Add the rt linux 4.1.3-rt3 as base

[kvmfornfv.git] / kernel / drivers / net / wireless / hostap / Kconfig

diff --git a/kernel/drivers/net/wireless/hostap/Kconfig b/kernel/drivers/net/wireless/hostap/Kconfig
new file mode 100644 (file)
index 0000000..287d827
--- /dev/null
+++ b/kernel/drivers/net/wireless/hostap/Kconfig
@@ -0,0 +1,98 @@
+config HOSTAP
+       tristate "IEEE 802.11 for Host AP (Prism2/2.5/3 and WEP/TKIP/CCMP)"
+       select WIRELESS_EXT
+       select WEXT_SPY
+       select WEXT_PRIV
+       select CRYPTO
+       select CRYPTO_ARC4
+       select CRYPTO_ECB
+       select CRYPTO_AES
+       select CRYPTO_MICHAEL_MIC
+       select CRYPTO_ECB
+       select CRC32
+       select LIB80211
+       select LIB80211_CRYPT_WEP
+       select LIB80211_CRYPT_TKIP
+       select LIB80211_CRYPT_CCMP
+       ---help---
+       Shared driver code for IEEE 802.11b wireless cards based on
+       Intersil Prism2/2.5/3 chipset. This driver supports so called
+       Host AP mode that allows the card to act as an IEEE 802.11
+       access point.
+
+       See <http://hostap.epitest.fi/> for more information about the
+       Host AP driver configuration and tools. This site includes
+       information and tools (hostapd and wpa_supplicant) for WPA/WPA2
+       support.
+
+       This option includes the base Host AP driver code that is shared by
+       different hardware models. You will also need to enable support for
+       PLX/PCI/CS version of the driver to actually use the driver.
+
+       The driver can be compiled as a module and it will be called
+       hostap.
+
+config HOSTAP_FIRMWARE
+       bool "Support downloading firmware images with Host AP driver"
+       depends on HOSTAP
+       ---help---
+       Configure Host AP driver to include support for firmware image
+       download. This option by itself only enables downloading to the
+       volatile memory, i.e. the card RAM. This option is required to
+       support cards that don't have firmware in flash, such as D-Link
+       DWL-520 rev E and D-Link DWL-650 rev P.
+
+       Firmware image downloading needs a user space tool, prism2_srec.
+       It is available from http://hostap.epitest.fi/.
+
+config HOSTAP_FIRMWARE_NVRAM
+       bool "Support for non-volatile firmware download"
+       depends on HOSTAP_FIRMWARE
+       ---help---
+       Allow Host AP driver to write firmware images to the non-volatile
+       card memory, i.e. flash memory that survives power cycling.
+       Enable this option if you want to be able to change card firmware
+       permanently.
+
+       Firmware image downloading needs a user space tool, prism2_srec.
+       It is available from http://hostap.epitest.fi/.
+
+config HOSTAP_PLX
+       tristate "Host AP driver for Prism2/2.5/3 in PLX9052 PCI adaptors"
+       depends on PCI && HOSTAP
+       ---help---
+       Host AP driver's version for Prism2/2.5/3 PC Cards in PLX9052 based
+       PCI adaptors.
+
+       "Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this
+       driver and its help text includes more information about the Host AP
+       driver.
+
+       The driver can be compiled as a module and will be named
+       hostap_plx.
+
+config HOSTAP_PCI
+       tristate "Host AP driver for Prism2.5 PCI adaptors"
+       depends on PCI && HOSTAP
+       ---help---
+       Host AP driver's version for Prism2.5 PCI adaptors.
+
+       "Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this
+       driver and its help text includes more information about the Host AP
+       driver.
+
+       The driver can be compiled as a module and will be named
+       hostap_pci.
+
+config HOSTAP_CS
+       tristate "Host AP driver for Prism2/2.5/3 PC Cards"
+       depends on PCMCIA && HOSTAP
+       ---help---
+       Host AP driver's version for Prism2/2.5/3 PC Cards.
+
+       "Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this
+       driver and its help text includes more information about the Host AP
+       driver.
+
+       The driver can be compiled as a module and will be named
+       hostap_cs.