Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / drivers / net / wireless / ti / wl18xx / conf.h

diff --git a/kernel/drivers/net/wireless/ti/wl18xx/conf.h b/kernel/drivers/net/wireless/ti/wl18xx/conf.h
new file mode 100644 (file)
index 0000000..71f1ec4
--- /dev/null
+++ b/kernel/drivers/net/wireless/ti/wl18xx/conf.h
@@ -0,0 +1,142 @@
+/*
+ * This file is part of wl18xx
+ *
+ * Copyright (C) 2011 Texas Instruments Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL18XX_CONF_H__
+#define __WL18XX_CONF_H__
+
+#define WL18XX_CONF_MAGIC      0x10e100ca
+#define WL18XX_CONF_VERSION    (WLCORE_CONF_VERSION | 0x0007)
+#define WL18XX_CONF_MASK       0x0000ffff
+#define WL18XX_CONF_SIZE       (WLCORE_CONF_SIZE + \
+                                sizeof(struct wl18xx_priv_conf))
+
+#define NUM_OF_CHANNELS_11_ABG 150
+#define NUM_OF_CHANNELS_11_P 7
+#define SRF_TABLE_LEN 16
+#define PIN_MUXING_SIZE 2
+#define WL18XX_TRACE_LOSS_GAPS_TX 10
+#define WL18XX_TRACE_LOSS_GAPS_RX 18
+
+struct wl18xx_mac_and_phy_params {
+       u8 phy_standalone;
+       u8 spare0;
+       u8 enable_clpc;
+       u8 enable_tx_low_pwr_on_siso_rdl;
+       u8 auto_detect;
+       u8 dedicated_fem;
+
+       u8 low_band_component;
+
+       /* Bit 0: One Hot, Bit 1: Control Enable, Bit 2: 1.8V, Bit 3: 3V */
+       u8 low_band_component_type;
+
+       u8 high_band_component;
+
+       /* Bit 0: One Hot, Bit 1: Control Enable, Bit 2: 1.8V, Bit 3: 3V */
+       u8 high_band_component_type;
+       u8 number_of_assembled_ant2_4;
+       u8 number_of_assembled_ant5;
+       u8 pin_muxing_platform_options[PIN_MUXING_SIZE];
+       u8 external_pa_dc2dc;
+       u8 tcxo_ldo_voltage;
+       u8 xtal_itrim_val;
+       u8 srf_state;
+       u8 srf1[SRF_TABLE_LEN];
+       u8 srf2[SRF_TABLE_LEN];
+       u8 srf3[SRF_TABLE_LEN];
+       u8 io_configuration;
+       u8 sdio_configuration;
+       u8 settings;
+       u8 rx_profile;
+       u8 per_chan_pwr_limit_arr_11abg[NUM_OF_CHANNELS_11_ABG];
+       u8 pwr_limit_reference_11_abg;
+       u8 per_chan_pwr_limit_arr_11p[NUM_OF_CHANNELS_11_P];
+       u8 pwr_limit_reference_11p;
+       u8 spare1;
+       u8 per_chan_bo_mode_11_abg[13];
+       u8 per_chan_bo_mode_11_p[4];
+       u8 primary_clock_setting_time;
+       u8 clock_valid_on_wake_up;
+       u8 secondary_clock_setting_time;
+       u8 board_type;
+       /* enable point saturation */
+       u8 psat;
+       /* low/medium/high Tx power in dBm for STA-HP BG */
+       s8 low_power_val;
+       s8 med_power_val;
+       s8 high_power_val;
+       s8 per_sub_band_tx_trace_loss[WL18XX_TRACE_LOSS_GAPS_TX];
+       s8 per_sub_band_rx_trace_loss[WL18XX_TRACE_LOSS_GAPS_RX];
+       u8 tx_rf_margin;
+       /* low/medium/high Tx power in dBm for other role */
+       s8 low_power_val_2nd;
+       s8 med_power_val_2nd;
+       s8 high_power_val_2nd;
+
+       u8 padding[1];
+} __packed;
+
+enum wl18xx_ht_mode {
+       /* Default - use MIMO, fallback to SISO20 */
+       HT_MODE_DEFAULT = 0,
+
+       /* Wide - use SISO40 */
+       HT_MODE_WIDE = 1,
+
+       /* Use SISO20 */
+       HT_MODE_SISO20 = 2,
+};
+
+struct wl18xx_ht_settings {
+       /* DEFAULT / WIDE / SISO20 */
+       u8 mode;
+} __packed;
+
+struct conf_ap_sleep_settings {
+       /* Duty Cycle (20-80% of staying Awake) for IDLE AP
+        * (0: disable)
+        */
+       u8 idle_duty_cycle;
+       /* Duty Cycle (20-80% of staying Awake) for Connected AP
+        * (0: disable)
+        */
+       u8 connected_duty_cycle;
+       /* Maximum stations that are allowed to be connected to AP
+        *  (255: no limit)
+        */
+       u8 max_stations_thresh;
+       /* Timeout till enabling the Sleep Mechanism after data stops
+        * [unit: 100 msec]
+        */
+       u8 idle_conn_thresh;
+} __packed;
+
+struct wl18xx_priv_conf {
+       /* Module params structures */
+       struct wl18xx_ht_settings ht;
+
+       /* this structure is copied wholesale to FW */
+       struct wl18xx_mac_and_phy_params phy;
+
+       struct conf_ap_sleep_settings ap_sleep;
+} __packed;
+
+#endif /* __WL18XX_CONF_H__ */