--- /dev/null
+/*
+ * This file is part of wl1271
+ *
+ * Copyright (C) 2008-2010 Nokia Corporation
+ *
+ * Contact: Luciano Coelho <luciano.coelho@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/interrupt.h>
+
+#include "wlcore.h"
+#include "debug.h"
+#include "wl12xx_80211.h"
+#include "io.h"
+#include "tx.h"
+
+bool wl1271_set_block_size(struct wl1271 *wl)
+{
+ if (wl->if_ops->set_block_size) {
+ wl->if_ops->set_block_size(wl->dev, WL12XX_BUS_BLOCK_SIZE);
+ return true;
+ }
+
+ return false;
+}
+
+void wlcore_disable_interrupts(struct wl1271 *wl)
+{
+ disable_irq(wl->irq);
+}
+EXPORT_SYMBOL_GPL(wlcore_disable_interrupts);
+
+void wlcore_disable_interrupts_nosync(struct wl1271 *wl)
+{
+ disable_irq_nosync(wl->irq);
+}
+EXPORT_SYMBOL_GPL(wlcore_disable_interrupts_nosync);
+
+void wlcore_enable_interrupts(struct wl1271 *wl)
+{
+ enable_irq(wl->irq);
+}
+EXPORT_SYMBOL_GPL(wlcore_enable_interrupts);
+
+void wlcore_synchronize_interrupts(struct wl1271 *wl)
+{
+ synchronize_irq(wl->irq);
+}
+EXPORT_SYMBOL_GPL(wlcore_synchronize_interrupts);
+
+int wlcore_translate_addr(struct wl1271 *wl, int addr)
+{
+ struct wlcore_partition_set *part = &wl->curr_part;
+
+ /*
+ * To translate, first check to which window of addresses the
+ * particular address belongs. Then subtract the starting address
+ * of that window from the address. Then, add offset of the
+ * translated region.
+ *
+ * The translated regions occur next to each other in physical device
+ * memory, so just add the sizes of the preceding address regions to
+ * get the offset to the new region.
+ */
+ if ((addr >= part->mem.start) &&
+ (addr < part->mem.start + part->mem.size))
+ return addr - part->mem.start;
+ else if ((addr >= part->reg.start) &&
+ (addr < part->reg.start + part->reg.size))
+ return addr - part->reg.start + part->mem.size;
+ else if ((addr >= part->mem2.start) &&
+ (addr < part->mem2.start + part->mem2.size))
+ return addr - part->mem2.start + part->mem.size +
+ part->reg.size;
+ else if ((addr >= part->mem3.start) &&
+ (addr < part->mem3.start + part->mem3.size))
+ return addr - part->mem3.start + part->mem.size +
+ part->reg.size + part->mem2.size;
+
+ WARN(1, "HW address 0x%x out of range", addr);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(wlcore_translate_addr);
+
+/* Set the partitions to access the chip addresses
+ *
+ * To simplify driver code, a fixed (virtual) memory map is defined for
+ * register and memory addresses. Because in the chipset, in different stages
+ * of operation, those addresses will move around, an address translation
+ * mechanism is required.
+ *
+ * There are four partitions (three memory and one register partition),
+ * which are mapped to two different areas of the hardware memory.
+ *
+ * Virtual address
+ * space
+ *
+ * | |
+ * ...+----+--> mem.start
+ * Physical address ... | |
+ * space ... | | [PART_0]
+ * ... | |
+ * 00000000 <--+----+... ...+----+--> mem.start + mem.size
+ * | | ... | |
+ * |MEM | ... | |
+ * | | ... | |
+ * mem.size <--+----+... | | {unused area)
+ * | | ... | |
+ * |REG | ... | |
+ * mem.size | | ... | |
+ * + <--+----+... ...+----+--> reg.start
+ * reg.size | | ... | |
+ * |MEM2| ... | | [PART_1]
+ * | | ... | |
+ * ...+----+--> reg.start + reg.size
+ * | |
+ *
+ */
+int wlcore_set_partition(struct wl1271 *wl,
+ const struct wlcore_partition_set *p)
+{
+ int ret;
+
+ /* copy partition info */
+ memcpy(&wl->curr_part, p, sizeof(*p));
+
+ wl1271_debug(DEBUG_IO, "mem_start %08X mem_size %08X",
+ p->mem.start, p->mem.size);
+ wl1271_debug(DEBUG_IO, "reg_start %08X reg_size %08X",
+ p->reg.start, p->reg.size);
+ wl1271_debug(DEBUG_IO, "mem2_start %08X mem2_size %08X",
+ p->mem2.start, p->mem2.size);
+ wl1271_debug(DEBUG_IO, "mem3_start %08X mem3_size %08X",
+ p->mem3.start, p->mem3.size);
+
+ ret = wlcore_raw_write32(wl, HW_PART0_START_ADDR, p->mem.start);
+ if (ret < 0)
+ goto out;
+
+ ret = wlcore_raw_write32(wl, HW_PART0_SIZE_ADDR, p->mem.size);
+ if (ret < 0)
+ goto out;
+
+ ret = wlcore_raw_write32(wl, HW_PART1_START_ADDR, p->reg.start);
+ if (ret < 0)
+ goto out;
+
+ ret = wlcore_raw_write32(wl, HW_PART1_SIZE_ADDR, p->reg.size);
+ if (ret < 0)
+ goto out;
+
+ ret = wlcore_raw_write32(wl, HW_PART2_START_ADDR, p->mem2.start);
+ if (ret < 0)
+ goto out;
+
+ ret = wlcore_raw_write32(wl, HW_PART2_SIZE_ADDR, p->mem2.size);
+ if (ret < 0)
+ goto out;
+
+ /*
+ * We don't need the size of the last partition, as it is
+ * automatically calculated based on the total memory size and
+ * the sizes of the previous partitions.
+ */
+ ret = wlcore_raw_write32(wl, HW_PART3_START_ADDR, p->mem3.start);
+
+out:
+ return ret;
+}
+EXPORT_SYMBOL_GPL(wlcore_set_partition);
+
+void wl1271_io_reset(struct wl1271 *wl)
+{
+ if (wl->if_ops->reset)
+ wl->if_ops->reset(wl->dev);
+}
+
+void wl1271_io_init(struct wl1271 *wl)
+{
+ if (wl->if_ops->init)
+ wl->if_ops->init(wl->dev);
+}
Code Review / kvmfornfv.git / blobdiff