fmt, ...) __pr_trace(pr_debug1, p, fmt , ##__VA_ARGS__)
+
+/*
+ * __pr_probe, pr_probe - print message if @verbose_probing is true
+ * @p: pointer to &struct parport
+ * @fmt: printk format string
+ * @...: parameters for format string
+ *
+ * For new lines, use pr_probe(). Use __pr_probe() for continued lines.
+ */
+#define __pr_probe(...) \
+ do { if (verbose_probing) printk(__VA_ARGS__); } while (0)
+#define pr_probe(p, fmt, ...) \
+ __pr_probe(KERN_INFO PPIP32 "0x%lx: " fmt, (p)->base , ##__VA_ARGS__)
+
+/*
+ * parport_ip32_dump_state - print register status of parport
+ * @p: pointer to &struct parport
+ * @str: string to add in message
+ * @show_ecp_config: shall we dump ECP configuration registers too?
+ *
+ * This function is only here for debugging purpose, and should be used with
+ * care. Reading the parallel port registers may have undesired side effects.
+ * Especially if @show_ecp_config is true, the parallel port is resetted.
+ * This function is only defined if %DEBUG_PARPORT_IP32 >= 2.
+ */
+#if DEBUG_PARPORT_IP32 >= 2
+static void parport_ip32_dump_state(struct parport *p, char *str,
+ unsigned int show_ecp_config)
+{
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ unsigned int i;
+
+ printk(KERN_DEBUG PPIP32 "%s: state (%s):\n", p->name, str);
+ {
+ static const char ecr_modes[8][4] = {"SPP", "PS2", "PPF",
+ "ECP", "EPP", "???",
+ "TST", "CFG"};
+ unsigned int ecr = readb(priv->regs.ecr);
+ printk(KERN_DEBUG PPIP32 " ecr=0x%02x", ecr);
+ printk(" %s",
+ ecr_modes[(ecr & ECR_MODE_MASK) >> ECR_MODE_SHIFT]);
+ if (ecr & ECR_nERRINTR)
+ printk(",nErrIntrEn");
+ if (ecr & ECR_DMAEN)
+ printk(",dmaEn");
+ if (ecr & ECR_SERVINTR)
+ printk(",serviceIntr");
+ if (ecr & ECR_F_FULL)
+ printk(",f_full");
+ if (ecr & ECR_F_EMPTY)
+ printk(",f_empty");
+ printk("\n");
+ }
+ if (show_ecp_config) {
+ unsigned int oecr, cnfgA, cnfgB;
+ oecr = readb(priv->regs.ecr);
+ writeb(ECR_MODE_PS2, priv->regs.ecr);
+ writeb(ECR_MODE_CFG, priv->regs.ecr);
+ cnfgA = readb(priv->regs.cnfgA);
+ cnfgB = readb(priv->regs.cnfgB);
+ writeb(ECR_MODE_PS2, priv->regs.ecr);
+ writeb(oecr, priv->regs.ecr);
+ printk(KERN_DEBUG PPIP32 " cnfgA=0x%02x", cnfgA);
+ printk(" ISA-%s", (cnfgA & CNFGA_IRQ) ? "Level" : "Pulses");
+ switch (cnfgA & CNFGA_ID_MASK) {
+ case CNFGA_ID_8:
+ printk(",8 bits");
+ break;
+ case CNFGA_ID_16:
+ printk(",16 bits");
+ break;
+ case CNFGA_ID_32:
+ printk(",32 bits");
+ break;
+ default:
+ printk(",unknown ID");
+ break;
+ }
+ if (!(cnfgA & CNFGA_nBYTEINTRANS))
+ printk(",ByteInTrans");
+ if ((cnfgA & CNFGA_ID_MASK) != CNFGA_ID_8)
+ printk(",%d byte%s left", cnfgA & CNFGA_PWORDLEFT,
+ ((cnfgA & CNFGA_PWORDLEFT) > 1) ? "s" : "");
+ printk("\n");
+ printk(KERN_DEBUG PPIP32 " cnfgB=0x%02x", cnfgB);
+ printk(" irq=%u,dma=%u",
+ (cnfgB & CNFGB_IRQ_MASK) >> CNFGB_IRQ_SHIFT,
+ (cnfgB & CNFGB_DMA_MASK) >> CNFGB_DMA_SHIFT);
+ printk(",intrValue=%d", !!(cnfgB & CNFGB_INTRVAL));
+ if (cnfgB & CNFGB_COMPRESS)
+ printk(",compress");
+ printk("\n");
+ }
+ for (i = 0; i < 2; i++) {
+ unsigned int dcr = i ? priv->dcr_cache : readb(priv->regs.dcr);
+ printk(KERN_DEBUG PPIP32 " dcr(%s)=0x%02x",
+ i ? "soft" : "hard", dcr);
+ printk(" %s", (dcr & DCR_DIR) ? "rev" : "fwd");
+ if (dcr & DCR_IRQ)
+ printk(",ackIntEn");
+ if (!(dcr & DCR_SELECT))
+ printk(",nSelectIn");
+ if (dcr & DCR_nINIT)
+ printk(",nInit");
+ if (!(dcr & DCR_AUTOFD))
+ printk(",nAutoFD");
+ if (!(dcr & DCR_STROBE))
+ printk(",nStrobe");
+ printk("\n");
+ }
+#define sep (f++ ? ',' : ' ')
+ {
+ unsigned int f = 0;
+ unsigned int dsr = readb(priv->regs.dsr);
+ printk(KERN_DEBUG PPIP32 " dsr=0x%02x", dsr);
+ if (!(dsr & DSR_nBUSY))
+ printk("%cBusy", sep);
+ if (dsr & DSR_nACK)
+ printk("%cnAck", sep);
+ if (dsr & DSR_PERROR)
+ printk("%cPError", sep);
+ if (dsr & DSR_SELECT)
+ printk("%cSelect", sep);
+ if (dsr & DSR_nFAULT)
+ printk("%cnFault", sep);
+ if (!(dsr & DSR_nPRINT))
+ printk("%c(Print)", sep);
+ if (dsr & DSR_TIMEOUT)
+ printk("%cTimeout", sep);
+ printk("\n");
+ }
+#undef sep
+}
+#else /* DEBUG_PARPORT_IP32 < 2 */
+#define parport_ip32_dump_state(...) do { } while (0)
+#endif
+
+/*
+ * CHECK_EXTRA_BITS - track and log extra bits
+ * @p: pointer to &struct parport
+ * @b: byte to inspect
+ * @m: bit mask of authorized bits
+ *
+ * This is used to track and log extra bits that should not be there in
+ * parport_ip32_write_control() and parport_ip32_frob_control(). It is only
+ * defined if %DEBUG_PARPORT_IP32 >= 1.
+ */
+#if DEBUG_PARPORT_IP32 >= 1
+#define CHECK_EXTRA_BITS(p, b, m) \
+ do { \
+ unsigned int __b = (b), __m = (m); \
+ if (__b & ~__m) \
+ pr_debug1(PPIP32 "%s: extra bits in %s(%s): " \
+ "0x%02x/0x%02x\n", \
+ (p)->name, __func__, #b, __b, __m); \
+ } while (0)
+#else /* DEBUG_PARPORT_IP32 < 1 */
+#define CHECK_EXTRA_BITS(...) do { } while (0)
+#endif
+
+/*--- IP32 parallel port DMA operations --------------------------------*/
+
+/**
+ * struct parport_ip32_dma_data - private data needed for DMA operation
+ * @dir: DMA direction (from or to device)
+ * @buf: buffer physical address
+ * @len: buffer length
+ * @next: address of next bytes to DMA transfer
+ * @left: number of bytes remaining
+ * @ctx: next context to write (0: context_a; 1: context_b)
+ * @irq_on: are the DMA IRQs currently enabled?
+ * @lock: spinlock to protect access to the structure
+ */
+struct parport_ip32_dma_data {
+ enum dma_data_direction dir;
+ dma_addr_t buf;
+ dma_addr_t next;
+ size_t len;
+ size_t left;
+ unsigned int ctx;
+ unsigned int irq_on;
+ spinlock_t lock;
+};
+static struct parport_ip32_dma_data parport_ip32_dma;
+
+/**
+ * parport_ip32_dma_setup_context - setup next DMA context
+ * @limit: maximum data size for the context
+ *
+ * The alignment constraints must be verified in caller function, and the
+ * parameter @limit must be set accordingly.
+ */
+static void parport_ip32_dma_setup_context(unsigned int limit)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&parport_ip32_dma.lock, flags);
+ if (parport_ip32_dma.left > 0) {
+ /* Note: ctxreg is "volatile" here only because
+ * mace->perif.ctrl.parport.context_a and context_b are
+ * "volatile". */
+ volatile u64 __iomem *ctxreg = (parport_ip32_dma.ctx == 0) ?
+ &mace->perif.ctrl.parport.context_a :
+ &mace->perif.ctrl.parport.context_b;
+ u64 count;
+ u64 ctxval;
+ if (parport_ip32_dma.left <= limit) {
+ count = parport_ip32_dma.left;
+ ctxval = MACEPAR_CONTEXT_LASTFLAG;
+ } else {
+ count = limit;
+ ctxval = 0;
+ }
+
+ pr_trace(NULL,
+ "(%u): 0x%04x:0x%04x, %u -> %u%s",
+ limit,
+ (unsigned int)parport_ip32_dma.buf,
+ (unsigned int)parport_ip32_dma.next,
+ (unsigned int)count,
+ parport_ip32_dma.ctx, ctxval ? "*" : "");
+
+ ctxval |= parport_ip32_dma.next &
+ MACEPAR_CONTEXT_BASEADDR_MASK;
+ ctxval |= ((count - 1) << MACEPAR_CONTEXT_DATALEN_SHIFT) &
+ MACEPAR_CONTEXT_DATALEN_MASK;
+ writeq(ctxval, ctxreg);
+ parport_ip32_dma.next += count;
+ parport_ip32_dma.left -= count;
+ parport_ip32_dma.ctx ^= 1U;
+ }
+ /* If there is nothing more to send, disable IRQs to avoid to
+ * face an IRQ storm which can lock the machine. Disable them
+ * only once. */
+ if (parport_ip32_dma.left == 0 && parport_ip32_dma.irq_on) {
+ pr_debug(PPIP32 "IRQ off (ctx)\n");
+ disable_irq_nosync(MACEISA_PAR_CTXA_IRQ);
+ disable_irq_nosync(MACEISA_PAR_CTXB_IRQ);
+ parport_ip32_dma.irq_on = 0;
+ }
+ spin_unlock_irqrestore(&parport_ip32_dma.lock, flags);
+}
+
+/**
+ * parport_ip32_dma_interrupt - DMA interrupt handler
+ * @irq: interrupt number
+ * @dev_id: unused
+ */
+static irqreturn_t parport_ip32_dma_interrupt(int irq, void *dev_id)
+{
+ if (parport_ip32_dma.left)
+ pr_trace(NULL, "(%d): ctx=%d", irq, parport_ip32_dma.ctx);
+ parport_ip32_dma_setup_context(MACEPAR_CONTEXT_DATA_BOUND);
+ return IRQ_HANDLED;
+}
+
+#if DEBUG_PARPORT_IP32
+static irqreturn_t parport_ip32_merr_interrupt(int irq, void *dev_id)
+{
+ pr_trace1(NULL, "(%d)", irq);
+ return IRQ_HANDLED;
+}
+#endif
+
+/**
+ * parport_ip32_dma_start - begins a DMA transfer
+ * @dir: DMA direction: DMA_TO_DEVICE or DMA_FROM_DEVICE
+ * @addr: pointer to data buffer
+ * @count: buffer size
+ *
+ * Calls to parport_ip32_dma_start() and parport_ip32_dma_stop() must be
+ * correctly balanced.
+ */
+static int parport_ip32_dma_start(enum dma_data_direction dir,
+ void *addr, size_t count)
+{
+ unsigned int limit;
+ u64 ctrl;
+
+ pr_trace(NULL, "(%d, %lu)", dir, (unsigned long)count);
+
+ /* FIXME - add support for DMA_FROM_DEVICE. In this case, buffer must
+ * be 64 bytes aligned. */
+ BUG_ON(dir != DMA_TO_DEVICE);
+
+ /* Reset DMA controller */
+ ctrl = MACEPAR_CTLSTAT_RESET;
+ writeq(ctrl, &mace->perif.ctrl.parport.cntlstat);
+
+ /* DMA IRQs should normally be enabled */
+ if (!parport_ip32_dma.irq_on) {
+ WARN_ON(1);
+ enable_irq(MACEISA_PAR_CTXA_IRQ);
+ enable_irq(MACEISA_PAR_CTXB_IRQ);
+ parport_ip32_dma.irq_on = 1;
+ }
+
+ /* Prepare DMA pointers */
+ parport_ip32_dma.dir = dir;
+ parport_ip32_dma.buf = dma_map_single(NULL, addr, count, dir);
+ parport_ip32_dma.len = count;
+ parport_ip32_dma.next = parport_ip32_dma.buf;
+ parport_ip32_dma.left = parport_ip32_dma.len;
+ parport_ip32_dma.ctx = 0;
+
+ /* Setup DMA direction and first two contexts */
+ ctrl = (dir == DMA_TO_DEVICE) ? 0 : MACEPAR_CTLSTAT_DIRECTION;
+ writeq(ctrl, &mace->perif.ctrl.parport.cntlstat);
+ /* Single transfer should not cross a 4K page boundary */
+ limit = MACEPAR_CONTEXT_DATA_BOUND -
+ (parport_ip32_dma.next & (MACEPAR_CONTEXT_DATA_BOUND - 1));
+ parport_ip32_dma_setup_context(limit);
+ parport_ip32_dma_setup_context(MACEPAR_CONTEXT_DATA_BOUND);
+
+ /* Real start of DMA transfer */
+ ctrl |= MACEPAR_CTLSTAT_ENABLE;
+ writeq(ctrl, &mace->perif.ctrl.parport.cntlstat);
+
+ return 0;
+}
+
+/**
+ * parport_ip32_dma_stop - ends a running DMA transfer
+ *
+ * Calls to parport_ip32_dma_start() and parport_ip32_dma_stop() must be
+ * correctly balanced.
+ */
+static void parport_ip32_dma_stop(void)
+{
+ u64 ctx_a;
+ u64 ctx_b;
+ u64 ctrl;
+ u64 diag;
+ size_t res[2]; /* {[0] = res_a, [1] = res_b} */
+
+ pr_trace(NULL, "()");
+
+ /* Disable IRQs */
+ spin_lock_irq(&parport_ip32_dma.lock);
+ if (parport_ip32_dma.irq_on) {
+ pr_debug(PPIP32 "IRQ off (stop)\n");
+ disable_irq_nosync(MACEISA_PAR_CTXA_IRQ);
+ disable_irq_nosync(MACEISA_PAR_CTXB_IRQ);
+ parport_ip32_dma.irq_on = 0;
+ }
+ spin_unlock_irq(&parport_ip32_dma.lock);
+ /* Force IRQ synchronization, even if the IRQs were disabled
+ * elsewhere. */
+ synchronize_irq(MACEISA_PAR_CTXA_IRQ);
+ synchronize_irq(MACEISA_PAR_CTXB_IRQ);
+
+ /* Stop DMA transfer */
+ ctrl = readq(&mace->perif.ctrl.parport.cntlstat);
+ ctrl &= ~MACEPAR_CTLSTAT_ENABLE;
+ writeq(ctrl, &mace->perif.ctrl.parport.cntlstat);
+
+ /* Adjust residue (parport_ip32_dma.left) */
+ ctx_a = readq(&mace->perif.ctrl.parport.context_a);
+ ctx_b = readq(&mace->perif.ctrl.parport.context_b);
+ ctrl = readq(&mace->perif.ctrl.parport.cntlstat);
+ diag = readq(&mace->perif.ctrl.parport.diagnostic);
+ res[0] = (ctrl & MACEPAR_CTLSTAT_CTXA_VALID) ?
+ 1 + ((ctx_a & MACEPAR_CONTEXT_DATALEN_MASK) >>
+ MACEPAR_CONTEXT_DATALEN_SHIFT) :
+ 0;
+ res[1] = (ctrl & MACEPAR_CTLSTAT_CTXB_VALID) ?
+ 1 + ((ctx_b & MACEPAR_CONTEXT_DATALEN_MASK) >>
+ MACEPAR_CONTEXT_DATALEN_SHIFT) :
+ 0;
+ if (diag & MACEPAR_DIAG_DMACTIVE)
+ res[(diag & MACEPAR_DIAG_CTXINUSE) != 0] =
+ 1 + ((diag & MACEPAR_DIAG_CTRMASK) >>
+ MACEPAR_DIAG_CTRSHIFT);
+ parport_ip32_dma.left += res[0] + res[1];
+
+ /* Reset DMA controller, and re-enable IRQs */
+ ctrl = MACEPAR_CTLSTAT_RESET;
+ writeq(ctrl, &mace->perif.ctrl.parport.cntlstat);
+ pr_debug(PPIP32 "IRQ on (stop)\n");
+ enable_irq(MACEISA_PAR_CTXA_IRQ);
+ enable_irq(MACEISA_PAR_CTXB_IRQ);
+ parport_ip32_dma.irq_on = 1;
+
+ dma_unmap_single(NULL, parport_ip32_dma.buf, parport_ip32_dma.len,
+ parport_ip32_dma.dir);
+}
+
+/**
+ * parport_ip32_dma_get_residue - get residue from last DMA transfer
+ *
+ * Returns the number of bytes remaining from last DMA transfer.
+ */
+static inline size_t parport_ip32_dma_get_residue(void)
+{
+ return parport_ip32_dma.left;
+}
+
+/**
+ * parport_ip32_dma_register - initialize DMA engine
+ *
+ * Returns zero for success.
+ */
+static int parport_ip32_dma_register(void)
+{
+ int err;
+
+ spin_lock_init(&parport_ip32_dma.lock);
+ parport_ip32_dma.irq_on = 1;
+
+ /* Reset DMA controller */
+ writeq(MACEPAR_CTLSTAT_RESET, &mace->perif.ctrl.parport.cntlstat);
+
+ /* Request IRQs */
+ err = request_irq(MACEISA_PAR_CTXA_IRQ, parport_ip32_dma_interrupt,
+ 0, "parport_ip32", NULL);
+ if (err)
+ goto fail_a;
+ err = request_irq(MACEISA_PAR_CTXB_IRQ, parport_ip32_dma_interrupt,
+ 0, "parport_ip32", NULL);
+ if (err)
+ goto fail_b;
+#if DEBUG_PARPORT_IP32
+ /* FIXME - what is this IRQ for? */
+ err = request_irq(MACEISA_PAR_MERR_IRQ, parport_ip32_merr_interrupt,
+ 0, "parport_ip32", NULL);
+ if (err)
+ goto fail_merr;
+#endif
+ return 0;
+
+#if DEBUG_PARPORT_IP32
+fail_merr:
+ free_irq(MACEISA_PAR_CTXB_IRQ, NULL);
+#endif
+fail_b:
+ free_irq(MACEISA_PAR_CTXA_IRQ, NULL);
+fail_a:
+ return err;
+}
+
+/**
+ * parport_ip32_dma_unregister - release and free resources for DMA engine
+ */
+static void parport_ip32_dma_unregister(void)
+{
+#if DEBUG_PARPORT_IP32
+ free_irq(MACEISA_PAR_MERR_IRQ, NULL);
+#endif
+ free_irq(MACEISA_PAR_CTXB_IRQ, NULL);
+ free_irq(MACEISA_PAR_CTXA_IRQ, NULL);
+}
+
+/*--- Interrupt handlers and associates --------------------------------*/
+
+/**
+ * parport_ip32_wakeup - wakes up code waiting for an interrupt
+ * @p: pointer to &struct parport
+ */
+static inline void parport_ip32_wakeup(struct parport *p)
+{
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ complete(&priv->irq_complete);
+}
+
+/**
+ * parport_ip32_interrupt - interrupt handler
+ * @irq: interrupt number
+ * @dev_id: pointer to &struct parport
+ *
+ * Caught interrupts are forwarded to the upper parport layer if IRQ_mode is
+ * %PARPORT_IP32_IRQ_FWD.
+ */
+static irqreturn_t parport_ip32_interrupt(int irq, void *dev_id)
+{
+ struct parport * const p = dev_id;
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ enum parport_ip32_irq_mode irq_mode = priv->irq_mode;
+
+ switch (irq_mode) {
+ case PARPORT_IP32_IRQ_FWD:
+ return parport_irq_handler(irq, dev_id);
+
+ case PARPORT_IP32_IRQ_HERE:
+ parport_ip32_wakeup(p);
+ break;
+ }
+
+ return IRQ_HANDLED;
+}
+
+/*--- Some utility function to manipulate ECR register -----------------*/
+
+/**
+ * parport_ip32_read_econtrol - read contents of the ECR register
+ * @p: pointer to &struct parport
+ */
+static inline unsigned int parport_ip32_read_econtrol(struct parport *p)
+{
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ return readb(priv->regs.ecr);
+}
+
+/**
+ * parport_ip32_write_econtrol - write new contents to the ECR register
+ * @p: pointer to &struct parport
+ * @c: new value to write
+ */
+static inline void parport_ip32_write_econtrol(struct parport *p,
+ unsigned int c)
+{
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ writeb(c, priv->regs.ecr);
+}
+
+/**
+ * parport_ip32_frob_econtrol - change bits from the ECR register
+ * @p: pointer to &struct parport
+ * @mask: bit mask of bits to change
+ * @val: new value for changed bits
+ *
+ * Read from the ECR, mask out the bits in @mask, exclusive-or with the bits
+ * in @val, and write the result to the ECR.
+ */
+static inline void parport_ip32_frob_econtrol(struct parport *p,
+ unsigned int mask,
+ unsigned int val)
+{
+ unsigned int c;
+ c = (parport_ip32_read_econtrol(p) & ~mask) ^ val;
+ parport_ip32_write_econtrol(p, c);
+}
+
+/**
+ * parport_ip32_set_mode - change mode of ECP port
+ * @p: pointer to &struct parport
+ * @mode: new mode to write in ECR
+ *
+ * ECR is reset in a sane state (interrupts and DMA disabled), and placed in
+ * mode @mode. Go through PS2 mode if needed.
+ */
+static void parport_ip32_set_mode(struct parport *p, unsigned int mode)
+{
+ unsigned int omode;
+
+ mode &= ECR_MODE_MASK;
+ omode = parport_ip32_read_econtrol(p) & ECR_MODE_MASK;
+
+ if (!(mode == ECR_MODE_SPP || mode == ECR_MODE_PS2
+ || omode == ECR_MODE_SPP || omode == ECR_MODE_PS2)) {
+ /* We have to go through PS2 mode */
+ unsigned int ecr = ECR_MODE_PS2 | ECR_nERRINTR | ECR_SERVINTR;
+ parport_ip32_write_econtrol(p, ecr);
+ }
+ parport_ip32_write_econtrol(p, mode | ECR_nERRINTR | ECR_SERVINTR);
+}
+
+/*--- Basic functions needed for parport -------------------------------*/
+
+/**
+ * parport_ip32_read_data - return current contents of the DATA register
+ * @p: pointer to &struct parport
+ */
+static inline unsigned char parport_ip32_read_data(struct parport *p)
+{
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ return readb(priv->regs.data);
+}
+
+/**
+ * parport_ip32_write_data - set new contents for the DATA register
+ * @p: pointer to &struct parport
+ * @d: new value to write
+ */
+static inline void parport_ip32_write_data(struct parport *p, unsigned char d)
+{
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ writeb(d, priv->regs.data);
+}
+
+/**
+ * parport_ip32_read_status - return current contents of the DSR register
+ * @p: pointer to &struct parport
+ */
+static inline unsigned char parport_ip32_read_status(struct parport *p)
+{
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ return readb(priv->regs.dsr);
+}
+
+/**
+ * __parport_ip32_read_control - return cached contents of the DCR register
+ * @p: pointer to &struct parport
+ */
+static inline unsigned int __parport_ip32_read_control(struct parport *p)
+{
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ return priv->dcr_cache; /* use soft copy */
+}
+
+/**
+ * __parport_ip32_write_control - set new contents for the DCR register
+ * @p: pointer to &struct parport
+ * @c: new value to write
+ */
+static inline void __parport_ip32_write_control(struct parport *p,
+ unsigned int c)
+{
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ CHECK_EXTRA_BITS(p, c, priv->dcr_writable);
+ c &= priv->dcr_writable; /* only writable bits */
+ writeb(c, priv->regs.dcr);
+ priv->dcr_cache = c; /* update soft copy */
+}
+
+/**
+ * __parport_ip32_frob_control - change bits from the DCR register
+ * @p: pointer to &struct parport
+ * @mask: bit mask of bits to change
+ * @val: new value for changed bits
+ *
+ * This is equivalent to read from the DCR, mask out the bits in @mask,
+ * exclusive-or with the bits in @val, and write the result to the DCR.
+ * Actually, the cached contents of the DCR is used.
+ */
+static inline void __parport_ip32_frob_control(struct parport *p,
+ unsigned int mask,
+ unsigned int val)
+{
+ unsigned int c;
+ c = (__parport_ip32_read_control(p) & ~mask) ^ val;
+ __parport_ip32_write_control(p, c);
+}
+
+/**
+ * parport_ip32_read_control - return cached contents of the DCR register
+ * @p: pointer to &struct parport
+ *
+ * The return value is masked so as to only return the value of %DCR_STROBE,
+ * %DCR_AUTOFD, %DCR_nINIT, and %DCR_SELECT.
+ */
+static inline unsigned char parport_ip32_read_control(struct parport *p)
+{
+ const unsigned int rm =
+ DCR_STROBE | DCR_AUTOFD | DCR_nINIT | DCR_SELECT;
+ return __parport_ip32_read_control(p) & rm;
+}
+
+/**
+ * parport_ip32_write_control - set new contents for the DCR register
+ * @p: pointer to &struct parport
+ * @c: new value to write
+ *
+ * The value is masked so as to only change the value of %DCR_STROBE,
+ * %DCR_AUTOFD, %DCR_nINIT, and %DCR_SELECT.
+ */
+static inline void parport_ip32_write_control(struct parport *p,
+ unsigned char c)
+{
+ const unsigned int wm =
+ DCR_STROBE | DCR_AUTOFD | DCR_nINIT | DCR_SELECT;
+ CHECK_EXTRA_BITS(p, c, wm);
+ __parport_ip32_frob_control(p, wm, c & wm);
+}
+
+/**
+ * parport_ip32_frob_control - change bits from the DCR register
+ * @p: pointer to &struct parport
+ * @mask: bit mask of bits to change
+ * @val: new value for changed bits
+ *
+ * This differs from __parport_ip32_frob_control() in that it only allows to
+ * change the value of %DCR_STROBE, %DCR_AUTOFD, %DCR_nINIT, and %DCR_SELECT.
+ */
+static inline unsigned char parport_ip32_frob_control(struct parport *p,
+ unsigned char mask,
+ unsigned char val)
+{
+ const unsigned int wm =
+ DCR_STROBE | DCR_AUTOFD | DCR_nINIT | DCR_SELECT;
+ CHECK_EXTRA_BITS(p, mask, wm);
+ CHECK_EXTRA_BITS(p, val, wm);
+ __parport_ip32_frob_control(p, mask & wm, val & wm);
+ return parport_ip32_read_control(p);
+}
+
+/**
+ * parport_ip32_disable_irq - disable interrupts on the rising edge of nACK
+ * @p: pointer to &struct parport
+ */
+static inline void parport_ip32_disable_irq(struct parport *p)
+{
+ __parport_ip32_frob_control(p, DCR_IRQ, 0);
+}
+
+/**
+ * parport_ip32_enable_irq - enable interrupts on the rising edge of nACK
+ * @p: pointer to &struct parport
+ */
+static inline void parport_ip32_enable_irq(struct parport *p)
+{
+ __parport_ip32_frob_control(p, DCR_IRQ, DCR_IRQ);
+}
+
+/**
+ * parport_ip32_data_forward - enable host-to-peripheral communications
+ * @p: pointer to &struct parport
+ *
+ * Enable the data line drivers, for 8-bit host-to-peripheral communications.
+ */
+static inline void parport_ip32_data_forward(struct parport *p)
+{
+ __parport_ip32_frob_control(p, DCR_DIR, 0);
+}
+
+/**
+ * parport_ip32_data_reverse - enable peripheral-to-host communications
+ * @p: pointer to &struct parport
+ *
+ * Place the data bus in a high impedance state, if @p->modes has the
+ * PARPORT_MODE_TRISTATE bit set.
+ */
+static inline void parport_ip32_data_reverse(struct parport *p)
+{
+ __parport_ip32_frob_control(p, DCR_DIR, DCR_DIR);
+}
+
+/**
+ * parport_ip32_init_state - for core parport code
+ * @dev: pointer to &struct pardevice
+ * @s: pointer to &struct parport_state to initialize
+ */
+static void parport_ip32_init_state(struct pardevice *dev,
+ struct parport_state *s)
+{
+ s->u.ip32.dcr = DCR_SELECT | DCR_nINIT;
+ s->u.ip32.ecr = ECR_MODE_PS2 | ECR_nERRINTR | ECR_SERVINTR;
+}
+
+/**
+ * parport_ip32_save_state - for core parport code
+ * @p: pointer to &struct parport
+ * @s: pointer to &struct parport_state to save state to
+ */
+static void parport_ip32_save_state(struct parport *p,
+ struct parport_state *s)
+{
+ s->u.ip32.dcr = __parport_ip32_read_control(p);
+ s->u.ip32.ecr = parport_ip32_read_econtrol(p);
+}
+
+/**
+ * parport_ip32_restore_state - for core parport code
+ * @p: pointer to &struct parport
+ * @s: pointer to &struct parport_state to restore state from
+ */
+static void parport_ip32_restore_state(struct parport *p,
+ struct parport_state *s)
+{
+ parport_ip32_set_mode(p, s->u.ip32.ecr & ECR_MODE_MASK);
+ parport_ip32_write_econtrol(p, s->u.ip32.ecr);
+ __parport_ip32_write_control(p, s->u.ip32.dcr);
+}
+
+/*--- EPP mode functions -----------------------------------------------*/
+
+/**
+ * parport_ip32_clear_epp_timeout - clear Timeout bit in EPP mode
+ * @p: pointer to &struct parport
+ *
+ * Returns 1 if the Timeout bit is clear, and 0 otherwise.
+ */
+static unsigned int parport_ip32_clear_epp_timeout(struct parport *p)
+{
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ unsigned int cleared;
+
+ if (!(parport_ip32_read_status(p) & DSR_TIMEOUT))
+ cleared = 1;
+ else {
+ unsigned int r;
+ /* To clear timeout some chips require double read */
+ parport_ip32_read_status(p);
+ r = parport_ip32_read_status(p);
+ /* Some reset by writing 1 */
+ writeb(r | DSR_TIMEOUT, priv->regs.dsr);
+ /* Others by writing 0 */
+ writeb(r & ~DSR_TIMEOUT, priv->regs.dsr);
+
+ r = parport_ip32_read_status(p);
+ cleared = !(r & DSR_TIMEOUT);
+ }
+
+ pr_trace(p, "(): %s", cleared ? "cleared" : "failed");
+ return cleared;
+}
+
+/**
+ * parport_ip32_epp_read - generic EPP read function
+ * @eppreg: I/O register to read from
+ * @p: pointer to &struct parport
+ * @buf: buffer to store read data
+ * @len: length of buffer @buf
+ * @flags: may be PARPORT_EPP_FAST
+ */
+static size_t parport_ip32_epp_read(void __iomem *eppreg,
+ struct parport *p, void *buf,
+ size_t len, int flags)
+{
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ size_t got;
+ parport_ip32_set_mode(p, ECR_MODE_EPP);
+ parport_ip32_data_reverse(p);
+ parport_ip32_write_control(p, DCR_nINIT);
+ if ((flags & PARPORT_EPP_FAST) && (len > 1)) {
+ readsb(eppreg, buf, len);
+ if (readb(priv->regs.dsr) & DSR_TIMEOUT) {
+ parport_ip32_clear_epp_timeout(p);
+ return -EIO;
+ }
+ got = len;
+ } else {
+ u8 *bufp = buf;
+ for (got = 0; got < len; got++) {
+ *bufp++ = readb(eppreg);
+ if (readb(priv->regs.dsr) & DSR_TIMEOUT) {
+ parport_ip32_clear_epp_timeout(p);
+ break;
+ }
+ }
+ }
+ parport_ip32_data_forward(p);
+ parport_ip32_set_mode(p, ECR_MODE_PS2);
+ return got;
+}
+
+/**
+ * parport_ip32_epp_write - generic EPP write function
+ * @eppreg: I/O register to write to
+ * @p: pointer to &struct parport
+ * @buf: buffer of data to write
+ * @len: length of buffer @buf
+ * @flags: may be PARPORT_EPP_FAST
+ */
+static size_t parport_ip32_epp_write(void __iomem *eppreg,
+ struct parport *p, const void *buf,
+ size_t len, int flags)
+{
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ size_t written;
+ parport_ip32_set_mode(p, ECR_MODE_EPP);
+ parport_ip32_data_forward(p);
+ parport_ip32_write_control(p, DCR_nINIT);
+ if ((flags & PARPORT_EPP_FAST) && (len > 1)) {
+ writesb(eppreg, buf, len);
+ if (readb(priv->regs.dsr) & DSR_TIMEOUT) {
+ parport_ip32_clear_epp_timeout(p);
+ return -EIO;
+ }
+ written = len;
+ } else {
+ const u8 *bufp = buf;
+ for (written = 0; written < len; written++) {
+ writeb(*bufp++, eppreg);
+ if (readb(priv->regs.dsr) & DSR_TIMEOUT) {
+ parport_ip32_clear_epp_timeout(p);
+ break;
+ }
+ }
+ }
+ parport_ip32_set_mode(p, ECR_MODE_PS2);
+ return written;
+}
+
+/**
+ * parport_ip32_epp_read_data - read a block of data in EPP mode
+ * @p: pointer to &struct parport
+ * @buf: buffer to store read data
+ * @len: length of buffer @buf
+ * @flags: may be PARPORT_EPP_FAST
+ */
+static size_t parport_ip32_epp_read_data(struct parport *p, void *buf,
+ size_t len, int flags)
+{
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ return parport_ip32_epp_read(priv->regs.eppData0, p, buf, len, flags);
+}
+
+/**
+ * parport_ip32_epp_write_data - write a block of data in EPP mode
+ * @p: pointer to &struct parport
+ * @buf: buffer of data to write
+ * @len: length of buffer @buf
+ * @flags: may be PARPORT_EPP_FAST
+ */
+static size_t parport_ip32_epp_write_data(struct parport *p, const void *buf,
+ size_t len, int flags)
+{
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ return parport_ip32_epp_write(priv->regs.eppData0, p, buf, len, flags);
+}
+
+/**
+ * parport_ip32_epp_read_addr - read a block of addresses in EPP mode
+ * @p: pointer to &struct parport
+ * @buf: buffer to store read data
+ * @len: length of buffer @buf
+ * @flags: may be PARPORT_EPP_FAST
+ */
+static size_t parport_ip32_epp_read_addr(struct parport *p, void *buf,
+ size_t len, int flags)
+{
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ return parport_ip32_epp_read(priv->regs.eppAddr, p, buf, len, flags);
+}
+
+/**
+ * parport_ip32_epp_write_addr - write a block of addresses in EPP mode
+ * @p: pointer to &struct parport
+ * @buf: buffer of data to write
+ * @len: length of buffer @buf
+ * @flags: may be PARPORT_EPP_FAST
+ */
+static size_t parport_ip32_epp_write_addr(struct parport *p, const void *buf,
+ size_t len, int flags)
+{
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ return parport_ip32_epp_write(priv->regs.eppAddr, p, buf, len, flags);
+}
+
+/*--- ECP mode functions (FIFO) ----------------------------------------*/
+
+/**
+ * parport_ip32_fifo_wait_break - check if the waiting function should return
+ * @p: pointer to &struct parport
+ * @expire: timeout expiring date, in jiffies
+ *
+ * parport_ip32_fifo_wait_break() checks if the waiting function should return
+ * immediately or not. The break conditions are:
+ * - expired timeout;
+ * - a pending signal;
+ * - nFault asserted low.
+ * This function also calls cond_resched().
+ */
+static unsigned int parport_ip32_fifo_wait_break(struct parport *p,
+ unsigned long expire)
+{
+ cond_resched();
+ if (time_after(jiffies, expire)) {
+ pr_debug1(PPIP32 "%s: FIFO write timed out\n", p->name);
+ return 1;
+ }
+ if (signal_pending(current)) {
+ pr_debug1(PPIP32 "%s: Signal pending\n", p->name);
+ return 1;
+ }
+ if (!(parport_ip32_read_status(p) & DSR_nFAULT)) {
+ pr_debug1(PPIP32 "%s: nFault asserted low\n", p->name);
+ return 1;
+ }
+ return 0;
+}
+
+/**
+ * parport_ip32_fwp_wait_polling - wait for FIFO to empty (polling)
+ * @p: pointer to &struct parport
+ *
+ * Returns the number of bytes that can safely be written in the FIFO. A
+ * return value of zero means that the calling function should terminate as
+ * fast as possible.
+ */
+static unsigned int parport_ip32_fwp_wait_polling(struct parport *p)
+{
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ struct parport * const physport = p->physport;
+ unsigned long expire;
+ unsigned int count;
+ unsigned int ecr;
+
+ expire = jiffies + physport->cad->timeout;
+ count = 0;
+ while (1) {
+ if (parport_ip32_fifo_wait_break(p, expire))
+ break;
+
+ /* Check FIFO state. We do nothing when the FIFO is nor full,
+ * nor empty. It appears that the FIFO full bit is not always
+ * reliable, the FIFO state is sometimes wrongly reported, and
+ * the chip gets confused if we give it another byte. */
+ ecr = parport_ip32_read_econtrol(p);
+ if (ecr & ECR_F_EMPTY) {
+ /* FIFO is empty, fill it up */
+ count = priv->fifo_depth;
+ break;
+ }
+
+ /* Wait a moment... */
+ udelay(FIFO_POLLING_INTERVAL);
+ } /* while (1) */
+
+ return count;
+}
+
+/**
+ * parport_ip32_fwp_wait_interrupt - wait for FIFO to empty (interrupt-driven)
+ * @p: pointer to &struct parport
+ *
+ * Returns the number of bytes that can safely be written in the FIFO. A
+ * return value of zero means that the calling function should terminate as
+ * fast as possible.
+ */
+static unsigned int parport_ip32_fwp_wait_interrupt(struct parport *p)
+{
+ static unsigned int lost_interrupt = 0;
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ struct parport * const physport = p->physport;
+ unsigned long nfault_timeout;
+ unsigned long expire;
+ unsigned int count;
+ unsigned int ecr;
+
+ nfault_timeout = min((unsigned long)physport->cad->timeout,
+ msecs_to_jiffies(FIFO_NFAULT_TIMEOUT));
+ expire = jiffies + physport->cad->timeout;
+ count = 0;
+ while (1) {
+ if (parport_ip32_fifo_wait_break(p, expire))
+ break;
+
+ /* Initialize mutex used to take interrupts into account */
+ reinit_completion(&priv->irq_complete);
+
+ /* Enable serviceIntr */
+ parport_ip32_frob_econtrol(p, ECR_SERVINTR, 0);
+
+ /* Enabling serviceIntr while the FIFO is empty does not
+ * always generate an interrupt, so check for emptiness
+ * now. */
+ ecr = parport_ip32_read_econtrol(p);
+ if (!(ecr & ECR_F_EMPTY)) {
+ /* FIFO is not empty: wait for an interrupt or a
+ * timeout to occur */
+ wait_for_completion_interruptible_timeout(
+ &priv->irq_complete, nfault_timeout);
+ ecr = parport_ip32_read_econtrol(p);
+ if ((ecr & ECR_F_EMPTY) && !(ecr & ECR_SERVINTR)
+ && !lost_interrupt) {
+ printk(KERN_WARNING PPIP32
+ "%s: lost interrupt in %s\n",
+ p->name, __func__);
+ lost_interrupt = 1;
+ }
+ }
+
+ /* Disable serviceIntr */
+ parport_ip32_frob_econtrol(p, ECR_SERVINTR, ECR_SERVINTR);
+
+ /* Check FIFO state */
+ if (ecr & ECR_F_EMPTY) {
+ /* FIFO is empty, fill it up */
+ count = priv->fifo_depth;
+ break;
+ } else if (ecr & ECR_SERVINTR) {
+ /* FIFO is not empty, but we know that can safely push
+ * writeIntrThreshold bytes into it */
+ count = priv->writeIntrThreshold;
+ break;
+ }
+ /* FIFO is not empty, and we did not get any interrupt.
+ * Either it's time to check for nFault, or a signal is
+ * pending. This is verified in
+ * parport_ip32_fifo_wait_break(), so we continue the loop. */
+ } /* while (1) */
+
+ return count;
+}
+
+/**
+ * parport_ip32_fifo_write_block_pio - write a block of data (PIO mode)
+ * @p: pointer to &struct parport
+ * @buf: buffer of data to write
+ * @len: length of buffer @buf
+ *
+ * Uses PIO to write the contents of the buffer @buf into the parallel port
+ * FIFO. Returns the number of bytes that were actually written. It can work
+ * with or without the help of interrupts. The parallel port must be
+ * correctly initialized before calling parport_ip32_fifo_write_block_pio().
+ */
+static size_t parport_ip32_fifo_write_block_pio(struct parport *p,
+ const void *buf, size_t len)
+{
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ const u8 *bufp = buf;
+ size_t left = len;
+
+ priv->irq_mode = PARPORT_IP32_IRQ_HERE;
+
+ while (left > 0) {
+ unsigned int count;
+
+ count = (p->irq == PARPORT_IRQ_NONE) ?
+ parport_ip32_fwp_wait_polling(p) :
+ parport_ip32_fwp_wait_interrupt(p);
+ if (count == 0)
+ break; /* Transmission should be stopped */
+ if (count > left)
+ count = left;
+ if (count == 1) {
+ writeb(*bufp, priv->regs.fifo);
+ bufp++, left--;
+ } else {
+ writesb(priv->regs.fifo, bufp, count);
+ bufp += count, left -= count;
+ }
+ }
+
+ priv->irq_mode = PARPORT_IP32_IRQ_FWD;
+
+ return len - left;
+}
+
+/**
+ * parport_ip32_fifo_write_block_dma - write a block of data (DMA mode)
+ * @p: pointer to &struct parport
+ * @buf: buffer of data to write
+ * @len: length of buffer @buf
+ *
+ * Uses DMA to write the contents of the buffer @buf into the parallel port
+ * FIFO. Returns the number of bytes that were actually written. The
+ * parallel port must be correctly initialized before calling
+ * parport_ip32_fifo_write_block_dma().
+ */
+static size_t parport_ip32_fifo_write_block_dma(struct parport *p,
+ const void *buf, size_t len)
+{
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ struct parport * const physport = p->physport;
+ unsigned long nfault_timeout;
+ unsigned long expire;
+ size_t written;
+ unsigned int ecr;
+
+ priv->irq_mode = PARPORT_IP32_IRQ_HERE;
+
+ parport_ip32_dma_start(DMA_TO_DEVICE, (void *)buf, len);
+ reinit_completion(&priv->irq_complete);
+ parport_ip32_frob_econtrol(p, ECR_DMAEN | ECR_SERVINTR, ECR_DMAEN);
+
+ nfault_timeout = min((unsigned long)physport->cad->timeout,
+ msecs_to_jiffies(FIFO_NFAULT_TIMEOUT));
+ expire = jiffies + physport->cad->timeout;
+ while (1) {
+ if (parport_ip32_fifo_wait_break(p, expire))
+ break;
+ wait_for_completion_interruptible_timeout(&priv->irq_complete,
+ nfault_timeout);
+ ecr = parport_ip32_read_econtrol(p);
+ if (ecr & ECR_SERVINTR)
+ break; /* DMA transfer just finished */
+ }
+ parport_ip32_dma_stop();
+ written = len - parport_ip32_dma_get_residue();
+
+ priv->irq_mode = PARPORT_IP32_IRQ_FWD;
+
+ return written;
+}
+
+/**
+ * parport_ip32_fifo_write_block - write a block of data
+ * @p: pointer to &struct parport
+ * @buf: buffer of data to write
+ * @len: length of buffer @buf
+ *
+ * Uses PIO or DMA to write the contents of the buffer @buf into the parallel
+ * p FIFO. Returns the number of bytes that were actually written.
+ */
+static size_t parport_ip32_fifo_write_block(struct parport *p,
+ const void *buf, size_t len)
+{
+ size_t written = 0;
+ if (len)
+ /* FIXME - Maybe some threshold value should be set for @len
+ * under which we revert to PIO mode? */
+ written = (p->modes & PARPORT_MODE_DMA) ?
+ parport_ip32_fifo_write_block_dma(p, buf, len) :
+ parport_ip32_fifo_write_block_pio(p, buf, len);
+ return written;
+}
+
+/**
+ * parport_ip32_drain_fifo - wait for FIFO to empty
+ * @p: pointer to &struct parport
+ * @timeout: timeout, in jiffies
+ *
+ * This function waits for FIFO to empty. It returns 1 when FIFO is empty, or
+ * 0 if the timeout @timeout is reached before, or if a signal is pending.
+ */
+static unsigned int parport_ip32_drain_fifo(struct parport *p,
+ unsigned long timeout)
+{
+ unsigned long expire = jiffies + timeout;
+ unsigned int polling_interval;
+ unsigned int counter;
+
+ /* Busy wait for approx. 200us */
+ for (counter = 0; counter < 40; counter++) {
+ if (parport_ip32_read_econtrol(p) & ECR_F_EMPTY)
+ break;
+ if (time_after(jiffies, expire))
+ break;
+ if (signal_pending(current))
+ break;
+ udelay(5);
+ }
+ /* Poll slowly. Polling interval starts with 1 millisecond, and is
+ * increased exponentially until 128. */
+ polling_interval = 1; /* msecs */
+ while (!(parport_ip32_read_econtrol(p) & ECR_F_EMPTY)) {
+ if (time_after_eq(jiffies, expire))
+ break;
+ msleep_interruptible(polling_interval);
+ if (signal_pending(current))
+ break;
+ if (polling_interval < 128)
+ polling_interval *= 2;
+ }
+
+ return !!(parport_ip32_read_econtrol(p) & ECR_F_EMPTY);
+}
+
+/**
+ * parport_ip32_get_fifo_residue - reset FIFO
+ * @p: pointer to &struct parport
+ * @mode: current operation mode (ECR_MODE_PPF or ECR_MODE_ECP)
+ *
+ * This function resets FIFO, and returns the number of bytes remaining in it.
+ */
+static unsigned int parport_ip32_get_fifo_residue(struct parport *p,
+ unsigned int mode)
+{
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ unsigned int residue;
+ unsigned int cnfga;
+
+ /* FIXME - We are missing one byte if the printer is off-line. I
+ * don't know how to detect this. It looks that the full bit is not
+ * always reliable. For the moment, the problem is avoided in most
+ * cases by testing for BUSY in parport_ip32_compat_write_data().
+ */
+ if (parport_ip32_read_econtrol(p) & ECR_F_EMPTY)
+ residue = 0;
+ else {
+ pr_debug1(PPIP32 "%s: FIFO is stuck\n", p->name);
+
+ /* Stop all transfers.
+ *
+ * Microsoft's document instructs to drive DCR_STROBE to 0,
+ * but it doesn't work (at least in Compatibility mode, not
+ * tested in ECP mode). Switching directly to Test mode (as
+ * in parport_pc) is not an option: it does confuse the port,
+ * ECP service interrupts are no more working after that. A
+ * hard reset is then needed to revert to a sane state.
+ *
+ * Let's hope that the FIFO is really stuck and that the
+ * peripheral doesn't wake up now.
+ */
+ parport_ip32_frob_control(p, DCR_STROBE, 0);
+
+ /* Fill up FIFO */
+ for (residue = priv->fifo_depth; residue > 0; residue--) {
+ if (parport_ip32_read_econtrol(p) & ECR_F_FULL)
+ break;
+ writeb(0x00, priv->regs.fifo);
+ }
+ }
+ if (residue)
+ pr_debug1(PPIP32 "%s: %d PWord%s left in FIFO\n",
+ p->name, residue,
+ (residue == 1) ? " was" : "s were");
+
+ /* Now reset the FIFO */
+ parport_ip32_set_mode(p, ECR_MODE_PS2);
+
+ /* Host recovery for ECP mode */
+ if (mode == ECR_MODE_ECP) {
+ parport_ip32_data_reverse(p);
+ parport_ip32_frob_control(p, DCR_nINIT, 0);
+ if (parport_wait_peripheral(p, DSR_PERROR, 0))
+ pr_debug1(PPIP32 "%s: PEerror timeout 1 in %s\n",
+ p->name, __func__);
+ parport_ip32_frob_control(p, DCR_STROBE, DCR_STROBE);
+ parport_ip32_frob_control(p, DCR_nINIT, DCR_nINIT);
+ if (parport_wait_peripheral(p, DSR_PERROR, DSR_PERROR))
+ pr_debug1(PPIP32 "%s: PEerror timeout 2 in %s\n",
+ p->name, __func__);
+ }
+
+ /* Adjust residue if needed */
+ parport_ip32_set_mode(p, ECR_MODE_CFG);
+ cnfga = readb(priv->regs.cnfgA);
+ if (!(cnfga & CNFGA_nBYTEINTRANS)) {
+ pr_debug1(PPIP32 "%s: cnfgA contains 0x%02x\n",
+ p->name, cnfga);
+ pr_debug1(PPIP32 "%s: Accounting for extra byte\n",
+ p->name);
+ residue++;
+ }
+
+ /* Don't care about partial PWords since we do not support
+ * PWord != 1 byte. */
+
+ /* Back to forward PS2 mode. */
+ parport_ip32_set_mode(p, ECR_MODE_PS2);
+ parport_ip32_data_forward(p);
+
+ return residue;
+}
+
+/**
+ * parport_ip32_compat_write_data - write a block of data in SPP mode
+ * @p: pointer to &struct parport
+ * @buf: buffer of data to write
+ * @len: length of buffer @buf
+ * @flags: ignored
+ */
+static size_t parport_ip32_compat_write_data(struct parport *p,
+ const void *buf, size_t len,
+ int flags)
+{
+ static unsigned int ready_before = 1;
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ struct parport * const physport = p->physport;
+ size_t written = 0;
+
+ /* Special case: a timeout of zero means we cannot call schedule().
+ * Also if O_NONBLOCK is set then use the default implementation. */
+ if (physport->cad->timeout <= PARPORT_INACTIVITY_O_NONBLOCK)
+ return parport_ieee1284_write_compat(p, buf, len, flags);
+
+ /* Reset FIFO, go in forward mode, and disable ackIntEn */
+ parport_ip32_set_mode(p, ECR_MODE_PS2);
+ parport_ip32_write_control(p, DCR_SELECT | DCR_nINIT);
+ parport_ip32_data_forward(p);
+ parport_ip32_disable_irq(p);
+ parport_ip32_set_mode(p, ECR_MODE_PPF);
+ physport->ieee1284.phase = IEEE1284_PH_FWD_DATA;
+
+ /* Wait for peripheral to become ready */
+ if (parport_wait_peripheral(p, DSR_nBUSY | DSR_nFAULT,
+ DSR_nBUSY | DSR_nFAULT)) {
+ /* Avoid to flood the logs */
+ if (ready_before)
+ printk(KERN_INFO PPIP32 "%s: not ready in %s\n",
+ p->name, __func__);
+ ready_before = 0;
+ goto stop;
+ }
+ ready_before = 1;
+
+ written = parport_ip32_fifo_write_block(p, buf, len);
+
+ /* Wait FIFO to empty. Timeout is proportional to FIFO_depth. */
+ parport_ip32_drain_fifo(p, physport->cad->timeout * priv->fifo_depth);
+
+ /* Check for a potential residue */
+ written -= parport_ip32_get_fifo_residue(p, ECR_MODE_PPF);
+
+ /* Then, wait for BUSY to get low. */
+ if (parport_wait_peripheral(p, DSR_nBUSY, DSR_nBUSY))
+ printk(KERN_DEBUG PPIP32 "%s: BUSY timeout in %s\n",
+ p->name, __func__);
+
+stop:
+ /* Reset FIFO */
+ parport_ip32_set_mode(p, ECR_MODE_PS2);
+ physport->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
+
+ return written;
+}
+
+/*
+ * FIXME - Insert here parport_ip32_ecp_read_data().
+ */
+
+/**
+ * parport_ip32_ecp_write_data - write a block of data in ECP mode
+ * @p: pointer to &struct parport
+ * @buf: buffer of data to write
+ * @len: length of buffer @buf
+ * @flags: ignored
+ */
+static size_t parport_ip32_ecp_write_data(struct parport *p,
+ const void *buf, size_t len,
+ int flags)
+{
+ static unsigned int ready_before = 1;
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ struct parport * const physport = p->physport;
+ size_t written = 0;
+
+ /* Special case: a timeout of zero means we cannot call schedule().
+ * Also if O_NONBLOCK is set then use the default implementation. */
+ if (physport->cad->timeout <= PARPORT_INACTIVITY_O_NONBLOCK)
+ return parport_ieee1284_ecp_write_data(p, buf, len, flags);
+
+ /* Negotiate to forward mode if necessary. */
+ if (physport->ieee1284.phase != IEEE1284_PH_FWD_IDLE) {
+ /* Event 47: Set nInit high. */
+ parport_ip32_frob_control(p, DCR_nINIT | DCR_AUTOFD,
+ DCR_nINIT | DCR_AUTOFD);
+
+ /* Event 49: PError goes high. */
+ if (parport_wait_peripheral(p, DSR_PERROR, DSR_PERROR)) {
+ printk(KERN_DEBUG PPIP32 "%s: PError timeout in %s",
+ p->name, __func__);
+ physport->ieee1284.phase = IEEE1284_PH_ECP_DIR_UNKNOWN;
+ return 0;
+ }
+ }
+
+ /* Reset FIFO, go in forward mode, and disable ackIntEn */
+ parport_ip32_set_mode(p, ECR_MODE_PS2);
+ parport_ip32_write_control(p, DCR_SELECT | DCR_nINIT);
+ parport_ip32_data_forward(p);
+ parport_ip32_disable_irq(p);
+ parport_ip32_set_mode(p, ECR_MODE_ECP);
+ physport->ieee1284.phase = IEEE1284_PH_FWD_DATA;
+
+ /* Wait for peripheral to become ready */
+ if (parport_wait_peripheral(p, DSR_nBUSY | DSR_nFAULT,
+ DSR_nBUSY | DSR_nFAULT)) {
+ /* Avoid to flood the logs */
+ if (ready_before)
+ printk(KERN_INFO PPIP32 "%s: not ready in %s\n",
+ p->name, __func__);
+ ready_before = 0;
+ goto stop;
+ }
+ ready_before = 1;
+
+ written = parport_ip32_fifo_write_block(p, buf, len);
+
+ /* Wait FIFO to empty. Timeout is proportional to FIFO_depth. */
+ parport_ip32_drain_fifo(p, physport->cad->timeout * priv->fifo_depth);
+
+ /* Check for a potential residue */
+ written -= parport_ip32_get_fifo_residue(p, ECR_MODE_ECP);
+
+ /* Then, wait for BUSY to get low. */
+ if (parport_wait_peripheral(p, DSR_nBUSY, DSR_nBUSY))
+ printk(KERN_DEBUG PPIP32 "%s: BUSY timeout in %s\n",
+ p->name, __func__);
+
+stop:
+ /* Reset FIFO */
+ parport_ip32_set_mode(p, ECR_MODE_PS2);
+ physport->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
+
+ return written;
+}
+
+/*
+ * FIXME - Insert here parport_ip32_ecp_write_addr().
+ */
+
+/*--- Default parport operations ---------------------------------------*/
+
+static __initdata struct parport_operations parport_ip32_ops = {
+ .write_data = parport_ip32_write_data,
+ .read_data = parport_ip32_read_data,
+
+ .write_control = parport_ip32_write_control,
+ .read_control = parport_ip32_read_control,
+ .frob_control = parport_ip32_frob_control,
+
+ .read_status = parport_ip32_read_status,
+
+ .enable_irq = parport_ip32_enable_irq,
+ .disable_irq = parport_ip32_disable_irq,
+
+ .data_forward = parport_ip32_data_forward,
+ .data_reverse = parport_ip32_data_reverse,
+
+ .init_state = parport_ip32_init_state,
+ .save_state = parport_ip32_save_state,
+ .restore_state = parport_ip32_restore_state,
+
+ .epp_write_data = parport_ieee1284_epp_write_data,
+ .epp_read_data = parport_ieee1284_epp_read_data,
+ .epp_write_addr = parport_ieee1284_epp_write_addr,
+ .epp_read_addr = parport_ieee1284_epp_read_addr,
+
+ .ecp_write_data = parport_ieee1284_ecp_write_data,
+ .ecp_read_data = parport_ieee1284_ecp_read_data,
+ .ecp_write_addr = parport_ieee1284_ecp_write_addr,
+
+ .compat_write_data = parport_ieee1284_write_compat,
+ .nibble_read_data = parport_ieee1284_read_nibble,
+ .byte_read_data = parport_ieee1284_read_byte,
+
+ .owner = THIS_MODULE,
+};
+
+/*--- Device detection -------------------------------------------------*/
+
+/**
+ * parport_ip32_ecp_supported - check for an ECP port
+ * @p: pointer to the &parport structure
+ *
+ * Returns 1 if an ECP port is found, and 0 otherwise. This function actually
+ * checks if an Extended Control Register seems to be present. On successful
+ * return, the port is placed in SPP mode.
+ */
+static __init unsigned int parport_ip32_ecp_supported(struct parport *p)
+{
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ unsigned int ecr;
+
+ ecr = ECR_MODE_PS2 | ECR_nERRINTR | ECR_SERVINTR;
+ writeb(ecr, priv->regs.ecr);
+ if (readb(priv->regs.ecr) != (ecr | ECR_F_EMPTY))
+ goto fail;
+
+ pr_probe(p, "Found working ECR register\n");
+ parport_ip32_set_mode(p, ECR_MODE_SPP);
+ parport_ip32_write_control(p, DCR_SELECT | DCR_nINIT);
+ return 1;
+
+fail:
+ pr_probe(p, "ECR register not found\n");
+ return 0;
+}
+
+/**
+ * parport_ip32_fifo_supported - check for FIFO parameters
+ * @p: pointer to the &parport structure
+ *
+ * Check for FIFO parameters of an Extended Capabilities Port. Returns 1 on
+ * success, and 0 otherwise. Adjust FIFO parameters in the parport structure.
+ * On return, the port is placed in SPP mode.
+ */
+static __init unsigned int parport_ip32_fifo_supported(struct parport *p)
+{
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ unsigned int configa, configb;
+ unsigned int pword;
+ unsigned int i;
+
+ /* Configuration mode */
+ parport_ip32_set_mode(p, ECR_MODE_CFG);
+ configa = readb(priv->regs.cnfgA);
+ configb = readb(priv->regs.cnfgB);
+
+ /* Find out PWord size */
+ switch (configa & CNFGA_ID_MASK) {
+ case CNFGA_ID_8:
+ pword = 1;
+ break;
+ case CNFGA_ID_16:
+ pword = 2;
+ break;
+ case CNFGA_ID_32:
+ pword = 4;
+ break;
+ default:
+ pr_probe(p, "Unknown implementation ID: 0x%0x\n",
+ (configa & CNFGA_ID_MASK) >> CNFGA_ID_SHIFT);
+ goto fail;
+ break;
+ }
+ if (pword != 1) {
+ pr_probe(p, "Unsupported PWord size: %u\n", pword);
+ goto fail;
+ }
+ priv->pword = pword;
+ pr_probe(p, "PWord is %u bits\n", 8 * priv->pword);
+
+ /* Check for compression support */
+ writeb(configb | CNFGB_COMPRESS, priv->regs.cnfgB);
+ if (readb(priv->regs.cnfgB) & CNFGB_COMPRESS)
+ pr_probe(p, "Hardware compression detected (unsupported)\n");
+ writeb(configb & ~CNFGB_COMPRESS, priv->regs.cnfgB);
+
+ /* Reset FIFO and go in test mode (no interrupt, no DMA) */
+ parport_ip32_set_mode(p, ECR_MODE_TST);
+
+ /* FIFO must be empty now */
+ if (!(readb(priv->regs.ecr) & ECR_F_EMPTY)) {
+ pr_probe(p, "FIFO not reset\n");
+ goto fail;
+ }
+
+ /* Find out FIFO depth. */
+ priv->fifo_depth = 0;
+ for (i = 0; i < 1024; i++) {
+ if (readb(priv->regs.ecr) & ECR_F_FULL) {
+ /* FIFO full */
+ priv->fifo_depth = i;
+ break;
+ }
+ writeb((u8)i, priv->regs.fifo);
+ }
+ if (i >= 1024) {
+ pr_probe(p, "Can't fill FIFO\n");
+ goto fail;
+ }
+ if (!priv->fifo_depth) {
+ pr_probe(p, "Can't get FIFO depth\n");
+ goto fail;
+ }
+ pr_probe(p, "FIFO is %u PWords deep\n", priv->fifo_depth);
+
+ /* Enable interrupts */
+ parport_ip32_frob_econtrol(p, ECR_SERVINTR, 0);
+
+ /* Find out writeIntrThreshold: number of PWords we know we can write
+ * if we get an interrupt. */
+ priv->writeIntrThreshold = 0;
+ for (i = 0; i < priv->fifo_depth; i++) {
+ if (readb(priv->regs.fifo) != (u8)i) {
+ pr_probe(p, "Invalid data in FIFO\n");
+ goto fail;
+ }
+ if (!priv->writeIntrThreshold
+ && readb(priv->regs.ecr) & ECR_SERVINTR)
+ /* writeIntrThreshold reached */
+ priv->writeIntrThreshold = i + 1;
+ if (i + 1 < priv->fifo_depth
+ && readb(priv->regs.ecr) & ECR_F_EMPTY) {
+ /* FIFO empty before the last byte? */
+ pr_probe(p, "Data lost in FIFO\n");
+ goto fail;
+ }
+ }
+ if (!priv->writeIntrThreshold) {
+ pr_probe(p, "Can't get writeIntrThreshold\n");
+ goto fail;
+ }
+ pr_probe(p, "writeIntrThreshold is %u\n", priv->writeIntrThreshold);
+
+ /* FIFO must be empty now */
+ if (!(readb(priv->regs.ecr) & ECR_F_EMPTY)) {
+ pr_probe(p, "Can't empty FIFO\n");
+ goto fail;
+ }
+
+ /* Reset FIFO */
+ parport_ip32_set_mode(p, ECR_MODE_PS2);
+ /* Set reverse direction (must be in PS2 mode) */
+ parport_ip32_data_reverse(p);
+ /* Test FIFO, no interrupt, no DMA */
+ parport_ip32_set_mode(p, ECR_MODE_TST);
+ /* Enable interrupts */
+ parport_ip32_frob_econtrol(p, ECR_SERVINTR, 0);
+
+ /* Find out readIntrThreshold: number of PWords we can read if we get
+ * an interrupt. */
+ priv->readIntrThreshold = 0;
+ for (i = 0; i < priv->fifo_depth; i++) {
+ writeb(0xaa, priv->regs.fifo);
+ if (readb(priv->regs.ecr) & ECR_SERVINTR) {
+ /* readIntrThreshold reached */
+ priv->readIntrThreshold = i + 1;
+ break;
+ }
+ }
+ if (!priv->readIntrThreshold) {
+ pr_probe(p, "Can't get readIntrThreshold\n");
+ goto fail;
+ }
+ pr_probe(p, "readIntrThreshold is %u\n", priv->readIntrThreshold);
+
+ /* Reset ECR */
+ parport_ip32_set_mode(p, ECR_MODE_PS2);
+ parport_ip32_data_forward(p);
+ parport_ip32_set_mode(p, ECR_MODE_SPP);
+ return 1;
+
+fail:
+ priv->fifo_depth = 0;
+ parport_ip32_set_mode(p, ECR_MODE_SPP);
+ return 0;
+}
+
+/*--- Initialization code ----------------------------------------------*/
+
+/**
+ * parport_ip32_make_isa_registers - compute (ISA) register addresses
+ * @regs: pointer to &struct parport_ip32_regs to fill
+ * @base: base address of standard and EPP registers
+ * @base_hi: base address of ECP registers
+ * @regshift: how much to shift register offset by
+ *
+ * Compute register addresses, according to the ISA standard. The addresses
+ * of the standard and EPP registers are computed from address @base. The
+ * addresses of the ECP registers are computed from address @base_hi.
+ */
+static void __init
+parport_ip32_make_isa_registers(struct parport_ip32_regs *regs,
+ void __iomem *base, void __iomem *base_hi,
+ unsigned int regshift)
+{
+#define r_base(offset) ((u8 __iomem *)base + ((offset) << regshift))
+#define r_base_hi(offset) ((u8 __iomem *)base_hi + ((offset) << regshift))
+ *regs = (struct parport_ip32_regs){
+ .data = r_base(0),
+ .dsr = r_base(1),
+ .dcr = r_base(2),
+ .eppAddr = r_base(3),
+ .eppData0 = r_base(4),
+ .eppData1 = r_base(5),
+ .eppData2 = r_base(6),
+ .eppData3 = r_base(7),
+ .ecpAFifo = r_base(0),
+ .fifo = r_base_hi(0),
+ .cnfgA = r_base_hi(0),
+ .cnfgB = r_base_hi(1),
+ .ecr = r_base_hi(2)
+ };
+#undef r_base_hi
+#undef r_base
+}
+
+/**
+ * parport_ip32_probe_port - probe and register IP32 built-in parallel port
+ *
+ * Returns the new allocated &parport structure. On error, an error code is
+ * encoded in return value with the ERR_PTR function.
+ */
+static __init struct parport *parport_ip32_probe_port(void)
+{
+ struct parport_ip32_regs regs;
+ struct parport_ip32_private *priv = NULL;
+ struct parport_operations *ops = NULL;
+ struct parport *p = NULL;
+ int err;
+
+ parport_ip32_make_isa_registers(®s, &mace->isa.parallel,
+ &mace->isa.ecp1284, 8 /* regshift */);
+
+ ops = kmalloc(sizeof(struct parport_operations), GFP_KERNEL);
+ priv = kmalloc(sizeof(struct parport_ip32_private), GFP_KERNEL);
+ p = parport_register_port(0, PARPORT_IRQ_NONE, PARPORT_DMA_NONE, ops);
+ if (ops == NULL || priv == NULL || p == NULL) {
+ err = -ENOMEM;
+ goto fail;
+ }
+ p->base = MACE_BASE + offsetof(struct sgi_mace, isa.parallel);
+ p->base_hi = MACE_BASE + offsetof(struct sgi_mace, isa.ecp1284);
+ p->private_data = priv;
+
+ *ops = parport_ip32_ops;
+ *priv = (struct parport_ip32_private){
+ .regs = regs,
+ .dcr_writable = DCR_DIR | DCR_SELECT | DCR_nINIT |
+ DCR_AUTOFD | DCR_STROBE,
+ .irq_mode = PARPORT_IP32_IRQ_FWD,
+ };
+ init_completion(&priv->irq_complete);
+
+ /* Probe port. */
+ if (!parport_ip32_ecp_supported(p)) {
+ err = -ENODEV;
+ goto fail;
+ }
+ parport_ip32_dump_state(p, "begin init", 0);
+
+ /* We found what looks like a working ECR register. Simply assume
+ * that all modes are correctly supported. Enable basic modes. */
+ p->modes = PARPORT_MODE_PCSPP | PARPORT_MODE_SAFEININT;
+ p->modes |= PARPORT_MODE_TRISTATE;
+
+ if (!parport_ip32_fifo_supported(p)) {
+ printk(KERN_WARNING PPIP32
+ "%s: error: FIFO disabled\n", p->name);
+ /* Disable hardware modes depending on a working FIFO. */
+ features &= ~PARPORT_IP32_ENABLE_SPP;
+ features &= ~PARPORT_IP32_ENABLE_ECP;
+ /* DMA is not needed if FIFO is not supported. */
+ features &= ~PARPORT_IP32_ENABLE_DMA;
+ }
+
+ /* Request IRQ */
+ if (features & PARPORT_IP32_ENABLE_IRQ) {
+ int irq = MACEISA_PARALLEL_IRQ;
+ if (request_irq(irq, parport_ip32_interrupt, 0, p->name, p)) {
+ printk(KERN_WARNING PPIP32
+ "%s: error: IRQ disabled\n", p->name);
+ /* DMA cannot work without interrupts. */
+ features &= ~PARPORT_IP32_ENABLE_DMA;
+ } else {
+ pr_probe(p, "Interrupt support enabled\n");
+ p->irq = irq;
+ priv->dcr_writable |= DCR_IRQ;
+ }
+ }
+
+ /* Allocate DMA resources */
+ if (features & PARPORT_IP32_ENABLE_DMA) {
+ if (parport_ip32_dma_register())
+ printk(KERN_WARNING PPIP32
+ "%s: error: DMA disabled\n", p->name);
+ else {
+ pr_probe(p, "DMA support enabled\n");
+ p->dma = 0; /* arbitrary value != PARPORT_DMA_NONE */
+ p->modes |= PARPORT_MODE_DMA;
+ }
+ }
+
+ if (features & PARPORT_IP32_ENABLE_SPP) {
+ /* Enable compatibility FIFO mode */
+ p->ops->compat_write_data = parport_ip32_compat_write_data;
+ p->modes |= PARPORT_MODE_COMPAT;
+ pr_probe(p, "Hardware support for SPP mode enabled\n");
+ }
+ if (features & PARPORT_IP32_ENABLE_EPP) {
+ /* Set up access functions to use EPP hardware. */
+ p->ops->epp_read_data = parport_ip32_epp_read_data;
+ p->ops->epp_write_data = parport_ip32_epp_write_data;
+ p->ops->epp_read_addr = parport_ip32_epp_read_addr;
+ p->ops->epp_write_addr = parport_ip32_epp_write_addr;
+ p->modes |= PARPORT_MODE_EPP;
+ pr_probe(p, "Hardware support for EPP mode enabled\n");
+ }
+ if (features & PARPORT_IP32_ENABLE_ECP) {
+ /* Enable ECP FIFO mode */
+ p->ops->ecp_write_data = parport_ip32_ecp_write_data;
+ /* FIXME - not implemented */
+/* p->ops->ecp_read_data = parport_ip32_ecp_read_data; */
+/* p->ops->ecp_write_addr = parport_ip32_ecp_write_addr; */
+ p->modes |= PARPORT_MODE_ECP;
+ pr_probe(p, "Hardware support for ECP mode enabled\n");
+ }
+
+ /* Initialize the port with sensible values */
+ parport_ip32_set_mode(p, ECR_MODE_PS2);
+ parport_ip32_write_control(p, DCR_SELECT | DCR_nINIT);
+ parport_ip32_data_forward(p);
+ parport_ip32_disable_irq(p);
+ parport_ip32_write_data(p, 0x00);
+ parport_ip32_dump_state(p, "end init", 0);
+
+ /* Print out what we found */
+ printk(KERN_INFO "%s: SGI IP32 at 0x%lx (0x%lx)",
+ p->name, p->base, p->base_hi);
+ if (p->irq != PARPORT_IRQ_NONE)
+ printk(", irq %d", p->irq);
+ printk(" [");
+#define printmode(x) if (p->modes & PARPORT_MODE_##x) \
+ printk("%s%s", f++ ? "," : "", #x)
+ {
+ unsigned int f = 0;
+ printmode(PCSPP);
+ printmode(TRISTATE);
+ printmode(COMPAT);
+ printmode(EPP);
+ printmode(ECP);
+ printmode(DMA);
+ }
+#undef printmode
+ printk("]\n");
+
+ parport_announce_port(p);
+ return p;
+
+fail:
+ if (p)
+ parport_put_port(p);
+ kfree(priv);
+ kfree(ops);
+ return ERR_PTR(err);
+}
+
+/**
+ * parport_ip32_unregister_port - unregister a parallel port
+ * @p: pointer to the &struct parport
+ *
+ * Unregisters a parallel port and free previously allocated resources
+ * (memory, IRQ, ...).
+ */
+static __exit void parport_ip32_unregister_port(struct parport *p)
+{
+ struct parport_ip32_private * const priv = p->physport->private_data;
+ struct parport_operations *ops = p->ops;
+
+ parport_remove_port(p);
+ if (p->modes & PARPORT_MODE_DMA)
+ parport_ip32_dma_unregister();
+ if (p->irq != PARPORT_IRQ_NONE)
+ free_irq(p->irq, p);
+ parport_put_port(p);
+ kfree(priv);
+ kfree(ops);
+}
+
+/**
+ * parport_ip32_init - module initialization function
+ */
+static int __init parport_ip32_init(void)
+{
+ pr_info(PPIP32 "SGI IP32 built-in parallel port driver v0.6\n");
+ this_port = parport_ip32_probe_port();
+ return PTR_ERR_OR_ZERO(this_port);
+}
+
+/**
+ * parport_ip32_exit - module termination function
+ */
+static void __exit parport_ip32_exit(void)
+{
+ parport_ip32_unregister_port(this_port);
+}
+
+/*--- Module stuff -----------------------------------------------------*/
+
+MODULE_AUTHOR("Arnaud Giersch <arnaud.giersch@free.fr>");
+MODULE_DESCRIPTION("SGI IP32 built-in parallel port driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("0.6"); /* update in parport_ip32_init() too */
+
+module_init(parport_ip32_init);
+module_exit(parport_ip32_exit);
+
+module_param(verbose_probing, bool, S_IRUGO);
+MODULE_PARM_DESC(verbose_probing, "Log chit-chat during initialization");
+
+module_param(features, uint, S_IRUGO);
+MODULE_PARM_DESC(features,
+ "Bit mask of features to enable"
+ ", bit 0: IRQ support"
+ ", bit 1: DMA support"
+ ", bit 2: hardware SPP mode"
+ ", bit 3: hardware EPP mode"
+ ", bit 4: hardware ECP mode");
+
+/*--- Inform (X)Emacs about preferred coding style ---------------------*/
+/*
+ * Local Variables:
+ * mode: c
+ * c-file-style: "linux"
+ * indent-tabs-mode: t
+ * tab-width: 8
+ * fill-column: 78
+ * ispell-local-dictionary: "american"
+ * End:
+ */
Code Review / kvmfornfv.git / blobdiff