#include <linux/ip.h>
#include <linux/firmware.h>
#include <linux/etherdevice.h>
+#include <linux/irq.h>
#include "../wlcore/wlcore.h"
#include "../wlcore/debug.h"
.num_probe_reqs = 2,
.rssi_threshold = -90,
.snr_threshold = 0,
+ .num_short_intervals = SCAN_MAX_SHORT_INTERVALS,
+ .long_interval = 30000,
},
.ht = {
.rx_ba_win_size = 32,
static const struct wlcore_partition_set wl18xx_ptable[PART_TABLE_LEN] = {
[PART_TOP_PRCM_ELP_SOC] = {
- .mem = { .start = 0x00A02000, .size = 0x00010000 },
+ .mem = { .start = 0x00A00000, .size = 0x00012000 },
.reg = { .start = 0x00807000, .size = 0x00005000 },
.mem2 = { .start = 0x00800000, .size = 0x0000B000 },
.mem3 = { .start = 0x00000000, .size = 0x00000000 },
{
u32 tmp;
int ret;
+ u16 irq_invert;
BUILD_BUG_ON(sizeof(struct wl18xx_mac_and_phy_params) >
WL18XX_PHY_INIT_MEM_SIZE);
/* re-enable FDSP clock */
ret = wlcore_write32(wl, WL18XX_PHY_FPGA_SPARE_1,
MEM_FDSP_CLK_120_ENABLE);
+ if (ret < 0)
+ goto out;
+
+ ret = irq_get_trigger_type(wl->irq);
+ if ((ret == IRQ_TYPE_LEVEL_LOW) || (ret == IRQ_TYPE_EDGE_FALLING)) {
+ wl1271_info("using inverted interrupt logic: %d", ret);
+ ret = wlcore_set_partition(wl,
+ &wl->ptable[PART_TOP_PRCM_ELP_SOC]);
+ if (ret < 0)
+ goto out;
+
+ ret = wl18xx_top_reg_read(wl, TOP_FN0_CCCR_REG_32, &irq_invert);
+ if (ret < 0)
+ goto out;
+
+ irq_invert |= BIT(1);
+ ret = wl18xx_top_reg_write(wl, TOP_FN0_CCCR_REG_32, irq_invert);
+ if (ret < 0)
+ goto out;
+
+ ret = wlcore_set_partition(wl, &wl->ptable[PART_PHY_INIT]);
+ }
out:
return ret;
CHANNEL_SWITCH_COMPLETE_EVENT_ID |
DFS_CHANNELS_CONFIG_COMPLETE_EVENT |
SMART_CONFIG_SYNC_EVENT_ID |
- SMART_CONFIG_DECODE_EVENT_ID;
-;
+ SMART_CONFIG_DECODE_EVENT_ID |
+ TIME_SYNC_EVENT_ID;
wl->ap_event_mask = MAX_TX_FAILURE_EVENT_ID;
if (ret < 0)
return ret;
+ /* set the dynamic fw traces bitmap */
+ ret = wl18xx_acx_dynamic_fw_traces(wl);
+ if (ret < 0)
+ return ret;
+
if (checksum_param) {
ret = wl18xx_acx_set_checksum_state(wl);
if (ret != 0)
}
#define WL18XX_CONF_FILE_NAME "ti-connectivity/wl18xx-conf.bin"
-static int wl18xx_conf_init(struct wl1271 *wl, struct device *dev)
+
+static int wl18xx_load_conf_file(struct device *dev, struct wlcore_conf *conf,
+ struct wl18xx_priv_conf *priv_conf)
{
- struct wl18xx_priv *priv = wl->priv;
struct wlcore_conf_file *conf_file;
const struct firmware *fw;
int ret;
if (ret < 0) {
wl1271_error("could not get configuration binary %s: %d",
WL18XX_CONF_FILE_NAME, ret);
- goto out_fallback;
+ return ret;
}
if (fw->size != WL18XX_CONF_SIZE) {
wl1271_error("configuration binary file size is wrong, expected %zu got %zu",
WL18XX_CONF_SIZE, fw->size);
ret = -EINVAL;
- goto out;
+ goto out_release;
}
conf_file = (struct wlcore_conf_file *) fw->data;
"expected 0x%0x got 0x%0x", WL18XX_CONF_MAGIC,
conf_file->header.magic);
ret = -EINVAL;
- goto out;
+ goto out_release;
}
if (conf_file->header.version != cpu_to_le32(WL18XX_CONF_VERSION)) {
"expected 0x%08x got 0x%08x",
WL18XX_CONF_VERSION, conf_file->header.version);
ret = -EINVAL;
- goto out;
+ goto out_release;
}
- memcpy(&wl->conf, &conf_file->core, sizeof(wl18xx_conf));
- memcpy(&priv->conf, &conf_file->priv, sizeof(priv->conf));
+ memcpy(conf, &conf_file->core, sizeof(*conf));
+ memcpy(priv_conf, &conf_file->priv, sizeof(*priv_conf));
- goto out;
+out_release:
+ release_firmware(fw);
+ return ret;
+}
+
+static int wl18xx_conf_init(struct wl1271 *wl, struct device *dev)
+{
+ struct wl18xx_priv *priv = wl->priv;
-out_fallback:
- wl1271_warning("falling back to default config");
+ if (wl18xx_load_conf_file(dev, &wl->conf, &priv->conf) < 0) {
+ wl1271_warning("falling back to default config");
- /* apply driver default configuration */
- memcpy(&wl->conf, &wl18xx_conf, sizeof(wl18xx_conf));
- /* apply default private configuration */
- memcpy(&priv->conf, &wl18xx_default_priv_conf, sizeof(priv->conf));
+ /* apply driver default configuration */
+ memcpy(&wl->conf, &wl18xx_conf, sizeof(wl->conf));
+ /* apply default private configuration */
+ memcpy(&priv->conf, &wl18xx_default_priv_conf,
+ sizeof(priv->conf));
+ }
- /* For now we just fallback */
return 0;
-
-out:
- release_firmware(fw);
- return ret;
}
static int wl18xx_plt_init(struct wl1271 *wl)
static const struct ieee80211_iface_limit wl18xx_iface_limits[] = {
{
- .max = 3,
+ .max = 2,
.types = BIT(NL80211_IFTYPE_STATION),
},
{
BIT(NL80211_IFTYPE_P2P_GO) |
BIT(NL80211_IFTYPE_P2P_CLIENT),
},
+ {
+ .max = 1,
+ .types = BIT(NL80211_IFTYPE_P2P_DEVICE),
+ },
};
static const struct ieee80211_iface_limit wl18xx_iface_ap_limits[] = {
.max = 2,
.types = BIT(NL80211_IFTYPE_AP),
},
+ {
+ .max = 1,
+ .types = BIT(NL80211_IFTYPE_P2P_DEVICE),
+ },
+};
+
+static const struct ieee80211_iface_limit wl18xx_iface_ap_cl_limits[] = {
+ {
+ .max = 1,
+ .types = BIT(NL80211_IFTYPE_STATION),
+ },
+ {
+ .max = 1,
+ .types = BIT(NL80211_IFTYPE_AP),
+ },
+ {
+ .max = 1,
+ .types = BIT(NL80211_IFTYPE_P2P_CLIENT),
+ },
+ {
+ .max = 1,
+ .types = BIT(NL80211_IFTYPE_P2P_DEVICE),
+ },
+};
+
+static const struct ieee80211_iface_limit wl18xx_iface_ap_go_limits[] = {
+ {
+ .max = 1,
+ .types = BIT(NL80211_IFTYPE_STATION),
+ },
+ {
+ .max = 1,
+ .types = BIT(NL80211_IFTYPE_AP),
+ },
+ {
+ .max = 1,
+ .types = BIT(NL80211_IFTYPE_P2P_GO),
+ },
+ {
+ .max = 1,
+ .types = BIT(NL80211_IFTYPE_P2P_DEVICE),
+ },
};
static const struct ieee80211_iface_combination
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Luciano Coelho <coelho@ti.com>");
MODULE_FIRMWARE(WL18XX_FW_NAME);
+MODULE_FIRMWARE(WL18XX_CONF_FILE_NAME);
Code Review / kvmfornfv.git / blobdiff