--- /dev/null
+/*
+ * This file is part of wl1251
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/swab.h>
+#include <linux/crc7.h>
+#include <linux/spi/spi.h>
+#include <linux/wl12xx.h>
+#include <linux/gpio.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/regulator/consumer.h>
+
+#include "wl1251.h"
+#include "reg.h"
+#include "spi.h"
+
+static irqreturn_t wl1251_irq(int irq, void *cookie)
+{
+ struct wl1251 *wl;
+
+ wl1251_debug(DEBUG_IRQ, "IRQ");
+
+ wl = cookie;
+
+ ieee80211_queue_work(wl->hw, &wl->irq_work);
+
+ return IRQ_HANDLED;
+}
+
+static struct spi_device *wl_to_spi(struct wl1251 *wl)
+{
+ return wl->if_priv;
+}
+
+static void wl1251_spi_reset(struct wl1251 *wl)
+{
+ u8 *cmd;
+ struct spi_transfer t;
+ struct spi_message m;
+
+ cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL);
+ if (!cmd) {
+ wl1251_error("could not allocate cmd for spi reset");
+ return;
+ }
+
+ memset(&t, 0, sizeof(t));
+ spi_message_init(&m);
+
+ memset(cmd, 0xff, WSPI_INIT_CMD_LEN);
+
+ t.tx_buf = cmd;
+ t.len = WSPI_INIT_CMD_LEN;
+ spi_message_add_tail(&t, &m);
+
+ spi_sync(wl_to_spi(wl), &m);
+
+ wl1251_dump(DEBUG_SPI, "spi reset -> ", cmd, WSPI_INIT_CMD_LEN);
+
+ kfree(cmd);
+}
+
+static void wl1251_spi_wake(struct wl1251 *wl)
+{
+ struct spi_transfer t;
+ struct spi_message m;
+ u8 *cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL);
+
+ if (!cmd) {
+ wl1251_error("could not allocate cmd for spi init");
+ return;
+ }
+
+ memset(&t, 0, sizeof(t));
+ spi_message_init(&m);
+
+ /* Set WSPI_INIT_COMMAND
+ * the data is being send from the MSB to LSB
+ */
+ cmd[0] = 0xff;
+ cmd[1] = 0xff;
+ cmd[2] = WSPI_INIT_CMD_START | WSPI_INIT_CMD_TX;
+ cmd[3] = 0;
+ cmd[4] = 0;
+ cmd[5] = HW_ACCESS_WSPI_INIT_CMD_MASK << 3;
+ cmd[5] |= HW_ACCESS_WSPI_FIXED_BUSY_LEN & WSPI_INIT_CMD_FIXEDBUSY_LEN;
+
+ cmd[6] = WSPI_INIT_CMD_IOD | WSPI_INIT_CMD_IP | WSPI_INIT_CMD_CS
+ | WSPI_INIT_CMD_WSPI | WSPI_INIT_CMD_WS;
+
+ if (HW_ACCESS_WSPI_FIXED_BUSY_LEN == 0)
+ cmd[6] |= WSPI_INIT_CMD_DIS_FIXEDBUSY;
+ else
+ cmd[6] |= WSPI_INIT_CMD_EN_FIXEDBUSY;
+
+ cmd[7] = crc7_be(0, cmd+2, WSPI_INIT_CMD_CRC_LEN) | WSPI_INIT_CMD_END;
+ /*
+ * The above is the logical order; it must actually be stored
+ * in the buffer byte-swapped.
+ */
+ __swab32s((u32 *)cmd);
+ __swab32s((u32 *)cmd+1);
+
+ t.tx_buf = cmd;
+ t.len = WSPI_INIT_CMD_LEN;
+ spi_message_add_tail(&t, &m);
+
+ spi_sync(wl_to_spi(wl), &m);
+
+ wl1251_dump(DEBUG_SPI, "spi init -> ", cmd, WSPI_INIT_CMD_LEN);
+
+ kfree(cmd);
+}
+
+static void wl1251_spi_reset_wake(struct wl1251 *wl)
+{
+ wl1251_spi_reset(wl);
+ wl1251_spi_wake(wl);
+}
+
+static void wl1251_spi_read(struct wl1251 *wl, int addr, void *buf,
+ size_t len)
+{
+ struct spi_transfer t[3];
+ struct spi_message m;
+ u8 *busy_buf;
+ u32 *cmd;
+
+ cmd = &wl->buffer_cmd;
+ busy_buf = wl->buffer_busyword;
+
+ *cmd = 0;
+ *cmd |= WSPI_CMD_READ;
+ *cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH;
+ *cmd |= addr & WSPI_CMD_BYTE_ADDR;
+
+ spi_message_init(&m);
+ memset(t, 0, sizeof(t));
+
+ t[0].tx_buf = cmd;
+ t[0].len = 4;
+ spi_message_add_tail(&t[0], &m);
+
+ /* Busy and non busy words read */
+ t[1].rx_buf = busy_buf;
+ t[1].len = WL1251_BUSY_WORD_LEN;
+ spi_message_add_tail(&t[1], &m);
+
+ t[2].rx_buf = buf;
+ t[2].len = len;
+ spi_message_add_tail(&t[2], &m);
+
+ spi_sync(wl_to_spi(wl), &m);
+
+ /* FIXME: check busy words */
+
+ wl1251_dump(DEBUG_SPI, "spi_read cmd -> ", cmd, sizeof(*cmd));
+ wl1251_dump(DEBUG_SPI, "spi_read buf <- ", buf, len);
+}
+
+static void wl1251_spi_write(struct wl1251 *wl, int addr, void *buf,
+ size_t len)
+{
+ struct spi_transfer t[2];
+ struct spi_message m;
+ u32 *cmd;
+
+ cmd = &wl->buffer_cmd;
+
+ *cmd = 0;
+ *cmd |= WSPI_CMD_WRITE;
+ *cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH;
+ *cmd |= addr & WSPI_CMD_BYTE_ADDR;
+
+ spi_message_init(&m);
+ memset(t, 0, sizeof(t));
+
+ t[0].tx_buf = cmd;
+ t[0].len = sizeof(*cmd);
+ spi_message_add_tail(&t[0], &m);
+
+ t[1].tx_buf = buf;
+ t[1].len = len;
+ spi_message_add_tail(&t[1], &m);
+
+ spi_sync(wl_to_spi(wl), &m);
+
+ wl1251_dump(DEBUG_SPI, "spi_write cmd -> ", cmd, sizeof(*cmd));
+ wl1251_dump(DEBUG_SPI, "spi_write buf -> ", buf, len);
+}
+
+static void wl1251_spi_enable_irq(struct wl1251 *wl)
+{
+ return enable_irq(wl->irq);
+}
+
+static void wl1251_spi_disable_irq(struct wl1251 *wl)
+{
+ return disable_irq(wl->irq);
+}
+
+static int wl1251_spi_set_power(struct wl1251 *wl, bool enable)
+{
+ if (gpio_is_valid(wl->power_gpio))
+ gpio_set_value(wl->power_gpio, enable);
+
+ return 0;
+}
+
+static const struct wl1251_if_operations wl1251_spi_ops = {
+ .read = wl1251_spi_read,
+ .write = wl1251_spi_write,
+ .reset = wl1251_spi_reset_wake,
+ .enable_irq = wl1251_spi_enable_irq,
+ .disable_irq = wl1251_spi_disable_irq,
+ .power = wl1251_spi_set_power,
+};
+
+static int wl1251_spi_probe(struct spi_device *spi)
+{
+ struct wl1251_platform_data *pdata = dev_get_platdata(&spi->dev);
+ struct device_node *np = spi->dev.of_node;
+ struct ieee80211_hw *hw;
+ struct wl1251 *wl;
+ int ret;
+
+ if (!np && !pdata) {
+ wl1251_error("no platform data");
+ return -ENODEV;
+ }
+
+ hw = wl1251_alloc_hw();
+ if (IS_ERR(hw))
+ return PTR_ERR(hw);
+
+ wl = hw->priv;
+
+ SET_IEEE80211_DEV(hw, &spi->dev);
+ spi_set_drvdata(spi, wl);
+ wl->if_priv = spi;
+ wl->if_ops = &wl1251_spi_ops;
+
+ /* This is the only SPI value that we need to set here, the rest
+ * comes from the board-peripherals file
+ */
+ spi->bits_per_word = 32;
+
+ ret = spi_setup(spi);
+ if (ret < 0) {
+ wl1251_error("spi_setup failed");
+ goto out_free;
+ }
+
+ if (np) {
+ wl->use_eeprom = of_property_read_bool(np, "ti,wl1251-has-eeprom");
+ wl->power_gpio = of_get_named_gpio(np, "ti,power-gpio", 0);
+ } else if (pdata) {
+ wl->power_gpio = pdata->power_gpio;
+ wl->use_eeprom = pdata->use_eeprom;
+ }
+
+ if (wl->power_gpio == -EPROBE_DEFER) {
+ ret = -EPROBE_DEFER;
+ goto out_free;
+ }
+
+ if (gpio_is_valid(wl->power_gpio)) {
+ ret = devm_gpio_request_one(&spi->dev, wl->power_gpio,
+ GPIOF_OUT_INIT_LOW, "wl1251 power");
+ if (ret) {
+ wl1251_error("Failed to request gpio: %d\n", ret);
+ goto out_free;
+ }
+ } else {
+ wl1251_error("set power gpio missing in platform data");
+ ret = -ENODEV;
+ goto out_free;
+ }
+
+ wl->irq = spi->irq;
+ if (wl->irq < 0) {
+ wl1251_error("irq missing in platform data");
+ ret = -ENODEV;
+ goto out_free;
+ }
+
+ irq_set_status_flags(wl->irq, IRQ_NOAUTOEN);
+ ret = devm_request_irq(&spi->dev, wl->irq, wl1251_irq, 0,
+ DRIVER_NAME, wl);
+ if (ret < 0) {
+ wl1251_error("request_irq() failed: %d", ret);
+ goto out_free;
+ }
+
+ irq_set_irq_type(wl->irq, IRQ_TYPE_EDGE_RISING);
+
+ wl->vio = devm_regulator_get(&spi->dev, "vio");
+ if (IS_ERR(wl->vio)) {
+ ret = PTR_ERR(wl->vio);
+ wl1251_error("vio regulator missing: %d", ret);
+ goto out_free;
+ }
+
+ ret = regulator_enable(wl->vio);
+ if (ret)
+ goto out_free;
+
+ ret = wl1251_init_ieee80211(wl);
+ if (ret)
+ goto disable_regulator;
+
+ return 0;
+
+disable_regulator:
+ regulator_disable(wl->vio);
+out_free:
+ ieee80211_free_hw(hw);
+
+ return ret;
+}
+
+static int wl1251_spi_remove(struct spi_device *spi)
+{
+ struct wl1251 *wl = spi_get_drvdata(spi);
+
+ wl1251_free_hw(wl);
+ regulator_disable(wl->vio);
+
+ return 0;
+}
+
+static struct spi_driver wl1251_spi_driver = {
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ },
+
+ .probe = wl1251_spi_probe,
+ .remove = wl1251_spi_remove,
+};
+
+module_spi_driver(wl1251_spi_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Kalle Valo <kvalo@adurom.com>");
+MODULE_ALIAS("spi:wl1251");
Code Review / kvmfornfv.git / blobdiff