--- /dev/null
+/**
+ * Copyright (c) 2014 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/firmware.h>
+#include "rsi_usb.h"
+
+/**
+ * rsi_copy_to_card() - This function includes the actual funtionality of
+ * copying the TA firmware to the card.Basically this
+ * function includes opening the TA file,reading the TA
+ * file and writing their values in blocks of data.
+ * @common: Pointer to the driver private structure.
+ * @fw: Pointer to the firmware value to be written.
+ * @len: length of firmware file.
+ * @num_blocks: Number of blocks to be written to the card.
+ *
+ * Return: 0 on success and -1 on failure.
+ */
+static int rsi_copy_to_card(struct rsi_common *common,
+ const u8 *fw,
+ u32 len,
+ u32 num_blocks)
+{
+ struct rsi_hw *adapter = common->priv;
+ struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
+ u32 indx, ii;
+ u32 block_size = dev->tx_blk_size;
+ u32 lsb_address;
+ u32 base_address;
+
+ base_address = TA_LOAD_ADDRESS;
+
+ for (indx = 0, ii = 0; ii < num_blocks; ii++, indx += block_size) {
+ lsb_address = base_address;
+ if (rsi_usb_write_register_multiple(adapter,
+ lsb_address,
+ (u8 *)(fw + indx),
+ block_size)) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Unable to load %s blk\n", __func__,
+ FIRMWARE_RSI9113);
+ return -EIO;
+ }
+ rsi_dbg(INIT_ZONE, "%s: loading block: %d\n", __func__, ii);
+ base_address += block_size;
+ }
+
+ if (len % block_size) {
+ lsb_address = base_address;
+ if (rsi_usb_write_register_multiple(adapter,
+ lsb_address,
+ (u8 *)(fw + indx),
+ len % block_size)) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Unable to load %s blk\n", __func__,
+ FIRMWARE_RSI9113);
+ return -EIO;
+ }
+ }
+ rsi_dbg(INIT_ZONE,
+ "%s: Succesfully loaded %s instructions\n", __func__,
+ FIRMWARE_RSI9113);
+
+ rsi_dbg(INIT_ZONE, "%s: loaded firmware\n", __func__);
+ return 0;
+}
+
+/**
+ * rsi_usb_rx_thread() - This is a kernel thread to receive the packets from
+ * the USB device.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: None.
+ */
+void rsi_usb_rx_thread(struct rsi_common *common)
+{
+ struct rsi_hw *adapter = common->priv;
+ struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
+ int status;
+
+ do {
+ rsi_wait_event(&dev->rx_thread.event, EVENT_WAIT_FOREVER);
+
+ if (atomic_read(&dev->rx_thread.thread_done))
+ goto out;
+
+ mutex_lock(&common->tx_rxlock);
+ status = rsi_read_pkt(common, 0);
+ if (status) {
+ rsi_dbg(ERR_ZONE, "%s: Failed To read data", __func__);
+ mutex_unlock(&common->tx_rxlock);
+ return;
+ }
+ mutex_unlock(&common->tx_rxlock);
+ rsi_reset_event(&dev->rx_thread.event);
+ if (adapter->rx_urb_submit(adapter)) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Failed in urb submission", __func__);
+ return;
+ }
+ } while (1);
+
+out:
+ rsi_dbg(INFO_ZONE, "%s: Terminated thread\n", __func__);
+ complete_and_exit(&dev->rx_thread.completion, 0);
+}
+
+
+/**
+ * rsi_load_ta_instructions() - This function includes the actual funtionality
+ * of loading the TA firmware.This function also
+ * includes opening the TA file,reading the TA
+ * file and writing their value in blocks of data.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: status: 0 on success, -1 on failure.
+ */
+static int rsi_load_ta_instructions(struct rsi_common *common)
+{
+ struct rsi_hw *adapter = common->priv;
+ struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
+ const struct firmware *fw_entry = NULL;
+ u32 block_size = dev->tx_blk_size;
+ const u8 *fw;
+ u32 num_blocks, len;
+ int status = 0;
+
+ status = request_firmware(&fw_entry, FIRMWARE_RSI9113, adapter->device);
+ if (status < 0) {
+ rsi_dbg(ERR_ZONE, "%s Firmware file %s not found\n",
+ __func__, FIRMWARE_RSI9113);
+ return status;
+ }
+
+ fw = kmemdup(fw_entry->data, fw_entry->size, GFP_KERNEL);
+ len = fw_entry->size;
+
+ if (len % 4)
+ len += (4 - (len % 4));
+
+ num_blocks = (len / block_size);
+
+ rsi_dbg(INIT_ZONE, "%s: Instruction size:%d\n", __func__, len);
+ rsi_dbg(INIT_ZONE, "%s: num blocks: %d\n", __func__, num_blocks);
+
+ status = rsi_copy_to_card(common, fw, len, num_blocks);
+ release_firmware(fw_entry);
+ return status;
+}
+
+/**
+ * rsi_device_init() - This Function Initializes The HAL.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+int rsi_usb_device_init(struct rsi_common *common)
+{
+ if (rsi_load_ta_instructions(common))
+ return -EIO;
+
+ return 0;
+ }
Code Review / kvmfornfv.git / blobdiff