These changes are the raw update to linux-4.4.6-rt14. Kernel sources
[kvmfornfv.git] / kernel / drivers / net / wireless / realtek / rtlwifi / rtl8188ee / pwrseq.c
diff --git a/kernel/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/pwrseq.c b/kernel/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/pwrseq.c
new file mode 100644 (file)
index 0000000..02013df
--- /dev/null
@@ -0,0 +1,105 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2013  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "../pwrseqcmd.h"
+#include "pwrseq.h"
+
+/* drivers should parse below arrays and do the corresponding actions */
+/*3 Power on  Array*/
+struct wlan_pwr_cfg rtl8188ee_power_on_flow[RTL8188EE_TRANS_CARDEMU_TO_ACT_STEPS
+                                       + RTL8188EE_TRANS_END_STEPS] = {
+       RTL8188EE_TRANS_CARDEMU_TO_ACT
+       RTL8188EE_TRANS_END
+};
+
+/*3Radio off GPIO Array */
+struct wlan_pwr_cfg rtl8188ee_radio_off_flow[RTL8188EE_TRANS_ACT_TO_CARDEMU_STEPS
+                                       + RTL8188EE_TRANS_END_STEPS] = {
+       RTL8188EE_TRANS_ACT_TO_CARDEMU
+       RTL8188EE_TRANS_END
+};
+
+/*3Card Disable Array*/
+struct wlan_pwr_cfg rtl8188ee_card_disable_flow
+               [RTL8188EE_TRANS_ACT_TO_CARDEMU_STEPS +
+                RTL8188EE_TRANS_CARDEMU_TO_PDN_STEPS +
+                RTL8188EE_TRANS_END_STEPS] = {
+       RTL8188EE_TRANS_ACT_TO_CARDEMU
+       RTL8188EE_TRANS_CARDEMU_TO_CARDDIS
+       RTL8188EE_TRANS_END
+};
+
+/*3 Card Enable Array*/
+struct wlan_pwr_cfg rtl8188ee_card_enable_flow
+               [RTL8188EE_TRANS_ACT_TO_CARDEMU_STEPS +
+                RTL8188EE_TRANS_CARDEMU_TO_PDN_STEPS +
+                RTL8188EE_TRANS_END_STEPS] = {
+       RTL8188EE_TRANS_CARDDIS_TO_CARDEMU
+       RTL8188EE_TRANS_CARDEMU_TO_ACT
+       RTL8188EE_TRANS_END
+};
+
+/*3Suspend Array*/
+struct wlan_pwr_cfg rtl8188ee_suspend_flow[RTL8188EE_TRANS_ACT_TO_CARDEMU_STEPS
+                                       + RTL8188EE_TRANS_CARDEMU_TO_SUS_STEPS
+                                       + RTL8188EE_TRANS_END_STEPS] = {
+       RTL8188EE_TRANS_ACT_TO_CARDEMU
+       RTL8188EE_TRANS_CARDEMU_TO_SUS
+       RTL8188EE_TRANS_END
+};
+
+/*3 Resume Array*/
+struct wlan_pwr_cfg rtl8188ee_resume_flow[RTL8188EE_TRANS_ACT_TO_CARDEMU_STEPS
+                                       + RTL8188EE_TRANS_CARDEMU_TO_SUS_STEPS
+                                       + RTL8188EE_TRANS_END_STEPS] = {
+       RTL8188EE_TRANS_SUS_TO_CARDEMU
+       RTL8188EE_TRANS_CARDEMU_TO_ACT
+       RTL8188EE_TRANS_END
+};
+
+/*3HWPDN Array*/
+struct wlan_pwr_cfg rtl8188ee_hwpdn_flow[RTL8188EE_TRANS_ACT_TO_CARDEMU_STEPS
+                               + RTL8188EE_TRANS_CARDEMU_TO_PDN_STEPS
+                               + RTL8188EE_TRANS_END_STEPS] = {
+       RTL8188EE_TRANS_ACT_TO_CARDEMU
+       RTL8188EE_TRANS_CARDEMU_TO_PDN
+       RTL8188EE_TRANS_END
+};
+
+/*3 Enter LPS */
+struct wlan_pwr_cfg rtl8188ee_enter_lps_flow[RTL8188EE_TRANS_ACT_TO_LPS_STEPS
+                                       + RTL8188EE_TRANS_END_STEPS] = {
+       /*FW behavior*/
+       RTL8188EE_TRANS_ACT_TO_LPS
+       RTL8188EE_TRANS_END
+};
+
+/*3 Leave LPS */
+struct wlan_pwr_cfg rtl8188ee_leave_lps_flow[RTL8188EE_TRANS_LPS_TO_ACT_STEPS
+                                       + RTL8188EE_TRANS_END_STEPS] = {
+       /*FW behavior*/
+       RTL8188EE_TRANS_LPS_TO_ACT
+       RTL8188EE_TRANS_END
+};