* GPL LICENSE SUMMARY
*
* Copyright(c) 2008 - 2014 Intel Corporation. All rights reserved.
- * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH
+ * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* BSD LICENSE
*
* Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved.
- * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH
+ * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
IWL_UCODE_TLV_API_CHANGES_SET = 29,
IWL_UCODE_TLV_ENABLED_CAPABILITIES = 30,
IWL_UCODE_TLV_N_SCAN_CHANNELS = 31,
+ IWL_UCODE_TLV_PAGING = 32,
IWL_UCODE_TLV_SEC_RT_USNIFFER = 34,
IWL_UCODE_TLV_SDIO_ADMA_ADDR = 35,
IWL_UCODE_TLV_FW_VERSION = 36,
IWL_UCODE_TLV_FW_DBG_DEST = 38,
IWL_UCODE_TLV_FW_DBG_CONF = 39,
IWL_UCODE_TLV_FW_DBG_TRIGGER = 40,
+ IWL_UCODE_TLV_FW_GSCAN_CAPA = 50,
};
struct iwl_ucode_tlv {
IWL_UCODE_TLV_FLAGS_GO_UAPSD = BIT(30),
};
+typedef unsigned int __bitwise__ iwl_ucode_tlv_api_t;
+
/**
* enum iwl_ucode_tlv_api - ucode api
* @IWL_UCODE_TLV_API_BT_COEX_SPLIT: new API for BT Coex
* @IWL_UCODE_TLV_API_FRAGMENTED_SCAN: This ucode supports active dwell time
* longer than the passive one, which is essential for fragmented scan.
* @IWL_UCODE_TLV_API_WIFI_MCC_UPDATE: ucode supports MCC updates with source.
- * IWL_UCODE_TLV_API_HDC_PHASE_0: ucode supports finer configuration of LTR
- * @IWL_UCODE_TLV_API_TX_POWER_DEV: new API for tx power.
- * @IWL_UCODE_TLV_API_BASIC_DWELL: use only basic dwell time in scan command,
- * regardless of the band or the number of the probes. FW will calculate
- * the actual dwell time.
- * @IWL_UCODE_TLV_API_SCD_CFG: This firmware can configure the scheduler
- * through the dedicated host command.
- * @IWL_UCODE_TLV_API_SINGLE_SCAN_EBS: EBS is supported for single scans too.
- * @IWL_UCODE_TLV_API_ASYNC_DTM: Async temperature notifications are supported.
+ * @IWL_UCODE_TLV_API_WIDE_CMD_HDR: ucode supports wide command header
* @IWL_UCODE_TLV_API_LQ_SS_PARAMS: Configure STBC/BFER via LQ CMD ss_params
- * @IWL_UCODE_TLV_API_STATS_V10: uCode supports/uses statistics API version 10
* @IWL_UCODE_TLV_API_NEW_VERSION: new versioning format
+ * @IWL_UCODE_TLV_API_EXT_SCAN_PRIORITY: scan APIs use 8-level priority
+ * instead of 3.
+ * @IWL_UCODE_TLV_API_TX_POWER_CHAIN: TX power API has larger command size
+ * (command version 3) that supports per-chain limits
+ *
+ * @NUM_IWL_UCODE_TLV_API: number of bits used
*/
enum iwl_ucode_tlv_api {
- IWL_UCODE_TLV_API_BT_COEX_SPLIT = BIT(3),
- IWL_UCODE_TLV_API_FRAGMENTED_SCAN = BIT(8),
- IWL_UCODE_TLV_API_WIFI_MCC_UPDATE = BIT(9),
- IWL_UCODE_TLV_API_HDC_PHASE_0 = BIT(10),
- IWL_UCODE_TLV_API_TX_POWER_DEV = BIT(11),
- IWL_UCODE_TLV_API_BASIC_DWELL = BIT(13),
- IWL_UCODE_TLV_API_SCD_CFG = BIT(15),
- IWL_UCODE_TLV_API_SINGLE_SCAN_EBS = BIT(16),
- IWL_UCODE_TLV_API_ASYNC_DTM = BIT(17),
- IWL_UCODE_TLV_API_LQ_SS_PARAMS = BIT(18),
- IWL_UCODE_TLV_API_STATS_V10 = BIT(19),
- IWL_UCODE_TLV_API_NEW_VERSION = BIT(20),
+ IWL_UCODE_TLV_API_BT_COEX_SPLIT = (__force iwl_ucode_tlv_api_t)3,
+ IWL_UCODE_TLV_API_FRAGMENTED_SCAN = (__force iwl_ucode_tlv_api_t)8,
+ IWL_UCODE_TLV_API_WIFI_MCC_UPDATE = (__force iwl_ucode_tlv_api_t)9,
+ IWL_UCODE_TLV_API_WIDE_CMD_HDR = (__force iwl_ucode_tlv_api_t)14,
+ IWL_UCODE_TLV_API_LQ_SS_PARAMS = (__force iwl_ucode_tlv_api_t)18,
+ IWL_UCODE_TLV_API_NEW_VERSION = (__force iwl_ucode_tlv_api_t)20,
+ IWL_UCODE_TLV_API_EXT_SCAN_PRIORITY = (__force iwl_ucode_tlv_api_t)24,
+ IWL_UCODE_TLV_API_TX_POWER_CHAIN = (__force iwl_ucode_tlv_api_t)27,
+
+ NUM_IWL_UCODE_TLV_API
+#ifdef __CHECKER__
+ /* sparse says it cannot increment the previous enum member */
+ = 128
+#endif
};
+typedef unsigned int __bitwise__ iwl_ucode_tlv_capa_t;
+
/**
* enum iwl_ucode_tlv_capa - ucode capabilities
* @IWL_UCODE_TLV_CAPA_D0I3_SUPPORT: supports D0i3
* @IWL_UCODE_TLV_CAPA_LAR_SUPPORT: supports Location Aware Regulatory
* @IWL_UCODE_TLV_CAPA_UMAC_SCAN: supports UMAC scan.
* @IWL_UCODE_TLV_CAPA_BEAMFORMER: supports Beamformer
+ * @IWL_UCODE_TLV_CAPA_TOF_SUPPORT: supports Time of Flight (802.11mc FTM)
* @IWL_UCODE_TLV_CAPA_TDLS_SUPPORT: support basic TDLS functionality
* @IWL_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT: supports insertion of current
* tx power value into TPC Report action frame and Link Measurement Report
* which also implies support for the scheduler configuration command
* @IWL_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH: supports TDLS channel switching
* @IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT: supports Hot Spot Command
+ * @IWL_UCODE_TLV_CAPA_DC2DC_SUPPORT: supports DC2DC Command
+ * @IWL_UCODE_TLV_CAPA_CSUM_SUPPORT: supports TCP Checksum Offload
* @IWL_UCODE_TLV_CAPA_RADIO_BEACON_STATS: support radio and beacon statistics
* @IWL_UCODE_TLV_CAPA_BT_COEX_PLCR: enabled BT Coex packet level co-running
* @IWL_UCODE_TLV_CAPA_LAR_MULTI_MCC: ucode supports LAR updates with different
* IWL_UCODE_TLV_API_WIFI_MCC_UPDATE. When either is set, multi-source LAR
* is supported.
* @IWL_UCODE_TLV_CAPA_BT_COEX_RRC: supports BT Coex RRC
+ * @IWL_UCODE_TLV_CAPA_GSCAN_SUPPORT: supports gscan
+ * @IWL_UCODE_TLV_CAPA_EXTENDED_DTS_MEASURE: extended DTS measurement
+ * @IWL_UCODE_TLV_CAPA_SHORT_PM_TIMEOUTS: supports short PM timeouts
+ *
+ * @NUM_IWL_UCODE_TLV_CAPA: number of bits used
*/
enum iwl_ucode_tlv_capa {
- IWL_UCODE_TLV_CAPA_D0I3_SUPPORT = BIT(0),
- IWL_UCODE_TLV_CAPA_LAR_SUPPORT = BIT(1),
- IWL_UCODE_TLV_CAPA_UMAC_SCAN = BIT(2),
- IWL_UCODE_TLV_CAPA_BEAMFORMER = BIT(3),
- IWL_UCODE_TLV_CAPA_TDLS_SUPPORT = BIT(6),
- IWL_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT = BIT(8),
- IWL_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT = BIT(9),
- IWL_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT = BIT(10),
- IWL_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT = BIT(11),
- IWL_UCODE_TLV_CAPA_DQA_SUPPORT = BIT(12),
- IWL_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH = BIT(13),
- IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT = BIT(18),
- IWL_UCODE_TLV_CAPA_RADIO_BEACON_STATS = BIT(22),
- IWL_UCODE_TLV_CAPA_BT_COEX_PLCR = BIT(28),
- IWL_UCODE_TLV_CAPA_LAR_MULTI_MCC = BIT(29),
- IWL_UCODE_TLV_CAPA_BT_COEX_RRC = BIT(30),
+ IWL_UCODE_TLV_CAPA_D0I3_SUPPORT = (__force iwl_ucode_tlv_capa_t)0,
+ IWL_UCODE_TLV_CAPA_LAR_SUPPORT = (__force iwl_ucode_tlv_capa_t)1,
+ IWL_UCODE_TLV_CAPA_UMAC_SCAN = (__force iwl_ucode_tlv_capa_t)2,
+ IWL_UCODE_TLV_CAPA_BEAMFORMER = (__force iwl_ucode_tlv_capa_t)3,
+ IWL_UCODE_TLV_CAPA_TOF_SUPPORT = (__force iwl_ucode_tlv_capa_t)5,
+ IWL_UCODE_TLV_CAPA_TDLS_SUPPORT = (__force iwl_ucode_tlv_capa_t)6,
+ IWL_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT = (__force iwl_ucode_tlv_capa_t)8,
+ IWL_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT = (__force iwl_ucode_tlv_capa_t)9,
+ IWL_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT = (__force iwl_ucode_tlv_capa_t)10,
+ IWL_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT = (__force iwl_ucode_tlv_capa_t)11,
+ IWL_UCODE_TLV_CAPA_DQA_SUPPORT = (__force iwl_ucode_tlv_capa_t)12,
+ IWL_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH = (__force iwl_ucode_tlv_capa_t)13,
+ IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT = (__force iwl_ucode_tlv_capa_t)18,
+ IWL_UCODE_TLV_CAPA_DC2DC_CONFIG_SUPPORT = (__force iwl_ucode_tlv_capa_t)19,
+ IWL_UCODE_TLV_CAPA_CSUM_SUPPORT = (__force iwl_ucode_tlv_capa_t)21,
+ IWL_UCODE_TLV_CAPA_RADIO_BEACON_STATS = (__force iwl_ucode_tlv_capa_t)22,
+ IWL_UCODE_TLV_CAPA_BT_COEX_PLCR = (__force iwl_ucode_tlv_capa_t)28,
+ IWL_UCODE_TLV_CAPA_LAR_MULTI_MCC = (__force iwl_ucode_tlv_capa_t)29,
+ IWL_UCODE_TLV_CAPA_BT_COEX_RRC = (__force iwl_ucode_tlv_capa_t)30,
+ IWL_UCODE_TLV_CAPA_GSCAN_SUPPORT = (__force iwl_ucode_tlv_capa_t)31,
+ IWL_UCODE_TLV_CAPA_EXTENDED_DTS_MEASURE = (__force iwl_ucode_tlv_capa_t)64,
+ IWL_UCODE_TLV_CAPA_SHORT_PM_TIMEOUTS = (__force iwl_ucode_tlv_capa_t)65,
+
+ NUM_IWL_UCODE_TLV_CAPA
+#ifdef __CHECKER__
+ /* sparse says it cannot increment the previous enum member */
+ = 128
+#endif
};
/* The default calibrate table size if not specified by firmware file */
* For 16.0 uCode and above, there is no differentiation between sections,
* just an offset to the HW address.
*/
-#define IWL_UCODE_SECTION_MAX 12
-#define IWL_API_ARRAY_SIZE 1
-#define IWL_CAPABILITIES_ARRAY_SIZE 1
+#define IWL_UCODE_SECTION_MAX 16
#define CPU1_CPU2_SEPARATOR_SECTION 0xFFFFCCCC
+#define PAGING_SEPARATOR_SECTION 0xAAAABBBB
/* uCode version contains 4 values: Major/Minor/API/Serial */
#define IWL_UCODE_MAJOR(ver) (((ver) & 0xFF000000) >> 24)
PRPH_ASSIGN,
PRPH_SETBIT,
PRPH_CLEARBIT,
+
+ INDIRECT_ASSIGN,
+ INDIRECT_SETBIT,
+ INDIRECT_CLEARBIT,
+
+ PRPH_BLOCKBIT,
};
/**
* @SMEM_MODE: monitor stores the data in SMEM
* @EXTERNAL_MODE: monitor stores the data in allocated DRAM
* @MARBH_MODE: monitor stores the data in MARBH buffer
+ * @MIPI_MODE: monitor outputs the data through the MIPI interface
*/
enum iwl_fw_dbg_monitor_mode {
SMEM_MODE = 0,
EXTERNAL_MODE = 1,
MARBH_MODE = 2,
+ MIPI_MODE = 3,
};
/**
*
* @version: version of the TLV - currently 0
* @monitor_mode: %enum iwl_fw_dbg_monitor_mode
+ * @size_power: buffer size will be 2^(size_power + 11)
* @base_reg: addr of the base addr register (PRPH)
* @end_reg: addr of the end addr register (PRPH)
* @write_ptr_reg: the addr of the reg of the write pointer
struct iwl_fw_dbg_dest_tlv {
u8 version;
u8 monitor_mode;
- u8 reserved[2];
+ u8 size_power;
+ u8 reserved;
__le32 base_reg;
__le32 end_reg;
__le32 write_ptr_reg;
*
* @IWL_FW_DBG_TRIGGER_START: when trigger occurs re-conf the dbg mechanism
* @IWL_FW_DBG_TRIGGER_STOP: when trigger occurs pull the dbg data
+ * @IWL_FW_DBG_TRIGGER_MONITOR_ONLY: when trigger occurs trigger is set to
+ * collect only monitor data
*/
enum iwl_fw_dbg_trigger_mode {
IWL_FW_DBG_TRIGGER_START = BIT(0),
IWL_FW_DBG_TRIGGER_STOP = BIT(1),
+ IWL_FW_DBG_TRIGGER_MONITOR_ONLY = BIT(2),
};
/**
} __packed time_events[16];
} __packed;
+/**
+ * struct iwl_fw_dbg_trigger_ba - configures BlockAck related trigger
+ * rx_ba_start: tid bitmap to configure on what tid the trigger should occur
+ * when an Rx BlockAck session is started.
+ * rx_ba_stop: tid bitmap to configure on what tid the trigger should occur
+ * when an Rx BlockAck session is stopped.
+ * tx_ba_start: tid bitmap to configure on what tid the trigger should occur
+ * when a Tx BlockAck session is started.
+ * tx_ba_stop: tid bitmap to configure on what tid the trigger should occur
+ * when a Tx BlockAck session is stopped.
+ * rx_bar: tid bitmap to configure on what tid the trigger should occur
+ * when a BAR is received (for a Tx BlockAck session).
+ * tx_bar: tid bitmap to configure on what tid the trigger should occur
+ * when a BAR is send (for an Rx BlocAck session).
+ * frame_timeout: tid bitmap to configure on what tid the trigger should occur
+ * when a frame times out in the reodering buffer.
+ */
+struct iwl_fw_dbg_trigger_ba {
+ __le16 rx_ba_start;
+ __le16 rx_ba_stop;
+ __le16 tx_ba_start;
+ __le16 tx_ba_stop;
+ __le16 rx_bar;
+ __le16 tx_bar;
+ __le16 frame_timeout;
+} __packed;
+
/**
* struct iwl_fw_dbg_conf_tlv - a TLV that describes a debug configuration.
* @id: conf id
struct iwl_fw_dbg_conf_hcmd hcmd;
} __packed;
+/**
+ * struct iwl_fw_gscan_capabilities - gscan capabilities supported by FW
+ * @max_scan_cache_size: total space allocated for scan results (in bytes).
+ * @max_scan_buckets: maximum number of channel buckets.
+ * @max_ap_cache_per_scan: maximum number of APs that can be stored per scan.
+ * @max_rssi_sample_size: number of RSSI samples used for averaging RSSI.
+ * @max_scan_reporting_threshold: max possible report threshold. in percentage.
+ * @max_hotlist_aps: maximum number of entries for hotlist APs.
+ * @max_significant_change_aps: maximum number of entries for significant
+ * change APs.
+ * @max_bssid_history_entries: number of BSSID/RSSI entries that the device can
+ * hold.
+ */
+struct iwl_fw_gscan_capabilities {
+ __le32 max_scan_cache_size;
+ __le32 max_scan_buckets;
+ __le32 max_ap_cache_per_scan;
+ __le32 max_rssi_sample_size;
+ __le32 max_scan_reporting_threshold;
+ __le32 max_hotlist_aps;
+ __le32 max_significant_change_aps;
+ __le32 max_bssid_history_entries;
+} __packed;
+
#endif /* __iwl_fw_file_h__ */
Code Review / kvmfornfv.git / blobdiff