Add the rt linux 4.1.3-rt3 as base
[kvmfornfv.git] / kernel / drivers / net / wireless / orinoco / hermes.h
diff --git a/kernel/drivers/net/wireless/orinoco/hermes.h b/kernel/drivers/net/wireless/orinoco/hermes.h
new file mode 100644 (file)
index 0000000..28a4244
--- /dev/null
@@ -0,0 +1,520 @@
+/* hermes.h
+ *
+ * Driver core for the "Hermes" wireless MAC controller, as used in
+ * the Lucent Orinoco and Cabletron RoamAbout cards. It should also
+ * work on the hfa3841 and hfa3842 MAC controller chips used in the
+ * Prism I & II chipsets.
+ *
+ * This is not a complete driver, just low-level access routines for
+ * the MAC controller itself.
+ *
+ * Based on the prism2 driver from Absolute Value Systems' linux-wlan
+ * project, the Linux wvlan_cs driver, Lucent's HCF-Light
+ * (wvlan_hcf.c) library, and the NetBSD wireless driver.
+ *
+ * Copyright (C) 2000, David Gibson, Linuxcare Australia.
+ * (C) Copyright David Gibson, IBM Corp. 2001-2003.
+ *
+ * Portions taken from hfa384x.h.
+ * Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved.
+ *
+ * This file distributed under the GPL, version 2.
+ */
+
+#ifndef _HERMES_H
+#define _HERMES_H
+
+/* Notes on locking:
+ *
+ * As a module of low level hardware access routines, there is no
+ * locking. Users of this module should ensure that they serialize
+ * access to the hermes structure, and to the hardware
+*/
+
+#include <linux/if_ether.h>
+#include <linux/io.h>
+
+/*
+ * Limits and constants
+ */
+#define                HERMES_ALLOC_LEN_MIN            (4)
+#define                HERMES_ALLOC_LEN_MAX            (2400)
+#define                HERMES_LTV_LEN_MAX              (34)
+#define                HERMES_BAP_DATALEN_MAX          (4096)
+#define                HERMES_BAP_OFFSET_MAX           (4096)
+#define                HERMES_PORTID_MAX               (7)
+#define                HERMES_NUMPORTS_MAX             (HERMES_PORTID_MAX + 1)
+#define                HERMES_PDR_LEN_MAX              (260)   /* in bytes, from EK */
+#define                HERMES_PDA_RECS_MAX             (200)   /* a guess */
+#define                HERMES_PDA_LEN_MAX              (1024)  /* in bytes, from EK */
+#define                HERMES_SCANRESULT_MAX           (35)
+#define                HERMES_CHINFORESULT_MAX         (8)
+#define                HERMES_MAX_MULTICAST            (16)
+#define                HERMES_MAGIC                    (0x7d1f)
+
+/*
+ * Hermes register offsets
+ */
+#define                HERMES_CMD                      (0x00)
+#define                HERMES_PARAM0                   (0x02)
+#define                HERMES_PARAM1                   (0x04)
+#define                HERMES_PARAM2                   (0x06)
+#define                HERMES_STATUS                   (0x08)
+#define                HERMES_RESP0                    (0x0A)
+#define                HERMES_RESP1                    (0x0C)
+#define                HERMES_RESP2                    (0x0E)
+#define                HERMES_INFOFID                  (0x10)
+#define                HERMES_RXFID                    (0x20)
+#define                HERMES_ALLOCFID                 (0x22)
+#define                HERMES_TXCOMPLFID               (0x24)
+#define                HERMES_SELECT0                  (0x18)
+#define                HERMES_OFFSET0                  (0x1C)
+#define                HERMES_DATA0                    (0x36)
+#define                HERMES_SELECT1                  (0x1A)
+#define                HERMES_OFFSET1                  (0x1E)
+#define                HERMES_DATA1                    (0x38)
+#define                HERMES_EVSTAT                   (0x30)
+#define                HERMES_INTEN                    (0x32)
+#define                HERMES_EVACK                    (0x34)
+#define                HERMES_CONTROL                  (0x14)
+#define                HERMES_SWSUPPORT0               (0x28)
+#define                HERMES_SWSUPPORT1               (0x2A)
+#define                HERMES_SWSUPPORT2               (0x2C)
+#define                HERMES_AUXPAGE                  (0x3A)
+#define                HERMES_AUXOFFSET                (0x3C)
+#define                HERMES_AUXDATA                  (0x3E)
+
+/*
+ * CMD register bitmasks
+ */
+#define                HERMES_CMD_BUSY                 (0x8000)
+#define                HERMES_CMD_AINFO                (0x7f00)
+#define                HERMES_CMD_MACPORT              (0x0700)
+#define                HERMES_CMD_RECL                 (0x0100)
+#define                HERMES_CMD_WRITE                (0x0100)
+#define                HERMES_CMD_PROGMODE             (0x0300)
+#define                HERMES_CMD_CMDCODE              (0x003f)
+
+/*
+ * STATUS register bitmasks
+ */
+#define                HERMES_STATUS_RESULT            (0x7f00)
+#define                HERMES_STATUS_CMDCODE           (0x003f)
+
+/*
+ * OFFSET register bitmasks
+ */
+#define                HERMES_OFFSET_BUSY              (0x8000)
+#define                HERMES_OFFSET_ERR               (0x4000)
+#define                HERMES_OFFSET_DATAOFF           (0x0ffe)
+
+/*
+ * Event register bitmasks (INTEN, EVSTAT, EVACK)
+ */
+#define                HERMES_EV_TICK                  (0x8000)
+#define                HERMES_EV_WTERR                 (0x4000)
+#define                HERMES_EV_INFDROP               (0x2000)
+#define                HERMES_EV_INFO                  (0x0080)
+#define                HERMES_EV_DTIM                  (0x0020)
+#define                HERMES_EV_CMD                   (0x0010)
+#define                HERMES_EV_ALLOC                 (0x0008)
+#define                HERMES_EV_TXEXC                 (0x0004)
+#define                HERMES_EV_TX                    (0x0002)
+#define                HERMES_EV_RX                    (0x0001)
+
+/*
+ * Command codes
+ */
+/*--- Controller Commands ----------------------------*/
+#define                HERMES_CMD_INIT                 (0x0000)
+#define                HERMES_CMD_ENABLE               (0x0001)
+#define                HERMES_CMD_DISABLE              (0x0002)
+#define                HERMES_CMD_DIAG                 (0x0003)
+
+/*--- Buffer Mgmt Commands ---------------------------*/
+#define                HERMES_CMD_ALLOC                (0x000A)
+#define                HERMES_CMD_TX                   (0x000B)
+
+/*--- Regulate Commands ------------------------------*/
+#define                HERMES_CMD_NOTIFY               (0x0010)
+#define                HERMES_CMD_INQUIRE              (0x0011)
+
+/*--- Configure Commands -----------------------------*/
+#define                HERMES_CMD_ACCESS               (0x0021)
+#define                HERMES_CMD_DOWNLD               (0x0022)
+
+/*--- Serial I/O Commands ----------------------------*/
+#define                HERMES_CMD_READMIF              (0x0030)
+#define                HERMES_CMD_WRITEMIF             (0x0031)
+
+/*--- Debugging Commands -----------------------------*/
+#define                HERMES_CMD_TEST                 (0x0038)
+
+
+/* Test command arguments */
+#define                HERMES_TEST_SET_CHANNEL         0x0800
+#define                HERMES_TEST_MONITOR             0x0b00
+#define                HERMES_TEST_STOP                0x0f00
+
+/* Authentication algorithms */
+#define                HERMES_AUTH_OPEN                1
+#define                HERMES_AUTH_SHARED_KEY          2
+
+/* WEP settings */
+#define                HERMES_WEP_PRIVACY_INVOKED      0x0001
+#define                HERMES_WEP_EXCL_UNENCRYPTED     0x0002
+#define                HERMES_WEP_HOST_ENCRYPT         0x0010
+#define                HERMES_WEP_HOST_DECRYPT         0x0080
+
+/* Symbol hostscan options */
+#define                HERMES_HOSTSCAN_SYMBOL_5SEC     0x0001
+#define                HERMES_HOSTSCAN_SYMBOL_ONCE     0x0002
+#define                HERMES_HOSTSCAN_SYMBOL_PASSIVE  0x0040
+#define                HERMES_HOSTSCAN_SYMBOL_BCAST    0x0080
+
+/*
+ * Frame structures and constants
+ */
+
+#define HERMES_DESCRIPTOR_OFFSET       0
+#define HERMES_802_11_OFFSET           (14)
+#define HERMES_802_3_OFFSET            (14 + 32)
+#define HERMES_802_2_OFFSET            (14 + 32 + 14)
+#define HERMES_TXCNTL2_OFFSET          (HERMES_802_3_OFFSET - 2)
+
+#define HERMES_RXSTAT_ERR              (0x0003)
+#define        HERMES_RXSTAT_BADCRC            (0x0001)
+#define        HERMES_RXSTAT_UNDECRYPTABLE     (0x0002)
+#define        HERMES_RXSTAT_MIC               (0x0010)        /* Frame contains MIC */
+#define        HERMES_RXSTAT_MACPORT           (0x0700)
+#define HERMES_RXSTAT_PCF              (0x1000)        /* Frame was received in CF period */
+#define        HERMES_RXSTAT_MIC_KEY_ID        (0x1800)        /* MIC key used */
+#define        HERMES_RXSTAT_MSGTYPE           (0xE000)
+#define        HERMES_RXSTAT_1042              (0x2000)        /* RFC-1042 frame */
+#define        HERMES_RXSTAT_TUNNEL            (0x4000)        /* bridge-tunnel encoded frame */
+#define        HERMES_RXSTAT_WMP               (0x6000)        /* Wavelan-II Management Protocol frame */
+
+/* Shift amount for key ID in RXSTAT and TXCTRL */
+#define        HERMES_MIC_KEY_ID_SHIFT         11
+
+struct hermes_tx_descriptor {
+       __le16 status;
+       __le16 reserved1;
+       __le16 reserved2;
+       __le32 sw_support;
+       u8 retry_count;
+       u8 tx_rate;
+       __le16 tx_control;
+} __packed;
+
+#define HERMES_TXSTAT_RETRYERR         (0x0001)
+#define HERMES_TXSTAT_AGEDERR          (0x0002)
+#define HERMES_TXSTAT_DISCON           (0x0004)
+#define HERMES_TXSTAT_FORMERR          (0x0008)
+
+#define HERMES_TXCTRL_TX_OK            (0x0002)        /* ?? interrupt on Tx complete */
+#define HERMES_TXCTRL_TX_EX            (0x0004)        /* ?? interrupt on Tx exception */
+#define HERMES_TXCTRL_802_11           (0x0008)        /* We supply 802.11 header */
+#define HERMES_TXCTRL_MIC              (0x0010)        /* 802.3 + TKIP */
+#define HERMES_TXCTRL_MIC_KEY_ID       (0x1800)        /* MIC Key ID mask */
+#define HERMES_TXCTRL_ALT_RTRY         (0x0020)
+
+/* Inquiry constants and data types */
+
+#define HERMES_INQ_TALLIES             (0xF100)
+#define HERMES_INQ_SCAN                        (0xF101)
+#define HERMES_INQ_CHANNELINFO         (0xF102)
+#define HERMES_INQ_HOSTSCAN            (0xF103)
+#define HERMES_INQ_HOSTSCAN_SYMBOL     (0xF104)
+#define HERMES_INQ_LINKSTATUS          (0xF200)
+#define HERMES_INQ_SEC_STAT_AGERE      (0xF202)
+
+struct hermes_tallies_frame {
+       __le16 TxUnicastFrames;
+       __le16 TxMulticastFrames;
+       __le16 TxFragments;
+       __le16 TxUnicastOctets;
+       __le16 TxMulticastOctets;
+       __le16 TxDeferredTransmissions;
+       __le16 TxSingleRetryFrames;
+       __le16 TxMultipleRetryFrames;
+       __le16 TxRetryLimitExceeded;
+       __le16 TxDiscards;
+       __le16 RxUnicastFrames;
+       __le16 RxMulticastFrames;
+       __le16 RxFragments;
+       __le16 RxUnicastOctets;
+       __le16 RxMulticastOctets;
+       __le16 RxFCSErrors;
+       __le16 RxDiscards_NoBuffer;
+       __le16 TxDiscardsWrongSA;
+       __le16 RxWEPUndecryptable;
+       __le16 RxMsgInMsgFragments;
+       __le16 RxMsgInBadMsgFragments;
+       /* Those last are probably not available in very old firmwares */
+       __le16 RxDiscards_WEPICVError;
+       __le16 RxDiscards_WEPExcluded;
+} __packed;
+
+/* Grabbed from wlan-ng - Thanks Mark... - Jean II
+ * This is the result of a scan inquiry command */
+/* Structure describing info about an Access Point */
+struct prism2_scan_apinfo {
+       __le16 channel;         /* Channel where the AP sits */
+       __le16 noise;           /* Noise level */
+       __le16 level;           /* Signal level */
+       u8 bssid[ETH_ALEN];     /* MAC address of the Access Point */
+       __le16 beacon_interv;   /* Beacon interval */
+       __le16 capabilities;    /* Capabilities */
+       __le16 essid_len;       /* ESSID length */
+       u8 essid[32];           /* ESSID of the network */
+       u8 rates[10];           /* Bit rate supported */
+       __le16 proberesp_rate;  /* Data rate of the response frame */
+       __le16 atim;            /* ATIM window time, Kus (hostscan only) */
+} __packed;
+
+/* Same stuff for the Lucent/Agere card.
+ * Thanks to h1kari <h1kari AT dachb0den.com> - Jean II */
+struct agere_scan_apinfo {
+       __le16 channel;         /* Channel where the AP sits */
+       __le16 noise;           /* Noise level */
+       __le16 level;           /* Signal level */
+       u8 bssid[ETH_ALEN];     /* MAC address of the Access Point */
+       __le16 beacon_interv;   /* Beacon interval */
+       __le16 capabilities;    /* Capabilities */
+       /* bits: 0-ess, 1-ibss, 4-privacy [wep] */
+       __le16 essid_len;       /* ESSID length */
+       u8 essid[32];           /* ESSID of the network */
+} __packed;
+
+/* Moustafa: Scan structure for Symbol cards */
+struct symbol_scan_apinfo {
+       u8 channel;             /* Channel where the AP sits */
+       u8 unknown1;            /* 8 in 2.9x and 3.9x f/w, 0 otherwise */
+       __le16 noise;           /* Noise level */
+       __le16 level;           /* Signal level */
+       u8 bssid[ETH_ALEN];     /* MAC address of the Access Point */
+       __le16 beacon_interv;   /* Beacon interval */
+       __le16 capabilities;    /* Capabilities */
+       /* bits: 0-ess, 1-ibss, 4-privacy [wep] */
+       __le16 essid_len;       /* ESSID length */
+       u8 essid[32];           /* ESSID of the network */
+       __le16 rates[5];        /* Bit rate supported */
+       __le16 basic_rates;     /* Basic rates bitmask */
+       u8 unknown2[6];         /* Always FF:FF:FF:FF:00:00 */
+       u8 unknown3[8];         /* Always 0, appeared in f/w 3.91-68 */
+} __packed;
+
+union hermes_scan_info {
+       struct agere_scan_apinfo        a;
+       struct prism2_scan_apinfo       p;
+       struct symbol_scan_apinfo       s;
+};
+
+/* Extended scan struct for HERMES_INQ_CHANNELINFO.
+ * wl_lkm calls this an ACS scan (Automatic Channel Select).
+ * Keep out of union hermes_scan_info because it is much bigger than
+ * the older scan structures. */
+struct agere_ext_scan_info {
+       __le16  reserved0;
+
+       u8      noise;
+       u8      level;
+       u8      rx_flow;
+       u8      rate;
+       __le16  reserved1[2];
+
+       __le16  frame_control;
+       __le16  dur_id;
+       u8      addr1[ETH_ALEN];
+       u8      addr2[ETH_ALEN];
+       u8      bssid[ETH_ALEN];
+       __le16  sequence;
+       u8      addr4[ETH_ALEN];
+
+       __le16  data_length;
+
+       /* Next 3 fields do not get filled in. */
+       u8      daddr[ETH_ALEN];
+       u8      saddr[ETH_ALEN];
+       __le16  len_type;
+
+       __le64  timestamp;
+       __le16  beacon_interval;
+       __le16  capabilities;
+       u8      data[0];
+} __packed;
+
+#define HERMES_LINKSTATUS_NOT_CONNECTED   (0x0000)
+#define HERMES_LINKSTATUS_CONNECTED       (0x0001)
+#define HERMES_LINKSTATUS_DISCONNECTED    (0x0002)
+#define HERMES_LINKSTATUS_AP_CHANGE       (0x0003)
+#define HERMES_LINKSTATUS_AP_OUT_OF_RANGE (0x0004)
+#define HERMES_LINKSTATUS_AP_IN_RANGE     (0x0005)
+#define HERMES_LINKSTATUS_ASSOC_FAILED    (0x0006)
+
+struct hermes_linkstatus {
+       __le16 linkstatus;         /* Link status */
+} __packed;
+
+struct hermes_response {
+       u16 status, resp0, resp1, resp2;
+};
+
+/* "ID" structure - used for ESSID and station nickname */
+struct hermes_idstring {
+       __le16 len;
+       __le16 val[16];
+} __packed;
+
+struct hermes_multicast {
+       u8 addr[HERMES_MAX_MULTICAST][ETH_ALEN];
+} __packed;
+
+/* Timeouts */
+#define HERMES_BAP_BUSY_TIMEOUT (10000) /* In iterations of ~1us */
+
+struct hermes;
+
+/* Functions to access hardware */
+struct hermes_ops {
+       int (*init)(struct hermes *hw);
+       int (*cmd_wait)(struct hermes *hw, u16 cmd, u16 parm0,
+                       struct hermes_response *resp);
+       int (*init_cmd_wait)(struct hermes *hw, u16 cmd,
+                            u16 parm0, u16 parm1, u16 parm2,
+                            struct hermes_response *resp);
+       int (*allocate)(struct hermes *hw, u16 size, u16 *fid);
+       int (*read_ltv)(struct hermes *hw, int bap, u16 rid, unsigned buflen,
+                       u16 *length, void *buf);
+       int (*write_ltv)(struct hermes *hw, int bap, u16 rid,
+                        u16 length, const void *value);
+       int (*bap_pread)(struct hermes *hw, int bap, void *buf, int len,
+                        u16 id, u16 offset);
+       int (*bap_pwrite)(struct hermes *hw, int bap, const void *buf,
+                         int len, u16 id, u16 offset);
+       int (*read_pda)(struct hermes *hw, __le16 *pda,
+                       u32 pda_addr, u16 pda_len);
+       int (*program_init)(struct hermes *hw, u32 entry_point);
+       int (*program_end)(struct hermes *hw);
+       int (*program)(struct hermes *hw, const char *buf,
+                      u32 addr, u32 len);
+       void (*lock_irqsave)(spinlock_t *lock, unsigned long *flags);
+       void (*unlock_irqrestore)(spinlock_t *lock, unsigned long *flags);
+       void (*lock_irq)(spinlock_t *lock);
+       void (*unlock_irq)(spinlock_t *lock);
+};
+
+/* Basic control structure */
+struct hermes {
+       void __iomem *iobase;
+       int reg_spacing;
+#define HERMES_16BIT_REGSPACING        0
+#define HERMES_32BIT_REGSPACING        1
+       u16 inten; /* Which interrupts should be enabled? */
+       bool eeprom_pda;
+       const struct hermes_ops *ops;
+       void *priv;
+};
+
+/* Register access convenience macros */
+#define hermes_read_reg(hw, off) \
+       (ioread16((hw)->iobase + ((off) << (hw)->reg_spacing)))
+#define hermes_write_reg(hw, off, val) \
+       (iowrite16((val), (hw)->iobase + ((off) << (hw)->reg_spacing)))
+#define hermes_read_regn(hw, name) hermes_read_reg((hw), HERMES_##name)
+#define hermes_write_regn(hw, name, val) \
+       hermes_write_reg((hw), HERMES_##name, (val))
+
+/* Function prototypes */
+void hermes_struct_init(struct hermes *hw, void __iomem *address,
+                       int reg_spacing);
+
+/* Inline functions */
+
+static inline int hermes_present(struct hermes *hw)
+{
+       return hermes_read_regn(hw, SWSUPPORT0) == HERMES_MAGIC;
+}
+
+static inline void hermes_set_irqmask(struct hermes *hw, u16 events)
+{
+       hw->inten = events;
+       hermes_write_regn(hw, INTEN, events);
+}
+
+static inline int hermes_enable_port(struct hermes *hw, int port)
+{
+       return hw->ops->cmd_wait(hw, HERMES_CMD_ENABLE | (port << 8),
+                                0, NULL);
+}
+
+static inline int hermes_disable_port(struct hermes *hw, int port)
+{
+       return hw->ops->cmd_wait(hw, HERMES_CMD_DISABLE | (port << 8),
+                                0, NULL);
+}
+
+/* Initiate an INQUIRE command (tallies or scan).  The result will come as an
+ * information frame in __orinoco_ev_info() */
+static inline int hermes_inquire(struct hermes *hw, u16 rid)
+{
+       return hw->ops->cmd_wait(hw, HERMES_CMD_INQUIRE, rid, NULL);
+}
+
+#define HERMES_BYTES_TO_RECLEN(n) ((((n) + 1) / 2) + 1)
+#define HERMES_RECLEN_TO_BYTES(n) (((n) - 1) * 2)
+
+/* Note that for the next two, the count is in 16-bit words, not bytes */
+static inline void hermes_read_words(struct hermes *hw, int off,
+                                    void *buf, unsigned count)
+{
+       off = off << hw->reg_spacing;
+       ioread16_rep(hw->iobase + off, buf, count);
+}
+
+static inline void hermes_write_bytes(struct hermes *hw, int off,
+                                     const char *buf, unsigned count)
+{
+       off = off << hw->reg_spacing;
+       iowrite16_rep(hw->iobase + off, buf, count >> 1);
+       if (unlikely(count & 1))
+               iowrite8(buf[count - 1], hw->iobase + off);
+}
+
+static inline void hermes_clear_words(struct hermes *hw, int off,
+                                     unsigned count)
+{
+       unsigned i;
+
+       off = off << hw->reg_spacing;
+
+       for (i = 0; i < count; i++)
+               iowrite16(0, hw->iobase + off);
+}
+
+#define HERMES_READ_RECORD(hw, bap, rid, buf) \
+       (hw->ops->read_ltv((hw), (bap), (rid), sizeof(*buf), NULL, (buf)))
+#define HERMES_WRITE_RECORD(hw, bap, rid, buf) \
+       (hw->ops->write_ltv((hw), (bap), (rid), \
+                           HERMES_BYTES_TO_RECLEN(sizeof(*buf)), (buf)))
+
+static inline int hermes_read_wordrec(struct hermes *hw, int bap, u16 rid,
+                                     u16 *word)
+{
+       __le16 rec;
+       int err;
+
+       err = HERMES_READ_RECORD(hw, bap, rid, &rec);
+       *word = le16_to_cpu(rec);
+       return err;
+}
+
+static inline int hermes_write_wordrec(struct hermes *hw, int bap, u16 rid,
+                                      u16 word)
+{
+       __le16 rec = cpu_to_le16(word);
+       return HERMES_WRITE_RECORD(hw, bap, rid, &rec);
+}
+
+#endif  /* _HERMES_H */